RTape has a new heat transfer solution that saves time and money...At an average of 220 working days a year and a burdened hourly shop rate of $75 per hour, your annual savings amounts to more than $15,000. Read the full article here (http://www.regionalsupplyblog.com/2013/04/22/how-to-flash-press-flexcut-sticky-lt/) Related Keywords: heat transfer, rtape, flexcut, Regional Supply

1. How to Flash Press FlexCut
Sticky LT
By: Regional Supply

2. RTape has a new heat transfer solution that saves time and
money...At an average of 220 working days a year and a
burdened hourly shop rate of $75 per hour, your annual
savings amounts to more than $15,000.

3. "Flash pressing" RTape’s FlexCut Sticky LT onto
cotton fabrics and cotton blends can reduce
printing time by almost half.
-When decorating a heat sensitive fabric, RTape’s FlexCut
Sticky LT (low temperature) is typically heat pressed at 235ｰ
F (115ｰC) for 17 seconds.
-However, Flash pressing FlexCut Sticky LT onto regular
cotton fabrics and cotton blends heat presses at a
temperature of 320ｰF (160ｰC).
-This reduces the pressing time to only 9 seconds - a
savings of 8 seconds per piece.

4. Using RTape's FlexCut Sticky LT can save
companies over $15,000 annually.
-Using the "flash press" method saves 8 seconds per print.
-Companies that press 400 garments a day end up saving
an hour each day.
-At an average of 220 working days a year and a burdened
hourly shop rate of $75 per hour, the company's annual
savings amounts to more than $15,000.

5. Companies interested in putting
FlexCut Sticky LT to the test can call
Regional Supply at 801-262-6451, or
get more information and/or samples
at www.rtape.com.

6. Shop online and read more at
www.RegionalSupply.com
- OR -
Get there directly at
www.regionalsupplyblog.com/2013/04/22/how-to-flash-
press-flexcut-sticky-lt/