Here is a brochure courtesy of Red-D-Arc of used equipment people can purchase.

1. Used...
Welders,
Positioners,
Specialty Equipment.
reddarc.com

2. GX200 2+4 Gasoline Engine-Driven Welder DC CC
Fuel Efficient, Low Noise Level
4,000 Watt AC Generator
11HP GX340 Honda Gasoline Engine
Exceptionally smooth output from the brushless, asynchronous alternator provides excellent welding characteristics and arc
striking voltage. Lightweight and portable with auxiliary power available while welding.
D300K 3+3 Diesel Engine-Driven Welder DC CC
Available with Optional CV Module
Fuel Efficient V1903 Kubota Diesel Engine
3,000 Watts AC Auxiliary Power
The pure DC generator with all copper coils provides excellent welding characteristics. Constant speed engine for instant arc
starting. The V1903 Kubota diesel engine provides reliable, efficient operation in even the most severe conditions.
Rated output 300 A at 32 VDC 60% duty cycle, 250 A at 30 VDC 100% duty cycle.
D302K 3+12 Diesel Engine-Driven Welder DC CC CV
Stick, MIG, Lift-Arc DC TIG, Flux-Cored Welding and Air Carbon Arc Gouging
Kubota V1505-E2BG1, Tier 2, 20.2 HP Liquid-Cooled Diesel Engine
12,000 Watts Peak, 10,000 Watts Continuous 120/240 VAC Power
The 3+12 is a constant current/constant voltage, DC diesel engine-driven welder with a high-efficiency, three-phase
welding generator that requires less fuel but has enough power for gouging with up to 1/4" carbons.
D500K 5+3 Diesel Engine-Driven Welder DC CC
Full Range Amperage Control
Fuel Efficient Kubota F-2803 Diesel Engine
3,000 Watts AC Auxiliary Power
For demanding jobs that call for high amperage capabilities using electrodes up to 1/4" in diameter and air carbon arc (CAC-A)
gouging with carbons up to 5/16" in diameter.
D502K 5+4 Diesel Engine-Driven Welder DC CC CV
Stick, MIG, DC TIG, Flux-Cored Welding and Air Carbon Arc Gouging
Kubota V3300-B 49 HP Liquid-Cooled Diesel Engine
5,500 Watts Peak, 4,000 Watts Continuous 120/240 VAC Auxiliary Power
The three-phase rotating field generator produces a smooth DC weld output and has enough power for gouging with up to
3/8" carbons. Simplified control panel with a five position range switch and a fine control potentiometer provides easy set-up.
Welding Accessories
Welding Trailers
Welding Accessories Welding Accessories
Remote Controls Welding Cables

3. Used Welders, Positioners,
Specialty Equipment
ES275i and Invertec V275-S Stick Welders DC CC
C
Stick, DC TIG with Touch-Start
200 A at 28 VDC, 100% Duty Cycle Output
275 amp at 35% duty cycle, constant current, DC, inverter welder with both single- and three-phase,
50/60 Hz voltage input. Outstanding E6010 and E7018 performance using up to 7/32” diameter
electrodes that enables both whip or drag techniques.
E300 DC Stick Welders DC CC
Rugged Tubular Pak-Lok-Frame
Excellent Performance and Versatility
250 A at 30 VDC, 30% Duty Cycle Output
For stick welding with all types of electrodes up to 3/16" including low hydrogen, stainless steel, hardfacing, aluminum and
bronze. Also scratch start DC TIG, and MIG or flux-cored welding with voltage sensing wirefeeders.
E500 and Idealarc R3R-500 Stick Welders DC CC
Produces quality, low spatter, smooth arcs without pop-outs
Calibrated current control knob for simple and easy procedure setting
500 A at 40 VDC, 60% Duty Cycle Output
The choice for industrial applications offering a smooth, consistent arc and enough amperage for air
carbon arc gouging with up to 3/8" diameter carbons.
EX300 and XMT 304 Multiprocess Welders CC CV
V
300 Amps Output at 32 Volts, 60% Duty Cycle Output
CC/CV DC Inverter Technology
Lightweight, Compact, Portable
Excellent performance for most welding processes including pulse MIG and TIG with optional Optima and
d
Intellitig-4 controls. Available with either 208-230/460 V or 460/575 V input connections.
E300 3+2 Multiprocess Welders and Paks DC CC CV
2,000 Watts AC Auxiliary Power
Arc Force, Hot Start, Continuous Output Control
Full Remote Control Capabilities
Outstanding arc characteristics on both constant current and constant voltage processes in a rugged,
compact design. Includes MS-style connections for 115V wirefeeders and 3-pin remote controls.
DC400 and DC600 Multiprocess Welders DC CC CV
V
Full Range Output Control
CC Stick, CV MIG/FCAW, and CV Submerged Arc Welding Modes
Designed for GMAW (MIG), FCAW and submerged arc welding, and stick and air carbon arc gouging with
up to 3/8" diameter electrodes. Includes standard terminal strip for wirefeeders and remote controls.
Maxstar 200 SD and Syncrowave 250/350 TIG
TIG (GTAW) and Stick (SMAW) Processes - Pulsed TIG (GTAW-P) available with optional controls
Excellent Welding Performance, Control and Versatility
Lift-Arc start provides TIG arc starting without the use of high-frequency. Syncrowave models provide
constant current Squarewave technology. All are available with various Coolmate coolant systems or
Cool Runner systems for water-cooled TIG applications, and a variety of remote foot and hand controls.

4. Used Welders, Positioners,
Specialty Equipment
LN25 and 12VS Voltage Sensing Wirefeeders
MIG and Flux-Cored Welding
Operates on Arc Voltage and Open Circuit Voltage from CV or CC Welders
Operates off arc voltage with a voltage sensing control circuit. Can be operated with all electric and
engine-driven welders with CV capability but can also be used with CC welders for non-critical welds. .
LN-7, LN-8, and LN-9 Semiautomatic Wirefeeders
MIG, Flux-Cored and Submerged Arc Welding
Semiautomatic Constant Speed Wirefeeders
Solid State Control
Semiautomatic constant-speed wirefeeders providing dependable performance and reliable operation, making them ideal for
shop or field operations. Controlled wire feed speed during starting provides clean, positive starts and minimizes stubbing, and
spatter.
p
V
Viper, Python/Pro-Cut 55, 80 Plasma Cutters
rs
s
PCT 80 Plasma Torch Operates Without High Frequency
Torch Uses Only Three Consumables for Easy Maintenance
Patented Full-Flow Cooling for Long Consumable Life
Unmatched cutting speeds, low dross levels and unparalleled ease of
use. Machine and robotic torches are available.
SE1602W Smoke Extractor
Two Operating Speeds
Internal Spark Trap for Extended Filter Life
The SE1602W smoke extractor is a lightweight, stainless-steel enclosed, suitcase-sized air cleaner that is very
easy to transport about the jobsite. Welding fume is trapped at the source thus maximizing the protection to the
operator by removing airborne contaminant before it enters the operator breathing-area.
Positioners
s Turning Rolls
T
Up to 10,0 lb Capacity Positioners Available
10,000 ti Up to 400 ton Set Ca
Capacities Available
P
ProHeat 35 Induction Heating System
Weld Preheating and Stress Relieving
Liquid-Cooled and Air-Cooled Systems
Reduced Set-Up, Fast Time-to-Temperature
With the new ProHeat™ 35 induction heating system, joints can be rapidly and uniformly heated for preheat or
stress relief with minimal setup and instruction time. This system induces heat electromagnetically rather than
by using a heating element.
More information is available at www.reddarc.com/IHS