This is the presentation of a newly created French innovation platform dedicated to LED lighting. The platform is located nearby Lyon, France.

1. Company Profile

2. National Lighting Innovation Platform
• Initiated in spring 2010 by CEA-LETI & Cluster Lumière
members
• Selected as Technological Platform and granted for public
funding by the French Ministry of Industry on September
23rd, 2011
• Created as a private company on November, 30th 2011, with
700 000€ capital, owned by 30 shareholders
• 3,6 millions € investment spread on 2012 – 2013 – 2014
• 1,6 million € support from French State and local authorities
Historic

3. Lighting : unprecedented challenges
• Technological rupture (LED & OLED)
– Lots of new products, new form factors
– Full avantages of electronics
– Lack of performance criterias (norms, …)
– Fast improvement rate (276 lm/W en labo)
– New entrants (asian, electronics)
• Environmental, legal and financial pressure
– Need for more efficient solutions, Energy Performance Contracting
– New legal standards (RT 2012, EU 1194/2012,…)
– Less public investments, Private Funded Initiatives (PFI)
– Need for more attractive business places
• Social pressure
– People ageing
– Health and well being considerations
• Biological effect of light
– Depressivness
– Alertness
Context

4. To support actors of the value chain in the lighting
revolution
Bring answers to :
• Technological rupture of LED & OLED
• System reliability
• Smart lighting
• Norms and standards
• Energy efficiency
• New lighting usage
• Changes in job contents
Mission

5. Market
Manufacturers
 LED Luminaires
 Retrofit LED lamps
Specifiers et users
 Property developpers : buildings, streets,
shops,…
 Contractors : architects, lighting designers,
engineering offices,…
 Retailers
 Installers
 Tenants

6. Needs : Manufacturers
(re) Design Development Industrialization Commercialization
LED & modules
characterisation
Norms and legal
scouting
Training
Benchmarking
Reverse engineering
Reverse costing
Prototype testing
Performance
verification
of prototypes
Prototype demonstrations
In real situation
for pre-commercial
validation
Performance
verification
of pilot serie
products
Performance
verification of
regular production
products
Demonstration
of products in real
situation

7. Needs : Specifiers & Users
Project development Quotations Operation
Norms and legal
scouting
Simulations
Engineering To Order
product prototypes testing
Performance
verification
of chosen
products
Built-in lighting
solutions
prototypes testing
Performance
verification
of the lighting
installation
Lighting
installation
diagnostic
Execution
Performance verification of
catalogue products
Training

8. Performance of LED Systems
Electrical
Reliability
Photo-
metry
Luminous flux
Colour point
Colour
temperature
Colour rendering
Light distribution
Flux maintenance
Consummed power
Voltage
Current
Efficacité lumineuse
Power factor
Colour shift
Early failures
Harmonics
distorsion

9. PISEO Offer 2013
Photometry
• Luminous flux
• Spectral and colour analysis (Colour point, CCT, CRI)
• Light distribution
• 2D luminance distribution
Electrical parameters
• Consummed power
• Luminous efficacy
• Cos ϕ, Power factor
• Harmonic distortion
• Flicker
Thermal characeristics
• Thermal imaging with IR camera
• LED junction temperature in running mode
Half and full day lab sessions

10. PISEO Offer 2013
Reliability testing
• Design and manufacturing process evaluation :
• Critical visual inspection of electronics
(vs state of the art)
• Potential failure detection by thermal cyscling
• On / Off cycles
• Photometry after testing (flux, CCT, colour point,
CRI)
• LED integration vs manufacturer recommendations
• Flux maintenance, CCT and colour shift after 25%
specified life time with 6000h max

11. PISEO Offer 2013
Verification of legal and norms requirements
• Evaluation of photobiological risk according to EN 62471
(Application of European directive 2006/25/EC)
• Evaluation of compliancy with Europan Regulation
1194/2012 (Eco-design and performance of LED lamps,
modules and luminaires)
• Evaluation of compliancy with IEC 62612 (Perfomance of LED
lamps >50V)
• Evaluation of compliancy with IEC 62717 (performance LED
modules)
• Evaluation of compliancy with IEC 62722-2-1 (performance
LED luminaires)
• CE marking
• Legal and norms scouting

12. PISEO Offer 2013
Safety and environmental tests (partenship)
• Electrical safety
• IP & IK tests
• EMC tests
• Endurance tests
Training, symposiums
• Legal and norms
• Electronic systems reliability
• FMEA
• Organisation of symposiums

13. Unique concentration of photometrical, electrical &
thermal imaging equipment
Equipement
Photo-Goniometere LMT GO DS 2000
type C
Gonio-photomter MAJANTYS for
retrofit lamps
2 m Integrating sphere
INSTRUMENT SYSTEMS
equipped with CAS 120
spectrometer
Thermal camera INFRATEC 50 cm integrating sphere
MAJANTYS (or 5cm for LED
sources) equipped B&WTEK
spectrometer
Photobilogical test bench
OST-300 EVERFINE
(200nm-3000nm)
Video-luminancemeter
LUMETRIX
Non exhaustive pictures

14. Quality as our foundation
• Quality approach according to ISO 17025
• High precision equipments verified by accredited laboratories
(METAS, LNE)
• Test performed according to international standards (NF EN
13032-1 et NF PREN 13032-4)
• Participation to the IEA international inter-laboratory
comparaison program of SSL products
Quality

15. Team
Competences
Technical Partners
Cédric DOGER
Managing
Director
Lydie BLANC
Business
Development
Stéphane ROBERT
Technical Manager
Dan BRETON
Lighting & Optical
Engineer
Joël THOME
Senior Consultant

16. Senior consultant Responsable Technique
Joël Thomé Stéphane ROBERT
Port. 06 69 42 55 41 Tel. 04 26 83 02 26
Thome.joel@piseo.fr Port. 06 69 42 55 30
robert.stephane@piseo.fr
www.piseo.fr
Contactez nous