1. Password :
Change Password? (no:0 / yes:1):0
1. Setting
2. Maintenance
3. Monitoring
99. Exit
Select function No. :1
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :4
4. TX/RX frequency(8ch)
TX/RX frequency (0ch - 255ch) :8
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit

2. Select item No. :5
5. TX power ctrl(0dB)
MTPC TX power (-10 to 0dB) :-1
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (-1dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :5
5. TX power ctrl(-1dB)
MTPC TX power (-10 to 0dB) :-0
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :6
6. Main channel usage 1-16
( 1:used 2:used 3:used 4:used
5:used 6:used 7:used 8:used

3. 9:not used 10:not used 11:not used 12:not used
13:not used 14:not used 15:not used 16:not used )
Select channel No. :9
Channel 9 (used:0 / not used:1) :0
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU UNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :6
6. Main channel usage 1-16
( 1:used 2:used 3:used 4:used
5:used 6:used 7:used 8:used
9:used 10:not used 11:not used 12:not used
13:not used 14:not used 15:not used 16:not used )
Select channel No. :9
Channel 9 (used:0 / not used:1) :1
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit

4. Select item No. :12
12.Alarm table 1/2
Form C1 Form C2 Form C3 Form C4
1.INPUT LOSS --- --- --- ---
2.AIS RCVD --- --- --- ---
3.AIS SEND --- --- --- ---
4.OUTPUT LOSS --- OUT --- ---
5.TX CLK LOSS OUT --- --- ---
6.FSYNC ALM --- OUT --- ---
7.HIGH BER ALM --- --- --- ---
8.LOW BER ALM --- --- --- ---
9.BER ALM --- OUT OUT ---
Press any key to continue ...
12.Alarm table 2/2
Form C1 Form C2 Form C3 Form C4
10.MOD ALM OUT --- --- ---
11.DEM ALM --- OUT --- ---
12.OPR ALM OUT OUT --- ---
13.TX PWR ALM OUT --- --- ---
14.RX LEV ALM --- OUT --- ---
15.APC1 ALM OUT OUT --- ---
16.APC2 ALM --- OUT --- ---
17.IF INPUT ALM OUT --- --- ---
18.MAINT MASK MASK MASK OUT
Select item No. (1-18 , 0:no change) :0
Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :00
1. Setting

5. 2. Maintenance
3. Monitoring
99. Exit
Select function No. :3
Monitoring
1. Monitoring voltage
2. Monitoring voltage(continuous mode)
3. Alarm/Status
4. Inventory
00. Menu
99. Exit
Select item No. :1
1. Monitoring voltage
TX power :*.**
RX level :*.**
Monitoring
1. Monitoring voltage
2. Monitoring voltage(continuous mode)
3. Alarm/Status
4. Inventory
00. Menu
99. Exit
Select item No. :3
3. Monitoring of alarm/status 1/2
IDU
INPUT LOSS 1-16 (alarm:-*-- ---- ---- ----)
CHANNEL USAGE ERROR 1-16 (alarm:---- ---- ---- ----)
AIS RCVD 1-16 (alarm:*-** **** ---- ----)
AIS SEND 1-16 (alarm:**** **** ---- ----)
OUTPUT LOSS 1-16 (alarm:---- ---- ---- ----)
TX CLK LOSS (alarm:-)
FSYNC ALM (alarm:*)
HIGH BER ALM (alarm:*)
LOW BER ALM (alarm:*)
BER ALM (alarm:*)
Press any key to continue ...
3. Monitoring of alarm/status 2/2
MOD ALM (alarm:-)
DEM ALM (alarm:*)
OPR ALM (alarm:*)
ODU
TX PWR ALM (alarm:-)
RX LEV ALM (alarm:-)
APC1 ALM (alarm:-)

6. APC2 ALM (alarm:-)
IF INPUT ALM (alarm:-)
MUTE (off)
TX/RX FREQ CH (0ch)
Press any key
Monitoring
1. Monitoring voltage
2. Monitoring voltage(continuous mode)
3. Alarm/Status
4. Inventory
00. Menu
99. Exit
Select item No. :4
4. Inventory 1/2
IDU
Serial number 87732
Manufactured date APR/2006
Software version(ROM/RAM) (1.20/2.49)
Bit rate 2/4/8/16x2MB
Option module
Press any key to continue...
4.Inventory 2/2
ODU
The abnormalities in communication
Press any key
Monitoring
1. Monitoring voltage
2. Monitoring voltage(continuous mode)
3. Alarm/Status
4. Inventory
00. Menu
99. Exit
Select item No. :00
1. Setting
2. Maintenance
3. Monitoring
99. Exit
Select function No. :1

7. Setting
1. Bit rate (16x2MB)
2. AIS RCVD alarm/status (status)
3. AIS SEND alarm/status (status)
4. TX/RX frequency (8ch)
5. TX power ctrl (0dB)
6. Main channel usage 1-16 (used:UUUU UUUU NNNN NNNN)
7. BER alarm threshold (10-6)
8. Frame ID (2)
9. DSC1 (232)
10. DSC2 (232)
11. DEM invert (off)
12. Alarm table
13. Next items
00. Menu
99. Exit
Select item No. :00
1. Setting
2. Maintenance
3. Monitoring
99. Exit
Select function No. :99
EXIT