1. Fawzi S Shammari
Saudi Arabia, Ras Tanura 2431, 31311
Ph: 00966555886522
FAWZI.SHAMMARY@ARAMCO.COM
arab25@gmail.com
Skills:
More than 22 Years of excellent experience in most of process
control system and instrumentation types. Able to perform
specialized installation, diagnosis and repair on all types of
digital, analog, signal, Foundation Fieldbus, HART, Profibus, and
pneumatic instrumentation systems, maintain, repair and
optimize all control equipment in the area assigned for both
field-based and control room- based
Shutdown, Start-up sequence checking, monitoring the status
in DCS and answer back conformation
Lead maintenance Team to carry out Instrument calibration
and Process control systems. Ensure instrument installation
according to standard. Overhauling all types of Control Valve
and ZVs
Many courses about management skills for maintenance
leadership and plant maintenance planner.
Familiarity about several kind of unsafe concerned in working
area and necessary safety measure to be done for the safe
work.
Test malfunctioning machinery and discusses malfunction with
other team members, to diagnose malfunction. Perform any
other job-related tasks.
Locate system and equipment faults by making the necessary
diagnostic tests, measurements and analyses
Review and implements new work & upgrade projects as per
engineering packages
Capable of tracing ESD loops, VMS, CCC and any sub-system
like M.C.C., analysis devices etc., calibrating various control
instruments. Capable of troubleshooting control loops in the
field and through the DCS system. Capable of tracing
instrument faults in pumps, compressors, boilers and furnaces

2. Experience in case study of plant and modification
implementation to avoid failure repetition
Perform high-skilled diagnostic tasks on all kinds of
instrumentation as required. Prepare new or altered
installations on all types of equipment, then test runs for
acceptance. Respond effectively to emergency fault
conditions. Perform emergency field repairs.
Good knowledge and experience on Process Control and ESD
system Hardware/software for installation, troubleshoot, P.M.,
and replacement of TDC3000, C300 Experion Honeywell,
CS3000 Yokogawa DCS, VMS Bently Nevada 3300/3500, Trend
master DSM, Experion SM, TMR Triconex Invensys, Yokogawa
SCS ESD, Woodward MicroNet, 5009FT, Peak 150, 505E, Tricon
CCS and CCC.
Experience on some maintenance programs like Yokogawa
PRM, Bently Nevada System 1, and Valve Link Program
Experience on most industrial communication, Foundation
Fieldbus, Profibus, and Hart communication system
Effective corrective maintenance at breakdown period in ESD
system, complex loop logic and replacement of I/O and
associated modules.
Experience of Fire & Gas System H2S/LEL Detectors and Smoke
Detectors, motor controls, VFD's, DC drives Adjustable
Frequency Drives system (AFD) etc.
Attended for inspection many of FAT and SAT installation,
Loop Checking, troubleshooting, Pre-Commissioning,
commissioning and start up plant.
Shutdown, Start-up sequence checking, monitoring the status
in DCS and answer back conformation
Lead maintenance Team to carry out Instrument calibration
and Process control systems.
Ensure instrument installation according to standard

3. Experience
SR Process Control System and Instrumentation Tech, Sep 1992 - Present
Saudi Aramco-Jubail,
I am presently working at WASIT Gas Plant Project (a huge gas project) as instrument, electrical
and process control system group supervisor, I’ve had a strong interest in my job for a long time
and I’ve learned as much as I can about it. I believe my skills would be valuable.
I have excellent knowledge and experience to perform maintenance on all types of field process
measurements and process control systems. Skilled at performing calibration, troubleshooting,
installation, fault location, repair, and optimize all control equipment for both field-based and
control room- based. Familiar with FAT, SAT, commissioning, and Test Reports as per standard
and capable of Loop Check procedures with all requirements. Carry out loop functional test and
ensure devices installation according to standard.
I worked in many of new projects, system hot cut-over, migration, upgrading, and
commissioning in refining, NGL fractionation, power plants, utilities, oil product facilities, oil and
gas storage, product pumping, Local sales plants etc.
I am always handling my job with great responsibility and integrity, able to perform under
stress, and I believe in team work. Carry out any other job-related tasks and I also have an
experience in learning and excelling at new technologies as needed
Plan and direct activities such as sales promotions, coordinating with other department heads
as required. Manage the movement of goods into and out of production facilities.
Courses
Special courses for control system, leadership, and safety
Original Equipment manufacturer courses