Plumbing and Australia provides excellent and quality assured services for all your plumbing and gas needs. They give services to schools, hospitals, medical centers, mining camps and energy sectors. Their services include installation, renovation, maintenance and more. For further details about their services, kindly visit the site http://www.plumbingandgasaustralia.com.au/about-us/
What are the components used in solar hot water system and how to install it
1. What are the main components used in
solar hot water system and how to
install it?
2. The components used in solar hot water system includes,
1. Solar collector panel:
A special type of fluid that transfers the heat to
the storage tank through a heat exchanger. The collector
captures the heat from the sun and transfer it to the liquid
circulating through the panel.
3. 2. Storage Tank:
The heat water captured by the collector panel is
stored in this tank for later use.
3. Expansion Tank:
The system’s pressure should not exceed the
pressure limit that is set by the system designer.
4. 4. Control system:
It consists of a controller and the circulating pump. If
the heat exchanger temperature crosses the collector panel’s
temperature, then the controller turns on the pump and
circulates the liquid through the system. If both the
temperature becomes equal the controller turns off the
pump.
5. 5. Flat plate solar collectors:
•
The absorber plate is the principal component used in
flat plate solar collectors.
• It consists of a copper sheet and copper tubing.
• The surface that strike by the solar radiation is converted
to thermal energy which is used to heat the liquid flowing
through the pipes.
6. 6. Evacuated tube solar collectors:
• There is a vacuum inside a glass tube and copper pipes
running through the centre.
• The copper pipes are connected to a manifold which is then
connected to a slow flow circulation pump.
•The evacuation tube system is used to extract the heat out of
the air
7. Installation of solar hot water system:
• Initially Check whether your site must be suitable for
solar application.
• You should do a plumbing work for circulating solar
heated water through a continuous loop.
• The reservoir must be placed in a line between the
well or city water source that feeds your house and
the cold water inlet pipe to the electric hot water
heater.
8. • The storage reservoir must be used to govern the
pump’s operation.
• Make sure about the obstacles in the plumbing
path which includes wiring, waterlines, ductwork,
headers, etc.
9. •Installation isn’t easy for an individual. If you are in a need of
professional plumbing worker to install solar hot water
system for you home, contact Plumbing & Gas Australia.
•Plumbing & Gas Australia is a Toowoomba based plumbing
and gas repair business which provides solutions for all your
plumbing needs. Their services include installations,
excavations, renovation, maintenance and more. They are
available 24/7 to assist your plumbing issues. For more details
about
their
professional
works,
kindly
visit
http://www.plumbingandgasaustralia.com.au/home/