1. How to Make a Concrete Countertop
How to Make a Concrete Countertop
Concrete countertops in household kitchens are really gaining in popularity lately. They're not all
that expensive to build in terms of materials. The big issue is labor. Building a concrete countertop is
a great DIY project but keep in mind that it's not a trivial project for the first timer. Want to know
how to make a concrete countertop? Read on!
Building Materials for a Concrete CountertopCementColoring PigmentGravelSealantThe proper
concrete formSink and faucet knockoutsMelamineSilicone caulkBuilding the Concrete Countertop
Form
First, make a choice of where to build the countertop. The countertop can be built off-property and
then installed in the kitchen, or built right on the kitchen cabinet. Building on the kitchen counter
will save the hassle of moving the completed countertop.
Think of the form as a shallow box with knockouts precisely positioned for sink, faucets, etc. The
horizontal strength of the concrete form comes from wood boards, just as with concrete forms for
patios, driveways, etc. This particular form uses 2" X 4" boards for the outside edge of the
countertop. Since pine is porous as well as rough, melamine strips (melamine is a form of vinyl) are
2. added on the inside of the form. This allows for a slick, smooth surface.
Place a solid melamine sheet in the bottom of the form. This may be removed later, after the
concrete has cured sufficiently.
Cover any bare wood with electrical tape. This prevents the wet concrete from sticking to the wood.
Now apply a bead of silicone caulk to the inner corners of the form. Do this carefully so the
completed countertop's edges will be smooth and rounded.
Use Knockouts for the Sink and Faucets
Knockouts for the sink and faucets are easy to use. They contribute to the cost of the concrete
countertop project, but they simplify things and ensure a professional looking finish.
The thing to focus on when using these knockouts is placing them precisely where they belong.
Cured concrete isn't very cooperative if this step isn't right.
Once they're properly placed, set steel mesh inside the form for reinforcement. Keep it within, but
not past, an inch of the edges.
Not only will steel reinforcing mesh lend strength to the concrete countertop, but it also minimizes
cracking that happens when the cement and aggregates dry and cure.
Pour the Concrete
There are actually two concrete pours. The first concrete pour is just drier-than-usual concrete. The
following pour contains the other ingredients which will give the countertop color and beauty. This
mixture won't be self-leveling because of its dryer nature. Take care to tamp it down by hand. It's
critical to eliminate all air pockets in the concrete mix.
After the counter has cured for approximately two hours, start troweling the concrete with a steel
trowel. Don't get overly aggressive with it. This will draw the concrete aggregates upwards. The
entire countertop will be weak after curing.
Finally, Remove the Form from the Finished Countertop
Let the concrete cure for at least 24 hours before removing the form from the finished countertop,
removing the knockouts, and applying the sealant. If the project is taking place in a dry climate,
maintain a moist burlap cloth on the exposed countertop. The longer it cures, the more strength the
finished product will have. Remove the form carefully. If it hasn't been built on the counter, move it
there carefully. Have one or two buddies help. It needs to be shown off anyway!
http://www.suite101.com/content/how-to-make-a-concrete-countertop-a37669