The document summarizes pre-assembled blast room systems from Clemco Industries. The systems include an enclosure, blast machine, recovery system, dust collector, and other equipment assembled and installed as a turnkey solution. Key features are quick setup, low cost, flexibility to customize the recovery system for different media types, and support from Clemco's distributor network. The systems meet all applicable safety and ventilation standards for abrasive blasting.
Perkin elmer series 4400 and 2400 sputter deposition systems
Pre assembled blast_room
1.
2. Pre-Assembled Blast Rooms
N No Pit Required
N Quickest Set-Up ystems are available with mechanical
N Lowest Total Cost for Complete
System
Standard
Systems Meet
S recovery with airwash abrasive
cleaner, or pneumatic recovery with
N Enclosure, Blast Machine, cyclone separator to let you tailor the
All Blasting
Operator Safety Equipment, Recovery, pre-assembled room to your application.
Reclaimer, and Dust Collector Needs
For most recyclable media, from
N Turnkey or Do-It-Yourself Installation coarse ALOX to steel grit and shot,
N An Industrial Blast Facility choose the Flat-Trak low-profile recovery
floor coupled to a bucket elevator and
air-wash abrasive cleaner. For fine glass
bead and ALOX, or other light-weight
media, the M-Section pneumatic recovery
floor and cyclonic reclaimer work best.
T
he pre-assembled blast The standard blast machine package
room is built on a rigid includes a 6 cu. ft. blast machine, flexi-
structural steel floor, ble Supa blast hose and carbide nozzle,
with 10-gauge steel pneumatic remote control system, and an
Apollo 600 respirator with CPF air filter.
walls and 16-gauge steel ceiling, Plastic media, wheat starch, or other
1-1/2 inch thick floor grating, lightweight media require a special blast
and full-height, full-width work machine with steep cone and accessories
doors. to enhance media flow. Special acces-
sories are available to protect compo-
High volume air inlets and a nents from aggressive media like ALOX.
rugged down-flow dust collector
combine to create true cross-draft
ventilation at 50 fpm to mini-
Dust
Collection
T he Clemco Down-Flow dust collector
ventilates the blast enclosure and
powers the media cleaner. Reinforced
pleated-fiber cartridges provide a 2.1-to-1
mize dust clouding inside. Bright Designed filter-to-air ratio, trapping particles as
fluorescent lighting enhances vis- for Abrasive small as 0.5 micron. The filters are auto-
ibility. Blasting matically pulsed clean with compressed
air.
Place the room on any smooth, Directing exhaust air back into your
level floor and install a ramp to building reduces heating and cooling
minimize site-prep requirements, costs. Optional HEPA filters virtually
or install in a pit to make the eliminate microscopic dust emissions.
blast room floor level with your
existing floor.
Outstanding
Distributor
T he world-wide network of Clemco
Distributors has more than 50 years
of experience planning, installing, and
maintaining industrial blast equipment.
Support Your authorized Distributor has the
trained personnel and a ready inventory
of standard parts to keep your blast room
operating at peak efficiency.
3. Transition Assembly
Rigid Ducting
Clemco Model CDF-4 Clemco Model CDF-4
Dust Collector Rigid Ducting Dust Collector
Flat-Trak® Floor with grating M-Section® Pneumatic 4000 cfm capacity
3400 cfm capacity
Abrasive Cleaner Floor with grating
Media Reclaimer
Bucket Elevator
1,200 cfm Reclaimer
Storage
Hopper
CDF-4 CDF-4
Flat-Trak® Mechanical Floor Blast Machine M-Section® Pneumatic Floor Blast Machine
Flat-Trak Pre-Assembled Blast Room
®
M-Section Pre-Assembled Blast Room
®
Recommended for most recyclable media. Recommended for fine glass bead and ALOX, or other
Includes low-profile mechanical recovery floor, lightweight media. Includes pneumatic recovery floor,
bucket elevator, and air-wash abrasive cleaner. and cyclone media reclaimer.
FORWARD PUSH
BACK STROKE Steel Vane
Mound of Media
Sub-Floor
The Flat-Trak® Recovery Floor
Typical M-Section® Pre-Assembled Blast Room The M-Section® Recovery Floor
Includes pneumatic recovery floor, cyclone media reclaimer, down-flow dust
collector, complete plan drawings, air and electrical specifications, and
installation and startup instructions. (Dust collector not shown)