1. Product General Information PT SHELTER PRIMA PERKASA A Master Distribution Company Member of SHELTER Group of Companies Kemang Point Building Suite 306 Jl Raya Kemang no 3, Jakarta 12730 Fluid Handling Division
6. INDUSTRIAL PRODUCTS INDUSTRIAL PVC SCH 80 PIPE & FITTINGS PVC SCH 80 has been used successfully in such areas as chemical processing, industrial plating, chilled water distribution, salt water, chemical drainage, and irrigation systems maximum temperature 40°C Application : Water distribution, irrigation system, drinking water, water treatment, industrial process. Size : Dia 1/8 - Dia 12 inch Material : PVC SCH 80 Type 1 Grade 1 Pressure Rating : PN 16 Operating Temp. : 0 - 60° C Jointing Method : Solvent Cements (Cold Fusion) Standard : ASTM D 1785 Certificate: NSF approval, IAPD *Please refer to Technical Catalog for Detail Information
7. INDUSTRIAL PRODUCTS INDUSTRIAL CPVC SCH 80 PIPE & FITTINGS Applicable for Hot water, Corrosive Hot Chemical Fluid up to 100°C. Excellent chemical resistance to most inorganic bases, acids, saline solutions and paraffinical hydrocarbons. Application : Chemical distribution, Corrosive Liquid, Water Distribution, etc. Size : Dia 1/2 - Dia 12 inch Material : C-PVC SCH 80 type 1 grade 1 Pressure Rating : PN 16 Operating Temp. : 0 - 93° C Jointing Method : Solvent Cements/ Cold Fusion Standard : ASTM D 1784 Certificate : NSF approval, IAPD *Please refer to Technical Catalog for Detail Information
8. INDUSTRIAL PRODUCTS INDUSTRIAL PVC CLEAR SCH 80 PIPE & Fittings PVC Clear SCH 80: clear rigid PVC high purity pipe and fittings. Application : Water distribution, irrigation system, drinking water, water treatment, industrial process. Size : Dia 1/4 - Dia 6inch Material : PVC Clear SCH 80 type 1 grade 1 Pressure Rating : PN 16 Operating Temp. : 0 - 60° C Jointing Method : Solvent Cements Standard : ASTM D 2446 Certificate : NSF approval *Please refer to Technical Catalog for Detail Information
9. INDUSTRIAL PRODUCTS INDUSTRIAL PP-H PIPE & FITTINGS PP-H resin guarantees excellent chemical resistance. Application : To convey raw & drinking water, chemical process, demineralised & industrial fluid. Size : 1/2 - 12 inch, 5 meter length Material : PP-H (HomopolymerPolyprophelene) Pressure Rating : PN 6, PN 10 Operating Temp. : 0° ÷ 100° C Jointing Method : Butt Welding/ Socket Fusion Standard : DIN Certificate : IQNET, ISO9001, SOP, DIBT, TA-LUFT *Please refer to Technical Catalog for Detail Information
10. INDUSTRIAL PRODUCTS INDUSTRIAL PVDF PIPE & FITTINGS Extremely pure polymer, it does not contain stabilizer lubricant additives plasticizer. Application : Water & chemical to convey ultra pure Size : 3/8 - 4 inch, 5 meter length Material : PVDF (Polyvinylidene Fluoride) Pressure Rating : PN 25, PN 20, PN 16 Operating Temp. : -40° ÷ 140° C Jointing Method : Butt Welding/ Socket Fusion Standard : DIN Certificate : UL-94, FDA, WRAS, TA-LUFT, DIBT *Please refer to Technical Catalog for Detail Information
11. INDUSTRIAL PRODUCTS INDUSTRIAL ABS PIPE & FITTINGS When considering environmental control system or more specifically the pipe work requirement for air conditioning, chilled or boosted cold water application, Durapipe ABS provide the perfect solution. Application : Chilled/ cold water, industrial process, etc. Size : Class C 1 - 8 inch Material : ABS (Acrylonitrile Butadiene and Styrene) Pressure Rating : Class B: 6 bar, Class C: 9 bar, Class D: 12 bar Operating Temp. : -40° ÷ 70° C Jointing Method : Solvent Cements Standard : BS Standard Certificate : DWIQ, WRAS, DNV, ABS, LLOYD’S Register *Please refer to Technical Catalog for Detail Information
12. INDUSTRIAL PRODUCTS INDUSTRIAL U-PVC VALVE & ACCESORIES Application : Regulator on distribution tool for water chemical and any other liquid handling Size : 3/8 - 4 inch, 5 meter length Material : PVC (Polyvinyl Chloride) Unplasticized Pressure Rating : PN 16 Operating Temp. : 0° ÷ 60° C Jointing Method : Solvent Welding Standard : ASTM, JIS, BS, DIN Certificate : TA-LUFT, Vd12440, PAS *Please refer to Technical Catalog for Detail Information
13. INDUSTRIAL PRODUCTS INDUSTRIAL C-PVC VALVE & ACCESORIES Rip CPVC valves offers a complete range of various value to convey industrial fluid under pressure at a maximum temperature of 100° C Application : Industrial Fluid, Chemical, Water process, drinking water, hot water Size : 3/8 - 12 inch (depend on valve type) Material : C-PVC (Chlorinated Polyvinyl Chloride) Pressure Rating : PN 16 Operating Temp. : -0° ÷ 100° C Jointing Method : Solvent Welding Standard : DIN, ANSI/ ASIM Certificate : UL-94, TA-LUFT *Please refer to Technical Catalog for Detail Information
14. INDUSTRIAL PRODUCTS INDUSTRIAL PP-H VALVE & ACCESORIES Rip PP-H valves offers a complete range of various value to convey industrial fluid under pressure at a maximum temperature of 100° C Application : Chemical process, especially in case of haogens and alkaline solution, and special additives Size : 3/8 - 12 inch (depend on valve type) Material : PP-H (PolypropheleneHomopolymer) Pressure Rating : PN 10 Operating Temp. : 0° ÷ 100° C Jointing Method : Butt Welding/ Socket Fusion Standard : DIN, ANSI Certificate : UL-94, TA-LUFT, DIBT *Please refer to Technical Catalog for Detail Information
15. INDUSTRIAL PRODUCTS INDUSTRIAL PVDF VALVE & ACCESORIES FIP PVDF valves offers a complete range of various valve to convey industrial fluid at temperature -40° ÷ 140° C. Application : Water & chemical to convey ultra pure Size : 3/8 - 12 inch (depend on valve type) Material : PVDF (Polyvinylidene Fluoride) Pressure Rating : PN 25, PN 20, PN 16 Operating Temp. : -40° ÷ 140° C Jointing Method : Socket Fusion Standard : DIN, ANSI Certificate : UL-94, TA-LUFT, DIBT, Class V-0 *Please refer to Technical Catalog for Detail Information
16. INDUSTRIAL PRODUCTS INDUSTRIAL ACTUATED VALVE & ACCESORIES FIP Actuated Valve to be used in the construction of process to convey industrial fluid handling. Application : Water process, drinking water, demineralized, ultrafiltration, chemical process etc. Size : 3/8, 12 inch (depend on values) Material : PVC, C-PVC, PP, PVDF Pressure Rating : PN 10, PN 16 Operating Temp. : 0° ÷ 60° C, 0°÷100° C, 0°-140° C Jointing Method : Solvent Welding, Socket Fusion, Butt Welding, Flange Standard : DIN , AMSI Certificate : TA-LUFT, DIBT,UL953 *Please refer to Technical Catalog for Detail Information
17. INDUSTRIAL PRODUCTS INDUSTRIAL SED METAL DIPRAGM VALVE Metal diaphragm valve for industrial application. Application : Water distribution, chemical and any liquid with max temperature of 177°C Product Range : Size : 15 - 200mm (1/2 - 8 inch) Material : Body : Iron Cast (6625), Pressure Rating : PN 10 Operating Temp. : 0° ÷ 177° C Jointing Method : Flange Drilling Standard : DIN Certificate : TUV Cort *Please refer to Technical Catalog for Detail Information
18. INDUSTRIAL PRODUCTS INDUSTRIAL SANITARY VALVE & ACCESORIES SED Sanitary valve Aseptic valve with stainless steel forged body. Application : Pharmaceutical, Laboratorium, Chemical process & high Purity System. Size : 1/2 - 8 inch Material : Body : Investment Cast Stainless Steel Forged Pressure Rating : Max 10 bar Operating Temp. : 0° ÷ 150° C Jointing Method : Flange ends Standard : DIN Certificate : TUV Cart Certificate : TA-LUFT, DIBT,UL953 *Please refer to Technical Catalog for Detail Information
19. INDUSTRIAL PRODUCTS INDUSTRIAL VALVE & ACCESORIES Vag provide nearly all stages of the treatment, transportation, distribution and distribution and strange of drinking & process water. which are designed to be durable, reliable and of economic benefit. Application : Treatment, transportation, distribution and strange of drinking & process water Size : DN 40mm - 600mm (depend on valve type) Material : Ductile iron cast with epoxy coated Pressure Rating : PN 10, PN16 Operating Temp. : 50° C Jointing Method : Flange Drilling Standard : DIN Certificate : TUV Cort *Please refer to Technical Catalog for Detail Information
20. INDUSTRIAL PRODUCTS INDUSTRIAL FLOW SENSOR, MONITOR & TRANSMITTER Every kind of solid free liquid to paddle wheel sensor & measure flow rate in both in metal & plastic pipes on water & waste water treatment, raw water, intake. Application : Treatment, transportation, distribution and strange of drinking & process water Material : Paddlewheel/ Magmeter: Wetted: -Sensor body : 316L SS/PVDF O-ring: EPDM/ FPM -Electrodes : SIGLSS Case: -Case: Polycarbonate (PC)/ PVC -Gasket: EPDM Pressure Rating : 16 bar @ 25°C, 8,6 var @ 70°C Operating Temp. : 70°C Jointing Method : Installation Fitting Standard : IPGS. Front *Please refer to Technical Catalog for Detail Information
21. INDUSTRIAL PRODUCTS INDUSTRIAL PH & ORP SENSOR, MONITOR & TRANSMITTER Design for water quality monitoring, water & waste water treatment, swimming pool & spa, surface finishing, scrubber control. Size : - Material : -Case: Polycarbonate (PC) -Panel Gasket:Neoprene -Wall Gasket: EPDM Pressure Rating : - Operating Temp. : -10°÷ 60°C Jointing Method : Flange Drilling Standard : IPGS for monitor & Ip68 for electrodes Certificate : ISO9001, ISO14001, CE *Please refer to Technical Catalog for Detail Information
22. INDUSTRIAL PRODUCTS INDUSTRIAL INSTALLATION FITTINGS FOR FLOW SENSOR, Plastic Tee (DN 15 40 mm), Clamp Saddle (DN 63 315), Wafer, Metal Tee. Application : Installation Fitting for FlowX3 & ChemX3 Size : 1/2 - 12 inch (depend on values) Material : PVC, C-PVC, PP, PVDF Pressure Rating : PN 10, PN 16 Operating Temp. : 0° ÷ 100° C *Please refer to Technical Catalog for Detail Information
23. INDUSTRIAL PRODUCTS INDUSTRIAL FLOW SENSOR & TRANSMITTER The paddlewheel flow sensor F3.00 is designed to be used with every kind of solid-free liquid. The sensor can measure flow from 0.15 m/s (0.5 ft/s) producing a frequency output signal highly repeatable. Application : Water and Industrial waste water treatment, Water Distribution, Processing and manufacturing industry, Textile Finishing, Chemical production, Cooling and Heating system, Swimming pools and Spas. Working range : F3.60M: 0.05 to 8 m/s (0.15 to 25 ft/s), F3.63M: 0.15 to 8 m/s (0.5 to 25 ft/s) Material : Wetted materials: -Sensor Body : 316L SS/ PVDF -O-rings: EPDM or FPM -Electrodes: 316L SS Case materials: - Case: Polycarbonate (PC)/PVC - Gasket: EPDM Pressure Rating : PVC-C body (F3.00.H; F3.00.P; F3.00.C): 10bar (145psi) @ 25° C (77 ° F) – 1.5 bar (22psi) @ 80 ° C (176 ° F) *Please refer to Technical Catalog for Detail Information
24. INDUSTRIAL PRODUCTS INDUSTRIAL TURBIDITY ONLINE SENSOR & MONITOR Leading edge Microprocessor Technology combined with 30 years of optical measurement expertise has allowed HF scientific to become the leader in regulatory reporting turbidimeters. Application : Pressure Rating : 1 – 200 psi (built in regulator set at 15psi) Operating Temp. : 0° - 50° (32° to 122° F) Certifications : USEPA, ISO 7027, CE Approved ETL Listed to UL 3111,1 and ETL Certified to CSA 22,2 No 1010-1-92 *Please refer to Technical Catalog for Detail Information
25. INDUSTRIAL PRODUCTS INDUSTRIAL PVC Solvent Cement Weld-on 717 is a clear or gray, heavy bodied, medium setting, high strength PVC solvent cements for all classes and schedules of pipe and fittings (including SCH 80) with interference fit through 12” diameter, non pressure applications only up to 18” diameter. Application : Use on all types of PVC plastic pipe application, Type I and Type II. It is approved for use with potable water pressure system, irrigation, turf, conduit, industrial pipe application, sewer, drain, waste, and vent system. Size : - 1/2 pin - pint - quart - gallon metal cans Standard : ASTM D-2564, NSF, IAPMO, UPC, CSA, SBCC, BOCA *Please refer to Technical Catalog for Detail Information
26. INDUSTRIAL PRODUCTS INDUSTRIAL C-PVC Solvent Cement Weld-On 724 is a gray, reduced VOC emissions, heavy bodied, medium setting, high strength CPVC solvent cement for all classes and schedules of pipe and fittings with interference fit, including schedule 80 through 12” diameter. Application : Use on CPVC and PVC industrial piping system. It is especially for system requiring chemical resistance to caustics, including hypochlorite solutions. It can also be used in systems for mineral acids, aggressive water and aqueous salt solutions. Size : pint, quart and gallon metal cans Standard : ASTM F-493 and SCAQMD Rule 1168/316A, NSF *Please refer to Technical Catalog for Detail Information
27. INDUSTRIAL PRODUCTS INDUSTRIAL ABS SOLVENT CEMENT Weld-on 773 is a black, medium bodied, fast setting, high strength ABS solvent cement for all classes and schedules of pipe and fittings with interference fit through 8” diameter. Application : Use on all types of ABS (Acrylonitrile-Butadiene Strene) plastic pipe applications, Type I and Type II. It is widely used for drain, waste and vent system (DMV), conduit and sewer applications. Size : 1/4 pint, 1/2 pint, pint, quart and gallon metal cans Standard : ASTM D-2235, NSF, IAPMO, UPC, SBCC, BOCA *Please refer to Technical Catalog for Detail Information
28. INDUSTRIAL PRODUCTS INDUSTRIAL PRIMER & SOLVENT CEMENT Weld-on P-70 is a purple or clear, reduced VOC emissions, non bodied, very fast acting, solvent primer. It is distinctly colored purple so detection of its use in a joint can be made. The strong, aggressive action of P-70 Primer softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings very rapidly. The benefit of this priming action is especially noticeable on parts being joined together in cold weather. Application : Used in conjunction with appropriate Weld-on solvent cements, will make consistently strong, well-fused joints. It is essential that the joining surfaces of pipe and fittings be softened and remain softened prior to assembly. Size : 1/4 pint, 1/2 pint, pint, quart and gallon metal cans Standard : ASTM F-656, SCAQMD Rule 1168/316A, NSF, IAPMO, UPC, SBCC, BOCA *Please refer to Technical Catalog for Detail Information
37. Standard/Approval : ANSI/ ASME A112.14.3-2000,PDI-G101,UPC (IAPMO)*Please refer to Technical Catalog for Detail Information
38. BUILDING PRODUCTS BUILDING Hot & Cold Water, Drinking Water and Chilled Water Wefatherm pipe & Fittings are approved for drinking water application, all threaded fittings using DZR insert made of high chemical and dezincification resistant brass, all fittings are PN 25, also available 3 layers pipe which is 75% less in linear expansion, 20% higher flow rate and longer support compared to standard pipe. Also available valve in PP-R material instead of cast iron or brass material. 10 year insurance warranty for customers risk protection. Application : Hot and Cold water, Drinking water, chilled water and air conditioning Product range : 3 layers pipe, single/standard pipe, fittings, stub flange, PP backing ring and valve Size : dia 20mm - dia 160mm Material : PP-R 100 Pressure Rating : Pipe : PN 10, PN 16, PN 20 Fittings : PN 25 Operating Temp. : Maximum Up to 95° C Jointing Method : Socket fusion, butt fusion welding Standard : DIN 8077/8078 Certificate/Approval : DVGW, SKZ, GermanischerLoyd, WRAS *Please refer to Technical Catalog for Detail Information
39. BUILDING PRODUCTS BUILDING Chemical Drainage Systems Vulcathene is proven as high performance piping system for chemical drainage with all chemical combination emptied in it including acids, alkali, solvent, detergents, blood samples, retro viruses and radioactive wastes, Corrosion free, simple and fast installation due to mechanical joint system, lower installation cost. Application : Hospital, laboratory, research facilities, school and university, industrial facilities Product range : Pipe & Fittings, Waste outlets, Sink, Dilution recovery traps, Drip cups, Anti-siphon traps Size : ID=38mm (1 ½”), ID=51mm (2”),ID 76mm (3”), ID 102 mm (4”),ID=152mm (6”) Material : Co-polymer polypropylene (PP) with 3% carbon black ultraviolet stabilizer. Pressure Rating : Non Pressure Piping System Operating Temp. : - 20°C ÷ 100°C Jointing Method : Mechanical Joint fittings Standard/Approval : BBA Tested/ Approved *Please refer to Technical Catalog for Detail Information
40. BUILDING PRODUCTS BUILDING Poliphon - Accoustic Pipe for Waste Drainage System Poliphonacoustic pipe is new technology of piping system for noise reduction for waste drainage systems application, Max. noise only 20 dB, Corrosion free, Faster installation due to push fit jointing systems, lower installation cost, high chemical resistance, High temperature application up to 95°C. Application : For waste & soil drainage systems for Apartment, Hotel, Residential, Kitchen. Product range : Pipe & fittings Size : Dia 40 - Dia 160 mm Material : Three Layer ( Internal PP - POLIcomp, Middle PP – MD POLIcomp, External PP - POLIcomp Pressure Rating : Non Pressure Pipe (Drainage application) Operating Temp. : -10°C ÷ 95°C Jointing Method : Push and fit joint system Standard : EN1451, EN 14366 Certificate/Approval : SKZ, IBP, DeutschesInstitut Fur Bautechnik *Please refer to Technical Catalog for Detail Information
41. BUILDING PRODUCTS BUILDING Paling Rain Gutter System Paling Rain Gutter Systems has a unique invisible internal bracket, large effective cross section area (16.100 mm2) which will improve rain water flow, higher capacity and suitable for tropical country such as Indonesia. Leak proof, able to withstand thermal expansion and contraction (UV resistance), and also available in 3 different standard color. Application : Rainwater gutter Size : Gutter profile : 205 x 125 mm Rectangular pipe : 115 X 90 mm Material : UPVC Pressure Rating : Non pressure Systems (Drainage Application) Operating Temp. : Max 60oC Colour : Milky white, Trendy Grey, Bordeaux Maroon Jointing Method : Solvent Cement Standard : EN 607, EN 1462 Certificate/Approval : SIRIM *Please refer to Technical Catalog for Detail Information
42. BUILDING PRODUCTS BUILDING Paling Gully Trap Removable trap, easier and simple way to clean (from the same floor), easier solution for adding for collar for higher false ceiling, save cost, can receive up to 3 waste pipe connection without additional fittings, prevent insect, cockroaches and gases entering building. Application : For multi trap of waste pipes from sink/ wastage, shower and bath tub of any bath room Size : - Access size : 110 mm, - 1 outlet (D1=83),1mm, - 3 inlet (D2=56,0mm; D3=42,9mm; D4=42,9mm) Material : MuPVC Pressure Rating : Non pressure Systems Operating Temp. : Max. 60°C Jointing Method : Solvent cement Standard : BS EN 1253-1 Certificate/Approval : SIRIM *Please refer to Technical Catalog for Detail Information
43. BUILDING PRODUCTS BUILDING Siphonic Roof Drainage Systems Fast Flow Rain Water Down Pipe (RWDP) systems is new technology developed by Fast Flow Group. High capacity & efficient (pressure flow), Long term durability due to higher quality of material, Smaller and efficient gutters, Green – technology, achieve more with lesser material, 3 year warranty. Application : Small roof concreate (r.c) gutters and flat roofs for small to medium residential, bungalows, semidetached houses, terrace houses, small to medium factories, shop houses and small commercial developments, RumahToko (Ruko) Product range : psOutlet75 (for metal gutter & r.c), psOutlet100 (for metal gutters), psRWDP (Pipe&Fittings, 7 bars), psVent Size : 75 mm and 100 mm Material : UPVC Roof Outlet Cap. : psOutlet75 = 18 l/s, psOutlet100 = 20 l/s Pressure Rating : UPVC pipe = 7 bar Jointing Method : Solvent Cement Standard : JIS K 6739 (for fittings), Certificate/Approval : TUV, PSB, SIRIM
44. BUILDING PRODUCTS BUILDING Fast Flow Pressurized Systems Fast Flow Rain Water Down Pipe (RWDP) systems is new technology developed by Fast Flow Group. High capacity & efficient (pressure flow), Long term durability due to higher quality of material, Smaller and efficient gutters, Green – technology, achieve more with lesser material, 3 year warranty. Application : Small roof concrete (r.c) gutters and flat roofs for small to medium residential, bungalows, semidetached houses, terrace houses, small to medium factories, shop houses and small commercial developments, RumahToko (Ruko) Product range : psOutlet75 (for metal gutter & r.c), psOutlet100 (for metal gutters), psRWDP (Pipe&Fittings, 7 bars), psVent Size : 75 mm and 100 mm Material : UPVC Roof Outlet Cap. : psOutlet75 = 18 l/s, psOutlet100 = 20 l/s Pressure Rating : UPVC pipe = 7 bar Jointing Method : Solvent Cement Standard : JIS K 6739 (for fittings), Certificate/Approval : TUV, PSB, SIRIM *Please refer to Technical Catalog for Detail Information
46. UTILITY PRODUCTS UTILITIES POLYETHELENE (PE) PIPE PE 100 pipe is cost efficient pipe system to install, no corrosion in adverse soil condition, good chemical and abrasion resistance, flexible and light weight with a tolerance to ground movement . Application : Water pipelines distribution network Size : PN 10 d 25 - d 1000mm, PN 16 d 20 - d 630mm Material : PE 100 Pressure Rating : SDR 11 - 10 bar for gas & 16 bar for water, SDR 17 - 5,5 bar for gas & 10 bar for water. Operating Temp. : 0 - 20° C Jointing Method : Butt Fusion, Electro fusion, Mechanical Joint Standard : ISO 4427, Gas BS ISO 8085 Certificate : SGS, BSI *Please refer to Technical Catalog for Detail Information
47. UTILITY PRODUCTS UTILITIES ELECTRO FUSION FITTINGS For secure & reliable joining of PE pipe, no Pressure Reduction Factor (PRF= 1), faster jointing time, injection molded fabrication. Application : Water Product range : Coupler, Tee Equal, Reducer, Stub Flange, End Cap, Elbow 45O, Elbow 90O, Transitions Fittings, Branching Saddles Size : Dia 20 mm - Dia 500 mm Material : Polyethylene (PE) 100 Pressure Rating : SDR 11, Maximum 16 bar, Operating Temp. : 0 up to 20°c Jointing Method : Electro fusion Standard : ISO 4427, BS EN 12201, BS EN 13244, BS EN ISO 15494, WIS – 4-24-01, WIS – 4-32-08, WIS – 4-32-14, WIS – 4-32-15 Other Feature : 4,7 Terminal pin, 39.5 Volt Certificate : DVGW, IPP, Transco, WRAS, Kitemarks, Watermarks, SAI *Please refer to Technical Catalog for Detail Information
48. UTILITY PRODUCTS UTILITIES INJECTION MOLDED LONG SPIGOT FITTINGS For secure & reliable joining PE pipe, no Pressure Reduction Factor (PRF = 1), Injection molded (seamless), long spigot for electro fusion joining. Application : Water Product range : 90o Elbow, 45o Elbow, Tee equal, Tee reducer, Reducer, End Cap, Sub flange Size : dia 20 - dia 500mm Material : Polyethylene (PE) 100 Pressure Rating : SDR 11 - 16 bar for water, SDR 17 - 10 bar for water. Operating Temp. : 0 up to 20°c Jointing Method : Butt Fusion or electro fusion Standard : ISO 4427, BS EN 12201, BS EN 13244, BS EN ISO 15494, WIS – 4-24-01, WIS – 4-32-08, WIS – 4-32-14, WIS – 4-32-15 Certificate : DVGW, IPP, Transco, WRAS, Kitemarks, Watermarks, SAI *Please refer to Technical Catalog for Detail Information
49. UTILITY PRODUCTS UTILITIES COMPRESSION FITTINGS Philmac metric compression fitting revolutionizes PE pipe jointing technology. Built on slide & tighten technology, connecting PE pipe has never been faster or easier, 50 years design life, Application : Water Transportation, Mining Product Range : Joiner, Reducer, Elbow, End Cap, Tee equal, Tee Reducer Size : 3G MetricTM: 16mm - 63mm Full Bore : 75mm - 110mm Material : Black polyprophelene copolymer Pressure Rating : 16 bar Operating Temp. : 0 - 20°C Jointing Method : Mechanical Joint Standard : ISO 14236, AS/NZS4129 & 14236, AS/NZS 4020 BS6920, AS3688, WIS-4-32-11, ISO7.1 & BS21, AS/NZS4130, ISO4427,EN12201 Certificate /Approval : NSF, NATA, WRAS, SA *Please refer to Technical Catalog for Detail Information
50. UTILITY PRODUCTS UTILITIES COMPRESSION FITTINGS Astore PP Compression Fitting are joints for PE pipe dedicated to water transportation systems. Application : Water Transportation Size : 16mm - 110mm Material : Body and nut in polypropylene black co-polymer, clinching ring in white POM resin, O-ring in NBR, reinforcement ring in AISI 430. Presser bush (d.75, d.90, d.110) in polypropylene black co-polymer Pressure Rating : 16 bar from d.16 mm up to d. 63 mm 10 bar from d.75 mm up to d.110 mm Operating Temp. : 0 - 20°C Jointing Method : Mechanical Joint Standard : ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9562, UNI 9561, BS 5114/75 Certificate/Approval : DVGW, IQNet, IPP, SQP *Please refer to Technical Catalog for Detail Information
51. UTILITY PRODUCTS UTILITIES CLAMP SADDLE & FERRULE Astore clamp saddles are the ideal solution for house connection and branching from existing pipelines for water and irrigation. Combination of Astore clamp saddle and Philmac ferrule (Tapping Tee) make it suitable for house connection tapping for distribution water network. Application : Water & Irrigation Product Range : - Clamp Saddle Type 503 (Astore) - Clamp Saddle Type 505 (Astore) - Clamp Saddle (Philmac) - Ferrule Type (Philmac) Size : Material : Body saddle in polypropylene black co-polymer , nuts and bolts in zinc chromed steel, o-ring in NBR, reinforcing ring in AISI 430 Pressure Rating : 6 - 10 bars (Astore), 16 Bar (Philmac) Operating Temp. : 0 - 20°C Jointing Method : Mechanical Joint Standard : DIN 2999 Certificate/Approval : DVGW, IQNet, IPP, SQP *Please refer to Technical Catalog for Detail Information
52.
53. Product Range : Low volume under clamping tees and Medium volume under tapping tees
59. UTILITY PRODUCTS UTILITIES PE-100 BALL VALVE ¼ turn ball valve, maintenance free, no internal metal parts, no corrosion, longer live time (min 50 years), smooth bore for excellent flow ability, minimum leakage due to butt fusion or electro fusion joining. Application : Water distribution network Product Range : Reduced Port and Full Port Ball Valve Size : - Dia 32 mm - Dia 225 mm for Reduced Port Ball valve - Dia 32 mm - Dia 125 mm for Full Port Ball valve Material : PE 100 (Black) Pressure Rating : SDR 11-16 Bar for Water Operating Temp. : 0 - 20° C Jointing Method : Butt Fusion or Electro fusion Standard : EN 1555, EN 12201, ACS Registered Certificate : *Please refer to Technical Catalog for Detail Information
73. Untuk instalasi horizontal (atau vertikal kelas B)Siapuntuk AMR / Pembacaan Dari KomputerDenganSistem MBUS atau Radio Frequency
74. UTILITY PRODUCTS UTILITIES WOLTEX WOLTMAG FLOSTAR-M Vertical Woltmann Kelas B (Horizontal) 50mm (2”) – 100mm (4”) Siap Untuk AMR Didesain Untuk Menahan Efek “water hammer” Single Jet Kelas C (Horizontal) 40mm (1.5”) – 100mm (4”) Siap Untuk AMR Horizontal Woltmann Kelas B semua posisi 50mm (2”) – 500mm (20”) Siap Untuk AMR
75. UTILITY PRODUCTS UTILITIES Segel Kopling (Coupling Seal) – Pada Posisi Inlet dan Outlet Non-Return-Valve (NRV) untuk 15mm & 20mm – Dipasang Di Pabrik Outlet
76. UTILITY PRODUCTS UTILITIES Strainer / Filter Flow straighteners S3D – RJ1 T- Strainer 50mm (2”) – 500mm (20”) Meluruskan aliran air Headloss rendah 50mm (2”) – 200mm (8”) Mudah Dibersihkan Stainless steel filter Headloss rendah
80. UTILITY PRODUCTS Automatic Meter Reading (AMR) UTILITIES More water meters Other Device with pulse-output 3rd fl. Cable : Copper Twisted-pair 0.6 or 0.8mm 2nd fl. Another 250 un or 1km cable length 1st fl. Max. 250 un or 1km cable length Concentrator Concentrator More Concentrator Concentrator PC with MBUSREAD RS232
81. UTILITY PRODUCTS AutomaticMeterReading (AMR) UTILITIES Tampilan Software berupadaftarpelanggan yang dapatdibacakeseluruhanataupunsatu per satutergantungkeinginan operator Hasilpembacaandapatdiubahkedalambentuk MS Excel
82. UTILITY PRODUCTS Automatic Meter Reading (AMR) UTILITIES Pembacaandari Control Room di Basement 887 unit Multimag ½“ & ¾“ dengan Cyble M-Bus di Bellagio Residence, Jakarta
83. UTILITY PRODUCTS Automatic Meter Reading (AMR) UTILITIES 240 Aquadis ¾” & 1” denganCyble MBUS di Pearl Garden, Jakarta
103. Meter with Cyble FDC = 90 Collector = 11 Access Point = 1 UTILITY PRODUCTS Simulasi RF - EverBlu UTILITIES ±420m ±750m
104. +200 [m] +200 [m] UTILITY PRODUCTS ContohJarakPembacaanCyble RF diLapangan UTILITIES Meter di dalam bak tertutup plat besi Bisa dibaca dari atas fly-over (+- 300m)
109. UTILITY PRODUCTS WaterMind Analyzer UTILITIES LCD display Indikator signal GSM Tombol untuk pembacaan/ programming diproteksi password Alternatif program data di lapangan melalui laptop Batere Lithium berkekuatan hingga 5 tahun, dapat diganti GSM Modem internal GSM SIM Card
110. Perbandingan Antara Konsumsi Aktual & Aliran Meter Air Informasi Pelanggan & Meter Berdasarkan Volume / Waktu Alarm 10 Hari Terakhir: Aliran Mundur, Meter Stop, Leakage, dll. Detil Konsumsi Harian / Per Jam UTILITY PRODUCTS UTILITIES WaterMind Supervisor Software
113. UTILITY PRODUCTS UTILITIES EURIDIS System For Buildings – Water & Gas Meter Reading Lantai 3, dst kWh Meter Gas Meter Euridis module for Gas 2nd fl. Euridis module for Water Water Meter 1st fl. Euridis module for Water Kabel: Copper Twisted-pair 0.6 or 0.8mm Tower 2 Tower 4, dst Tower 3 Magnetig Plug Data Collector Kapasitas Magnetic Plug Data Collector: Maksimum 100 unit atau panjang kabel 500m Panel Komputer dengan Software Reading Koneksi USB Di dalam Panel Intranet atau TCP/IP Komputer di Central Control Room
115. OIL, GAS & MINING PRODUCTS POLYETHELENE (PE) PIPE High performance Polyethylene solutions from GPS are manufactured to meet the exacting standards imposed by National and International Gas bodies. PE 100 pipe is cost efficient pipe system to install, no corrosion in adverse soil condition, good chemical and abrasion resistance, flexible and light weight with a tolerance to ground movement . Application : Gas distribution network Size : d 20 - d 630mm Material : PE 100, PE 80 Pressure Rating : max. 7 Bars (SDR 11) max. 4 Bars (SDR 17.6) Operating Temp. : 0 - 20° C Jointing Method : Butt Fusion, Electro fusion, Mechanical Joint Standard : ISO 4437 , BS EN ISO 8085: 2001 – Part 1, 2 and 3, EN 1555, GIS/PL2 – Part 2,4 and 6, GIS/PL3 – 2006, ISO 10838 – Part 1 and 2, ISO 12176 – Part4 ASTM 1055, CSA Certificate/Approval : SGS, BSI Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
116. OIL, GAS & MINING PRODUCTS COMPRESSION FITTINGS Philmac metric compression fitting revolutionizes PE pipe jointing technology. Built on slide & tighten technology, connecting PE pipe has never been faster or easier, 50 years design life Application : Water Lines Product Range : Joiner, Reducer, Elbow, End Cap, Tee equal, Tee Reducer Size : 3G MetricTM: 16mm - 63mm Full Bore : 75mm - 110mm Material : Black polyprophelene copolymer Pressure Rating : 16 bar Operating Temp. : 0 - 20°C Jointing Method : Mechanical Joint Standard : ISO 14236, AS/NZS4129 & 14236, AS/NZS 4020 BS6920, AS3688, WIS-4-32-11, ISO7.1 & BS21, AS/NZS4130, ISO4427,EN12201 Certificate /Approval : NSF, NATA, WRAS, SA Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
117. OIL, GAS & MINING PRODUCTS ELECTRO FUSION FITTINGS For secure & reliable joining of PE pipe, no Pressure Reduction Factor (PRF=1), faster jointing time, injection molded fabrication (no machining process) Application : Gas & Water Lines Product Range : Coupler, Tee Equal, Reducer, End Cap, Elbow 45O, Elbow 90O, Transitions Fittings, Branching Saddles Size : Dia 20 mm - Dia 500 mm Material : PE 100 (Black) Pressure Rating : For Gas : SDR 11 (10 Bars), For water SDR 11 (16 Bars) Operating Temp. : 0 - 20°C Jointing Method : Electro fusion Standard : ISO 4437 , BS EN ISO 8085: 2001 – Part 1, 2 and 3, EN 1555, GIS/PL2 – Part 2,4 and 6, GIS/PL3 – 2006, ISO 10838 – Part 1 and 2, ISO 12176 – Part4 ASTM 1055, CSA Other Feature : 4,7 Terminal pin, 39.5 Volt Certificate/Approval : DVGW, IPP, Transco, WRAS, Kitemarks, Watermarks, SAI Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
118. OIL, GAS & MINING PRODUCTS INJECTION MOLDED LONG SPIGOT FITTINGS For secure & reliable joining PE pipe, no Pressure Reduction Factor (PRF = 1), Injection molded (seamless), long spigot for electro fusion joining. Application : Gas & Water Lines Product Range : 90o Elbow, 45o Elbow, Tee equal, Tee reducer, Reducer, End Cap, Sub flange Size : Dia 20 mm - Dia 500 mm Material : PE 100 (Black) Pressure Rating : For Gas : SDR 11 (10 Bars), SDR 17 (5.5 Bars) For Water : SDR 11 (16 Bars), SDR 17 (10 Bars) Operating Temp. : 0 - 20°C Jointing Method : Electro fusion and Butt Fusion Standard : ISO 4437 , BS EN ISO 8085: 2001 – Part 1, 2 and 3, EN 1555, GIS/PL2 – Part 2,4 and 6, GIS/PL3 – 2006, ISO 10838 – Part 1 and 2, ISO 12176 – Part4 ASTM 1055, CSA Certificate /Approval : DVGW, IPP, Transco, WRAS, Kitemarks, Watermarks, SAI Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
119. OIL, GAS & MINING PRODUCTS PE-100 BALL VALVE ¼ turn ball valve, maintenance free, no internal metal parts, no corrosion, longer live time (min 50 years), smooth bore for excellent flow ability, no leakage due to proper butt fusion or electro fusion joining. Application : Gas and water lines Product Range : Reduced Port and Full Port Ball Valve Size : - Dia 32 mm - Dia 225 mm for Reduced Port Ball valve - Dia 32 mm - Dia 125 mm for Full Port Ball valve Material : PE 100 (Black) Pressure Rating : For Gas : SDR 11 (10 Bars) For Water : SDR 11 (16 Bars) Operating Temp. : 0 - 20°C Jointing Method : Butt Fusion or Electro fusion Standard : EN 1555, EN 12201, ACS Registered Certificate /Approval : DVGW, IIP, Transco, WRAS, Kitemarks, Watermarks, SAI Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
120. OIL, GAS & MINING PRODUCTS TAPPING TEES ELECTROFUSION For secure and reliable house connection and branches systems, no leakage, no external metal part, no corrosion, longer life time (min 50 year), for drilling above under full operating pressure. Application : House connection or branches of gas or water lines Product Range : Low volume under clamping tees and Medium volume under tapping tees Size : - Dia 40 -160 mm with Dia 25 and 32 mm outlet branch for Low volume - Dia 60 -180 mm with Dia 32 and 40 mm outlet branch for medium volume Material : PE 100 (Black) Pressure Rating : For Gas : SDR 11 (10 Bars) For Water : SDR 11 (16 Bars) Operating Temp. : 0 - 20°C Jointing Method : Electro fusion Other Feature : 4,7 Terminal pin, 39.5 Volt Standard : ISO 4437 , BS EN ISO 8085: 2001 – Part 1, 2 and 3, EN 1555, GIS/PL2 – Part 2,4 and 6, GIS/PL3 – 2006, ISO 10838 – Part 1 and 2, ISO 12176 – Part4 ASTM 1055, CSA Certificate /Approval : DVGW, IPP, Transco, WRAS, Kitemarks, Watermarks, SAI Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
121. OIL, GAS & MINING PRODUCTS VALVE & ACCESSORIES Automatic soft sealing system, Body seat wear and corrosion resistance due to nickle/stainless steel welded overlay (micro finished), Double offet disk, sealing ring can be replaced without dismantling the disk. Application : For Gas pipelines and Gas Plant Product Range : Double Flange Butterfly Valve (Epoxy), Double Flange Butterfly Valve (Steel Welded) Size : Dia 150 - DN 2400 mm (> 2400 mm on request) Material : Body & Disk (GGG 40), Shaft (stainless steel), O-ring and Sealing (NBR) Pressure Rating : PN 10 and PN 16 Jointing Method : Flange Standard : EN 953, DIN 30690, EN 12266 (For Final Inspection Test) Certificate : DVGW, GSK Oil, Gas & Mining *Please refer to Technical Catalog for Detail Information
123. TOOLS & WELDING MACHINE PRODUCTS NEW DELTA DRAGON ASIA BUTT FUSION MACHINE TOOLS & WELDING MACHINES New Delta Dragon Asia is distinguished by excellent quality – price ratio, while maintaining reliability, precision and ease to used, along with Ritmo standards. Dedicated designed and produced for Asian market. Application : To joint PE, PP, PVDF material. Suitable for pressure systems (gas, water and other fluids under pressure) Product Range : Machine Body, Electro-hydraulic gearcase, Hydraulic hoses for gearcase, Milling Cutter, Heating plate, Milling Cutter & Heating Plate Support, Complete Reduction Set Special Feature : Type/Working range/Power : Delta “Dragon Asia” SL-TM 160/ø 40mm÷160mm/1820 W Delta “Dragon Asia” SL-TM 250/ø 75mm÷250mm/3080 W Delta “Dragon Asia” SL-TM 315/ø 90mm÷315mm/4110 W Voltage : 230 Volt - single phase - 50/60 Hz Standard : UNI 10565, ISO 12176-1 Certificate/Approval : SINCERT
124. TOOLS & WELDING MACHINE PRODUCTS DELTA DRAGON BUTT FUSION MACHINE TOOLS & WELDING MACHINES Application : To joint HDPE, PP, PB, PVDF material. Suitable for pressure systems (gas, water and other fluids under pressure) Product Range : Standard : Machine body, Electro hydraulic Gear case, Milling cutter, Heating plate, Milling & Heating Support, Reduction set. On request :Machine Body Trolley, Tools for flange neck, Electrical crane Type/ Working range/Power : Delta Dragon 355 B (ø 125mm ÷ 355mm) 5800 W Delta Dragon 500 (ø 200mm ÷ 500mm) 7950 W Delta Dragon 630 (ø 355mm ÷ 630mm) 11412 W Delta Dragon 800 (ø 500mm ÷ 800mm) 16416 W Delta Dragon 1000 (ø 630mm ÷ 1000mm) 24096 W Delta Dragon 1200 (ø 710mm ÷ 1200mm) 28196 W Delta Dragon 1400 (ø 800mm ÷ 1400mm) 39000 W Voltage : (Delta Dragon 355 - 500) : 230 Volt, single phase, 50/60Hz (Delta Dragon 630 - 1400) : 400 Volt, three phase, 50/60Hz Standard : UNI 10565, ISO 12176-1 Certificate/Approval : SINCERT
125. TOOLS & WELDING MACHINE PRODUCTS DELTA DRAGON ALL TERRAIN BUTT FUSION MACHINES TOOLS & WELDING MACHINES The DELTA ALL TERRAIN is an independent and motorized electro-hydraulic butt fusion machine. The machine is designed for in-field fusion of HDPE pipe and fittings and other plastic pipes. The Delta All Terrain is provided with Ritmo's unique and innovative programming and control system, Easy-Life. The Easy Life system permits the operator to program and perform all the fusion procedures quickly and easily. The program/control panel allows the operator to set the machine for heating temperature, facing pressure, heating time, soaking time, fusion pressure, fusion time, and cooling time Application : To joint PE &PP material. Suitable for pressure systems (gas, water and other fluids under pressure) Product Range : Generator on board, easy life control system, GPS, milling cutter heating plate with support, Reduction Set Type/ Working range : Delta 250 Trailer (ø 75mm÷250mm) 4200 W Delta Dragon 355 All Terrain (ø 125mm÷355mm) 14150 W Delta Dragon 630 All Terrain (ø 355mm÷630mm) 24096 W Voltage : 230 Volt – single phase - 50/60 Hz 400 Volt – three phase - 50/60 Hz Standard : UNI 10565, ISO 12176-1 Certificate/Approval : SINCERT
126. TOOLS & WELDING MACHINE PRODUCTS NEW ELEKTRA ELECTROFUSION MACHINES TOOLS & WELDING MACHINES Application : Elektra is an universal electrofusion machine, suitable for welding PE and PP couplings (from 8 to 48 V) Type/Working range/Power : Elektra 400 entry (ø 20mm÷400mm) 2700 W Elektra 400 (ø 20mm÷400mm) 2700 W Elektra 800 (ø 20mm÷800mm) 3500 W Voltage : (Elektra 400 entry) 230 V, 50/60 Hz (Elektra 400) 230 V, 50/60 Hz (Elektra 800) 230 V, 50/60 Hz Standard : Certificate/ Approval : SINCERT
127. TOOLS & WELDING MACHINE PRODUCTS SOCKET FUSION MACHINE TOOLS & WELDING MACHINES Application : Manual socket welders for joining pipes and fittings, in compliance with the standards in force. They feature an aluminum heating plate and a practical, heat-insulated plastic handle. They can weld PE, PP, PP-R, PVDF pipes and fittings, and they’re characterized by different shapes and working ranges, suitable for different applications. Product Range : R 25 TE, R 63 TE, R 125 Q TE Working Temperature : TE: 180° ÷ 290° C Ambient temperature : -5÷ + 40°C Max Diameter/Power : R 25 TE (25mm) 500 W R 63 TE (63mm) 800 W R 125 Q TE (125mm) 1400 W Voltage : 230V - single phase - 50/60 Hz Standard : Certificate/ Approval : SINCERT
128. TOOLS & WELDING MACHINE PRODUCTS STARGUN SB SERIES TOOLS & WELDING MACHINES Hand extruder, portable, compact and handy, for fabrication and welding of pipes, sheets and plastic parts in HDPE, PP. Application : STARGUN machines are used for the fabrication of containing tanks, fume treatment towers, scrubbers, chemical hoods, aspiration systems, and for joining linings and geo- textiles. Standard : Certificate/ Approval : SINCERT
129. TOOLS & WELDING MACHINE PRODUCTS PIPE CUTTERS TOOLS & WELDING MACHINES Application : These are professional tools, essential for the manual cut of plastic pipes up to Ø 315 mm. The TC 108, T1, TU 75, TU 140, T3 and T4 pipe cutters are made with the very best alloys, and are very manageable and practical to use. Product Range : TC 108, T1, TU 140, T3, T4 Material : Cu, PEX/AI, PP/AI, PE, PP, PPR, PB, PVDF Type/Working range : TC 108 (ø 6mm÷ 50mm) T1 (ø 6mm÷ 64mm) TU 140 (ø 50mm÷ 140mm) T3 (ø 100mm÷ 160mm) T4 (ø 180mm÷ 315mm) Cutting Depth : 3mm, 5mm, 14,3mm, 17,2mm, 19,4mm Blade Type : ø18mm, ø22mm, ø44mm, ø50mm, ø53mm. Standard : Certificate/Approval : SINCERT
130. TOOLS & WELDING MACHINE PRODUCTS ROLLERS TOOLS & WELDING MACHINES Application: This device is essential for supporting the pipes while they are being welded with the DELTA machines. The rollers minimize pipe friction and drag force no matter which is the construction site condition. Product Range: Lightweight Roller Unit, 560Roller Unit, 1600 Roller Unit Type/ Working range: Lightweight Roller Unit (Max ø 315mm) 560Roller Unit (Max ø 560mm) 1600 Roller Unit (Max ø 1600mm) Overall dimension (W x D x H) : 400 x 290 x 240 mm 900 x 690 x 450 mm 920 x 730 x 520 mm Certificate/ Approval : SINCERT
131. TOOLS & WELDING MACHINE PRODUCTS PIPE SUPPORT TOOLS & WELDING MACHINES Application : With this practical piece of equipment, the pipe can be locked to let the operator carry out quickly and with precision all operations previous to the welding cycle, like cutting, pickling, scraping, etc. Product Range : Pipe Support, Locking system Working range : ø 40mm÷400mm Dimension (W x D x H) : While being transported: 870 x 365 x 785 mm While being used (lowest position): 630 x 365 x 760 mm While being used (highest position): 1100 x 365 x 660 mm Weight : 15,00 Kg Certificate/ Approval : SINCERT
132. TOOLS & WELDING MACHINE PRODUCTS PIPE SHARES TOOLS & WELDING MACHINES Application : These are professional tools, essential for the manual cut of plastic pipes, such as Polypropylene (PP) and Polypropylene Random (PP-R) up to PN 25, Polyethylene (PE), Polybutelene /PB) and Polyvynyldifluoride (PVDF) up to Ø 75 mm. Type/Working range/ : C2 (Max ø 42 mm) 0,35 kg Weight C2 AC (Max ø 43 mm) 0,51 kg CD (Max ø 51 mm) 0,55 kg C3 AC (Max ø 75 mm) 2,70 kg Overall dimensions : 120 x 25 x 220 mm 120 x 25 x 225 mm 95 x 25 x 230 mm 170 x 35 x 520 mm Certificate/ Approval : SINCERT
133. TOOLS & WELDING MACHINE PRODUCTS BEVELERS TOOLS & WELDING MACHINES Application : These are professional tools, essential for the manual cut of plastic pipes, such as Polypropylene (PP) and Polypropylene Random (PP-R) up to PN 25, Polyethylene (PE), Polybutene /PB) and Polyvynyldifluoride (PVDF) up to Ø 75 mm. Product Range : SME 0, SME 1, SME 2-PLUS Material : PE, PP, PB, PVDF, PVC Type/ Working Range : SME 0 (ø25 ÷ 75 mm) 0,70 kg SME 1 (ø25 ÷ 160 mm) 0,80 kg SME 2-PLUS (ø40 ÷ 250 mm) 1,40 kg Overall dimensions : 76 x 107 x 249 mm 76 x 107 x 240 mm 195 x 140 x 330mm Certificate/ Approval : SINCERT Weight
134. TOOLS & WELDING MACHINE PRODUCTS PIPE SCRAPPER TOOLS & WELDING MACHINES Application : These professional rotary scrapers, designed and patented by Ritmo, are essential to prepare the plastic pipes and fittings before electrofusion welding. Practical and handy, the pipe scrapers remove the oxidation layer caused by weather and ultraviolet rays. If not removed, the oxidation layer would severely compromise the quality of the joint. Type/Working Range : PS 180 Internal: ø 61÷180 mm, External: ø75÷200 mm RTC 160 Internal: ø 38÷154 mm, External: ø50÷160 mm RTC 315 Internal: ø 58÷300 mm, External: ø75÷315 mm RTC 710 Internal: ø290÷675 mm, External: ø355÷710 mm Scraping Length : Max. 129 min 120, 70 mm, 137 mm, 530 mm Certificate/ Approval : SINCERT
135. TOOLS & WELDING MACHINE PRODUCTS PIPE ALIGNER TOOLS & WELDING MACHINES Application : This professional tool is essential to hold pipes still and aligned during electrofusion. The UNIVERSAL ALIGNER 63 is made almost entirely in a special Aluminum alloy and features a central joint for the fixed positions at 45° and 90°, four self-centring clamps that require no adapters. Product Range : RTC 160, RTC 315, RTC 710 Working Range : Internal : ø50 ÷ 160 mm, ø75 ÷ 315 mm, ø355 ÷ 710 mm External : ø38 ÷ 154 mm, ø58 ÷ 300 mm, ø290 ÷ 675 mm Dimension : 380x120x250 mm, 510x310x410 mm, 595x272x190 mm Weight : 2,50 kg, 4,50 kg, 16,00 kg