Imenco aviation/ helicopter refueling fueling-brochure-al cohen

AVIATION
FUELLING SYSTEMS
enGineered tO tHe BeSt

Developing smart solutions for offshore and
maritime industries for more than 30 years

Contents
Introduction and History 04
Systems and Regulations 07
Aviation Fuel Dispenser Unit 08
Aviation Fuel Pump Unit 10
Aviation Tanks and Skids 12
Aviation Test and Recycling System 14
Automation and Instrumentation 15
Faudi Aviation 16
Offshore Services 17
Production Facilities 18
Range of Products 21
Worldwide Service 22
Partners 23

imenco.com 03

introduction
SerViCeS
Imenco is a major Our engineering
EPC-contractor to team is specialized
• Aviation Fuel Systems
in the area of
offshore maritime mechanics, hydraulics • CCTV Systems
industries. and electronics
Imenco design, engineering and we • Ex Camera Systems
develop and provide services for
manufacture some of the worlds • Lifting and Handling
helicopter fuel leading oil and
drilling companies. • Diving Systems
systems, diving
systems, industrial Imenco is approved • Subsea Cameras
CCT systems, ex by Achilles and DNV,
cameras, lifting and and our integrated • Subsea Lights and Lasers
handling products, management system
subsea cameras, • Special ROV Tools
is certified according
lights and lasers. to NS-EN ISO 9001: • Engineering Services
Thirty years of 2008.
experience gives our
customers added
value and smart
solutions.

04

History
Imenco’s history Having one of The following pages
goes back to 1979 the world best will pin point our
and through the experience and
acquisition of Setec production lines quality that gives you
Contracting in 2005, for Helicopter the value needed
Imenco gained 28 Fuelling Systems, from your provider
years of knowledge Imenco can of Helicopter Fuelling
and experience within offer in-house Systems.
the aviation fuelling
industry. Today, with
engineering and
more than 30 years design with an
of experience, Imenco excellent service,
is one of the leading which maintains
companies in this customer
field and has set the
satisfaction.
standard for high
quality, cost efficient
and customer
orientated Helicopter
Fuelling Systems.

05

Systems and regulations
Imenco manufacture a wide range of systems within aviation
fuel systems and the main product is helicopter fuelling
systems for use offshore.
With a proven track The information in Transportable
record, Imenco is a CAP 437 has been tanks are provided
preferred vendor for compiled by UKOOA with certificates
offshore installations in consultation with according to DnV
worldwide. the offshore industry. 2.7-1. Transport frame
supplied with test
In close relationship Other relevant
report and separate
with Faudi Aviation regulations are:
certificate. Filter
in Germany, and
• CAP 074 Aircraft system approved
other well known
Fuelling, Fire according to EI1581
and branch accepted
Preventions and and 1583.
manufacturers of high
quality components, Safety Measures. With emphasis on
Imenco manufacture top grade material
• CAP 434 Aviation
the best products and workmanship
Fuel at Aerodromes.
available, and with our Aviation Fuel
a normal life span • CAP 748 Aviation Systems are delivered
of 25 years. Fuelling and according to client’s
Fuel Installation specification and
Systems are designed
Management. international
and manufactured
standards.
according to stringent For the Norwegian
international and sector of the North The Imenco
national standards. Sea, OLF have an systems are virtually
Service and additional regulation maintenance free
maintenance are called “Helideck under all weather
performed globally Manual” and we conditions, these
and we take pride have systems built reliable all round units
in our quality and according to NORSOK can be equipped with
are reluctant to as well. Fuel Sampling and
compromise with Recycling Unit as a
our high standard. Our design is stand-alone systems
approved by DnV, BV that meets the
The systems are and ABS. Pressure recognized standards
based upon CAP (Civil vessels designed by of environmental
Aviation Publication) ASME VIII in general; protection and
437, as requirements order codes upon operational safety.
necessary for the request.
fuelling of helicopters
on offshore
installations and
vessels.

07

aviation Fuel dispenser unit
Imenco’s standard dispenser is designed to fulfil requirements for Helicopter Fuelling
Systems worldwide and can easily be upgraded to project specific requirements.
The dispenser unit is Standard equipment
designed for quick
installation, safe and • Triple filter (separator and monitor)
easy operation. EI 1581 and EI 1583 (previously
known as API 1581/1583).
A number of options
can be chosen for the • Flow meter with mechanical register.
standard dispenser, to
comply with specific • Instruments.
client specifications.
• Local control panels.
The standard design
is based on a stainless • Hose reel.
steel drip tray/base
frame and enclosed • Filling nozzle.
with an aluminium
• Bonding reel.
shelter of high
offshore quality. • Yellow flashing light.
This gives the unit
need for minimal
maintenance.
OptiOnal equipment

• Afguard, water sensor for instant control
of water content in fuel and auto stop
on high level.

• Flow meter electronic.

• Control panel with full communication
with master system.

• Grounding tester (with automatic shut down).

• Closed sample system with sample glass.

08

aviation Fuel pump unit
The Imenco aviation pump unit can be delivered with different
option depending on requirements; with one or two pumps,
either pneumatic or electrical motor(s).
A double pump
unit gives flexibility
in case of ongoing
maintenance to one
of the pumps or
motors.
Imenco standard
design is based on
a stainless steel drip
tray/base frame
and enclosed with
an aluminium shelter
of high offshore
quality. This gives the
unit need for minimal
maintenance.

10

Standard equipment

• Sliding vane pump.

• Electrical or pneumatic motor.

• Strainer.

• Instrumentation.

• Filter and regulator (lubricator if air motor).

OptiOnal equipment

• Motor control centre.

• Frequency controlled motors.

• PSV - full flow.

11

aviation tanks and Skids
Transportable Storage tanks The quality of the
tanks (2,900 litre), are preferred at tanks are normally
installations where stainless steel with
are delivered with fuel consumption mild steel lifting
necessary approvals is significant. frame.
as DNV 2.7-1. Storage tanks are
Lay down skids will
EN12079, IMDG normally delivered
be provided with
or ADR/RID. with capacity from
a protection frame
4,000 to 24,000
Designed to CAP that can be used to
litres. Material and
437, ASME VIII Div.1 support the deluge
approvals according
and tested to DNV system.
to project specific
and IMDG code. requirements can We are also able to
Transportable tanks be provided. include a fire fighting
with other capacities system in both deluge
can also be delivered. systems and sprinkler
systems. Quality and
materials are often
either galvanized
steel, SS316L, Cu-Ni,
or titanium.

12

VariOuS Standard SKidS

• Skid for 1 off transportable tanks.

• Skid for pump unit and 2 off transportable tanks.

• Skid for pump unit and 3 off transportable tanks.



• Release frame for 2 off transportable tanks.

• Skid for pump unit and 1 or 2 off storage tanks.

• Skid for 1 or 2 off storage tanks.

13

aviation test and recycle System
A separate stand-alone unit for fuel testing and recycling equipment
is available for optimal environmental control and safe operation.
The cabinet is Our standard design Standard
connected to the is based on a stainless equipment
fuel storage tank and steel drip tray/base
dispenser unit. The frame and enclosed • Sliding vane pump.
fuel will be handled with an aluminium
in a closed system, shelter of high offshore • Pneumatic motor.
avoiding spillage and quality. This gives the • Strainer.
exposure of fuel for unit need for minimal
the operator. After maintenance. • Filter separator.
sample has been
Other required
taken and controlled, • Instrumentation.
equipment can be
the sample fuel
integrated as an • Filter, regulator and
will be stored in a
option. lubricator.
separate enclosed
tank within the unit.
• Fuel tank - 200 litre.
The fuel will be
filtered and cleaned • Sample glass.
before transferred
back to fuel storage • Ex light.
tank.

14

automation and instrumentation
Control systems can be delivered from
basic relay controlled panels to highly
automated systems controlled by PLC.
The most advanced Both control panels
system will be running and MCC can be
its own samples, made for zones one
recording and logging or two or in non
the sample results hazardous areas.
and uploading the
All of our systems
status to the master
are built in-house
system continuously.
by our highly skilled
engineers and
technicians

15

Faudi aviation
Faudi Aviation GmbH & Co. KG (Germany) was founded
in 1938 by Fritz Faudi and has been continuously involved
in the filtration and separation of aviation fuels, industrial
liquids and gases. Imenco is an exclusive representative
for Faudi Aviation in Norway.
Faudi Aviation are Faudi Aviation have Faudi Aviation also
an active, worldwide a highly experienced benefits from having
company, well known workforce of the largest, most
in the field of aviation engineers ready and modern civil Aviation
fuel filtration. able to assist with Fuel Test Rig of
whatever filtration or its kind, enabling
With over 60 years
separation problems continued product
of experience and
or requirements you development and
modern production
may have. dynamic testing under
methods, FAUDI
controlled conditions
Aviation offers highly
of filter elements and
efficient and cost
systems designed
effective solutions to
to meet all of our
a range of filtration
customer’s needs.
and separation
problems.

16

Offshore Services
Imenco is • Imenco is approved • Based on our long • Minor or larger
approved by by CHC Helicopter experience, our tailor rebuilds or
Service and Bristow made inspection modifications
the Norwegian Norway for offshore program will be can usually
Helicopter inspections. The made for each be performed
Operators in annual inspection installation and our during the annual
order to perform gives a system service can include inspection.
annual surveys approval for 1 year. any Helicopter
Fuelling System, • Our standard
for Helicopter • Imenco is also from any supplier. inspection
Fuelling System approved by equipment includes
on the Norwegian HCA (Helideck • Imenco have a huge a calibrated particle
continental shelf. Certification variety of spare parts counter, enabling
Agency) to perform and filters in stock. Imenco to make a
These inspections are inspections of Unique parts can be specific quality test
performed by our Helicopter Fuelling kept available upon of the delivered fuel
experienced team and Systems. request. without sending
well trained offshore samples to a
inspectors. A complete • We have calibrated laboratory.
report, including flow meters and
performed work and gauges that can
any deviations from test and approve
the regulations, will your equipment
be made after the offshore during the
inspection. inspection.

17

production Facilities
The Imenco It also includes a
workshop is separate ”clean”
workshop for
located at Grinde, the construction
15km outside the of control room
head quarters equipment and
in Haugesund, panels. This includes
Norway. test facilities for full
scale testing for flow,
Imenco’s production leakage and pressure.
facility is a modern In addition to this we
workshop with a have a DnV approved
complete production cleaning procedure
line for Aviation Fuel for tubing and piping.
Systems, fully covered
by crane. The Imenco workshop
employ highly
The facility includes trained engineers
a welding workshop and production
for SS316L, CuNi, personnel, dedicated
6MO and titanium, a to make the best
machine department Aviation Fuel Systems
for cutting, drilling available. All of our
and milling and also a welding engineers are
tension testing station certified.
for lifting equipment.

18

Before any system
is delivered to our
customers, a full scale
test is performed
at our separate test
department.
The production
facilities are also
certified to comply
with 5S Standard.
Office area:
500m2
Production area:
2,100m2
Outdoor area:
4,000m2

19

range of products

Our services are Imenco is a preferred vendor for “unique”
not limited to systems, especially when this includes larger
storage tanks and advanced instrumentation.
production of
Helicopter Fuelling Our experience and knowledge within the
Systems. aviation fuelling industry have led to variety of
very prestigious projects around the world.
During the last
years we have • An automated fuelling system, for one of the
been involved in a world most advanced missiles, delivered to
variety of projects, Kongsberg Defence and Aerospace (KDA).
from engineering
to manufacturing • SS316L cabinets for storing of chemicals to
of highly advanced BP Norge As.
aviation systems.
• Complete deluge/foam fire fighting system
One example of (AFFF).
this is a fuelling
system for the • A highly advanced fuelling station to the
worlds most advance Antarctica for a research base.
missile system for
Kongsberg Defence • A highly accurate and comprehensive
and Aerospace. Faudi system to test the water content
Another example is in aviation fuels.
the large scale fuelling
• In-depth experience in delivering fuel systems
system produced for
for sub-zero environments, such as our
an Indian research
projects in Antarctica and the Shtokman field.
station based in the
harsh environments of • Our combined partnership with Faudi Aviation
Antarctica. gives Imenco unique experience in the most
Half of our advance filter systems available for any kind of
production is filtration solution.
standard equipment,
often delivered “off
the shelf” at very
competitive prices.
The other half is
specially designed
equipment to
meet the specific
requirements from
our customers.

21

Worldwide Service
Even though Imenco is recognized • We supervise
our head office around the world the installations
as the most valued of fuelling
is located in manufacturer of systems on site.
Norway, there Aviation Fuelling
are no limitations Systems with high • Offshore
to where we can focus on quality and and onshore
service for more than commissioning.
perform
30 years.
our services. • Initial system start-
For local support up after arrival to
Our highly trained
Imenco have branches final destination.
service engineers
are often travelling in Norway (Bergen
• Offshore service
around the world for and Stavanger),
and inspection of
system start-ups and United Kingdom
fuelling systems.
commissioning. (Aberdeen) and USA
They can also repair (Houston). For the • Practical and
and modify any other rest of the world technical
existing systems from we collaborate with clarification and
other suppliers. agents in China, HAZOP meetings
Korea, Vietnam, on request.
End users or Malaysia and
regulations often Argentina.
require a separate
start-up at the final
destination; in cases
like this Imenco will
be there to assist you.

22

partners
Statoil
Seadrill Offshore
BP
TeeKay Corporation
Shell
Total
Esso Norge AS
Aker Solution ASA
Exxon Mobile
Samsung Heavy Industries
Hyundai Heavy Industries
Daewoo Shipbuilding &
Marine Engineering
ENI
Pacific Drilling
Noble Drilling
Pride
Transocean
Maersk
Petrobras
Gazprom
NACOR (National Centre
and Ocean Research)

All information is correct at time of printing. Imenco reserve the right
to change features and specifications without prior notice or approval.

HQ Haugesund, Norway
+47 528 64 100
imenco@imenco.no

Aberdeen, Scotland
+44 (0)1224 701749
imenco@imenco.co.uk

Houston, North America
+1 (713) 480 7777
imenco@imenco.com For all other regions please visit www.imenco.com

Imenco aviation/ helicopter refueling fueling-brochure-al cohen

Recomendados

Recomendados

Más contenido relacionado

Último

Último (20)

Destacado

Destacado (20)

Imenco aviation/ helicopter refueling fueling-brochure-al cohen