http://www.needak.com/ The Needak Rebounder is a new breed of mini-trampoline as it has patented spring mechanisms that drive a very soft-bounce coupled with unparalleled quality.

1. The Needak Rebounder
Composition
http://www.needak.com

2. http://www.needak.com
Jump Mat - material
• This is one of the most important components of
the Needak rebounder because it is what causes
the user to bounce up and down.
• The quality of the material used to act as the
jump mat has to be the best in terms of safety
and durability.

3. http://www.needak.com
Jump Mat - permatron
• The material used to make this piece of the
rebounder is called permatron which refers to a
fabric designed specifically for rebounders and
trampolines.
• The permatron does not stretch unnecessarily
but is flexible which allows it to offer a stable
landing spot but at the same time, cushions the
user’s impact perfectly.

4. http://www.needak.com
Jump Mat - weather resistance
• Permatron I also recognized for its weather
resistance quality.
• It can cope well severe weather cases be it
moisture caused due to rain or spilled drinks.
• The mat can also handle strong sunlight as it has
90% Ultra Violet resistance making it a fabric
that can last a very long time without breakages
and unnecessary tear.

5. http://www.needak.com
Spring - material
• Needak uses two springs on its rebounders, the soft
bounce springs meant for the soft versions of
rebounders and the hard bounce springs meant for
the tougher rebounders, usually for heavier users.
• The uniqueness of the springs comes from the
material used to craft them, in this case, high carbon
steel music wire.
• This type of wire also referred to as spring steel or
piano wire is known to be very strong made to
withstand high tension and pressure.

6. http://www.needak.com
Spring - hard bounce
• The barrel shape of the 4 inch soft springs that
clip the center to the outside structure can each
absorb enormous pressure.
• The hard bounce springs slightly vary in shape
and absorb a lesser amount of pressure because
of the firmer structure are reinforcement.
• They are meant for athletes who need a more
demanding bounce surface or heavier
individuals-over 300 pounds.

7. http://www.needak.com
Rebounder frames
• These are round in shape and are the ones that
form the external structure of the rebounder.
• They measure 40 inches in diameter and are
constructed from heavy steel that are free of
lead.
• They are designed to evenly distribute the force
all over the Needak rebounder as a coping
mechanism.

8. For more info visit
http://www.needak.com