Smarthome is Australia’s leading provider of Wireless Home Automation products including Zwave, X10, remote control lighting, home security systems. Tel.No. : 03 9397 6657

1. Z-Wave Solutions Guide: When to Use the Z-Wave Plug-in
Switch Controller and the Z-Wave Plug-in Dimmer Controller
Switches are primarily used when you want a controlled device to
be either completely on or fully off. Switches are usually the most
common tool used to control the lights in homes without home
automation.
In automated homes, switch controllers are typically used to
control the temperature, appliances, and various types of lights,
such as lighting for the front porch, closets, and living rooms.
When You Should Use the Z-Wave Plug-in Dimmer Controller
Dimmers are used when you want to adjust the intensity of an
incandescent light. The Z-Wave Plug-in Dimmer Controller can
also be used to: set a lower turn-on light intensity, employ a
variety of intensities for different times of the day (brighter at
night), or program special lighting for different applications (lower
intensity on a romantic date). Due to the dimmer’s serviceability
and ease of use, the Z-Wave Plug-in Dimmer Controller is usually
the most common device found in home automation systems.
How to Use the Z-Wave Plug-in Switch Controller and the Z-Wave
Plug-in Dimmer Controller:
Due to their flexible home automation capability, these controllers
are largely popular. Aside from being controlled remotely, they
can also be used as conventional switches and dimmers. This
makes them perfect for homes with family members who are new

2. to automation. Physically turning them on and off at the device is
done by a single tap on the top or bottom paddle. Dimming
requires pushing the top or bottom paddle until the fancied
intensity is achieved.
Since they are home automation switches they can also be
controlled online, with touch screen panels, through scene
programming, or by remote control.
Since the vast majority of switches and dimmers out in the market
today communicate via powerline which need a need a neutral
wire to work, you can always go for wireless technology like Z-
Wave that doesn’t rely on powerline wiring. Since they are
wireless, you’ll save money from not having a qualified electrician
run wiring to your switchbox.
About Z-Wave Products
Z-Wave products, such as the Z-Wave Plug-in Switch Controller,
enable different devices to communicate including those related
to appliances, home theater systems, appliances, and energy
management, access and security control, and building
automation.
In order for your device to properly join existing Z-Wave networks,
only go for those that use authentic Z-Wave chips. Look for
manufacturers that label their products as Z-Wave certified, which
means the product passed a stringent conformance test to assure
it meets operational standards and can work with other Z-Wave
certified devices. To get you started, look for a trusted home

3. automation retailer that offers affordable lighting, security, and
home entertainment products that the average plug-and-player
can safely and easily install.
The beauty of home automation is that the possibilities are
virtually endless. The drawback is deciding just where to start. For
beginners, start out by doing a bit of research to know about
home automation. Next, decide what to purchase to make your
hopes a reality.
http://www.smarthome.com.au