Here you will see how simple our CNC plasma cutter is to use. No additional programming skills are required for you to produce in house metal profiles.

1. Using a CNC Plasma Cutter
By Wasp Supplies Ltd

2. If you own a low cost CNC plasma cutter you can
produce your own profiles in minutes.
Our software is very easy to use !

3. The first stage of producing a cut profile is to create a
CAD digital image called a DXF file.
This is generally sent electronically to a sub contractor to produce the
components on your behalf .

4. Using our easy to use software simply import the dxf
file from its saved location.

5. We give you the option to import a dxf file or just add
your own dimensions to our 80 component parametric
shape library
We can also give you the option to either cut or etch the profile .

6. Select how many components, what material and how
thick the material is
If you want to include another shape repeat the import process .

7. Our software generates a data sheet, showing the correct
consumables to use, as well as material usage, scrap, and plasma
cutting times.

8. 1 click to generate machine code called a tap file
That is the design over in minutes

9. Using the Pre Installed Mach III software load the tap file
Make sure your material is loaded on the table bed, the correct plasma
materials are installed.
Hit “ RUN “ and start cutting !

10. Stand back and watch the profile being produced

11. Remove clean and ready to use in 10 minutes
Save the job for future use

12. For more details see the complete range here