LPO 1512

1. SPECIFICATIONS
TATA LPO 1512
TMML EDEN

2. ENGINE
 MODEL – CUMMINS 6BTAA 5.9 EURO 3RD
 ENGINE TYPE – WATER COOLED DIRECT
INJECTION TURBO CHARGED DIESEL
ENGINE.
 NO. OF CYLINDER – 6 INLINE
 BORE/STROKE – 102MM/120MM
 CAPACITY – 5883 CC
 MAX. ENGINE OUTPUT – 99kw @2200
rpmWITH VISCOUS FAN
 MAX. TORQUE – 490 Nm @ 1400 rpm WITH
VISCOUS FAN

3. COMPRESSION RATIO – 17.6 : 1
FIRING ORDER – 1-5-3-6-2-4
AIR FILTER – DRY TYPE REMOTE MOUNTED
OIL FILTER – SPIN ON FULL FLOW PAPER TYPE
FUEL FILTER – TWO STAGE PRE AND FINE FILTRATION
WITH WATER SEPERATOR
CAPACITY OF COOLING SYSTEM -9 LITERS(ENGINE) OR
24 LITERS(TOTAL)
CRANKCASE OIL CAPACITY – MAX. 14.3 LIT., MIN. 12.3
LIT.
WEIGHT OF ENGINE – 413 KG WITH FLYWHEEL AND AIR
COMPRESSOR BUT WITHOUT ELECTRICALS
RADIATOR FRONTAL AREA – 3022 SQ CM

4.  MODEL – TATA G600 OD
 NO. OF GEARS – 6 FARWARD 1 REVERSE
 GEAR RATIO – 1ST – 6.58
2ND – 3.79
3RD – 2.29
4TH – 1.49
5TH – 1
REV. 0.77

5.  MODEL – SINGLE REDUCTION, HYPOID GEARS,
FULLY FLOATING AXLE SHAFTS- RA108 RR
 RATIO – 50857 :1 (41/7)

6. FRONT AXLE
HEAVY DUTY FORGED I
BEAM, REVERSE ELLIOT
TYPE

7.  TYPE – INTEGRAL HYDRAULIC POWER
ASSISTED STEERING
 STEERING WHEEL DIA – 475
 RATIO – M/S RANE AND ZF 20.2:1
M/S FORNI (CHINA) 20.4:1

8. BRAKES
• SERVICE BRAKES : DUAL CIRCUIT, FULL AIR
S CAM BRAKE SYSTEM.
• BRAKE DRUM DIAMETER : 410 MM
• LINING AREA : FRONT– 2500 sq cm, REAR–
2750 sq cm.
• PARKING BRAKE – HAND OPERATED

9.  LADDER TYPE HEAVY DUTY FRAME
RIVETED/ BOLTED CROSS MEMBERS

10. SUSPENSION
 TYPE : LEAF SPRING AT FRONT AND REAR
 SHOCK ABSORBER : HYDRAULIC DOUBLE
ACTING TELESCOPIC TYPE AT FRONT AND
REAR

11. TYRES : 10R-20-16PR
WHEELS RIM : 7.5*20 WITH 8 MTG.
HOLES
NO. OF WHEELS : FRONT – 2, REAR –
4, SPARE - 1

12.  CAPACITY : 250 LITERS

13. ELECTRICAL SYSTEM
 SYSTEM VOLTAGE : 24 VOLTS
 ALTERNATOR CAPACITY : 75 AMPS
 BATTERY : 2*12V, 150AH 21 PLATES

14.  WHEEL BASE : 5545
 TRACK FRONT : 1951
 TRACK REAR : 1809
 OVERALL LENGTH : -
 MAX. WIDTH : -
 MIN. GROUND CLEARANCE : 276

15. WEIGHTS
 BARE CHASIS KERB
WEIGHT WITH COWL : 4380
( WITH SPARE WHEEL & TOOL)
 MAX. PERMISSIBLE FAW :
6000
 MAX. PERMISSIBLE RAW :
10200
 MAX. PERMISSIBLE GVW :

16. PRESENTED BY…..