Design, manufacturing, machining, inclusion of realistic defects using different techniques for industry. Such reference blocks can be used for calibration, validation or demonstration via NDT. Relevant for several industry prodiles, from manufacturers to NDT inspection agencies. We offer the service on different materials.
TrustArc Webinar - Unlock the Power of AI-Driven Data Discovery
Manufacturing of reference blocks for NDT
1. WE DESIGN AND
MANUFACTURE REFERENCE
BLOCKS WITH INDUCED
DEFECTS FOR INDUSTRY
Based on customer design or on own ones according to
established codes, including precise placement of defects
with a wide variety of piece geometries and alloy types.
Samples or blocks manufactured by ITMA Foundation are
used in different industries for facilitating design and
qualification of monitoring procedures, operator´s
homologation and NDT staff training.
Materials we work with:
· C-Mn Structural Steels
· High T-P Steels: Cr-Mn, Cr-Mo-V
· Corrosion and Wear resistant steels
· Cryogenic Steels: Ni Base, 9% Ni
· Foundries
· Steels for Nuclear Industry
· Armour steel plate
· Alloys for Aeronautical use
DRelevant for the following
Non-Destructive Tests:
· Conventional UT, TOFD and Phased Array
· Radiography
· Penetrating Liquids and
magnetic particles testing
· Visual Inspection
C/ Calafates 11 (Parcela L.3.4)
33417 Avilés - Asturias
(Spain)
Phone.: +34 985 129 120
Fax: +34 985 129 008
Contact:
info@itma.es
www.itma.es
ITMA Materials Technology
counts on a fully equipped set of facilities
that allows assuming the whole block
manufacturing cycle, including design, bevel
machining, manual, automatic and robot
welding, dimensional control and thermal
treatments.
REFERENCE BLOCKS MANUFACTURING
SERVICES FOR NON-DESTRUCTIVE TESTING:
Relevant service for:
Pressure Vessels Manufacturers,
responsibility structures for
petrochemical, nuclear, offshore,
aeronautics or military sectors,
NDT inspection agencies and NDT
Training Centres.
We include induced defects by micromachining or
electroerosion, and realistic defects through
controlling welding parameters: pores, cracks, lack
of fusion, slags, etc. Pilot Plants for Hydrogen
embrittlement and corrosion are also available.
CALIBRATION
VALIDATION
DEMONSTRATION
Based on customer design or on own ones according to
established codes, including precise placement of defects
with a wide variety of piece geometries and alloy types.
Samples or blocks manufactured by ITMA Foundation are
used in different industries for facilitating design and
qualification of monitoring procedures, operator´s
· Cryogenic Steels: Ni Base, 9% Ni· Cryogenic Steels: Ni Base, 9% Ni
· Foundries
· Steels for Nuclear Industry· Steels for Nuclear Industry
· Armour steel plate· Armour steel plate
· Alloys for Aeronautical use
Based on customer design or on own ones according to
established codes, including precise placement of defects
with a wide variety of piece geometries and alloy types.
Samples or blocks manufactured by ITMA Foundation are
used in different industries for facilitating design andC
M
Y
CM
MY
CY
CMY
K
anuncio F. ITMA ingles.pdf 3 1/9/16 11:33