George Braswell's Assembly Department at Command Tech can assemble machined parts into larger components.

1. Command Technology, Inc.
Phone: 410-360-2920

2. Assembly
n Assembly is the process of taking separate
machined parts and joining them together into a
new component or completed part.

3. Assembly Department

4. Steps
n Parts are first machined by the CNC
department.
n Next parts are deburred and cleaned.
n Some parts receive a special finish prior to
assembly.
n The multiple parts are then assembled together.
n Some parts receive a special finish after
assembly.

5. Helicoils
n Many parts have helicoils installed by assembly
prior to the smaller assemblies being joined for a
larger assembly.

6. Marking
n The assembly department also performs
marking.
n This includes a part number and dash number,
rev (revision) and manufacturers number.

7. Assembly Department
n The assembly department uses different tools to
install helicoils.
n They also make use of a press, hand tools and
files as needed.

8. Assembly Department Employees
n Employees must be properly trained to read
blueprints, specs and marking procedures.
n They must be able to make sure that all
components are included in the final assembly.

9. Assembly Department

10. Assembly Department

11. Assembly Department

12. Assembly Department

13. Assembly Department

14. George Braswell, President

16. Command Technology, Inc.
7604 Energy Pkwy.
Curtis Bay, MD 21226
Phone: 410-360-2920