The use of Profibus & Profinet in Factory Automation

1. Profibus & Profinet in Factory Automation Event, Coventry 21st August 2013

2. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
2
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman
Welcome
House keeping points – Visits, Phones & Fires.
Visits – Toilets are through the doors and on the left
Phones – Please switch off or set to Silent
Fires – If alarm sounds, follow presenters, down to the
reception and out towards the main car park.

3. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
Agenda
3
09.00 Coffee and Registration
09:30 Introduction to the Manufacturing Technology Centre
09.45 Profibus & Profinet Update. - Mark Freeman
09.55 Practical steps for a successful Profibus project. - Xiu Ji
10.35 Introduction to Profinet. - Derek Lane
11.15 Coffee
11.35 Safety & Security on PROFINET & Profibus networks. -
Peter Brown
12.15 PROFIBUS Health checking and monitoring - Live demonstration.
Andy Verwer/Dale Fittes
12.55 Lunch
13.35 Features & Benefits of Profinet networks - Live demonstration. -
Dave Walker/Andy Williams
14.15 PROFINET Frame Analysis. Demonstration showing the use of
WireShark to look at PROFINET frames. - Peter Thomas
14.55 Summary/Questions
15.00 Close followed by (optional) tour of the MTC workshops
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

4. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
4
Two technologies in one organisation
Regional PI
Associations
PI Competence
Centers
PI Test
Laboratories
PI Training
Centers
PI (PROFIBUS & PROFINET International)
Technologies
Fieldbus based
Automation
Technology
Ethernet based
Automation
Technology
Proxy Technology
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

5. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
5
Australia/
New Zealand
RPA, PICC, PITC
PI worldwide support
Poland
RPA, PICC
Russia
RPA
Slovakia
RPA
Southern Africa
RPA, PICC, PITC
China
RPA, PICC, PITL
Japan
RPA, PICC, PITL
Korea
RPA, PICC
South-East-Asia
RPA, PICC
Middle-East
RPA
India
RPA, PICC
Czech Rep.
RPA, PICC, PITL
Brazil
RPA, PICC
USA
RPA, PICC,
PITC, PITL
Chile
PICC
Denmark
RPA
Finland
RPA
UK
RPA, PICC, PITC
Ireland
RPA, PICC, PITC
Netherlands
RPA, PICC,
PITC, PITL
Norway
RPA, PICC, PITC
Switzerland
RPA, PICC, PITC
Germany & Austria
RPA, PICC
PITC, PITL
France
RPA, PICC, PITC
Belgium
RPA, PICC
Italy
RPA, PICC
Sweden
RPA, PICC
Spain
RPA, PICC
27 Regional PI Associations (RPA)
50 PI Competence Centers (PICC)
18 PI Training Centers (PITC)
10 PI Test Laboratories (PITL)
PI worldwide: PI Technical Support:
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

6. 66
PROFIBUS Nodes
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

7. 77
PROFIBUS Nodes in PA
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

8. 88
PROFINET Nodes
World Market for Industrial Ethernet and
Fieldbus Technologies 2013
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

9. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
9
Use of the PROFIsafe profile
Tested and accepted with
PROFIBUS & PROFINET
Standard and failsafe
communications over the same
transmission path
Meets the highest safety categories,
SIL level 3 / PL e / Cat. 4
First communications standard
developed in accordance with safety
standard IEC 61508. Developed to
IEC 61784-3-3, PROFIsafe is the
international standard
Even wireless…
Failsafe and available,
just like hard-wired!
“Black
channel"
Standard
data
Safety-
related
data
PROFIsafe
Layer
Standard
BUS protocol
Standard
data
Safety-
related
data
PROFIsafe
Layer
Standard
BUS protocol
PROFINET
Industrial
Ethernet
Access Point
Client
RCoax RCoax
IO-Device
Mobile Panel
Access Point
PROFINET
Industrial
Ethernet
Failsafe communications – even wireless
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

10. 1010
PROFIsafe Nodes
World Market for Industrial Ethernet and
Fieldbus Technologies 2013
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

11. 1111
Training for network members
Training is available in a range of areas to upgrade your skills
including:
Certified PROFIBUS Engineer – combining installation,
commissioning and engineering
PROFIBUS System Design Course
Certified PROFINET Engineer – combining installation,
commissioning and engineering
PROFINET Developer Course
Training can be undertaken at the PROFIBUS International
Competence Centre in Manchester, on your company premises or
at an off-site location of your choice
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

12. 1212
Training for network members
PROFIBUS and PROFINET training is offered through:
PROFIBUS International Competence Centre
- Manchester Metropolitan University in Manchester
or a location of your choice
(http://www.sci-eng.mmu.ac.uk/ascent/)
PROFIBUS on-site training is offered through:
PROFIBUS International Training Centre
- Verwer Training & Consultancy Ltd
(http://verwertraining.com/)
Our training partners
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

13. 13
Web Based Training
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

14. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
14
PROFIBUS & PROFINET on the Web
www.profibus.com www.profinet.com
www.profibus.co.uk
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman

15. Profibus &
Profinet UK
User Group
Profibus &
Profinet in
Factory
Automation
Agenda
15
09.00 Coffee and Registration
09:30 Introduction to the Manufacturing Technology Centre
09.45 Profibus & Profinet Update. - Mark Freeman
09.55 Practical steps for a successful Profibus project. - Xiu Ji
10.35 Introduction to Profinet. - Derek Lane
11.15 Coffee
11.35 Safety & Security on PROFINET & Profibus networks. -
Peter Brown
12.15 PROFIBUS Health checking and monitoring - Live demonstration.
Andy Verwer/Dale Fittes
12.55 Lunch
13.35 Features & Benefits of Profinet networks - Live demonstration. -
Dave Walker/Andy Williams
14.15 PROFINET Frame Analysis. Demonstration showing the use of
WireShark to look at PROFINET frames. - Peter Thomas
14.55 Summary/Questions
15.00 Close followed by (optional) tour of the MTC workshops
PROFIBUS and PROFINET in Factory Automation Event, Coventry. 21st August 2013 Mark Freeman