Classic Cars Nissan offers you excellent sales and service on new or used Nissan vehicles. Stop in and test drive a Nissan 2011 GT-R or any car or truck today! We're located Hainesport New Jersey between Cherry Hill and Mount Holly. Only 20 minutes from Philadelphia. Classic Cars Nissan 1513 Route 38 Hainesport, NJ 08036 866-CLASSIC or 866-252-7742
4. Black plate (5,1)
Foreword
Welcome to the growing family of new NISSAN READ FIRST — THEN DRIVE SAFELY features to all occupants of the
owners. This vehicle is delivered to you with Before driving your vehicle, please read this vehicle.
confidence. It was produced using the latest Owner’s Manual carefully. This will ensure . ALWAYS review this Owner’s Man-
techniques and strict quality control. familiarity with controls and maintenance re-
ual for important safety information.
quirements, assisting you in the safe operation
This manual was prepared to help you under-
of your vehicle.
stand the operation and maintenance of your MODIFICATION OF YOUR VEHICLE
vehicle so that you may enjoy many miles
(kilometers) of driving pleasure. Please read WARNING This vehicle should not be modified. Mod-
ification could affect its performance,
through this manual before operating your
IMPORTANT SAFETY INFORMATION safety or durability, and may even violate
vehicle.
REMINDERS FOR SAFETY! governmental regulations. See the 2011
A separate Warranty Information Booklet NISSAN GT-R Warranty Information Book-
contains the warranties covering your Follow these important driving rules to let for details including applicable exclu-
vehicle (whose terms have control over help ensure a safe and comfortable trip sions.
this Owner’s Manual or any other docu- for you and your passengers!
ment or representation regarding warranty . NEVER drive under the influence of
WHEN READING THE MANUAL
coverage). The “NISSAN Service and Main- alcohol or drugs. This manual includes information for all
tenance Guide” explains details about options available on this model. Therefore,
. ALWAYS observe posted speed lim- you may find some information that does
maintaining and servicing your vehicle.
its and never drive too fast for not apply to your vehicle.
Additionally, a separate Customer Care/ conditions.
Lemon Law Booklet (U.S. only) will explain All information, specifications and illustrations in
. ALWAYS give your full attention to
how to resolve any concerns you may have this manual are those in effect at the time of
driving and avoid using vehicle printing. NISSAN reserves the right to change
with your vehicle, as well as clarify your
rights under your state’s lemon law. features or taking other actions that specifications or design at any time without
could distract you. notice.
Your NISSAN dealership knows your vehi-
. ALWAYS use your seat belts and
cle best. When you require any service or
have any questions, they will be glad to appropriate child restraint systems.
assist you with the extensive resources Pre-teen children should be seated
available to them. in the rear seat.
. ALWAYS provide information about
the proper use of vehicle safety
Model "R35-D" EDITED: 2009/ 12/ 11
5. Black plate (6,1)
IMPORTANT INFORMATION ABOUT Arrows in an illustration that are similar to those
THIS MANUAL above call attention to an item in the illustration.
You will see various symbols in this manual. They
are used in the following ways: This indicates the title and reference page.
WARNING CALIFORNIA PROPOSITION 65
WARNING
This is used to indicate a hazard that
could cause death or serious personal WARNING
injury. To avoid or reduce the risk,
follow the information and instructions Engine Exhaust, some of its constitu-
exactly. ents, and certain vehicle components
contain or emit chemicals known to the
State of California to cause cancer and
CAUTION birth defects or other reproductive
This is used to indicate a hazard that If you see the symbol above, it means “Do not harm. In addition, certain fluids con-
could cause minor or moderate perso- do this” or “Do not let this happen”. tained in vehicles and certain products
nal injury. To avoid or reduce the risk, of component wear contain or emit
follow the information and instructions chemicals known to the State of Cali-
carefully. fornia to cause cancer and birth defects
If you see a symbol similar to those above in an or other reproductive harm.
illustration, it means the arrow points to the front
NOTICE of the vehicle. CALIFORNIA PERCHLORATE ADVI-
This is used to indicate a hazard that SORY
could cause damage to property or your Some vehicle parts, such as lithium bat-
vehicle. To avoid or reduce the risk, teries, may contain perchlorate material.
Arrows in an illustration that are similar to those The following advisory is provided: “Per-
follow the information and instructions.
above indicate movement or action. chlorate Material - special handling may
apply, See www.dtsc.ca.gov/
hazardouswaste/perchlorate.”
Model "R35-D" EDITED: 2009/ 12/ 11
6. Black plate (7,1)
* 2009 NISSAN MOTOR CO., LTD.
C
All rights reserved. No part of this Owner’s
Manual may be reproduced or stored in a
retrieval system, or transmitted in any form, or
by any means, electronic, mechanical, photo-
copying, recording or otherwise, without the
prior written permission of NISSAN Motor Co.,
Ltd.
Model "R35-D" EDITED: 2009/ 12/ 11
7. Black plate (8,1)
NISSAN CUSTOMER CARE PROGRAM
NISSAN CARES ...
Both NISSAN and your GT-R certified NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your
GT-R certified NISSAN dealer are our primary concerns. Your GT-R certified NISSAN dealer is always available to assist you with all your automobile sales
and service needs.
However, if there is something that your GT-R The Consumer Affairs Department will ask for You can write to NISSAN with the information on
certified NISSAN dealer cannot assist you with the following information: the left at:
or you would like to provide NISSAN directly For U.S. customers
with comments or questions, please contact the — Your name, address, and telephone number
NISSAN North America, Inc.
NISSAN Consumer Affairs Department using — Vehicle identification number (attached to Consumer Affairs Department
our toll-free number: the top of the instrument panel on the P.O. Box 685003
For U.S. customers driver’s side) Franklin, TN 37068-5003
1-866-668-1GTR For Canadian customers
(1-866-668-1487) — Date of purchase
NISSAN Canada Inc.
For Canadian customers — Current odometer reading 5290 Orbitor Drive
1-800-387-0122 Mississauga, Ontario L4W 4Z5
— Your NISSAN dealer’s name
— Your comments or questions
OR
We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.
Model "R35-D" EDITED: 2009/ 12/ 11
8. Black plate (1,1)
Table of GT-R Overview GTR
Contents Illustrated table of contents 0
Safety — Seats, seat belts and supplemental restraint system 1
Instruments and controls 2
Pre-driving checks and adjustments 3
Display screen, heater, air conditioner and audio systems 4
Starting and driving 5
In case of emergency 6
Appearance and care 7
Maintenance and do-it-yourself 8
Technical and consumer information 9
Index 10
Model "R35-D" Edited: 2009/ 12/ 11
11. Black plate (4,1)
GT-R SPECIAL SPECIFICATION
GT-R SPECIFIC INFORMATION PARTS
The GT-R is NISSAN’s first supercar category . Deleting any or all stored information in any
vehicle. The GT-R is equipped with special computer, control unit or electronic module NOTICE
systems. These systems are different than those including VSDR,
Only use the following required fluids
used on conventional vehicles to allow for the
. Failure to have required Performance Opti- and parts in the GT-R to avoid possible
high performance driving characteristics of this
mization Services performed. vehicle damage.
vehicle. Your vehicle should be maintained by a
GT-R certified NISSAN dealer. Special skills, In addition, see your Dunlop/Goodyear and
knowledge and equipment are necessary to Bridgestone tire warranties for specific limita-
ENGINE OIL
properly maintain your GT-R. tions or exclusions for operating summer tires Mobil 1 (0W-40) (100% synthetic oil)
below −208C (−48F).
WARRANTY INFORMATION Mobil 1 (0W-40) (100% synthetic) is the factory
MAINTENANCE INFORMATION fill oil. The VR38 engine with its plasma-sprayed
Please read this Owner’s Manual carefully,
bores was developed using this oil. NISSAN
together with your Warranty Information Booklet . Special skills, knowledge and equipment are cannot ensure proper engine operation and
which describes a number of express limitations, necessary to properly inspect and adjust the durability if other 0W-40 synthetic oil is used.
exclusions and ways to void your warranty for GT-R engine, transmission, suspension and If Mobil 1 (0W-40) is not available, Mobil 1
failing to follow the instructions contained in this brakes to maintain performance. A GT-R (10W-40) (100% synthetic) may be used;
Owner’s Manual, including, but not limited to: certified NISSAN dealer has the GT-R however, some performance loss may be
. Failure to use proper parts, fuel and fluids, certified technical staff and the special noticed.
equipment to properly maintain your GT-R.
. Driving with the VDC off, The use of additives, chemical materials or
. NISSAN recommends maintenance items abrasive compounds is prohibited.
. Racing, that require the replacement of parts, engine
oil, oil filters and air filters should be The use of additives, chemical materials, abra-
. Any competitive driving of any sort whatso- performed by a GT-R certified dealer. Make sive compounds or other high performance
ever, sure the specified fluids and parts are used engine oils may cause internal engine damage.
. Use on a track or driving on any airstrip, when the maintenance is performed.
TRANSMISSION OIL
NISSAN also recommends the replacement
. Modifications, including adding/replacing, of parts such as brakes should be performed Genuine NISSAN Transmission Oil R35
reprogramming, attempting to reprogram, by a GT-R certified NISSAN dealer. Special (100% synthetic oil)
altering, disconnecting any computer, con-
trol unit or electronic modules, The GT-R uses a multiple-disc dual wet clutch
transmission. The specially developed transmis-
sion oil maximizes the friction characteristics of
GTR-2 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
12. Black plate (5,1)
the clutch and the lubrication of the gear specially designed for this brake fluid. NISSAN — the tire coming loose from the wheel during
bearings. cannot ensure the best performance and proper a flat tire
operation of the vehicle if other brake fluid is
The use of additives is prohibited. used. — reduced wheel lug nut tightness
The use of additives or other transmission oil TIRES AND ROAD WHEELS SUSPENSION
may cause internal transmission or clutch Genuine GT-R special suspension
damage. Genuine GT-R tires and road wheels
Use only genuine GT-R tires and road wheels. Use only genuine GT-R special suspension
DIFFERENTIAL OIL (front and rear) components.
Castrol SAF-XJ 75W-140 (100% synthetic Tires
oil) Using non-genuine GT-R suspension compo-
The GT-R uses specially designed run-flat tires nents can affect vehicle performance and may
The GT-R uses a 1.5-Way mechanical Limited and matching road wheels. Use of these cause body damage when driving depending on
Slip Differential (LSD) to maximize driving power specially developed tires and wheels provides the road conditions.
under many operating conditions. Use the the greatest potential for maximum performance.
specified differential oil to maximize the perfor- BRAKE PAD AND DISC ROTOR
— Using non-genuine GT-R tires may cause
mance of the LSD. Also use the same oil for the powertrain system damage if the vehicle is Genuine GT-R brake pads and disc rotors
front differential. driven in a flat tire situation, even if run flat Use only genuine GT-R brake pads and disc
The use of additives is prohibited. tires are used. rotors.
Using additives or any other than the specified — Using non-genuine GT-R tires may also This vehicle is equipped with cross-drilled
differential oil may cause the oil temperature to cause tire failure due to excessive heat floating rotors and radial-mounted six-piston
increase and the final drive damaged. Also it may buildup caused by tire distortion while monoblock calipers. This helps to achieve
cause vibration and adversely the vehicle hand- driving. excellent stopping performance and fade-resis-
ling characteristics. — Using non-genuine GT-R tires may affect the tance. Replace all four sets of brake pads and
operation of the VDC system. disc rotors at the same time to maintain
BRAKE FLUID maximum brake performance.
Genuine NISSAN Brake Fluid R35 Special Road wheels
II Using non-genuine GT-R Brake pads or rotors
Using non-genuine GT-R wheels may cause the
can affect vehicle braking performance and the
following:
Genuine NISSAN Brake Fluid R35 Special II is operation of the ABS and VDC system.
the factory fill brake fluid. The Vehicle Dynamic — vehicle vibration
Control (VDC) unit and other related parts were
GT-R Overview GTR-3
Model "R35-D" EDITED: 2009/ 12/ 11
13. Black plate (6,1)
EXHAUST MUFFLER AND TRUNK Additions of non-genuine GT-R specific acces- performance which can increase the
CARPET sory exterior parts can change the air flow over temperature in the engine compart-
Genuine GT-R special exhaust muffler and and around the body. This can affect vehicle ment. This can affect the operation or
trunk carpet. balance and cooling of various systems. damage parts located in the engine
Use only the genuine GT-R special exhaust For example, if the front bumper is modified, compartment.
muffler and trunk carpet. there is a possibility that brake cooling perfor-
mance may be reduced due to the decrease of
The GT-R exhaust system is designed to provide the air flow to the brake system.
the maximum vehicle performance and to
protect the vehicle from high exhaust gas Use only GT-R special specification parts.
temperatures. Front bumper
If non-genuine GT-R specification parts are The shape of the bumper helps pull air into the
used it is possible that the muffler or other engine compartment through the front wheel
exhaust system parts will deform and cause housing to cool the radiator and brakes. Instal-
damage to the underbody. Non-genuine GT-R ling an aftermarket bumper may affect the air
specification parts can also affect vehicle flow in the engine compartment and decrease
performance and possibly lead to turbocharger the brake and engine cooling performance. An
or engine damage. aftermarket bumper may also change vehicle
balance by reducing front down force.
Also, do not remove the trunk carpet from the
vehicle for any reason. The carpet insulates the Rear wing
vehicle interior from the heat of the muffler and Installing an aftermarket rear wing may change
from the noise of the transmission. the down force balance between front and rear
EXTERIOR PARTS (spoiler, etc.) of the vehicle. This can affect the handling
characteristics of the vehicle and affect the
Do not modify exterior parts. operation of the ABS and VDC systems.
The GT-R was developed using a special wind
tunnel to help make sure the vehicle is NOTICE
aerodynamically balanced. Additionally, the wind Modifications to exterior parts may
tunnel was used to help make sure cool air flows
affect engine and transmission cooling
to the brakes, radiator and other components.
GTR-4 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
14. Black plate (7,1)
GT-R PERFORMANCE
OPTIMIZATION SERVICES
In addition to the regular maintenance recom- . Repairs and adjustments involving ENGINE SETTINGS (balancing right
mended by NISSAN, the GT-R requires the parts replacement, etc. determined to and left air flow)
following special inspections: be necessary as a result of these Each cylinder bank of this engine operates
inspections are performed at the cus- independently due to the vehicle’s twin turbo-
. Wheel alignment inspection and adjustment tomer’s expense.
(if necessary) (including tire pressure ad- charger design. Each side of the engine must
justment) . See the 2011 NISSAN GT-R Warranty operate at the same level of performance. The air
Information Booklet for significant lim- flow of each bank must be checked and
. Engine settings (balancing right and left air itations, exclusions and possible void- adjusted as necessary by a GT-R certified
flow) NISSAN dealer.
ing of your warranty resulting from
. Transmission settings failure to have these necessary inspec- TRANSMISSION SETTINGS
tions, repairs and/or adjustments per-
These inspections are required at the following The design of the clutch and transmission
intervals: formed. requires inspection and adjustment of the clutch
. See the 2011 NISSAN GT-R Service and and shift forks by a GT-R certified NISSAN
. 1,000 miles Maintenance Guide for a detailed ex- dealer at the recommended intervals. Depend-
. 12 months planation of the GT-R Performance ing on the driving conditions, more frequent
Optimization Services. adjustments may be necessary to help maximize
. 24 months vehicle performance.
. 36 months WHEEL ALIGNMENT INSPECTION
NOTE: AND ADJUSTMENT (if necessary)
. These inspections will be performed (including tire pressure adjustment)
free of charge for labor at a GT-R This vehicle is equipped with a high perfor-
certified NISSAN dealer only. Inspec- mance suspension. The vehicle’s wheel align-
tions thereafter are recommended ment needs to be measured and adjusted (if
every 12 months or 12,000 miles necessary) by a GT-R certified NISSAN dealer
(whichever comes first) at the custo- as necessary as the vehicle is driven and the
suspension parts break-in.
mer’s expense. See the 2011 NISSAN
GT-R Warranty Information Booklet for
details.
GT-R Overview GTR-5
Model "R35-D" EDITED: 2009/ 12/ 11
15. Black plate (8,1)
BREAK-IN SCHEDULE PRECAUTIONS BEFORE DRIVING
. Drive with the suspension setup switch in VEHICLE DYNAMIC CONTROL (VDC)
NOTICE the COMF mode to allow more suspension OFF MODE
stroke.
Follow these recommendations to ob- Always make sure the VDC is ON before driving
tain maximum engine performance and 600 to 1,200 miles (1,000 to 2,000 km) the vehicle by checking that the VDC OFF
ensure the future reliability and econo- indicator lights on the meter and the VDC set-up
. Drive with the engine speed kept relatively switch are not illuminated. The GT-R is a high
my of your new vehicle. Failure to high. Shifting is recommended between 1st
follow these recommendations may performance vehicle and the VDC must be on/
and 4th gears. activated to provide proper powertrain operation
result in shortened engine life and
reduced engine performance. . Avoid unnecessary quick steering and and intended drivability.
abrupt braking.
Please observe the following types of driving . Drive with the suspension setup switch in
WARNING
until the mileage shown below has been the COMF mode to allow more suspension . The VDC OFF mode should ONLY be
reached. stroke. used briefly to help free the vehicle
Until 300 miles (500 km): Even though the mileage reaches over 1,200 if stuck in snow or mud by tempora-
rily stopping operation of the VDC
. Do not depress the accelerator pedal more miles (2,000 km), the clutch may take longer to
than halfway and avoid rapid acceleration. properly engage if the vehicle is mainly driven in to maintain wheel torque.
town at a low speed. NISSAN recommends . Driving the GT-R with the VDC off
. Drive with the engine speed kept at less breaking in the clutch at a GT-R certified may lead to handling issues related
than 3,500 RPM. NISSAN dealer. to steering maneuvers, acceleration,
. Avoid unnecessary quick steering, abrupt WHEEL ALIGNMENT or deceleration. Moreover, driving
braking and driving on poor roads. with the VDC off can result in an
Do not adjust the wheel alignment until the
300 to 600 miles (500 to 1,000 km) mileage reaches 1,000 miles (1,600 km). Until inoperative vehicle by causing ser-
then, the suspension may not engage enough ious damage to the powertrain,
. Avoid rapid acceleration in a low gear (1st to and the height may be higher. including damage to the Transaxle
3rd gears) with the accelerator pedal fully Assembly including Transfer, Clutch,
depressed. Depress the pedal slowly. However, make sure to adjust the alignment Gears, Transaxle case and all of its
after 1,000 miles (1,600 km).
. Avoid unnecessary quick steering and components and other drivetrain
abrupt braking. component(s) by overheating or ex-
cessive force.
GTR-6 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
16. Black plate (9,1)
FUEL
. Damage to the powertrain or any NISSAN recommends using fuels that contain
drivetrain component(s) that occurs
WARNING no alcohol. However, fuels containing up to 10%
when there is a record in the Vehicle Never use summer tires when the alcohol may be used, if necessary. Do not use E-
Status Data Recorder (VSDR) that temperature is below −48F (−208C) to 85 in your vehicle. ( “FUEL RECOMMEN-
the vehicle was driven with VDC off prevent permanent tread deformation DATION” page 9-3).
during the period when the damage which may cause tire damage or tire
was incurred is excluded from war- failure. This may cause a loss of vehicle NOTICE
ranty coverage. control which can result in serious To avoid serious engine damage due to
personal injury or death. increased cylinder temperatures, do not
See your 2011 Warranty Information Booklet for use fuels that contain more alcohol
important related information and warranty ALL-SEASON TIRES than indicated in “Gasoline containing
coverage exclusions. See also section 2 (page Do not exceed the speed rating of the tire that is oxygenates” in the “9. Technical and
2-28) and section 5 (page 5-42) of this Owner’s installed on the vehicle. consumer information section. Also, do
Manual, “Transmission Clutch Temperature
High” and “Vehicle Dynamic Control (VDC) not use fuel additives, fuel stabilizers or
System” for important additional related informa- fuel deicers that contain alcohol.
tion.
SUMMER TIRES
The GT-R summer tires are made from a
specially formulated rubber to maximize the
vehicle’s performance capabilities. Performance
of summer tires is substantially reduced when
temperatures are less than 328F (08C) so you
must drive carefully. NISSAN recommends the
use of winter or all-season tires on all four
wheels if you plan to operate your vehicle in
snowy or icy conditions when temperatures are
less than 328F (08C).
GT-R Overview GTR-7
Model "R35-D" EDITED: 2009/ 12/ 11
17. Black plate (10,1)
BODY REPAIR ADDITIONAL MAINTENANCE ITEMS
The body of the GT-R has been manufactured The information and specifications in this FLUIDS
on special fixtures utilizing a hybrid structure section apply only when engaging in The information and specifications in this
with aluminum die cast parts for the frame work. performance driving. section apply only when engaging in
Special skills, information and equipment are performance driving.
required to correctly repair the body. Contact a The following information applies only if you
GT-R certified NISSAN dealer if the vehicle is engage in performance driving such as driving . Before driving, check the fluid levels and
damaged, such as in a collision, and they will your GT-R for extended periods under the adjust as necessary using the specified fluid
recommend an appropriate body shop. following conditions. as described under the conditions listed in
ADDITIONAL MAINTENANCE ITEMS. If you
Only certified body shops using CELETTE® . Higher-RPM (approaching redline) opera-
do not drive under the conditions listed, refer
advanced collision repair equipment are ap- tion
to the 2011 Service Maintenance Guide.
proved by NISSAN for repairing structural body . Frequent high pedal force braking from
damage. Contact a GT-R certified NISSAN moderate and higher speeds
dealer or NISSAN Consumer Affairs for a
referral or list of certified body shops. . Frequent throttle activation
. Fast revving throughout the RPM range
In such cases, the following additional main-
tenance guidelines apply.
However, you should also carefully read
your 2011 NISSAN GT-R Warranty Informa-
tion Booklet for important information
concerning warranty coverage, limitations
and exclusions.
We recommend that maintenance be performed
at a GT-R certified NISSAN dealer. NISSAN will
only pay for GT-R Performance Optimization
Services performed at a GT-R certified NISSAN
dealer.
GTR-8 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
18. Black plate (11,1)
. Be sure to change the fluids with the
specified fluids after driving.
( “RECOMMENDED FLUIDS AND
MAINTENANCE INTERVAL” page GTR-10).
. Fluid temperature can be checked on the
multi function display.
— Engine Coolant Temperature
— Engine Oil Temperature
— Transmission Oil Temperature
See the separate Multi Function Display Own-
er’s Manual.
. NISSAN recommends to adjust the engine . Adjust the power steering fluid level to the R
oil level * to be 0.39 in (10 mm) *
1 2 mark * on the power steering dipstick
5
below the H mark on the engine oil dipstick. when the fluid temperature is hot or * 6
(* range is 1.18 in (30 mm)) Before
3 when the fluid temperature is cold.
checking the oil level, run the engine until it
reaches operating temperature and wait at Fluid temperature:
least 5 minutes after turning off the engine. Hot: 122 to 1768F (50 to 808C): between
Make sure the oil level always remains above * and *
1 5
the L mark.
Cold: 32 to 868F (0 to 308C): between *
3
and *6
GT-R Overview GTR-9
Model "R35-D" EDITED: 2009/ 12/ 11
19. Black plate (12,1)
RECOMMENDED FLUIDS AND
MAINTENANCE INTERVAL
The information and specifications in this section apply only when engaging in
performance driving.
ITEMS Engine Oil
GT-R SPECI-
Mobil 1 (0W-40)*1
FIED FLUIDS
Change engine oil and engine oil filter at the same
. When the oil temperature stays
interval as Schedule 1 and 2 in the 2011 NISSAN
below 2308F (1108C) while driving
GT-R Service and Maintenance Guide section.
MAINTENANCE . When the oil temperature reaches
Change engine oil and engine oil filter every 3,000
INTERVAL between 2308F (1108C) and 2668F
miles (5,000 km).
(1308C) while driving
. When the oil temperature exceeds Change engine oil and engine oil filter immediately
2668F (1308C) while driving after stopping.
ITEMS Transmission Oil
GT-R SPECI-
Genuine NISSAN Transmission Oil R35 Special
FIED FLUIDS
Change transmission oil at the same interval as
. When the oil temperature stays
Schedule 1 and 2 in the 2011 NISSAN GT-R
below 2488F (1208C) while driving
Service and Maintenance Guide section.
. When the oil temperature reaches
MAINTENANCE Change transmission oil every 3,000 miles (5,000
between 2488F (1208C) and 2848F
INTERVAL km).
(1408C) while driving
Change both transmission oil and differential oil
. When the oil temperature exceeds
immediately after stopping. Differential oil tempera-
2848F (1408C) while driving
ture usually increases concurrently.
GTR-10 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
20. Black plate (13,1)
The information and specifications in this section apply only when engaging in INSPECTION AND ADJUSTMENTS
performance driving. OF TIRES, SUSPENSION, CLUTCH
AND BRAKES
ITEMS Differential Oil (front and rear)*2
The information and specifications in this
GT-R SPECIFIED FLUIDS Castrol SAF-XJ 75W-140
section apply only when engaging in
MAINTENANCE INTERVAL Change differential oil every 3,000 miles (5,000 km). performance driving.
. Measure and adjust the wheel alignment.
ITEMS Brake Fluid
. Check tire wear and cracking.
GT-R SPECIFIED FLUIDS Genuine NISSAN Brake Fluid R35 Special II*3
MAINTENANCE INTERVAL Change brake fluid every 3,000 miles (5,000 km). . Check the tire pressure and adjust the
pressure as necessary when the tires are
*1: Mobil 1 (0W-40) (100% synthetic) is the factory fill oil. The VR38 engine with its plasma-sprayed bores was cold. ( “Tire pressure” page GTR-13)
developed using this oil. NISSAN cannot ensure proper engine operation and durability if other 0W-40
synthetic oil is used. If Mobil 1 (0W-40) is not available, Mobil 1 (10W-40) (100% synthetic) may be used;
however, some performance loss may be noticed.
*2: The differential oil temperature cannot be displayed on the multi function display.
*3: Genuine NISSAN Brake Fluid R35 Special II is the factory fill brake fluid. The Vehicle Dynamic Control (VDC)
unit and other related parts were specially designed for this brake fluid and NISSAN cannot ensure the best
performance and proper operation of the vehicle if other brake fluid is used.
GT-R Overview GTR-11
Model "R35-D" EDITED: 2009/ 12/ 11
21. Black plate (14,1)
ABS and VDC systems. Low Tire pres-
sure may also cause tire failure and
result in serious personal injury or
death.
. Make sure the tire valve stem cap is installed
and that the valve stem is tight.
. Make sure the wheel nuts are tight.
( “WHEELS AND TIRES” page 8-28)
. Make sure the drive shaft nuts are tight.
. Check wheel hub run out and that the wheel
rotates smoothly without any friction. Check
these with the tires removed whenever an
inspection is performed with the vehicle
*The chart above indicates an example of the jacked up. . Make sure the tire has not slipped on the
change in tire pressure (air) when measured and wheel causing the assembly to be out of
adjusted with tire pressure at 778F (258C), . Secure road wheel balance weights with balance. The reference marks on the tire and
according to the change in outside air tempera- aluminum tape or equivalent. wheel should be aligned. If the reference
ture of the modified tire inner pressure. marks are not aligned, the tire has slipped on
. Check that the wheel nuts are not stripped.
the wheel. Have the wheels/tires reba-
The tire pressure changes depending on the lanced. Make sure the old reference marks
outside temperature or altitude. Check the tire are erased and new reference marks are
pressure regularly and when the climate condi- applied to the wheel and tire. When instal-
tions change. ling new tires on the wheels, make sure new
reference marks are applied to the wheels
WARNING and tires.
Keep your tires inflated to the correct . Check for the heat deterioration of the
tire pressure. Driving with low tire brakes and parts around the brakes.
pressure can damage some powertrain
. NISSAN recommends that the brakes
systems and affect the operation of the
GTR-12 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
22. Black plate (15,1)
should be bled before engaging in perfor- RECOMMENDED ADJUSTMENTS FOR MAXIMUM PERFORMANCE
mance driving and when replacing the brake The information and specifications in this section apply only when engaging in
fluid. It is recommended that bleeding the performance driving.
brake be performed when the brake calipers
are hot (about 2128F (1008C)). Tire pressure
. Check the engine, transmission, differential Condition Pressure PSI (kPa)
and under the vehicle for oil and coolant Starting to drive (Tires are cold) All: 29.0 (200)
leaks. Increasing tire pressure (Tires are hot) Front: 39.2 (270), Rear: Not exceeding 37.7 (260)
. Before engaging in performance driving, the
clutch clearance may need to be adjusted.
See your GT-R certified NISSAN dealer for
information.
NOTICE
Failure to have the clutch properly
adjusted before performance driving
may cause the transmission oil tem-
perature to increase which may cause
transmission damage.
. Check the steering and suspension system
and other links for loose and/or damaged
parts before and after driving.
GT-R Overview GTR-13
Model "R35-D" EDITED: 2009/ 12/ 11
23. Black plate (16,1)
REPLENISHING COOLANT 50% antifreeze and 50% demineralized or
distilled water mix is used. NOTICE
The information and specifications in this
section apply only when engaging in At the completion of performance driv-
COOL DOWN
performance driving. ing, all fluid and other adjustments
The information and specifications in this should be returned to the normal fluid
Check the coolant level in the pressurized section apply only when engaging in specifications as shown in the “Main-
coolant reservoir. Adjust the level so that the performance driving.
fluid is between the MAX and MIN markings. For tenance and do-it-yourself” section of
the coolant, use genuine NISSAN Long Life Cool down the vehicle to help extend the life of this manual.
coolant. (On delivery of new vehicle, the the vehicle if coolant temperatures are extremely
reservoir is filled to the MIN level. Be sure to high. Drive the vehicle at 37 to 50 MPH (60 to
replenish approximately 0.3 to 0.4 US quart (0.3 80 km/h), in 5th or 6th gear for 2 to 3 miles (3 to
to 0.4 liter) of coolant.) 5 km) and then stop the engine.
BRAKE PAD
NOTICE
The information and specifications in this
Do not overfill the coolant. This may section apply only when engaging in
increase the pressure in the cooling performance driving.
system and cause coolant leaks.
NISSAN recommends adding an additional
cross spring to the front calipers before enga-
COOLANT MIXTURE RATIO ging in performance driving. The additional
The information and specifications in this spring reduces brake pad movement resulting
section apply only when engaging in from cornering forces and will reduce the stroke
performance driving. of the brake pedal. Contact a GT-R certified
NISSAN dealer to purchase the spring and
To maximize vehicle performance, the coolant
arrange installation.
mixture ratio should be a combination of 30%
antifreeze and 70% demineralized or distilled Break-in procedure
water for maximum cooling system performance NISSAN recommends that a special brake pad
regardless of ambient temperatures. break in procedure be performed before enga-
If ambient temperatures are anticipated below ging in performance driving. Contact a GT-R
58F (−158C), make sure a proper mixture ratio of certified NISSAN dealer for details.
GTR-14 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
24. Black plate (17,1)
GT-R SPECIFIC VEHICLE
CHARACTERISTICS
REFUELING PRECAUTIONS GASOLINE SMELL ENGINE SPEED IS RESTRICTED
The fuel temperature is higher when the vehicle To help protect the engine, the maximum engine
WARNING is hot. This may cause a gasoline smell from the speed is automatically controlled in the following
vehicle. This does not indicate that there is a conditions:
Do not attempt to top off the fuel tank malfunction. The smell will go away when the
after the fuel pump nozzle shuts off fuel temperature has cooled. . Revving the engine with the shift lever in the
automatically. Continued refueling may & or & position: The maximum engine
P N
OUTSIDE TEMPERATURE DISPLAY speed is 5,000 RPM
cause fuel overflow, resulting in fuel
INDICATES HIGHER TEMPERATURE
spray and possibly a fire. The fuel tank . Revving the engine when the engine oil is at
is full at the first automatic shutoff. Heat from the engine compartment, radiator and a low (below 378F (08C)) or extremely high
intercoolers can affect the outside temperature (over 2758F (1358C)) temperature: The
To maximize vehicle performance, the fuel tank is display. The outside temperature display may maximum engine speed is 4,000 RPM (The
located as low as possible to lower the vehicle indicate a higher than actual temperature while
driving or stopped. This is normal. & position will automatically change to the
M
center of gravity. The tank is also divided into
two parts. This fuel tank design causes higher & position.)
A
pressures inside the tank than other vehicles so
IDLE SPEED IS NOT STEADY
BOOST PRESSURE IS RESTRICTED
fuel spillage is possible by trying to top off the The idle speed may not be steady when the
fuel tank after automatic shutoff. engine compartment is extremely hot. This is To help protect the engine, the boost pressure is
normal. The engine speed will be steady when automatically controlled not to increase when
The fuel tank pressure is higher when the vehicle the engine cools down. the engine coolant is at a low or extremely high
is hot, especially if the tank is more than half full. temperature.
If the cap is opened when the vehicle is hot, it In this case, the Malfunction Indicator Light (MIL)
may cause fuel spray and there may be a hissing may come on. After a few driving trips, the MIL DISTORTION OF REAR WING
noise. Open the cap slowly, releasing the should turn off. If the light remains on after a few When the vehicle is parked in direct sunlight on
pressure from the tank gradually. Also, if the driving trips, have the vehicle inspected by a a hot day, the center of the rear wing may
vehicle is refueled when the vehicle is hot, the GT-R certified NISSAN dealer. become distorted. This is normal. When the
fuel pump may automatically shut off before the surface temperature of the rear wing is reduced,
tank is full. This does not indicate that there is a the shape of the wing should return to normal.
malfunction. Refuel slowly or refuel after the
vehicle has cooled.
GT-R Overview GTR-15
Model "R35-D" EDITED: 2009/ 12/ 11
25. Black plate (18,1)
UNEVEN WEAR OF TIRES caused when the brake pads absorb moist- . The GT-R uses brake pad materials that
The GT-R is equipped with high performance, ure, and the noise stops after the brake is have high metallic content. The brake pad
low profile, run-flat tires that are optimized for applied several times. material helps maintain braking performance
performance and handling. The life of these tires in a wide range of weather and driving
. A screeching noise may also be heard when conditions.
will be less than those of tires installed on a the brake pedal is depressed:
typical vehicle, and you are likely to experience For the first 3,000 miles (5,000 km) of the
uneven tire wear and tire noise regardless of the — When repeatedly applying gentle brak- vehicle’s service life, and for the first 3,000
type of tire used. ing, especially on a curve at a low miles (5,000 km) after a brake replacement,
speed, or the brake pad to brake rotor clearance is
NOISES ARE HEARD WHILE DRIV-
ING — When the brake rotors have circular very small. When parking, apply the parking
scores with the brake temperature high. brake and move the shift lever to the & P
. The GT-R brake pads use material that position. Idle the engine for more than 20
provides a high amount of braking power WARNING seconds without depressing the brake
even in high temperatures. This material can pedal. This allows the brake pads to move
cause an intermittent screeching noise just Follow the instructions below when away from the rotor so the pad does not
before the vehicle comes to a stop when the parking the vehicle to help prevent the contact the rotor.
brakes are gently applied. The noise de- brake rotor and brake pads from rust-
creases as the brake pads wear. However, ing together. Failure to follow the Additionally, the brakes must be dry before
the additional brake pad break-in may parking the vehicle after driving on wet roads
instructions could cause the rotor and
decrease the noise. Contact a GT-R certi- or after washing the vehicle. If the roads are
pads to rust together. If the rotor and wet, lightly apply the brakes for a short
fied NISSAN dealer.
pads rust together, there may be a distance before parking the vehicle to dry
. A screeching noise may be heard when the popping noise and some vibration the brakes. After washing the vehicle, dry the
brake pedal is depressed: when the vehicle is driven, a wheel brakes by driving on a dry road for a few
— When driving the vehicle for the first time may not roll correctly, or the brake pads miles and apply the brakes normally based
in the morning, could be damaged. If the pads are on traffic and road conditions.
damaged, this may reduce the effec-
— After leaving the vehicle parked for The metallic brake pads and brake disc rotor
extended periods of time, or tiveness of the brake system which may rust together when the brakes are not
could cause a collision, serious perso- applied:
— When the vehicle is damp following rain
nal injury or death.
showers or washing the vehicle. — If the vehicle is not idled for 20 seconds
These sounds are normal. The noise is without the brakes applied, or if the
GTR-16 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
26. Black plate (19,1)
brakes are applied when the vehicle is light rattling sound may be heard from the strongly than conventional brake pads to with-
shut off, the rotor and pads can rust brake pad. This does not indicate that there stand the high brake temperatures. The friction
together, even when the brake pads are is a malfunction. material and backing plate expand due to heat at
dry. different rates. Some cracks may be on the
. When the brake disc rotor undergoes surface of the friction material due to the
— If the brakes are wet when the vehicle is thermal expansion, a ticking noise may be
parked and the parking brake is applied differences in expansion rates and the strong
heard from the engaging portion of the bond between the friction material and backing
for a long time. wheel and the brake disc rotor. This does plate. The cracks do not indicate the brake pads
— The hill start assist system can apply the not indicate that there is a malfunction. The need to be replaced.
brakes even if the brake pedal is not noise will reduce when the temperature
depressed. The brake pads and rotors decreases. BRAKE DUST
can rust together if the parking proce-
dure previously described is not fol- . In addition to noise resulting from uneven This vehicle is equipped with high performance
tire wear discussed in the previous section, brakes, and the characteristics of the brake pad
lowed.
the GT-R tires are more rigid than a typical material may cause more brake dust than other
Contact a GT-R certified NISSAN dealer if passenger car tire and are made from a vehicles. NISSAN recommends a wheel coating
the brake pads and brake rotor have rusted specially formulated rubber to maximize the that helps prevent the brake dust from sticking
together. vehicle’s performance capabilities. These to the wheels. Contact a GT-R certified NISSAN
characteristics cause the GT-R tires to have dealer for more details.
NOTICE more road noise than a typical passenger
car tire. This road noise is normal.
MECHANICAL LIMITED SLIP DIF-
Have the brake pads and/or rotors FERENTIAL (LSD) CHARACTERIS-
quenched when the brake pads are . Due to the performance capabilities and TICS
replaced to reduce the possibility of requirements of the GT-R, the sequential 6- The differential oil has a high viscosity and is
the rotors and brake pads rusting. For speed dual clutch transmission is unlike a very thick when cold. If the vehicle accelerates
detailed information about quenching, typical automatic transmission. You will likely from a stop with the steering wheel turned in
contact a GT-R certified NISSAN dealer. hear mechanical sounds from the transmis- cold temperatures, the inner wheel tire may slip
sion, particularly at slow speeds and at idle. and some noise or vibration may be heard. This
. To maintain steady braking performance in This condition is normal. phenomenon is unique to vehicles equipped
both extremely high and low temperatures, with the Limited Slip Differential (LSD). When
the gap between the brake pad and caliper CRACKS ON BRAKE PAD
the steering wheel is returned to the straight-
is larger than normal and large-size brake The friction material of the GT-R disc brake pad ahead position or the differential oil warms up,
pads are used. When driving over a bump, a is bonded to the pad backing plate more the noise and vibration decrease.
GT-R Overview GTR-17
Model "R35-D" EDITED: 2009/ 12/ 11
27. Black plate (20,1)
DUAL CLUTCH TRANSMISSION
The GT-R dual clutch transmission is a newly- passenger car transmissions. Because of this,
developed system that uses an electronically the GT-R has different operating characteristics,
controlled multiple-disc wet clutch attached to and various rattle noises may be heard during
the highly efficient manual transmission. This some driving conditions because of the follow-
transmission has two driving modes. ing items:
. & position (Automatic gearshift):
A . Gear clearances
allows automatic shifting of the manual
. Ultralight flywheel
transmission.
. Dry sump lubrication
. & position (Manual gearshift):
M
allows quick shifting of the manual transmis- These noises do not indicate that there is a
sion. malfunction.
NOTE:
. & position driving is recommended
M
when driving up hills or accelerating
from a stop on a cold morning.
. & position driving is recommended if
M
you feel shift shocks or jerkiness in the
& position in cold temperatures.
A
. When starting or driving on a steep
uphill grade, shift to the & position
M
and operate the paddle shifter to shift
down to 1st gear similar to a manual
transmission vehicle.
The GT-R dual clutch transmission was devel-
oped specifically to maximize vehicle perfor-
mance and driving enjoyment. The GT-R
transmission components were designed using
different engineering standards than typical
GTR-18 GT-R Overview
Model "R35-D" EDITED: 2009/ 12/ 11
28. Black plate (21,1)
TRANSMISSION OPERATION CHARACTERISTICS
Mechanism Operation characteristics
. The GT-R transmission design is different from transmissions used in conventional passenger cars. The GT-R uses a transmission gear
design, light flywheel and a dry sump lubrication system to provide maximum vehicle performance. Because the GT-R Transmission design
Base Manual transmission
is different, noises may be louder. When the transmission temperature is high, rattling, shaking and jarring noises may be heard.
. Clattering noises may be heard while shifting.
. When stopping the vehicle with the shift lever in the & or &↔& position, be sure to firmly depress the brake pedal. The vehicle may
R A M
slowly move if the brake pedal is not depressed.
. Avoid depressing the brake and accelerator pedals at the same time. Depressing the brake and accelerator pedals at the same time could
Multiple disc wet clutch
cause the clutch to overheat and accelerate deterioration. Also, the engine may stall.
. When the vehicle is stopped on a hill, do not hold the vehicle in place by depressing the accelerator pedal. Doing so may cause the clutch
to overheat and result in transmission damage. Use the brakes to prevent the vehicle from moving.
The following conditions are caused due to changes in fluid viscosity as a result of temperature changes.
. When the transmission fluid is extremely cold or extremely hot, the transmission may feel like it is slipping during shifts or there may be hard
Electronic oil pressure shifts. This is normal. Transmission shifting should return to normal when the transmission fluid returns to normal operating temperatures.
control . When the transmission fluid temperature is extremely cold, the time required to run a system check may increase. During the system check,
the shift lever must stay in the & position. Move the shift lever after turning off the system check display. Also, it is normal to hear clicking
P
noises during the transmission systems check.
. The higher shift speeds in the & position may result in shift shock and jerkiness when starting or shifting.
M
Changing modes . Quick shifting in the R mode with the transmission in the & position is available when the engine speed is high. However, the transmission
M
may shift more slowly when the engine speed is low.
Appropriate gaps are provided between gears to achieve smooth gear rotation and steady tooth surface lubrication under the high-load driving
Gear clearances
condition. However, this causes a rattling noise.
. An ultralight flywheel is provided to achieve rapid engine response to the accelerator pedal operation. The engine rotation fluctuations
Ultralight flywheel become larger than conventional vehicles. Rattling, shaking or jarring noises may be heard when idling or driving at a low speed.
. Rattling noises may be heard when the engine is started or stopped.
High-efficiency dry sump lubrication is provided to achieve low agitation resistance of lubricant oil and allows smooth transmission gear rotation
Dry sump lubrication that contribute to obtain a perfect balance between outstanding driving performance and improved environmental performance. However, you
may notice some rattling noise due to engine rotation fluctuations.
GT-R Overview GTR-19
Model "R35-D" EDITED: 2009/ 12/ 11
31. Black plate (24,1)
SEATS, SEAT BELTS AND
SUPPLEMENTAL RESTRAINT
SYSTEM (SRS)
FRONT 5. Seat belt pretensioner (P.1-42)
6. Front seat-mounted side-impact supplemental air
1. Seat belt (Page 1-6) bag system (P.1-31)
2. Rear seat walk-in lever (P.1-5)
7. Occupant classification sensor (pattern sensor)
3. Roof-mounted curtain side-impact supplemental (P.1-36)
air bag system (P.1-31)
8. Front seats (P.1-3)
4. Supplemental front-impact air bags (P.1-31)
0-2 Illustrated table of contents
Model "R35-D" EDITED: 2009/ 12/ 11
32. Black plate (25,1)
REAR
1. Rear seats
— Child restraint installation (P.1-14)
2. Child restraint anchor points (for top tether strap
child restraint) (P.1-14)
3. LATCH (Lower Anchors and Tethers for CHildren)
system (P.1-16)
Illustrated table of contents 0-3
Model "R35-D" EDITED: 2009/ 12/ 11
33. Black plate (26,1)
EXTERIOR
ITEMS GT-R SPECIFIED PARTS
Genuine road wheel specific to
Road wheel
GT-R
Tire*1 Genuine tire specific to GT-R
Genuine brake pad specific to
Brake pad*2
GT-R
Genuine brake disc rotor spe-
Brake disc rotor*2
cific to GT-R
*1: When tire replacement is required, replacing tires
as a set of four with new tires is recommended.
However, if a tire is punctured or damaged, it may
be possible to replace only the damaged tire.
Determining whether one tire or a complete set of
tires should be replaced is based on a number of
factors including tire wear and condition. Contact
your GT-R certified NISSAN dealer. They can
recommend if an individual tire or a complete set
should be replaced.
*2: The brake pad and the brake disc rotor must be
replaced as a set of four with new ones.
Genuine NISSAN Brake Fluid R35 Special II is the
factory fill brake fluid. The Vehicle Dynamic Control
(VDC) unit and other related parts were specially
designed for this brake fluid. NISSAN cannot
6. Headlight and turn signal (P.2-47, P.8-25) ensure the best performance and proper operation
FRONT
7. Tires and wheels (P.5-3, P.6-2, P.8-28, P.9-7) of the vehicle if other brake fluid is used.
1. Hood (P.3-17)
2. Windshield wiper and washer (P.2-45, P.8-19)
3. Doors (P.3-2, P.3-4, P.3-8)
4. Outside mirrors (P.3-27)
5. Power windows (P.2-57)
0-4 Illustrated table of contents
Model "R35-D" EDITED: 2009/ 12/ 11