BOW 2024 - 3 1 - Les infrastructures équestres et le changement climatique
Resume
1. Comprehensive Resume' Of
Joel David Ramos
BSME, RME Lic # : 0044738 (PHILS)
ADDRESS:
13915 Sherman Way #109
Van Nuys, CA
91405-2500 USA
Tel.#.: 1.818.378.8567
Emails: joelramos725@gmail.com
joelramos983@yahoo.com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - -
WORK EXPERIENCE
Realtech Construction Co., LLC
ONE PARK PLAZA
3250 Wilshire Blvd. ste. 704
Los Angeles, CA
90010 USA
Building Engineer
Feb 2014- Present
DUTIES AND RESPONSIBILITIES
Analyze all equipment to improve operations and efficiencies.
These equipment include:
· Heat Pumps/ Cooling Towers/ Water Softener system/ Boilers/
Centrifugal pumps ( 840 GPM) and (50 HP) Motors/ Water
Sprinkler System/ Water pumps/ Diesel Engines (ICE)/ 1.5 MW
Diesel Engine/ Fire Pumps And Motors/ Fans and Blowers/Air
Filters For Supply And Air Exhaust Systems.
Formulates and develops preventive maintenance schedules and
checklists on all equipment used in the building mentioned above.
Planning, scheduling and Evaluating preventive maintenance of
equipment used in the operation of building.
2. Maintain proper operations of all HVAC systems, Mechanical,
Electrical and Plumbing systems throughout the building to
minimize downtime operation and maximize effectiveness and
safety.
Conduct performance test on every HVAC unit to be installed to
assess its performance and efficiency.
Maintain parts and equipment stocks and inventory.
Maintain Maintenance logs, checklists and records.
In-Charge in:
· monthly testing of three (3) backup Diesel Engine Generators to
ensure reliability,
· the Maintenance of water softener system used for the cooling
towers by maintaining safe PH level, conductivity, turbidity and
etc,
· weekly testing of two (2) backup 250 HP Diesel Engine and Fire
pumps.
JOB EXPOSURES
· Assist in maintaining the entire building property, including the
physical building structure, all Mechanical, Electrical, Plumbing
(MEP), HVAC systems and related equipment with particular
attention towards safety, guest satisfaction, security and assets
protection.
· Conducts daily property tour to visually assess the safe and
efficient maintenance and operation of the physical structure of
the building.
· Assist in identifying energy savings and other operation cost
reduction.
· Assist in supervising the day to day operations of Engineering
and Maintenence department.
· Assist in research and recommendations for more cost-effective
and efficient methods of operating and maintaining building
3. systems.
· Installation of HVAC unit w/c include duct works and piping
installations, brazing and soldering.
· Oversees and inspects the work performed by vendors and outside
contractors.
Routine repairs as per request. These requests include :
· HVAC troubles;
· Power outage;
· Ballast replacement;
· Door locks repairs and installations;
· Plumbing repairs, i.e. leaky/clogged pipes, faucets and
other
maintenance/technical assistance as needed.
Assists in Carpentry works as needed i.e.
· hanging/repair and painting Drywalls,
· install kitchen Cabinets/sinks/urinals/toilets and etc,
· install Floors and Carpets, and etc.
Maintain life safety, environmental and emergency procedures and
programs per local and building codes.
Provides emergency response services 24/7.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
: : : : : : : : : : :
JORAM Car Trade Centrum
Metropolis Star Mall
Alabang, Muntinlupa
Metro Manila
Proprietor
Feb 2003 – 2013
4. Business Profile And Job Exposures
· Buying And Selling Of pre-owned cars.
· Diagnoses newly acquired pre-owned motor vehicles' troubles.
· Prepares motor vehicle, if necessary, for Engine repair, body
repainting, Tune ups and troubleshooting.
· Negotiating the price of the car and explaining/ emphasizing its
features.
· Maintaining sales records.
· In-charge in all paperworks for vehicles documentation, i.e.
financing, transfer of ownership and etc.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
: : : : : : : : : : :
SIMON CORPORATION
Yanaizu City, Fukushima
Fukushima, Japan
Lead Maintenance Engineer
July 1995 - Nov 2002
DUTIES AND RESPONSIBILITIES
· Researched And Development on Mechanical enhancements And
technical feasibility of new machines and designs.
· In-charge in the maintenance of the following Equipment &
pneumatic machines:
2 (two) unit Diesel Engines.
2 (two) unit Air compressors
4 (four) unit Injection And molding machines,
· Assist in the scheduling of maintenance of 2.0 MW Diesel Engines.
· Reports activities undertaken as well as the operating conditions
of all operational equipment.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
: : : : : : : : : : :
ROHM ELECTRONICS PHILIPPINES, INC.
PTC Carmona
Cavite, Philippines
5. Maintenance Supervisor - Section Head
Equipment Control Department/ Power Plant Section
Engine/ Generator Section
Sept. 1992 – July 1995
DUTIES AND RESPONSIBILITIES
· Planning/Organizing work activities in Maintenance section,
· Develops and implements cost saving measures.
· Formulates maintenance procedures and checklist for (5) units
NIIGATA DIESEL ENGINEs coupled with NISHISHIBA SYNCHRONOUS
GENERATORs And its Auxiliaries.
· In-charge in the scheduling of preventive maintenance of Diesel
Power Plant And the following Auxiliaries,
· Training and Orientation of new recruits in both Operation &
Maintenance Of Diesel Engine Power Plant and auxiliaries
mentioned above,
· In-charge in controlling spare parts And Tools inventories,
· Planning, implementing and checking of work order-including
coordination and consultation of Engine Maker,
· Assist in the maintenance of 5 unit KOBELCO Air Compressors model
AL-132 and two (2) unit HENSCHEL BOILERS model HKL-1800KL.
· Formulates preventive maintenance of Diesel Power Plant And the
following Auxiliaries below:
Fuel Oil Filters
Lubricating Oil Filters
Line Heaters (for Bunker Fuels)
Oil Purifiers
Oil Viscosity controllers
Cooling Towers And
Fans, Pumps and Motors
JOB EXPOSURES
· Operation and Maintenance of two (2) unit NIIGATA DIESEL ENGINES
model 12V32CLX, 5820 PS output, 4 cycle coupled with NISHISHIBA
Generator with the following specifications:
4.1 Mega Watt (MW), 4160V, 80% power factor,
600 rpm, 3 phase.
· Operation and Maintenance of three (3) unit NIIGATA DIESEL
ENGINES model 6L32CLX, 2878 PS output, 4 cycle coupled with
NISHISHIBA Generator with the following specifications:
6. 2.0 Mega Watt, 4160V, 80% power factor, 600 rpm, 3 ph.
· Operation and maintenance of five (5) unit KOBELCO screw type
and oil free Compressors model AL 132 And two (2) unit EBARA
HENSCHEL Boilers model HKL 1800KA.
· Maintenance of Cooling Towers, electric motors and pumps, small
compressors, Supply Fans, Exhaust Fans And Air Filters.
· Maintenance of Lubricating Oil Purifiers and Filters, Fuel Oil
Filters and Viscosity controllers.
· Maintenance of Pneumatic machines used for the production Of
Micro chip Resistors and Capacitors.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
: : : : : : : : :
ROHM Fukuoka Company, LTD.
Oita City
Fukuoka, Japan
Maintenance Engineer
Semi Process (CSA/CBA Department)
Dec. 1991 – Sept. 1992 ( Carmona, Cavite, Phils.)
Jun. 1991 – Dec. 1991 ( Fukuoka, Oita, Japan )
DUTIES AND RESPONSIBILITIES
· Research And Development on Mechanical enhancements And technical
feasibility of new machines and equipment designs used for the
production of micro-chip resistors.
· Repair And Troubleshooting of electro pneumatic machines used for
the production of micro-chip resistors,
· Assist in the scheduling of preventive maintenance of electro-
pneumatic machines used for the production of micro-chip
resistors in CSA/CBA Department.
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
: : : : : : : : : : :
ARGONNE ENGINEERING AND CONSTRUCTION
San Juan City, Metro Manila
Philippines