I am the authorized K-12 representative in South Carolina for eInstruction by Turning Point. Bill McIntosh SchoolVision Inc.. Authorized K-12 Consultant for eInstruction by Turning Technologies Phone :843-442-8888 Email :WKMcIntosh@Comcast.net Twitter : @OtisTMcIntosh SchoolVision Website on Facebook: https://www.facebook.com/WKMIII Website : www.einstruction.com Stay Connected - @eInstruction • Facebook Turning Technologies | 255 West Federal Street | Youngstown, OH Main: 330-746-3015 | Toll Free: 866-746-3015 | Fax: 330-884-6065 www.TurningTechnologies.com

1. Wireless Kit for Touch Board Plus 1
WIRELESS KIT FOR TOUCH BOARD PLUS
Turning Technologies Device Manager version 7.3 or higher must be installed on your computer prior to installing the Wireless
Kit.
Device Manager is automatically installed with the following software: WorkSpace (v.9.4) and Flow (v.2.0).
The MultiHub plugs into a USB port on your computer or a powered USB Hub. The RFCOM (Radio Frequency Communicator)
plugs into a wall outlet while positioned in the RFCOM clip that slips over the frame at the side of the Touch Board.
Connecting the Touch Board Plus
Turning Technologies Device Manager version 7.3 or higher must be installed on your computer prior to installing the Wireless
Kit.
The MultiHub plugs into a USB port on your computer or a powered USB Hub. The RFCOM (Radio Frequency Communicator)
plugs into a wall outlet while positioned in the RFCOM clip that slips over the frame at the side of the Touch Board Plus.
1 Slide the plastic gray clip over the frame at the side of the Touch Board Plus.
2 Seat the RFCOM into the plastic gray clip.
3 Connect the appropriate end of the power cord into the power cord terminal and the opposite end into a nearby wall
outlet.
4 Connect the USB cable from the Touch Board Plus to the RFCOM .
5 Turn on the RFCOM power switch . The amber light will turn on to show a successful connection to the Touch
Board Plus.
6 Plug the MultiHub into a working USB port on your computer or a powered USB hub.
7 Press the pairing button on the MultiHub. The blue light will begin to blink.
8 Press the pairing button on the RFCOM.
IMPORTANT
You have two minutes to press the pairing button.
When the two devices have been successfully paired, the blue light on the RFCOM will stop blinking and remain a solid
blue. The light will dim when connection to the MultiHub is lost.
Pairing the device is a one-time operation.
turningtechnologies.com/user-guides

2. Wireless Kit for Touch Board Plus 2
Regulatory Statements Declaration of Conformity
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard
(s). Operation is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
European Union Emission Directive
This product is in conformity with the protection requirements of EU
Council Directive 89/366/ECC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class
A Information Technology Equipment according to CISPR 22/European
Standard EN55022. The limits for Class A equipment were derived for
typical industrial environments to provide reasonable protection against
interference with licensed communication devices.
European Union WEEE Directive
This product is in conformity with the protection requirements of EU
Council Directive 89/366/ECC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class
A Information Technology Equipment according to CISPR 22/European
Standard EN55022. The limits for Class A equipment were derived for
typical industrial environments to provide reasonable protection against
interference with licensed communication devices.
Manufacturer's Name:
Turning Technologies, LLC/DBA eInstruction
Manufacturer's HQ Address:
255 West Federal Street, Youngstown, Ohio 44503 U.S.A.
European Address:
26/36 rue Alfred Nobel, 93600 Aulnay Sous Bois, France
Phone:
+33 1 58 31 10 60 Fax: +33 1 58 31 10 69
declares, that the product
Product Names:
Wireless Kit for Touch Board
Regulatory Model #:
TBRF-01 USB RF Hub= H4 RFCOM= B4
FCC ID:
CTW-MOBI
IC:
4524A-MOBI
Conforms to the following specifications:
EMC: EN 301 489-1, EN 301 489-17 & ETSI/EN 301 489-3.
EN 300-328 V1.7.1,
EN55022:2006 and A1:2007
EN55024:1998+A1;2001+A2:2003
EN 61000-3-2:2006 ; EN 61000-3-3:2008
EN 61000-4-2:2009 ; EN 61000-4-3:2006
EN 61000-4-4:2004+A1:2010
EN 61000-4-5:2006; EN 61000-4-6:2009
EN 61000-4-11:2004; FCC Part 15B Class A Digital Device RSS-210
CE Marking: This product carries the Mark indicating compliance
according to 2004/108/EC.
RoHS: “-R” labeled products conform to Directive 2011/65/EU (Directive
2002/95/EC). These products are RoHS-compliant.
Ohio
255 West Federal Street
Youngstown, Ohio 44503
Toll-Free: 866.746.3015
International: +1.330.746.3015
Paris
26/36 rue Alfred Nobel
93600 Aulnay-sous-Bois
Support: +33 1.58.31.10.65
Belfast
19 Colvin House
Inspire Business Park
Carrowreagh Road
Belfast BT16 1QT, UK
Direct: +44 (0)28 9048 7898
Amsterdam
Keizersgracht 75, Garden
1015 CE, Amsterdam
The Netherlands
Toll-Free: +31 (0)85 4011 040
© 2014 Turning Technologies
turningtechnologies.com/user-guides