Assignment Writing Service http://StudyHub.vip/03-Refs-To-Thesis--INNOVATIVE-MECHANICA

1. 207
Bibliography and References
Three separate bibliographies/references are included. They follow as B1, B2 and
B3.This categorization was done because research for the thesis fell into three distinct
areas:
B1: Engineering Design Process, Methodology and Science.
B2: Pumps, Ground Fluid Technology, Technology and Relevant History.
B3: Historical Research.
B1: Bibliography and References for Engineering Design
Process, Methodology and Science
Ahn, J. S. and Crawford, R. H., 1994; “Complexity Analysis of Computational
Engineering Design Process”, Design Theory and Methodology 68: 205-220.
Akin, J. E., 2003; Finite Element Analysis with Error Estimation, See the website:
http://mems.rice.edu/akin/
Alder, P. S., August 1989; “CAD/CAM: Managerial Challenges and Research
Issues”, Transactions on Engineering Management vol. 3, no. 3: 202-215.
Alderman, N., Maffin, D., Thwaites, A., Braiden, P. and Hills, W., 1996; Engineering
Design and Product Development and its Interface with Manufacturing:
End of Award Report to ESRC, Newcastle upon Tyne: CURDS, University of
Newcastle.
Al-Salka, M. A., Cartmell, M. P. and Hardy, S. J., 1998; A Framework for a
Generalized Computer-based Support Environment for Conceptual
Engineering Design, Carfax Publishing Ltd.
Altshuller, G. S., 1999; The Innovation Algorithm: TRIZ, Systematic Innovation
and Technical Creativity (1st
Ed), Worcester, MA: Technical Innovation
Center, Inc.
Altshuller, G. S., 1997; 40 Principles: TRIZ Keys to Innovation (1st
Ed), Worcester,
MA: Technical Innovation Center, Inc.
Altshuller, G. S. (Translated by Shulyak, L.), 1996; And Suddenly the Inventor
Appeared: TRIZ, the Theory of Inventive Problem Solving (2nd
Ed),
Worcester, MA: Technical Innovation Center, Inc.

2. 208
Altshuller, G. S., 1988; Creativity as an Exact Science: The Theory of Inventive
Problem Solving, New York: Gordon and Breach.
Anderson, J. R., 1983; the Architecture of Cognition, Harvard University Press.
Anderson, J., Dooley, K. and Subra, A., 2001; “Maturity and its Impact on New
Product Development Project Performance”, Res Eng Design 13: 23-29.
Andrews, D., 23-25 June 1997; “State of the Art Report on Design Methodology”,
Proceedings of IMDC '97: International Marine Design Conference, Newcastle
upon Tyne.
Angrist, S. W., 1982; Direct Energy Conversion, 4th
ed., Allyn and Bacon, Inc,
Boston.
Araujo, C. S., Benedetto-Neto, H., Campello, A. C., Segre, F. M. and Wright, I. C.,
1996;. “The Utilization of Product Development Methods: A Survey of UK
Industry”, Journal of Engineering Design 7: 265-277.
Ashby, W. R., 1968; An Introduction to Cybernetics, London: Methuen University.
Baker, J. D., Gonzalez-Zugasti, J. P. and Otto, K. N., 2001; “Assessing Value in
Platformed Product Family Design”, Res Eng Design 13: 30-41.
Balazs, M. E., Brown, D. C., Bastien, P. and Wills, C. E., 1996; Graphical
Representation of Designs: A Knowledge Intensive Design Approach,
Worcester Polytechnic Institute, Dept of Computing Science.
Balazs, M. E., Brown, D. C., 1996; Design Simplification by Analogical Reasoning,
Worcester Polytechnic Institute, Dept of Computing Science.
Bashir, H. A. and Thomson, V., 1999; “Metrics for Design Projects: a Review”.
Design Studies 20: 263-277.
Baxter, I., 1990; Transformational Maintenance by Reuse of Design Histories,
University of California at Irvine: PhD dissertation, Information and Computer
Science.
Berridge, M. J., 1995; Developing a Competitive Tool Manufacturing Unit within
Rover Body and Pressings, John Moores University, Liverpool: MA Thesis.
Bettig, B. P., 1999; Graph-Based Geometric Problem Solving System For
Mechanical Design and Manufacturing’ Arizona State University.

3. 209
Birmingham, R., Cleland, G., Driver, R. and Maffin, D., 1997; Understanding
Engineering Design: Context, Theory and Practice, Hemel Hempstead:
Prentice Hall.
Blanchard, B. S. and Fabrycky, W. J., 1990; Systems Engineering and Analysis (2nd
ed.), Prentice Hall, New Jersey.
Blessing, L. T. M. (Ed), April 1995; International Network of Engineering Design
Research Newsletter, Cambridge University, UK: Department of Engineering.
Blessing, L., Chakrabarti, A. and Wallace, K., 1995; “A Design Research
Methodology”, Proceedings of ICED '95: 50 ff. Zurich: Heurista.
Boehm, B. W., 1981; Software Engineering Economy, Englewood Cliffs, NJ:
Prentice-Hall.
Bond, A. H. and Gasser, L., 1992; “A Subject-indexed Bibliography of Distributed
Artificial Intelligence”, IEEE Trans. SMC, vol. 22, no. 6: 1260-1281.
Brachman, R. J. Levesque, H. J., 1985; “The Knowledge Level of a KBMS.” On
Knowledge Base Management Systems (Islamorada), 1985: 9-12.
Bracewell, R. H. and Sharpe, J. E. E., 1996; Functional Descriptions used in
Computer Support for Qualitative Scheme Generation- “Schemebuilder,
Engineering Design Centre, Lancaster University, UK.
Braha, D. and Maimon, O., 1998; A Mathematical Theory of Design: Foundations,
Algorithms, and Applications, Boston: Kluwer.
Bronikowski, R. J., 1986; Managing the Engineering Design Function. New York:
Van Nostrand Company.
Bucharelli, L. L., 1984; Designing Engineers, The MIT Press, Cambridge, England.
Buchanan, B. G. and Shortliffe, E. H., 1984; Rule-Based Expert Systems: The
MYCIN Experiments of the Stanford Heuristic Programming Project,
Addison-Wesley, Reading, MA. See website below.
http://smi-web.stanford.edu/pubs/abstracts_by_author/Buchanan,B.papers .html
Buede, D. M., 2000. The Engineering Design of Systems: Models and Methods, New
York: Wiley.
Busby, J. S. and Payne, K., 1998; “The Situated Nature of Judgment in Engineering
Design Planning”, Journal of Engineering Design 9: 271-293.

4. 210
Chacrabarti, A., (Ed.), 2001; Engineering Design Synthesis Understanding,
Approaches and Tools, Springer, London.
Chakrabarti, A and Bligh, T. P., 2001; A Scheme for Functional Reasoning in
Conceptual Design, Design Studies, 22, pp 493-517, Elsevier Science Ltd.
Calinescu, A., Efstathiou, J, Schirn, J., and Bermejo, J., 1998; “Applying and
Assessing Two Methods for Measuring Complexity in Manufacturing”,
Journal of the Operational Research Society no. 49: 723-733.
Card, S. K., Moran, T. P. and Newell, A., 1983; The Psychology of Human-Computer
Interaction. Hillsdale, NJ: Lawrence Erlbaum Assoc.
Chan, B., 1998; Supporting Conceptual Design: A Methodology and Infrastructure
for CAD, Carnegie Mellon University, PhD Thesis.
Channon, S. S. and Menon, U., 1994; Concurrent Engineering: Concepts,
Implementation and Practice, London: Chapman & Hall.
Chawdhry, P. K., 28-30 September 1994; Document Design Based on an Information
Modeling Approach, IEEE Int. Conference on Professional Communication,
Banff, Alberta, Canada.
Chen, A., 1991; A Computer-Based Design History Tool, Oregon State University:
PhD Thesis for the Department of Mechanical Engineering.
Chen, A., McGinnis, B. and Ullman, D. G., September 1990; “Design History
Knowledge Representation and its Basic Computer Implementation”,
Proceedings of the Design Theory and Methodology Conference, DTM 90,
ASME DE, vol. 27: 175-184.
Chen, W., 1995. A Robust Concept Exploration Method for Configuring Complex
Systems, Ann Arbor, Mich., PhD Thesis, UMI Dissertation Services.
Cirrus, S., 1998; Discoveries of Design Methodologies for the Integration of Multi-
disciplinary Design Problems, Worcester Polytechnic Institute, PhD Thesis.
Clark, K. B., 1989; “Project Scope and Performance: The Effect of Parts Strategy
and Supplier Involvement on Product Development”, Management Science
32: 1247-1263
Clausing, D., 1994; Total Quality Development: A Step-by-Step Guide to World-
Class Concurrent Engineering, ASME Press.
Conte, S. D., Dunsmore, H. E. and Shen, V. Y., 1986; Software Engineering Metrics
and Models, Menlo Park: The Benjamin/Cummings Publishing Company.

5. 211
Cook, H. E. and Wu, A., 2001; “On The Valuation of Goods and Selection of the
Best Design Alternative”, Res Eng Design 13: 42-54.
Cooper, R. G. and Kleinschmidt, E. J., 1996; “Winning Businesses in Product
Development: The Critical Success Factors”, Research and Technology
Management Journal 39: 18-38.
Cooper, R. G., 1995; “Developing New Products on Time, in Time”, Research and
Technology Management Journal 38: 49-57.
Cooper, R. G., 1993; Winning at New Products: Accelerating the Process from Idea
to Launch, Wokingham: Addison Wesley.
Cote, V., Bourque, S., Oligny, S. and Rivard, N., 1988; “Software Metrics: An
Overview of Recent Results”, The Journal of Systems and Software 8: 121-131
Crabbe, A., 2001; Expert Systems and the Emergence of Teledesign, Elsevier
Science Ltd.
Cross, N., 2001; Engineering Design Methods: Strategies for Product Design (3nd
ed), New York: John Wiley & Sons.
Cross, N., 1994; Engineering Design Methods, 2nd
ed., Wiley N.Y.
Cross, N. and Roozenburg, N., 1992. “Modeling the design process in engineering
and in architecture”. Journal of Engineering Design 3: 325-337.
Culley, S. J., Boston, O. P. and McMahon, C. A., 1999. “Suppliers in New Product
Development: Their Information and Integration”,. Journal of Engineering
Design 10: 59-75.
Cunningham, D. P., 1998; Supporting the Bottom-Up Evolution of the Engineering
Design Process, Carnegie Mellon University, PhD Thesis.
Dasgupta, S., 1996; Technology and Creativity, New York: Oxford University Press.
Dasgupta, S., 1994; Creativity in Invention and Design: Computational and
Cognitive Explorations of Technological Originality, Cambridge (England);
New York: Cambridge University Press.
Dasgupta, S., 1991; Design Theory and Computer Science: Processes and
Methodology of Computer Systems Design, Cambridge (England); New York:
Cambridge University Press.

6. 212
Dieter, G. E., 2000; Engineering Design, 3rd
Ed, McGraw Hill, N.Y.
Deb, K., 2001; Multi-Objective Optimization using Evolutionary Algorithms,
Wiley, New York.
Demarco, T., 1982; Controlling Software Projects, New York: Yourdon Press.
Dhillon, B. S., 1998; Advanced Design Concepts for Engineers, Lancaster, PA:
Technomic Pub. Co.
Dixon, J. R. et al, July 31-August 3, 1988; “A proposed Taxonomy of Mechanical
Design Problem”, ASME 1988 International Computers in Engineering
Conference, San Francisco, CA: 41-46
Dixon, J. R., 1987; “On Research Methodology Towards a Scientific Theory of
Engineering Design”, AI EDAM Journal vol. 1, no. 3: 145-157.
Dixon, J. R. and Simmons, M. K., 1984; “An Architecture for Application of
Artificial Intelligence to Design”, in 21st
Design Automation Conference, IEEE
paper no. 40.2, pp 634 – 640.
Dixon, L. A., 1997. An Anchoring and Adjustment Strategy for Re-design. Georgia
Institute of Technology: Ph.D. Dissertation, School of Mechanical Engineering.
Dixon, L. A., 1995. Anchoring and Adjustment Design Strategy Applied to Nano-
technology Instruments, University of London, UK: ICID Thesis, Department
of Chemical Engineering, Imperial College of Science, Technology and
Medicine.
Dixon, L. A. and Colton, J. S., 18-22 August 1996; “Anchoring and Adjustment
Design: A User-Centered Design Strategy”, Proceedings of the ASME Design
Engineering Technical Conferences and Computers in Engineering Conference,
Irvine, CA.
Dorner, D., Ehrlenspiel, K., Eisentraut, R. and Gunther, J., 1995. “Empirical
Investigation of Representations in Conceptual and Embodiment Design”,
WDK 23 - Proceedings of the International Conference in Engineering Design,
Praha: 631-637. Zurich: Heurista.
Duffy, A. H. B. and Andreasen, M. M., 1995. “Enhancing the Evolution of Design
Science”. Proceedings of ICED '95: 29ff. Zurich: Heurista.
Dwarakanath, S. and Wallace, K. M., 1995; “Decision-making in Engineering
Design: Observations from Design Experiments”, Journal of Engineering
Design 6: 191-206.

7. 213
Dym, C. L., 1994; Engineering Design: a Synthesis of Views, Cambridge (England);
New York: Cambridge University Press.
Eastman, C., McCracken, W. M. and Newstetter, W. C., (Edtrs.) 2001; Design
Knowing and Learning: Cognition in Design Education, Elsevier science
Eder, W. E., 1998; “Konstruieren aus der Sicht eines Konstruktionswissenschaftlers
(Designing from the Viewpoint of a Design Scientist)”. In: Banse, G.
Freidrich, K. (Eds) Konstruieren im Spannungsfeld von Kunst und
Wissenschaft (Designing in the Tension Field between Art and Science).
Cottbus, Germany: Technische Universitat Cottbus.
Eder, W.E., 1998; “Design Modeling - a Design Science Approach (and why does
industry not use it?)”, Journal of Engineering Design 9: 355-371
Eder, W. E. (Ed.), 1996; WDK24--Proceedings of Engineering Design and
Creativity Workshop, Zurich: Heurista.
Eder, W. E., 1994; “Developments in Education For Engineering Design - Some
Results of 15 Years of WDK Activity in the Context of Design Research”,
Journal of Engineering Design 5: 135-144.
Eekels, J. and Poelman, W. A., 1998; “Industriale Productontwikkeling”, Dl 1
Basiskennis. Utrecht: Lemma: 350ff.
Eekels, J., 1995; “Values, Objectivity and Subjectivity in Science and Engineering”,
Journal of Engineering Design 6: 173-189.
Eekels, J., 1994; "The Engineer as Designer and as a Morally Responsible
Individual", Journal of Engineering Design 5: 7-23.
Eekels, J., 1985; “The Decision Structure in the Management of Multidisciplinary
Design Projects”, Proceedings of ICED '85: 44ff. Zurich: Heurista.
El-Haik, B. and Yang, K., 1999; “The Components of Complexity in Engineering
Design”, HE Transactions no. 31: 925-934.
Elmaghraby, S. E. and Herroelen, W. A., 1980; “On the Measurement of Complexity
in Activity Networks”, European Journal of Operational Research 5: 223-234.
Eodice, M. T., 2000; A Theory of Requirements Definition in Engineering Design,
Stanford University, PhD Thesis.
Erdman, A. G., Sandor, G. N. and Kota, S., 2001; Mechanism Design, Analysis and
Synthesis, Vol 1, Prentice Hall, New Jersey.

8. 214
Evbuomwan, N., Jebb, A. and Sivaloganathan, S., 1996; “A Survey of Design
Philosophies, Models, Methods and Systems”, Journal of Engineering
Manufacture Proceedings Part B 210: 301-320.
Faires, V. M., 1965; Design of Machine Elements (4th
ed.), Macmillan.
Farag, M. M., 1989; Selection of Materials and Manufacturing Processes for
Engineering Design, New York: Prentice Hall.
Feilden, G. B. R., 1963; Engineering Design: Report of Royal Commission, London:
HMSO.
Fenton, N. E., 1991; Software Metrics: A Rigorous Approach, London: Chapman &
Hall.
Fey, V. R., 1998; Theory of Inventive Problem Solving, Cambridge, MA: Workshop
materials from a TRIZ Workshop at MIT.
Fey, V. R., Rivin, E. I., and Vertkin, I. M., 1994; “Application of the Theory of
Inventive Problem Solving to Design and Manufacturing Systems”, Annals
of the CIRP no. 43: 107-110.
Finger, S and Dixon, J. R., 1989; "A Review of Research in Mechanical Engineering
Design. Part I: Descriptive, Prescriptive and Computer Based Models of
Design Process", Research in Engineering Design vol. 1: 51-68.
Finger, S. and Dixon, J. R., 1989; "A review of Research in Mechanical Engineering
Design. Part II: Representation, Analysis and Design for the Life Cycle",
Research in Engineering Design vol. 1.
French, M., 1998; Conceptual Design for Engineers (3rd
Ed), London; New York:
Springer-Verlag.
French, M. J., 1994; Invention and Evolution: Design in Nature and Engineering
(2nd
Ed),. Cambridge; New York: Cambridge University Press
Fricke, G. and Pahl, G., 1991; “Zusammenhang zwischen personenbedingtem
Vorgehen und Lösungsgüte (Relationship Between Personally Conditioned
Procedure and Quality of Solution)”, WDK 20--Proceedings of the
International Conference on Engineering Design, Zurich: 331-341. Zurich:
Heurista.
Frost, R. B., 1994; “A Suggested Taxonomy for Engineering Design Problems”,
Journal of Engineering Design 5: 399-410.

9. 215
Fulcher, A. J. and Hills, P., 1996; “Towards a Strategic Framework for Design
Research”, Journal of Engineering Design 7: 183-194.
Goel, A., 1997; Design, Analogy and Creativity, intended for IEEE publication:
Expert special edition on AI in Design.
Gomory, R. E., 1989; “Ladder of Science to the Product Development Cycle”,
Harvard Business Review 68: 99-105.
Gregory, I. C. and Rawling, S. B., 1997; Profit From Time, London: Macmillan
Business.
Griffin, A., 1993; “Metrics for Measuring Product Development Cycle Time”,
Journal of Product Innovation Management 10: 112-125.
Goker, M. H. and Birkhoffer, H., 1995; Incorporating Experience in the
Methodological Design Process, ICED, 1995, Prague.
Gruber, T. and Russell, D., February 1993; “Generative Design Rationale: Beyond
the Record and Replay Paradigm”, KSL 92-59.
Gunther, J. and Ehrlenspiel, K., 1998; “How do Designers Practice Design?” In:
Frankenberger, E., Badke-Schaub, P. and Birkhofer, H. (Eds) Designers: The
Key to Successful Product Development: 85-97. Berlin/Heidelberg: Springer-
Verlag.
Hacker, W., Lindemann, U., Pache, M., Romer, A. and Weibhahn, G., 2001; Effort-
saving Product Representations in Design - Results of a Questionnaire
Survey, Elsevier Science Ltd.
Hamrock, B. J., Jakobson, B. O. and Schmit, S. R., 1999; Fundamentals of Machine
Elements, McGraw Hill, New York.
Hales, C., 1993; Managing Engineering Design, Harlow: Longman Scientific &
Technical.
Hales, C., 1987; Analysis of the Engineering Design Process in an Industrial
Context, Cambridge: Grants-Hill.
Hayes, R. H., Wheelwright, S. C., and Clark, K. B., 1988; Dynamic Manufacturing:
Creating the Learning Organization, New York: The Free Press.
Herbert, D., 1987; “Study Drawings in Architectural Design: Applications for CAD
systems”, Proceedings of the Workshop of the Association for Computer-Aided
Design in Architecture (ACADIA).

10. 216
Hogarth, R., 1987; Judgment and Choice: The Psychology of Decision, New York:
John Wiley & Sons.
Hollins, W. and Pugh, S., 1990; Successful Product Design, London: Butterworths.
Holmes, C. J. and Yazdani, B., 21-23 April 1998; “The Role of Staged Data Release
in a Concurrent Engineering Environment”, Proceedings of the 2nd
International Symposium on Tools and Methods for Concurrent Engineering,
Manchester Metropolitan University, UK.
Holmes, C. J., 1998; The Product Introduction Process, Warwick University,
Coventry, UK: EngDoc submission.
Holmes, C. J., 8-10 October 1997; “The Development and Implementation of a New
Product Introduction Process in the Aerospace Industry”, Proceedings of
the 4th International Conference on Concurrent Enterprising, Nottingham, UK:
475-484.
Horton, G.I. and Radcliffe, D.F., 1995; “Nature of Rapid Proof-of-Concept
Prototyping”, Journal of Engineering Design 6: 3-16
Hosnedl, S., Borusikova, I. and Wilheml, W., 1997; “TQM Methods from the Point of
View of Design Science”, WDK 25: Proceedings of the International
Conference on Engineering Design, Tampere, Vol. 1: 391-394. Zurich: Heurista.
Hoult, D. and Meador, L., 1996; “Predicting Product Manufacturing Costs from
Design Attributes: A Complexity Theory Approach”, SAE Value Based
Decision Making SP-1185: 27-36.
Hubka, V., 1988; Theory of Technical Systems: A Total Concept Theory for
Engineering Design, New York: Springer-Verlag.
Hubka, V., 1982; Principles of Engineering Design, London: Butterworth Scientific.
Hubka, V., 1976;. Theorie der Konstruktionsprozesse (Theory of Design Processes),
Berlin: Springer-Verlag.
Hubka, V. and Eder, W. E., 1998; “Theoretical Approach in Design Methodology”,
In: Frankenberger, E., Badke-Schaub, P. and Birkhfer, H. (Eds), Designers: the
Key to Successful Product Development: 12-28. Berlin/Heidelberg: Springer-
Verlag.
Hubka, V. and Eder, E. R., 1996; Design Science: Introduction to the Needs, Scope
and Organization of Engineering Design Knowledge, London: Springer-
Verlag.

11. 217
Hubka, V. and Eder, W. E., 1992; Einführung in die Konstruktionswissenschaft,
Berlin: Springer-Verlag.
Hubka, V. and Eder, W. E., 1992; Engineering Design, Zurich: Heurista.
Hubka, V., Andreasen, M. M. and Eder, W. E., 1988; Practical Studies in Systematic
Design, London: Butterworths.
Hundal, M. S., 1997; Systematic Mechanical Designing: a Cost and Management
Perspective, New York: ASME Press.
Hwang, T. S. and Ullman, D. G., 1990; “The Design Capture System: Capturing
Back-of-the-Envelope Sketches”, Journal of Engineering Design vol. 1, no. 4:
339-353.
Hyman, B., 2003; Fundamentals of Engineering Design (2nd
ed.), Prentice Hall, New
Jersey.
Ilies, H. T., 2000; On Shaping Moving Mechanical Parts, PhD Thesis, University of
Wisconsin-Madison USA.
Jensen, J. J., 23-25 June 1997; “State of the Art Report on Design with Computers”,
Proceedings of IMDC '97: International Marine Design Conference, Newcastle
upon Tyne.
Jones, C., 1986; Programming Productivity, New York: McGraw-Hill Book
Company.
Juvinall, R. C. and Marshek, K. M., 2000; Fundamentals of Machine Component
Design (3rd
ed.), Wiley, New York.
Kannapan, S. M., 1995; “Function Metrics for Engineered Devices”, Applied,
Artificial Intelligence 9: 45-64.
Khadilkar, D. V. and Stauffer, L. A., 1996; “An Experimental Evaluation of Design
Information Reuse During Conceptual Design”, Journal of Engineering
Design 7: 331-339.
Kuhn, T. S., 1969; The Structure of Scientific Revolutions, 2nd
ed., University of
Chicago Press.
King, M. G., 18-21 March 1996; “Integrating DFM into the Vehicle Development
Process at Cadillac/Luxury Car Division”, Proceedings of the National
Design Engineering Conference, Chicago.

12. 218
Klaus, G., 1965; Kybernetik in Philosophischer Sicht (Cybernetics in Philosophical
View) (4th
ed), Berlin: Dietz Verlag.
Koch, P. N., 2000; Hierarchical Modeling and Robust Synthesis for the Preliminary
Design of Large-scale Complex Systems, PhD Thesis, Ann Arbor, Mich.: UMI
Dissertation Services.
Koen, B. V., 1985; Definition of the Engineering Method, Washington, DC: ASEE.
Konda, S., Monarch, I., Sargent, P. and Subrahmanian, E., 1991; Shared Memory in
Design: A Unifying Theme for Research and Practice, Carnegie Mellon
University, see website of P.M. Sargent.
Kosslyn, S. M., 1994; Image and Brain, Cambridge, Mass.: MIT Press.
Kosslyn, S. M., 1983; Ghosts in the Minds Machine, W. W. Norton Co.
Kosslyn, S. M., 1980; Image and Mind, Cambridge, Mass.: Harvard University Press.
Kosslyn, S. M., Brunn, J., Cave, K. R. and Wallach, R. W., 1985; “Individual
Differences in Mental Imagery Ability: A Computational Analysis”, In:
Pinker, S. (Ed). Visual Cognition. Cambridge MA: Bradford Book, MIT Press.
Chapter 5: 195-243.
Kota, S. and Ward, A. C., 1990; “Functions, Structures, and Constraints in
Conceptual Design”, Proceedings of the 2nd International Conference on
Design Theory and Methodology, Chicago, IL: 239-250.
Kroll, E., Condoor, S. S. and Jansson, D. G., 2001; Innovative Conceptual Design-
Theory and Application of Parameter Analysis, Cambridge University Press.
Kuffner, T. and Ullman, D. G., January 1991; “The Information Requests of
Mechanical Design Engineers”, Design Studies vol. 12, no.1: 42-50.
Kuhn, T. S., 1977; The Essential Tension: Selected Studies in Scientific Tradition
and Change, Chicago, IL: University of Chicago Press.
Kuhn, T. S., 1970; The Structure of Scientific Revolutions (2nd
ed), Chicago, IL:
University of Chicago Press.
Kurr, T., 1998; Synthesis of the Principle-based and Other Product Development
Approaches with Emphasis on Concept Generation and Evaluation,
Aachen, RWTH-Aachen in the WZL: Diploma Thesis of cand.-Ing.
Kusiak, A., 1999; Engineering Design: Products, Processes, and Systems, San Diego,
Calif., London: Academic.

13. 219
Kusiak, A. and Szczerbicki, E., 1992; “A Formal Approach to Specifications in
Conceptual Design”, Journal of Mechanical Design 114: 659- 666.
Lakin, F., Baya, V., Cannon, D. Brereton, M., Leifer, L. and Toye, G., 1992; “Mapping
Design Information”, AAAI 92 Workshop.
Lee, J., 1992; “Summary Report of AAAI ’92 Workshop on Design Rationale”,
Concurrent Engineering Research in Review, Autumn, vol. 4, Concurrent
Engineering Research Centre, UNA: 29-32.
Leverton, T. A., 1998; Choice of Engineering Design Methodology at Rover Body
and Pressings, University of Warwick, UK: EngDoc submission no. 5.
Lewis, J. et al, 29-31 August 1994; "The Concurrent Engineering Toolkit: A
Network Agent for Manufacturing Cycle Time Reduction", CE-94:
International Conference on Concurrent Engineering, Pittsburgh, PA: 521-527.
Liker, J. K., Fleischer, M. and Arnsdorf, D., 1992; “Fulfilling the Promises of CAD”,
Sloan Management Review, Spring: 74-86.
Luczak et al, 1991; “Frictions and Frustrations in Creative-Informatory Work with
Computer Aided Design – CAD Systems”, Human Aspects in Computing,
Elsevier: 175-179.
Maffin, D., 1996; Engineering Design and Product Development in a Company
Context, University of Newcastle, Newcastle upon Tyne: Ph.D. Thesis.
Maffin, D., Alderman, N., Braiden, P., Hills, W. and Thwaites, A., 1995; “Company
Classification: A New Perspective on Modeling the Engineering Design and
Product Development Process”, Journal of Engineering Design 6: 275-289.
Maffin, D., Thwaites, A., Alderman, N., Braiden, P. and Hills, W., 1997; “Managing
the Product Development Process: Combining Best Practice with Company
and Project Contexts”, Technology Analysis & Strategic Management 9: 53-
74.
Maier, J. R. A., Mistree, F. and Simpson, T. W., 2001; “Product Platform Design:
Method and Application”, Research in Engineering Design 13: 2-22.
Manly, B. J., 1994. Multivariate Statistical Methods: A Primer. London: Chapman
and Hall.
Manske, F. and Wolf, H., 1989; “Design Work in Change: Social Conditions and
Results Of CAD Use in Mechanical Engineering”, IEEE Transactions on
Engineering Management, vol. 36, no. 4: 282-292.

14. 220
Matthews, C., 1998; Case Studies in Engineering Design, London: Arnold; New
York: John Wiley.
McGrath, M. E., Anthony, M. T. and Shapiro, A. R., 1992; Product Development:
Success through Product and Cycle-time Excellence, Boston, MA:
Butterworth-Heinemann.
McMahon, C. and Brown, J., 1993; CADCAM from Principles to Practice, Addison
Wesley, England.
McVea, W. M., 1995; KADS (2): A Knowledge-aided Design System for Mechanical
Transmissions, PhD Thesis, Purdue University
Meyer, C., 1993; Fast Cycle Time. How to Align Purpose, Strategy and Structure
for Speed, New York: The Free Press.
Miles, L. D., 1961; Techniques of Value Analysis and Engineering, New York:
McGraw-Hill Book Company.
Mills, J. J., 1993; "A Taxonomy of the Product Realization Process", Research in
Engineering Design vol. 4: 203-213.
Millson, M. R., Raj, S. P. and Wilemon, D., 1992; “A Survey of Major Approaches
for Accelerating New Product Development”, Journal of Product Innovation
Management 9: 53-69.
Monplaisir, L. and Singh, N., (Edtrs), 2002; Collaborative Engineering for Product
Design and Developmet, American Scientific Publishers, California.
Muller, J., 1994; “Akzeptanzprobleme in der Industrie, ihre Ursachen und Wege zu
ihrer Überwindung (Acceptability problems in industry, their causes and
ways to overcome them)”, In: Pahl, G. (Ed.). Psychologische und
Padagogische Fragen beim Methodischen Konstruieren--Ladenburger
Diskurs: pp. 247-266. K61n, Verlag TUV Rheinland.
Muller, J., 1991. “Akzeptanzbarrieren als berechtigte und ernst zu nehmende
Notwehr kreativer Konstrukteure--nicht immer nur böser Wille,
Denktragheit oder alter Zopf (Acceptance barriers as justified and serious
defence reaction of creative designers--not always ill will, thinking inertia or
old hat)”. In: Hubka, V. (Ed.). WDK 20: Proceedings of ICED 91: pp. 769-776.
Zurich: Heurista.
Murmann, P. A., 1994; “Expected Development Time Reductions in the German
Mechanical Engineering Industry”, Journal of Product Innovation
Management 11: 236-252.

15. 221
Nam, T. J. and Wright, D., 2001; The Development and Evaluation of Sycro 3D: A
Real-Time Collaborative 3D CAD System, Elsevier Science Ltd.
Navinchandra, D., 1991; Exploration and Innovation in Design: Towards a
Computational Model, New York: Springer-Verlag.
Netten, B. D. and Vingerhoeds, R. A., 1996; Incremental Adaptation for Conceptual
design, 12th
European Conference on Artificial Intelligence.
Nevins, J. L. and Whitney, D. E. (eds), 1989; Concurrent Design of Products and
Processes, New York: McGraw-Hill.
Nishisato, S., 1980; Analysis of Categorical Data: Dual Scaling and its Applications,
Toronto: University of Toronto Press.
Norden, P. V., 1964; Manpower Utilization Patterns in Research and Development
Project, Columbia University: Ph.D. Dissertation.
Nordlund, M., 1996; An Information Framework for Engineering Design based on
Axiomatic Design, The Royal Institute of Technology, Stockholm: Ph.D.
Thesis.
Norris, K. P., 1971; “The Accuracy of Project Cost and Duration Estimates in
Industrial R&D”, R&D Management 2: 25-36.
Norton, R. L., 2000; Machine Design, an Integrated Approach, 2nd
ed., Prentice Hall,
New Jersey.
Onwubiko, C., 2000; Introduction to Engineering Design Optimization, Prentice
hall, New Jersey.
O'Shaughnessy, K. and Sturges, R. H., 1992; “A Systematic Approach to Conceptual
Engineering Design”, Design Theory and Methodology 42: 283-291.
Ottosson, S., 1996; “Dynamics of Product Development: Findings from
Participating Action Research in a Fast New Product Development
Process”, Journal of Engineering Design 7: 151-169.
Otto, K. N. and Wood, K. L., 2001; Product Design, techniques in Reverse
Engineering and New Product Development, Prentice Hall, New Jersey.
Pahl, G., 1995; “Transfer Ability as Educational Goal”, WDK 23--Proceedings of the
International Conference on Engineering Design 1995, Praha: 247-252. Zurich:
Heurista.

16. 222
Pahl, G. and Beitz, W., 1996. Engineering Design: A Systematic Approach (revised
2nd
ed), London: Springer-Verlag.
Pahl, G. and Beitz, W., 1995; Engineering Design (2nd
ed), Translated and edited by
Bauert, F., Blessing, L. and Wallace, K. M. London: Springer-Verlag.
Pahl, G. and Beitz, W., 1993; Konstruktionslehre (3rd
ed), Berlin/Heidelberg:
Springer-Verlag.
Pahl, G. and Beitz, W. (Ed K. Wallace), 1988; Engineering Design: A Systematic
Approach, Design Council, London, UK.
Pejtersen, A. M., Sonnenwald, D. H., Buur, J., Govindaraj, T. and Vicente, K., 1997;
“The Design Explorer Project: Using a Cognitive Framework to Support
Knowledge Exploration”, Journal of Engineering Design 8: 289-301.
Petroski, H., 1996; Invention by Design: How Engineers Get from Thought to
Thing, Cambridge, Mass, Harvard University Press.
Petroski, H., 1994; Design Paradigms: Case Histories of Error and Judgment in
Engineering, New York: Cambridge University Press.
Petroski, H., 1992; The Evolution of Useful Things, New York: Alfred A. Knopf,
London.
Prasad, B., 1996; Concurrent Engineering Fundamentals: Integrated Product and
Process Organisation (Vol 1), Englewood Cliffs, NJ: Prentice Hall.
Proceedings of the International Conference of Engineering Design (ICED). WDK
Series No. 22, Zurich, 1993.
Pugh, S., 1996; Creating Innovative Products using Total Design, edited by
Clausing, B. and Andrade, R., Addison Wesley, N.Y.
Pugh, S., 1990; Total Design: Integrated Methods for Successful Product
Engineering, Wokingham: Addison-Wesley.
Pugh, S., 1986; “Design Activity Models: Worldwide Emergence and
Convergence”, Design Studies 7: 167-173.
Purvis, L., 1999; A CBR Integration from Inception to Productionization, Xzerox
Corporation, New York,
Rechtin, E., 1991; Systems Architecting: Creating & Building Complex Systems,
Englewood Cliffs, NJ: Prentice-Hall.

17. 223
Research Project Status Reports, June 1994; EPSRC: 1-202.
Rong, R., 1995; Toward the Paradigm of a Knowledge Based Electromagnetic
Design System: A Case-Based Reasoning Approach, Canada: McGill
University, PhD Thesis.
Roozenburg, N. F. M. and Eekels, J., 1995; Product Design, Fundamentals and
Methods, Chichester: Wiley.
Rudolph, S., 1995; A Methodology for the Systematic Evaluation of Design Objects,
Stuttgart University, Dr.-Ing. Thesis.
Savransky, S. D., 2000; Engineering of Creativity: Introduction to TRIZ
Methodology of Inventive Problem Solving, Boca Raton, Fla.: CRC Press.
Schon, D. A., 1983; The Reflective Practitioner: How Professionals Think in
Action, New York: Basic Books.
Sheldon, D., August 19-21, 1997; “Does Industry Understand and Adopt Design
Science and Tools?”, Unpublished paper presented at the International
Conference on Engineering Design 1997, Tampere.
Shigley, J. E. and Mische, C. R., 1996; Mechanical Engineering Design, (5th ed.),
McGraw Hill, New York.
Shillito, M. L. and De Marle, D. J., 1992; Value: Its Measurement, Design, and
Management,. New York: John Wiley & Sons.
Shooter, S. B., 1995; Information Modeling in Mechanical Design: With
Application to CAM Mechanism Design, Ann Arbor, Mich.: UMI, PhD Thesis
Siegel, S. and Castellan, N. J., 1988; Nonparametric Statistics for the Behavioral
Sciences, New York: McGraw-Hill Book Company.
Simon, H. A., 1969; The Science of the Artificial, Cambridge, MA, MIT Press.
Sivaloganathan, S. and Andrews, P. T. J. (eds.), 2000; Engineering Design Conference
2000: Design for Excellence, Bury St Edmunds: Professional Engineering
Publications.
Smith, P. G. and Reinertsen, D. G., 1991; Developing Products in Half the Time, New
York: Van Nostrand Reinhold.
Smyth, B. and Keane, M. T., 1995; Experiments on Adaptation Guided Retrieval in
Case-Based Design, Dublin University.

18. 224
Simina, M. and Kolodner, J., 1996; Creative Design: Reasoning and Understanding,
Georgia Institute of Technology, Atlanta.
Sobek II, D. K., 1997; Principles that Shape Product Development Systems: a
Toyota-Chrysler Comparison, University of Michigan: PhD dissertation.
Sokai, R. R. and Sneath, P. H. A., 1973; Numerical Taxonomy: The Principles and
Practice of Numerical Classification, San Francisco: Freeman.
Sokai, R. R. and Sneath, P. H. A., 1963; Principles of Numerical Taxonomy, San
Francisco: Freeman.
Stalk, G. and Hoot, T., 1990; Competing Against Time. How Time Based
Competition is Reshaping Global Markets, New York: The Free Press.
Spotts,M. F., and Shoup, T. E., 1998; Design of Machine Elements (7th
ed.), Prentice
Hall, New Jersey.
Steier, D., 1990; "Creating a Scientific Community at the Interface Between
Engineering Design and AI", AI Magazine vol. 11 (Winter): 18-23.
Steward, D. V., 1993; Using the Design Structure Method: NSF Report, Washington,
DC: NSF.
Suh, N., 2000; Axiomatic Design: Advances and Applications, New York: Oxford
University Press.
Suh, N., 1995; “Axiomatic Design of Mechanical Systems”, ASME 50th Anniversary
Design Issue: Journal of Mechanical Design and Journal of Vibration and
Acoustics no. 117: 2-10.
Suh, N., 1990; The Principles of Design, New York: Oxford University Press.
Suh, N., Bell, A. C. and Gossard, D. C., 1978; “On an axiomatic approach to
manufacturing systems”, Journal of Engineering for Industry: Transactions of
ASME no. 100: 127-130.
Swift, K. G., Raines, M. and Booker, J. D., 1999; “Analysis of Product Capability at
the Design Stage”, Journal of Engineering Design 10: 77-91.
Tate, D. and Nordlund, M., 1995; “Synergies between American and European
Approaches to Design”, Proceedings of the First World Conference on
Integrated Design and Process Technology, Austin, TX, IDPT-Vol. 1, Society for
Design and Process Science: 103-111.

19. 225
Terpenny, J. P., 1997; A Methodology and Supporting Framework for Functional
Modeling and Configuration in Conceptual Design, Ann Arbor, Mich.: UMI
Dissertation Services, PhD Thesis.
Thompson, D. E., 1999; Design Analysis: Mathematical Modeling of Nonlinear
Systems, Cambridge; New York: Cambridge University Press.
Tong, C. and Sriram, D. (eds.), 1992, Artificial Intelligence in Engineering Design,
Boston Academic Press.
Tversky, A. and Kahneman, D., 1974; “Judgment under Uncertainty: Heuristics and
Biases”, Science 185: 1124-1131.
Ullman, D. G., 2003; The Mechanical Design Process, 3rd
ed., McGraw Hill, New
York.
Ullman, D. G., 2002; Toward the Ideal Mechanical Engineering Design Support
System, Research in Engineering Design, 13, pp 55-64
Ullman, D. G., 2001; Robust Decision Making for Engineering Design, Journal of
Engineering design, vol. 12 no. 1 pp. 3-13.
Ullman, D. G., et al., 1997; What to do Next: Using the Problem Status to
Determine the Course of Action, Research in Engineering Design, 9, pp 214-
227.
Ullman, D. G., 1995; A Taxonomy for Classifying Engineering Decision Problems
and Support Systems, Artificial Intelligence for Engineering Design, Analysis
and Manufacturing, no. 9, pp. 427-438.
Ullman, D. G., 1992; The Mechanical Design Process, McGraw Hill, New York.
Ullman, D. G., Dietterich, T. G., and Stauffer, L. A. 1992; “A Taxonomy for
Mechanical Design”, Research in Engineering Design vol. 3: 179-189.
Ullman, D. G., Dietterich, T. G. and Stauffer, L. A., 1988; "A Model of the
Mechanical Design Process Based on Empirical Data", AI EDAM Journal
vol. 2, no. 1: 33-52.
Ulrich, K. T. and Eppinger, S. D., 2000; Product Design and Development, 2nd
ed.,
McGraw Hill, New York.
Ulrich, K. T., Satorius, D., Pearson, S. and Jakiela, M., 1993; “Including the Value of
Time in Design for Manufacturing Decision Making”, Management Science
39: 429-447.

20. 226
Usher, M. J., 1984; Information Theory for Information Technologists, London:
Macmillan.
Voigt, E. C. (Ed.), 1996; Product Design Review: A Method for Error-free Product
Development, Portland, Or.: Productivity Press.
Wallace, K. M. (Ed., Translator), 1987; VDI Guideline 2221: Systematic Approach to
the Design of Technical Systems and Products, Dusseldorf: VDI.
Wang, C. M., Lee, K. H. and Ang, K. K., (Edtrs), 1999; Computational mechanics for
the Next Millenium, Geomechanics, Models and Techniques, Vol 2,
Elsevier.
Wankel, Felix. (translated by Ansdale, R. F.), 1963; Rotary Piston Machines,
Classification of Design Principles for Engines, Pumps and Compressors,
Iliffe Books Ltd, London.
Ward, A. C., Liker, J. K., Cristiano, J. J. and Sobek II, D. K., 1995; “The Second
Toyota Paradox: how Delaying Decisions can Make Better Cars Faster”,
Sloan Management Review 36: 43-61.
Wilding, R. D. and Yazdani, B., 1997; “Concurrent Engineering in the Supply
Chain, Logistics Focus”, The Journal of the Institute of Logistics 5: 16-22.
Wills, L. M. and Kolodner, J. L., 1994; Towards More Creative Case-Based Design
Systems, Proceedings of AAAI, Seatle.
Wright, I. C., 1998; Design Methods in Engineering and Product Design, McGraw
Hill, London.
Yazdani, B. and Holmes, C., 1999. “Four Models of Design Definition: Sequential,
Design Centered, Concurrent and Dynamic”, Journal of Engineering Design
10: 25-37.
Yazdani, B., October 1997; “Models of Concurrent Process Design and
Development in the Automotive Industry”, Proceedings of the 4th
International Conference on Concurrent Enterprising, ICE '97, Nottingham,
UK: 99-107.
Yazdani, B., August 1996; “Demystification of Concurrent Engineering”,
Proceedings of the Twelfth International Conference on CAD/CAM Robotics
and Factories of the Future, London: 981-987.
Yazdani, B., September 1995; “Time to Body Tools - A Case Study of Time
Compression in Product Development in Rover Body and Pressings”,
Proceedings of the Time Compression Conference, Birmingham, UK.

21. 227
Young, W. C., 1989; Roark’s Formulas for Stress and Strain (6th
ed.), McGraw Hill,
New York.
Zarli, A., Amar, V., Diard, F., Marache, M. and Poyet, P., 8-10 October 1997;
“Bridging the Gap Between STEP, CORBA and Virtual Reality Technology
for the Next Building Industry Applications Generation”, Proceedings of the
4th International Conference on Concurrent Enterprising, Nottingham, UK:
219-229.
Zha, X.F., Du, H.J. and Qiu, J.H., 2000a; Knowledge-based approach and system for
assembly oriented design, Part I: the approach, Engineering Applications of
artificial Intelligence 14 (2001) 61-75.
Zha, X.F., Du, H.J. and Qiu, J.H., 2000b; Knowledge-based approach and system for
assembly oriented design, Part II: the system implementation, Engineering
Applications of Artifcial Intelligence 14 (2001) 239–254.
Zhao, W., 1998; Domain Knowledge Transformation (DKT) for Conceptual Design
of Mechanical Systems, Ann Arbor, Mich.: UMI, PhD thesis.
Ziman, J. (ed.), 2000; Technological Innovation as an Evolutionary Process,
Cambridge University Press.
Zuse, H., 1991; Software Complexity: Measures and Methods, Berlin: Walter de
Gruyter.
Zwicky, F., 1971; Discovery, Invention, Research through the Morphological
Approach, Macmillan, Canada.
Zwicky, F., 1966; Launching Process and Apparatus, US Pat. 3,253,511.
Zwicky, F., 1964; Device and Method for Jet Propulsion through a Water Medium,
US Pat. 3,137,994.
Zwicky, F., 1964; Coruscative Ballistic Device, US Pat. 3,135,205.
END

22. 228
B2: Bibliography and References for Pumps, Ground Fluid
Technology, Technology and Relevant History
Three separate bibliographies/references are included. They are: B1, B2 and B3.This
categorization was done because research for the thesis fell into three distinct areas:
B1: Engineering Design Process, Methodology and Science.
B2: Pumps, Ground Fluid Technology, Technology and Relevant History.
B3: Historical Research.
Addison, H., 1959; A Treatise of Applied Hydraulics, Chapman and Hall.
Angoncillo, L. B., 1988; “Renewable Energy Water Pumping Experience in the
Phillipines”, U.S. - ASAEN Conference Comparative Technology Water
Pumping.
Allen, A. D. and Davidson, W. A., 1982; “Review of Groundwater Resources in
Fractured Rocks in Western Australia”, AWRC Conference: Groundwater in
Fractured Rock, Canberra/Geological Survey of Western Australia, Perth.
Alley, W. M., Reilly, T. E. and Franke, O. L., 1999; U.S. Geological Survey Circular
1186: Sustainability of Ground-Water Resources, U.S. DEPARTMENT OF
THE INTERIOR., U.S. GOVERNMENTPRINTING OFFICE.
Andau, M. L., Ngler, A. E., Sachau, J. and Traussand, P. S., 1995; Influence of
Parameter Setting and Dynamics of Irradiance on the Water Output of PV
Pumping Systems, Institut fur Energieverssorgungstechnick (ISET) e.V.,
Kassel, Germany.
Anis, W.R. and Metwally, H.M.B., 1994; "Dynamic Performance of a Directly
Coupled PV Pumping System", Solar Energy, Vol. 53, No. 4, pp. 369-377.
Arlosoroff, S., Grey, D., Journey, W., Karp, A., Langenegger, O., Roche, R. and
Tschannerl, G. 1987; Community Water Supply: The Handpump Option,
The World Bank, Washington, D. C.
Armitage, D. and Ritchey, J., 1980; Low Yield Well Study, National Water Well
Association, Ohio.
Auer, F., 1984; "Wind Powered Water Pumping: Comments on System Design
Illustrated by Examples from Africa", European Wind Energy Conference,
October, pp. 724-729.
Axelson Inc., 1982; Pump and Rod Engineering Manual, Longview, Texas, USA.
Babineaux, J.H., 1989; "Inspection and Quality Control", Proceedings of 6th
International Pump Users Symposium, April, pp.101-106.

23. 229
Ball, P. and Danert, K., 1999a; Hand Sludging, a Report From North West Bengal,
internal report, Cranfield University (UK).
Ball, P. and Danert, K., 1999b; Field Trials of The Prototype Pounder Rig, Uganda,
20th August – 13th November 1999, Cranfield University (UK).
Barrett, J., 1995; “New Industrial Screw Compressor Runs on Water”. Eureka
Technology Transfers, January edition: pp. 28-29.
Barrett, J., 1994; “Novel Seals Shrink Gear Pump Design”, Eureka Transfers
Technology, June edition: pp. 36-37.
Bloos, H., Genthner, M., Heinemann, D., Janssen, A. and Moraes, R., 1996;
“Photovoltaic Pumping Systems: A Comparison of two Concepts”,
EuroSun'96, pp 583 – 588.
Bodmer, G.R., 1889; Hydraulic Motors, Whittaker and Co.
Bohl, W. et al., 1979; “Pumps and Pump Installations”, Kontakt and Stadium, Vol.
27.
Brett, P.N., 1988; “Design Modifications to a Diaphragm Separator Pump with
Self-acting Valves”, in Proceedings of First Bath International Fluid Power
Workshop, Burrows, C. R. and Vaughan, N. D. (eds.), pp. 29-45.
Brett, P.N., 1985; The Performance of Positive Displacement Pumps with Self-
acting Valves, University of Bath, PhD Thesis
Bristol, J.M., 1981; “Diaphragm Metering Pumps”, Chemical Engineering 19: 124-
140.
Brookes, C.A., 1988; “Tribological Application of Ceramic Materials in Water
Hydraulics: Potential and Problems”, in Proceedings of First Bath
International Fluid Power Workshop, Burrows, C. R. and Vaughan, N. D. (eds.),
pp. 15-27.
Brookes, C.A., Fagan, M.J., James, R.D., Kerry, P.R. and McConnachie, J., 1993;
"Water Hydraulic Pumps for a Safer and Cleaner Future", Proceedings of
13th International pump Technical Conference: pp. 23-40.
Brown, K. E., 1980; “The Technology of Artificial Lift methods; (part A:
Introduction to Artificial Lift Systems; Beam Pumping: Design analysis;
Gas Lift)”, Chapter 2 – Beam pumping: design and Analysis.
Burton, J.D. and Pinilla, A.E., 1985; "Water Pumps for Windmills: A Comparison of
two Commercially Available Systems from South America", Wind
Engineering, Vol. 9, No. 1, pp. 50-58.
Butler, E., 1913; Modern Pumping and Hydraulic Machinery, Charles Griffith and
Co, London.

24. 230
Carroll, E., 1986; “Pumps for Stiff and Aggressive Wet Solids”, International
Conference on Positive Displacement Pumps,Paper 81, Chester, England.
Carter, R, C., 2001; Private Sector Participation in Low Cost Water Well Drilling
Knowledge and Research (Kar) Project R7126, Cranfield University (UK).
Carruthers, I,. and Rodriguez, M., 1992; Tools for Agriculture, A Guide to
Appropriate Equipment for Smallholder Farmers, Intermediate Technology
publications.
Chesney, Jr., A.J., 1968; “Water Injection-Pump Development”, Proceedings of
ASME Conference, September Dallas 22-25, Texas.
Cleijne, B. and Smulders, P., 1986; “Valve Motion in Piston Pumps for Water-
Pumping Windmills”, International Conference on Positive Displacement
Pumps, Paper C1, Chester, England.
Collier, S.L., 1983a; “Knocking from Valve Hammer in Triplex Pumps”, Journal of
Energy Resources Technology, Vol. 105, pp. 394-395.
Collier, S.L., 1983b; Mud Pump Handbook, Gulf Publishing Co, Houston, Texas.
Collier, S.L., 1958; “Know your Mud Pump – It can save you money”, World Oil,
pp. 143-146.
Collier, S.L. and Jeffries, R.K., 1983; “Chargers for Better Piston Pump
Performance”, Paper No. 11405 presented at the IADC/SPE Drilling
Conference, New Orleans, Louisiana, USA.
Cox, W.G., 1906, Irrigation With Surface and Subterranean Waters and Land
Drainage, Angus and Robertson, Sydney.
CSF Inox, 1995; Double-Acting Air-Operated Piston Pumps with Adjustable
Delivery, (brochure).
Davis, C.V., 1942, Handbook of Applied Hydraulics, McGraw Hill Book Company
Dettinger, W., 1979; “Sealing Friction and Sealing Leakage”, CAV, booklet 5.
Dillon, M., 1993; “Universal Joint Design in Progressive Cavity Pumps”, World
Pumps, March 1994, pp. 28-35.
Dorey, R.E., 1988; “Modeling of Losses in Pumps and Motors”, in Proceedings of
First Bath International Fluid Power Workshop, Burrows, C. R. and Vaughan,
N. D. (eds.), pp. 71-97.
Douglas, J.F., Gasiorek, J.M. and Swaffield, J.A., 1985; Fluid Mechanics (2nd ed.),
Longman Scientific and Technical, Essex, UK.
Dresser Pump Division, Dresser Industries Inc. 1985; The Monobloc B Range
(brochure), Mono Pumps (Australia).

25. 231
Duffie, J. A. and Beckman, W. A., 1974; Solar Energy Thermal Processes, Wiley,
New York.
Ebsray Pumps., 1985; Liquid Transfer Equipment for Industry, (brochure).
Edge, K.A. and Darling, J., 1988; “A Theoretical Model of Axial Piston Pump Flow
Ripple”, in Proceedings of First Bath International Fluid Power Workshop,
Burrows, C. R. and Vaughan, N. D. (eds.), pp. 113-127.
Engineering Department, Industrial Pump Group, FMC Corporation, 1995; “Low
Pulsation Pump Technology”, World Pumps, pp. 42-45.
Eslinger, J. C., 1989; “Prediction of Fatigue Life of Fracturing Pump Fluid End
Parts”, ASME-ETCE, Paper 89-PET-2.
Etcheverry, B.A., 1915; Irrigation Practice and Engineering, McGraw-Hill Book
Company Inc.
Everitt, T.A. and Jennings, J.W., 1992; "An Improved Finite-Difference Calculation
of Downhole Dynamometer Cards for Sucker-Rod Pumps", SPE Production
Engineering, Feb 1992, pp 121 – 127.
Falkland, A. C., 1984; Assessment of Groundwater Resources on Coral Atolls: Case
Studies of Tarawa and Christmas Island, Republic of Kiribati, Hydrology
and Water Resources Section, Water Supply and Sewerage Division,
Department of Housing and Construction XT Region, Australia.
FMC, 1995; Reciprocating Pump Manual, (brochure).
FMC, 1991; Low Pulsation Pump Technology, World Pumps, Jan 1991, pp 42 – 45.
Forde, L,. 1994; Sustainable Water Resources Management: The Case of Barbados,
Barbados Water Authority.
Fraenkel, P., 1986; Water-Pumping Devices: A Handbook for Users and Choosers,
Part 1. London: Intermediate Technology Publications.
Fraenkel, P., Barlow, R., Crick, F., Derrick, A., and Varis, B. 1993; Windpumps: A
Guide for Development Workers, Intermediate Technology Publications,
London.
Fritsch, H., 1995; “High Pressure Diaphragm Pumps – Tailored to the Individual
Application”, World Pumps, March 1995, pp. 30-33.
Fritsch, H., (trans. Grant, W), 1989; Metering Pumps: Principles, Designs,
Applications, Verlag Moderne Industrie AG and Co., Germany.
Fritsch, H. and Horn, W., 1990; “Sealing Systems for Reciprocating Positive
Displacement Pumps, Manual Seals. Farragallah, C.W.H, Publishing and
pictures archive.

26. 232
Futers, T.C., (2 Vols), 1910, The Mechanical Engineering of Collieries, The Colliery
Guardian Co. Limited.
Gault, R. H., 1987; Designing a Sucker Rod Pumping System for Maximum
Efficiency, Society of Petroleum Engineers.
GEHO Pumps, 1995a; Industrial Slurry and Sludge Pumping, (brochure).
GEHO Pumps, 1995b; The GEHO Piston Diaphragm Pump, (brochure).
Gibbs S.G., 1992; "Design and Diagnosis of Deviated Rod-Pumped Wells", Journal
of Petroleum Technology, Jul 1992, pp. 774-781.
Gibbs, S.G. and Nolan, K. B., 1975; "Computing Gearbox Torque and Motor
Loading for Beam Pumping Units with Consideration of Inertia Effects",
Journal of Petroleum Technology, Nov 1973, pp. 1153-1159.
Gibbs, S.G., 1963; "Predicting the Behaviour of Sucker-Rod Pumping Systems",
Journal of Petroleum Technology, Jul 1963, pp. 769-778.
Gibbs, S.G. and Neely, A.B., 1966; "Computer Diagnosis of Down-Hole Conditions
in Sucker Rod Pumping Wells", Journal of Petroleum Technology, Jan 1966,
pp. 91-98.
Gibbs, S.G. and Nolen, K.B., 1973; "Wellsite Diagnosis of Pumping Problems using
Minicomputers", Journal of Petroleum Technology. Nov 1973, pp.1319-1323.
Gibson, A.H., 1925; Hydraulics and its Applications, Constable and Company Ltd,
Graber, P., 1983; “Solids Handling Pumps: Part 2”, World Pumps, Vol. 198, pp. 83-
88.
Graham, F.D., 1943; Audels Pumps, Theo. Audel & Co.
Guillerme, A.E., 1988; The Age of Water, Texas A & M University Press.
Hall, A. J., 1983; Hydrological Networks on Small Islands, Bureau of Metrology
Melbourne, Australia.
Hanitsch, R. and Kernd'l, S., 1995; PV Powered Eccentric Screw Pump, Technische
Universitat, Berlin.
Harding, S.T., 1917; Operation and Maintenance of Irrigation Systems, McGraw
Hill Book Company.
Harris, R.M., Edge, K.A. and Tilley, D.G., 1994; “The Suction Dynamics of Positive
Displacement Axial Piston Pumps”, Journal of Dynamic Systems,
Measurement, and Control, Vol. 116. pp. 281-287.
Hashimoto, H., Hiyama, H. and Sato, R., 1994; “Development of Prototype Pump
Using a Vibrating Pipe with a Valve”, Journal of Fluids Engineering, Vol.
116, pp. 741-745.

27. 233
Heron, R.A., 1988; “Abrasive Jet Cutting: A Review of a Rapidly Developing
Pumping Application”, in Proceedings of First Bath International Fluid Power
Workshop, Burrows, C. R. and Vaughan, N. D. (eds.), pp 153 – 173.
Henshaw, T. L., 1987; Reciprocating Pumps, Van Nostrand, New York.
Herrmann, B., 1989; Photovoltaisch betriebene Wasserpumpensysteme, Universitat
Stuttgart, Doktor-Ingenieurs, Institut fur Theorie der Elektrotechnik.
Hsiao, Y. R. and Blevins, B. A., 1984; Direct Coupling of Photovoltaic Power Source
to Water Pumping System, Solar energy no. 32 pp 498-498.
Hulsher, W. and Fraenkel, P. 1994; The Power Guide An International Catalogue of
Small-scale Energy Equipment, Intermediate Technology Publications.
Hydraulic Institute-1917, 1983; Hydraulic Institute Standards for Centrifugal,
Rotary and Reciprocating Pumps, (14th ed.).
Ibarra, R.H., 1981; "The Application of Electrical Solar Energy to Irrigation
Pumping", Regional Asia and Pacific Workshop application solar energy in
ag.& p.h.
Ibrahim, O. M., Klein, S. A. and Mitchell, J. W., 1992 "Effects of Irreversibility and
Economics on the Performance of a Heat Engine", Journal of Solar Energy
Engineering, Vol. 114, November, pp 267-271.
Intermediate Technology Publications, 1994; The Power Guide: An International
Catalogue of Small-scale Energy Equipment, Intermediate technology
Publications, London.
Intermediate Technology Publications, 1992; Tools for Agriculture: A Guide to
Appropriate Equipment for Smallholder Farmers (4th ed), Intermediate
technology Publications, London.
Jackson, B., 1995; “Pump Industry Set to Grow”, Engineers Australia, Vol. 54, pp ?.
Kain, A., 1991; “Constant Pressure Control For Energy Efficient Pumping”, World
Pumps, ? 1991, pp. 8-12.
Karassick, I.J., 1986; The Pump Handbook, 2nd
ed., McGraw Hill, New York
Karassik, I.J. and McGuire, J.T., 1998; "An Open Letter to the Pump Industry",
Proceedings of 5th International pump Users Symposium, pp. 129-133.
Khouzam, K., Khouzam, L. and Groumpos, P., 1991; "Optimum Matching of Ohmic
Loads to the Photovoltaic Array", Solar Energy, Vol. 46, No. 2, pp. 101-108.
Kintr, J., 1994; “Progress in the Manufacture of Progressing Cavity Pump Rotors”.
World Pumps, July 1994, pp. 46-50.

28. 234
Knoch, H. and Fundus, M., 1993; "Sintered Silicon Carbide for Slide Bearings and
Seal Rings: Concepts of Product Development for Reliable Performance",
Proceedings of 13th International pump Technical Conference, pp. 381-410.
Koner, P.K., 1995; "Technical Note: Optimization Techniques for a Photovoltaic
Water Pumping System", Renewable Energy, Vol. 6, No. 1, pp. 53-62.
Lea, F.C., 1930; Hydraulics for Engineers and Engineering Students, Edward
Arnold & Co, London.
Lea, J.F. and Bowen, J.F., February 1992; "Dynamic Measurments of Beam-Pump
Parameters", SPE Production Engineering, pp 113-120.
Lea, J.F. and Minissale, J. D., May 18 1992; Beam Pumps Surpass ESP Efficiency,
Oil and Gas Journal, pp 72 - 75
Leake, S. A., Land Subsidence from Ground-Water Pumping. U.S. Geological
Survey:
http://geochange.er.usgs.gov/sw/changes/anthropogenic/subside
Leventon, W., 1994; “Pressure Washer has First Plastic Piston Pump”, Design
News, Vol?
Lewitt, E.H., 1958; Hydraulics and Fluid Mechanics, Sir Isaac Pitman and Sons,
London.
Loewenstein, E.E., Crissey, C.P., 1917; Centrifugal Pumps, Constable and Co.
Maitra, M.K. and Ghose, N.C., 1992; Groundwater Management, Ashish Publishing
House.
Manfreda, G. and Kawambwa, S. J., 1991; “Energy Control for a Flat-Plate
Collector/Rankine Cycle Solar Power System 1”, Journal of Solar Energy
Engineering, Vol. 113, pp 89-93.
Matthews, W., 1835; Hydraulia; An Historical and Descriptive Account of The
Water Works of London and The Contrivances for Supplying other Great
Cities in Different Countries, Simkin Marshall and Co, London.
Mayer, J., 1995; “Selecting a Positive-Displacement Pump in 10 Steps”, World
Pumps, April 1995, pp. 34-38.
McCabe, R.E., Lanckton, P.G. and Dwyer, W.V., 1984; Metering Pump Handbook,
Industrial Press, Inc, New York.
Meyers, K.E., 1989; "Rolling Bearings in Centrifugal Pumps", Proceedings of 6th
International Pump Users Symposim, pp. 91-100.
Miller, J. E., 1998; "Characteristics of the Reciprocating Pump", Proceedings of 5th
International pump Users Symposium, pp. 163-173.

29. 235
Miller, J. E., 1995; The Reciprocating Pump : Theory, Design, and Use I(2nd
ed.),
Krieger Publishing Company.
Miller, J. E., 1964; “Experimental Investigation of Plunger Pump Suction
Requirements”, Paper presented at the ASME Petroleum Mechanical
Engineering Conference, Los Angeles, California.
Moffatt, R., 1990; “Clearing the Air on Vacuum Pumps”, Machine Design, July 12,
pp. 44-48.
Mosher, D.M., Boese, R.E. and Soukup, R.J. 1977; "Technical Note: The Advantages
of Sun Tracking for Planar Silicon Solar Cells", Solar Energy, Vol. 19, pp.
91-97.
Mowrey, C.C., 1998; "High Head-flow Centrifugal Pumps", Proceedings of 5th
International pump Users Symposium, May, pp. 155-161.
Mushamba, P.J.M., 1996; The Photovoltaic (PVP) Water Pumping Program in
Zimbabwe. Department of Energy resources and development, Harare
National Energy Administration, 1984; "A Feasability Study of Water Lifting
Technology in Thailand." Ministry of Science Technology and Energy, U. S.
Agency for International Development.
Nesbitt, B., 1993; "Stuffing Box Designs for Reciprocating Pumps", Proceedings of
13th International Pump Technical Conference, pp. 181-198.
Nesbitt, B., 1990?; Plunger Pumps for Solids Handling Applications, - Also many
additional papers held by Dartnall in this area.
Nolen, K.B. and Gibbs, S.G., 1990; "Quantitative Determination of Rod-Pump
Leakage with Dynamometer Techniques", SPE Production Engineering,
August, pp. 225-229.
O'Hara, P., 1993; "Increased Performance and Reliability of Pump Components
with Predictable Self Stresses", Proceedings of 13th International Pump
Technical Conference, pp. 437-453.
Osterle, J. F. and Swanter, S. R., 1991; “Conversion of Solar Radiation into
Electricity in Silicon Solar Cells: A Thermodynamic Assessment”, Journal
of Solar Energy Engineering, Vol. 113, pp 219-223.
Poste, P., 1993; "Rotating machine alignment: an overview", Proceedings of 13th
International Pump Technical Conference, pp. 241-264.
Poynton, J.P., 1983; Metering Pumps: Selection and Application, Marcel Dekker,
New York.
Prang, A. J., 1991; “Rotary Screw Pumps for Multiphase Products”, British Pump
Manufacturers Association, 12th International Pump Technical Conference,
London.

30. 236
Price, S.M., Smith, D.R. and Tison, J.D., 1988; "The Effects of Valve Dynamics on
Reciprocating Pump Reliability", Proceedings of the 12th International Pump
Users Symposium, pp. 221-230.
Pumping Equipment, 1996a; Duraqual Hydroblasters and Jetting Machines.
(brochure).
Pumping Equipment., 1996b; Duraqual Triples Pump, (brochure).
Ritchey, J. D., 1980; Low Yield Well Study, National Water Well Association, Ohio,
USA.
Rogers, G. F. C. and Mayhew, Y. R., 1967; Engineering Thermodynamics – Work
and Heat Transfer (2nd
ed.), Longmans, England.
Rogers, W., 1905a; Pumps and Hydraulics - Volume I. Theo Audel and Company,
New York
Rogers, W., 1905b; Pumps and Hydraulics - Volume II. Theo Audel and Company,
New York
Rogunov, M.A., 1993; Measures to Increase Service Life of Hermetically Sealed
Reciprocating Pumps, Theo. Audel and Company, New York.
Rwamwanja R. And Carter R. C., 2001; Private Sector Participation in Low Cost
Water Well Drilling Knowledge and Research (Kar) Project R7126,
Histories Of Pounder Wells And Hand-Augered Wells In Mpigi, Mukono
And Jinja Districts, Cranfield University (UK).
Said, S. A. M. and Zubair, S. M., 1993; “On Second-Law Efficiency of Solar
Collectors”, Journal of Solar Energy Engineering, Vol 115, pp ?
Salameh, Z. and Taylor, D., 1990; Step-up Maximum Power Point Tracker for
Photovoltaic Arrays, Solar Energy no. 44, pp 57-61.
Schwarz, K.K., 1987; "Fitness for Purpose - a System Design Complex",
Proceedings of 10th International Conference of the British Pump
Manufacturers' Association, March 24-25, pp. 131-139.
Sgro, T., 1995; “Extracts from Troubleshooting Guide to Cavitation-Devastation in
Pumping”, Process Engineering, July, pp. 35-36.
Schaffrin, C, Heini, W,.Litterst, T., 1994, SAHEL: A Software Program for the
Characterization and Simulation of Photovoltaic Water Pumping Systems,
?
Skelly, T., Hooke, C.J. and Walton, D., 1987; "Rotary lobe pumps: a non-standard
method of testing and mathematical modeling of the results", Proceedings of
10th International Conference of the British Pump Manufacturers' Association,
March 24-25, pp.149-162.

31. 237
Smith, M.D. 1993; "Pump Safety through Reliability - a Systems Approach",
Proceedings of 13th International pump Technical Conference, pp. 455-471.
Smulders, P.T. and de Jongh, J., 1994; "Wind Water Pumping: Status, Prospects and
Barriers", Renewable Energy, Vol. 5, No. I, pp. 587-594.
Spencer, L. C., 1989a; “A Comprehensive Review of Small Solar-Powered Heat
Engines: Part 1. A History of Solar-Powered Devices up to 1950”, Solar
Energy, Vol. 43, No. 4, pp. 191-196.
Spencer, L. C., 1989b; “A Comprehensive Review of Small Solar-Powered Heat
Engines: Part II. Research since 1950 – ‘Conventional’ Engines up to 100
KW”, Solar Energy, Vol. 43, No. 4, pp. 197-210.
Spencer, L. C., 1989c; “A Comprehensive Review of Small Solar-Powered Heat
Engines: Part III. Research Since 1950: ‘Unconventional’ Engines up to 100
KW”, Solar Energy, Vol. 43, No. 4, pp. 211-225.
Stoll, H., Durst, F., Peric, M., Pereira, J.C.F. and Scheuerer, G., 1993; “Study of
Laminar, Unsteady Piston-Cylinder Flows”, Journal of Fluids Engineering,
Vol. 115, pp. 687-693.
Stone, K.W., Drubka, R.E. and Braun, H., 1994; "Impact of Stirling Engine
Operational Requirements on Dish Stirling System Life Cycle Costs", Joint
Solar Engineering Conference, ASME, pp. 529-534.
Stork, U., 1993; “Wear of Check Valves of Reciprocating Displacement Pumps
Caused by Abrasive Suspensions”, Lecture, Pump Congress (Pumpetang),
Karlsruhe.
Stork, U. and Wollmann, W., 1993; "Requirements for Reciprocating Pumps in
Chemical Process Technology in the View of Safety and Environment
Protection", Proceedings of 13th International pump Technical Conference, pp.
265-276.
Suman, J. R., 1923; Petroleum Production Methods (3rd
ed.), Gulf Publishing Co.,
Texas, Houston.
Suttmann, B., 1990; Optimization of Pumping Elements of Eccentric Screw Pumps,
Allweiller, Germany (internal).
Swaffield, M., 1994; “Pumping High Viscosity Liquids”, World Pumps, March 1994,
pp. 36-38.
Swift, R. H., 1987; "On Maximizing The Long-term Efficiency of Water-Pumping
Windmills", Wind Engineering, Vol. 11, No. 5, pp. 277-291.
Taylor, I., 1967; “What NPSH for Dissolved Gas?”, Hydrocarbon Processing, Vol.
46, No. 8, pp. 133-134.
The War Office, Britain, 1936; Military Engineering (Volume VI): Water Supply,
His Majesty's Stationery Office, London.

32. 238
Thorne, E. W., 1983; "Pumps - the Heart of the Matter", Proceedings of the 8th
Technical Conference of the British Pump Manufacturers' Association, March,
pp. 249-258.
Thorpe, D. W., 1995; “One-up Pump Diagrams”, World Pumps, March 1995, pp. 39-
43.
Tripp, H.A. 1988; "Mechanical Performance of Fiberglass Sucker-rod Strings",
SPE Production Engineering, August, pp. 346-350.
Van Meel, J. and Oldenkamp, H., 1984; "Field Testing by CWD of Water Pumping
Windmills", European Wind Energy Conference, Hamburg, pp. 761-766.
Van Poollen, H.K. and associates, 1985; "Sucker Rod Pumping", Australian Mineral
Foundation Workshop Course, led by Rugg, F.
Vetter, G., 1998; "Reliability and Future Development of High Pressure
Diaphragm Pumps for Process Service". Proceedings of 5th International
pump Users Symposium, pp. 49-63.
Vetter, G., 1994; “Watch Characteristics of Metering Pumps for Good Accuracy”.
World Pumps, May, pp. 63-69.
Vetter, G. and Hering, L., 1980; “Leak free Pumps for the Chemical Process
Industries’, Chemical Engineering, September, pp. 149-154.
Vetter, G., Jarosch, J., Schlucker, E. and Horn, W., 1993; "Safe and Reliable Process
Diaphragm Pumps", Proceedings of 13th International pump Technical
Conference, pp. 277-306.
Vetter, G. and Kieβling, R., 1995; “Verschleiβverhalten von Pumpenwerkstoffen bei
Hydroabrasiver Strahlbeanspruchung”, Konstruktion, Vol. 47, pp. 186-190.
Vetter, G. and Schweinfurter, F., 1990; “Elimination of Disturbing and Dangerous
Pressure Oscillations caused by High Pressure Positive Displacement
Pumps”, Proceedings of the 6th International Conference on Pressure Surges,
the Fluid Engineering Centre, Cranfield, Bedford, UK, pp. 309-324.
Vetter, G. and Seidl, B., 1993; “Pressure Dampening Methods for Reciprocating
Pumps”, Proceedings of the 10th International Pumps Users Symposium, pp.
25-39.
Vetter, G., Thiel, E. and Stork, U., 1989; "Reciprocating Pump Valve Design",
Proceedings of 6th International Pump Users Symposim, April, pp. 39-52.
Vetter, G. and Wincek, M., 1993; "Performance Prediction of Twin Screw Pumps
for Two-Phase Gas/Liquid Flow", Proceedings of the Fluids Engineering
Conference, Washington, D.C, pp. 331-340.
Vetter, G. and Wirth, W., 1995; “Understand Progressing Cavity Characteristics
and Avoid Abrasive Wear”, Proceedings of the 12th International Pump Users
Symposium, pp. 47-59.

33. 239
Vetter, G. and Wirth, W., 1993; “Suitability of Eccentric Helical Pumps for Turbid
Water Deep Well Pumping in Photovoltaic Systems”, Solar Energy, Vol. 51,
No. 3, pp. 205-214.
Vetter, G. and Zimmerman, G., 1993; "NPSH, of Rotary Piston Pumps", Proceedings
of the Fluids Engineering Conference, Washington, D.C, pp. 347-353.
Wachel, J.C., 1989; “The Effect of Pulsations on Cavitation in Reciprocating
Pumps”., ASME-ETCE Conference, Paper 89-PET-10.
Wachel, J.C. and Price, S.M., 1988; “Understanding how Pulsation Accumulation
Works”, Pipeline Engineering Symposium , Vol. 14, pp. 21-31.
Wallbank, S.W. and Lash, J.H., 1987; "Quality Planning - Mechanism for and the
Benefits to Pump Manufacturers and Engineering Contractors",
Proceedings of 10th International Conference of the British Pump
Manufacturers' Association, Cambridge, UK, pp. 119-130.
Weisbach, J. and Herrman, G., (Trans. Dahlstrom, K.P.), 1897; The Mechanics of
Pumping Machinery, MacMillan and Co, London.
Whitfield, G.R. and Burton, J.D., 1994; "Increasing the Cost-effectiveness of Small
Solar Photovoltaic Pumping Systems", Renewable Energy, Vol. 5, No. I, pp.
342-344.
Wild, A.G., 1993; "Progressing Cavity Pumps: The Best Design fFor your
Application", Proceedings of 13th International pump Technical Conference,
pp. 219-240.
Winton, John G., 1883; Modern Steam Practice and Engineering, Blackie and Son,
London.
Worthington, H.R., 1887; The Worthington Steam Pumping Engine: History of its
Invention and Development, Henry R. Worthington, New York.
Yamaguchi, A., 1992; “Motion of the Piston in Piston Pumps and Motors
(Experiments and Theoretical Discussions)”, Paper No. 91-1183 A.
END

34. 240
B3: Bibliography and References for Historical Research
Three separate bibliographies/references are included. They are: B1, B2 and B3.This
categorization was done because research for the thesis fell into three distinct areas:
B1: Engineering Design Process, Methodology and Science.
B2: Pumps, Ground Fluid Technology, Technology and Relevant History.
B3: Historical Research.
Agricola, Georgius, 1588; De Re Metillica, Engineer’s Classic.
Armitage, W.H.G., 1961; A Social History of Engineering, Faber and Faber London.
Burstall, A.F., 1963; A History of Mechanical Engineering, Faber and Faber London.
Dampier, W.C., 1942; A History of Science and its Relations With Philosophy and
Religion, Cambridge University Press.
De Camp, L.S., 1960; The Ancient Engineers, Dorset Press.
Derry, T.K., Williams, T.I., 1960; A Short History of Technology From the Earliest
Times to A.D. 1900, Oxford at the Clarendon Press.
Dunsheath, P., 1962; A History of Electrical Engineering, Faber and Faber London.
Keller, A.G., 1964; A Theatre of Machines, Chapman and Hall London.
Kranzberg, M., Pursell, Jr. C.W., 1967; Technology in Western Civilisation, Oxford
University Press.
Larsen, E., 1967; Great Ideas in Engineering, Robert Maxwell London.
Layson, J.F., 1881; Famous Engineers, John G Murdoch & Co., Ltd.
Lucke, C.E., 1911; Power, Columbia University Press.
Parsons, W.B., 1939; Engineers and Engineering in the Renaissance, The M.I.T.
Press.
Ramelli, Agostino, 1500’s; Diverse et Artificiose Mechaniques, Engineer’s Classic.
Smiles, S., 1878; Lives of Enginers; The Steam-Engine. Boulton and Watt, John
Murray, London.
Smith, J. 1816; The Mechanic of Compendium of Innovations, Caxton Press,
London.
The Institution of Mechanical Engineers (2 Vols), 1963; Engineering Heritage,
Heinemann.
END
View publication stats
View publication stats