Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Analysis 2
1. I set the room size higher to 63, the dampening to 27 and
the initial delay to 22ms. Having the wet set much lower
would have been too quiet so I set the dry higher. This
allowed me to have a sound that was still clear and loud
but had an echo on the sound.
I set the gain to +7.8 dB, this significantly increase volume.
The feeback was set to 0.284 which created a deeper
sound. The mix was set to 0.867, without this the sound
had a very harsh metalic sound to it that was quite high
ptiched.