sistema lutron

1. Quantum total light management
™
Improves comfort and productivity
while saving energy

2. “We designed our building to use
1.28 Watts per square foot of lighting
power. With Quantum , it’s only ™
using 0.38 — that’s 70% less.”
Glenn Hughes, Director of Construction for
The New York Times Company during design, installation,
and commissioning of The New York Times Building
This facility saves over $315,000 each
year by managing light with Quantum.
The New York Times, New York, New York, USA
Green Facts
Buildings 1
Square Feet 600,000 sq. ft.
Lighting Fixtures 15,000
Lighting Energy Savings 70%
Annual CO2 Reduction 1,250 metric tons
© Photo by Nic Lehoux

3. The challenge:
Optimize electric light and daylight What does Quantum™ do?
to save energy and create a productive,
comfortable, visual environment. Quantum prevents wasted lighting energy
by maximizing the efficient use of light
Most buildings today are over-lighted because in your building. Quantum automatically
there is enough daylight in the space; or lights dims or switches all electric lighting and
are set to a higher level than appropriate for the controls daylight using automated window
people inside; or spaces are lighted even though shades. Quantum manages, monitors,
they are unoccupied. This wastes energy, creates and reports on all the lighting usage in your
discomfort, and reduces productivity. building for optimal energy performance
and productivity while minimizing
maintenance and operating costs.
The solution:
What are the benefits?
Manage light with Quantum.
Save electricity and protect
Quantum manages both electric light the environment
and daylight, to not only save energy Reduces greenhouse gases by
and simplify operations but also improve eliminating unnecessary energy use
the comfort and productivity of the
people in your building.
Save money
Lowers operating costs and peak
demand charges
The cost of waiting:
Create a more flexible space
A typical 50,000 sq. ft. commercial Lighting and shading zones can be
building spends about $45,000 each re-configured without rewiring
year on lighting energy. 1
Increase productivity and comfort
Much of that money is wasted due to
Makes occupants more productive
ineffective light control. Through optimizing
and comfortable with preferred light
electric light and daylight, Quantum can cut
levels and automated shade control
those costs by 60% or more while greatly
improving the visual environment.
Where is Quantum used?
• office, education, healthcare, hospitality
and other buildings
• for new construction or renovations
1 Source: The New Thinking About Lighting,
Building Operating Management, August 2008. Lutron | 01

4. Benefits of Quantum total light management ™
Save electricity
and protect the Save money
environment
More electricity is used for lighting than Lower operating and maintenance costs.
any other building system. Controlling your • automatically turn off lights in vacant spaces
lighting is usually the easiest and most visible • use only the amount of electric light needed
way to manage your energy costs while • minimize electricity demand charges by lowering
enhancing your space. light levels during peak periods
• reduce lighting and HVAC loads by dimming
Light control strategies such as tuning, lights and automatically controlling shades
dimming, occupancy sensing, daylight • report lamp failures for optimal group re-lamping
harvesting, scheduling, and automatic
shading reduce energy consumption which
conserves natural resources and lowers
the amount of CO2 released into the air.
Annual electricity use in office buildings 1
44% Lighting
24% Office Equipment
14% Space Cooling
8% Ventilation
8% Other
3% Space Heating
protect the environment save electricity and money
Source:
1 Energy Information Administration, 1995 Commercial
02 | Lutron Buildings Energy Consumption Survey, released
September 2000.

5. Create a more Increase productivity
flexible space and comfort
Easily control and re-configure light sources. 2 Make your tenants or employees more
Lighting and shading zones can be re-configured productive with selectable preferred light
without rewiring, making a space adaptable to high levels for specific tasks. Since 90% of
churn rates. As the needs of a space change, wall information is received visually, having the right
controls, occupancy sensors, and daylight sensors light for the job is crucial. Research indicates that
can be reassigned to different fixtures or groups people are 4% – 7% more productive working
of fixtures. Furthermore, the Quantum™ system in their preferred light level. 3 This equates to
is expandable from small, stand-alone spaces, 10 – 17 extra work days per employee per year.
to whole floors, to the whole building or campus. Furthermore, Quantum™ shade control eliminates
harsh sun glare and heat making employees more
productive and comfortable.
more flexible space increase productivity
Sources:
2 Incandescent, fluorescent, LED, CFL, halogen, and neon/cold cathode.
3 Determinants of Lighting Quality II by Newsham, G. and Veitch, J., 1996. Lutron | 03

6. Key components of Quantum ™
total light management
EcoSystem ®
electric lighting controls + Sivoia QS ®
daylight controls
E S t
EcoSystem Fluorescent Dimming B ll t
Fl t Di i Ballast Shades
• sets light level to your task • reduce sun glare and solar heat
(100% to 10% dimming) gain for increased productivity,
comfort, and energy savings while
preserving views
Occupancy Sensor
• saves energy and increases
convenience by automatically
turning lights off when space
is vacant, and on when space
is occupied
Daylight Sensor Electronic Drive Unit
• saves energy by reducing • quietly controls shades
electric lighting usage based with ultra-precise alignment
on amount of daylight
Personal Control
(hand-held remote)
• controls your lights from
anywhere in your space for
comfort and convenience
04 | Lutron

7. + GRAFIK Eye QS ®
scene and zone controls + seeTouch QS
wallstations
®
GRAFIK Eye QS
• controls multiple shade and light zones;
creates light scenes at the touch of a button
Keypad Wallstations
• select a preferred light level
for every task, and adjust
shades quietly at the touch
of a button
05 | Lutron

8. + Quantum ™
hub and power panels + Quantum
software
™
Private office
Quantum Hub QS Smart Panel Green Glance™ Software
• connects all Quantum Power Supply • shows building occupants the
system components • provides low voltage environmental and energy savings
power to Sivoia® QS that result from Quantum
shades and accessories
Q-Admin™ Software
• centrally operates, configures,
monitors, sets timeclocks, and creates
reports for lighting in an entire building
Power Panels Q-Manager™ Server
(GP, XP, LP) • computer that stores all relevant data for
• remote dimming and reporting and trending (light levels, sensor
switching capability up status, power consumption, and more)
to 16 amps per circuit
Lutron | 06

9. = Quantum ™
total light management
Sample office building floor using Quantum components
for efficient electric light and daylight management.
Conference room
Keypad
Control
Hallway
Daylight
Sensor
Private office
Open office
GRAFIK
Eye® QS
Occupancy
Sensor
Sivoia® QS Sivoia QS EcoSystem® Fluorescent
Sheer Shades blackout shade Dimming Ballast
Lutron | 07

10. How the components connect together
Quantum one line ™
Persona
Personal
control
Key To additional IR
Building ethernet network floors receiver
rece
Interprocessor
communication link
QS link (RS-485)
Power panel link (RS-485)
EcoSystem® loop
seeTouch®
Sensor connection
master
To Internet wallstation
Green Glance™, on a
nce Interior office
client PC and LC display
LCD
P i t ffi
Private office W ll t ti
Wallstation
Q-Admin™ Q-Manager Ecosystem ballasts
on client PC server and sensors
To BMS
by others QS shade link
(BACnet IP)
QS control link
Quantum hub
Incandescent loads
LV loads
XP GP
GP/LP
switching dimming
dim GRAFIK Eye® QS
panel panels
pan with Ecosystem
To GP/LP dimming panel loads:
Lobbies and atriums
Auditoriums
Training rooms
Executive offices
Cafeterias
Lutron | 08

11. Oc
Occupancy Daylight
Da Shade
sensor
se sensor
se control
Open office Ecosystem®
office
ballasts and sensors QS smart panel
power supply
po
Open office areas
Perimeter office Shade
control
P i t ffi
Private office
Ecosystem ballasts
and sensors
Exterior
conference
RS232
R
interface
in rooms
Interior
To touchscreen
conference
by others
rooms
To XP switching panel loads:
Exterior lighting
Non-dim ballasts
(hallways, restrooms, stairwells)
I
Incandescent loads
d Sivoia QS
LV loads shades
Lutron | 09

12. Quantum energy savings and light control strategies
™
Architectural load dimming
Allows the users to dim traditional light sources such as incandescent,
halogen, low voltage, and LED.
Fluorescent dimming
Highly efficient dimming that allows the users to dim fluorescent
light down to 1% of full light output.
Controllable window shades
Allows quiet control of daylight for improved comfort
and productivity using Sivoia® QS shades.
Switching
Allows the user to switch on or off all non-dimmed light sources
using 1 million cycle relays.
100%
80%
High-end trim
60% High-end trim sets the maximum light level for each space,
40%
20% providing guaranteed energy savings.
Light level tuning
Sets the target light level based on customer requirements in each
space. This level is lower than the high-end trim light level.
Scene and zone control
Users can select pre-programmed light scenes or raise
and lower individual light zones.
Scene control
Users can select pre-programmed light scenes
at the touch of a button.
Personal light control
Allows users in the space to select the correct light level
for the desired task. Often that is much less light than full-on.
10 | Lutron

13. Occupancy or vacancy sensing
Automatically turn off lights when people vacate the space.
Daylight harvesting
Automatically adjusts the electric lighting levels based
on the amount of daylight in the space.
Scheduling
Lights turn off or are dimmed and shades are adjusted automatically
at certain times of the day or in relation to sunrise and sunset.
Hyperion™ solar-adaptive shading
Automatically adjusts Lutron Sivoia® QS window shades
based on the angle of the sun.
Area 1
Partitioning
Area 2
Automatically adapts the lighting controls to changes
in room configurations.
100%
80%
IntelliDemand™ load shed (demand response)
60% Allows the facility manager to reduce lighting load
40%
20% at times of peak electricity pricing.
BACnet integration
Allows simple integration with the building management system.
Remote monitoring and control
Allows management of your building’s light from anywhere in the world.
Reporting and trending
Allows the system operator to intelligently manage and monitor
the lighting in their building.
Lutron | 11

14. A day in the life of an office
Using occupancy sensors, daylight sensors, controllable
shades, timeclocks, and/or manual controls, Quantum™
reduces lighting energy usage typically by 60%.
Energy use in an open office area with Quantum total light management
100%
100%
80%
sets maximum light level
60%
40%
energy saved
Light Level
20%
50% energy used
0%
7:00AM 8:00AM 9:00AM 10:00AM 11:00AM 12:00PM 1:00
Security/facility staff enter: Office workers arrive: Lunch:
Shades automatically open to Workers arrive and the lights are automatically Lights automatically
let daylight into the space. When set to 80% light output to save energy. Based dim down to 10%.
security/facility personnel enter on the sun's angle, shades automatically lower Hyperion™ solar-
in the morning, occupancy to half-open to eliminate glare on computer adaptive shading
sensors turn lights on to 50% screens. Daylight sensors reduce the electric fully opens shades
to save energy. If more light light levels in response to the available daylight. to maximize the
is needed, lighting can be Workers are unaware of the light level change. use of available
adjusted via a wallstation. daylight. Workers
depart for lunch.
Sivoia® QS shading system occupan
Lutron occupancy and daylight sensors
12 | Lutron

15. Controllable
Light level Occupancy or vacancy sensing
window shades
w
100%
Lighting energy saved 80%
60%
40%
High-end trim Daylight harvesting
20%
Lighting energy used Scheduling Hyperion™ solar-adaptive
shading
s
P
Personal light
co
control
energy saved
energy used
PM 2:00PM 3:00PM 4:00PM 5:00PM 6:00PM 7:00PM
Workers return: Webinar: Workers Cleaning: After hours:
As daylight Workers dim their lights and leave: Lights Timeclock
decreases due to adjust shades with hand-held Lights automatically automatically turns
changing weather remotes to clearly view the automatically turn on to 80% lights off and lowers
conditions, lights computer screen and have dim down level for the shades to save
automatically rise enough light to take notes. to 10%. Control cleaning staff. energy, minimize
to higher levels. devices can light pollution, and
Workers are override if light create a clean
unaware of the is still needed. aligned facade.
light level change.
EcoSystem® hand-held remote
EcoSyste Q-Admin™
Software
Lutron | 13

16. Hyperion solar-adaptive shading
™
What it does The benefits
Hyperion solar-adaptive shading automatically adjusts • 10-30% reduction in solar heat gain1
window shades based on the sun’s position throughout • 3-29% reduction in heat loss1
the day to effectively manage the daylight in your building, • preserves external views
reduce glare, and save energy. • maximizes effective daylight
• increases comfort and reduces glare
The system operator inputs the desired sunlight penetration • creates an aesthetically pleasing
distance into the building and the number of shade preset exterior by perfectly aligning shades
positions. Then, Hyperion solar-adaptive shading automatically
calculates the angle of the sun and adjusts the shades
to maintain the preferred light penetration.
At night the shades are lowered to minimize light pollution
1 Lutron commissioned simulation by
and provide a uniform appearance with precision alignment.
T.C. Chan Center for Building Simulation and
The system also provides the ability for the user to manually Energy Studies, University of Pennsylvania,
override and adjust the shades to a custom level. September 2008.
Before: The afternoon sun makes After: With Hyperion solar-adaptive
it difficult to work productively due shading, the window shades automatically
to heat and glare in the space. close when the sun reaches a critical
angle – making the space more
comfortable by reducing glare and heat
14 | Lutron while maintaining the view outside.

17. How it works
As the sun moves throughout the day, Hyperion™ solar-adaptive shading
automatically adjusts the shade position without the requirement
for a complex array of external sensors. The Lutron out-of-the-box
solution allows simple set up based on the building’s geographic
location and user specified sunlight penetration.
Additionally, manual override – via simple keypads or handheld remote –
allows the user to adjust an individual window shade if required.
Compared to sensor based shading systems, the Lutron system
provides less movement and less distraction to occupants.
Shade: Closed
At sunrise the light and heat penetrate the building
so the shades remain closed for comfort and energy
savings, while still having access to the view.
Shade: Preset (Open 50%)
The sun angle is higher so shades open to preset
position to maintain the customer desired sunlight
penetration, and to reduce glare.
Shade: Open
Sun angle is at a point where glass reflects a majority
of the heat, plus light penetration is limited to 2 – 3 ft.
into the building. Shades automatically open to allow
maximum use of effective daylight.
Lutron | 15

18. Q-Admin software highlights
™
Beyond light control to light management
The heart of the Quantum™ solution is Q-Admin—Quantum’s powerful software
that allows facility managers to manage their electric light and daylight for
maximum energy efficiency, comfort, and productivity. From a central location,
a facility manager can not only control electric lights and shades but also
configure, monitor, analyze, and report on the light in an entire building.
Control and monitor
Allows you to control and monitor any space in your
building by area scene, area level, or individual zone.
16 | Lutron

19. Timeclocks
Q-Admin™ software includes two types of timeclocks, a time-of-day
clock (e.g. 8pm weeknights) and an astronomic clock (e.g. dawn or dusk),
which control the lights and shades on the Quantum™ network. Lights
can automatically be set to a preset level or turn on or off in certain
spaces based on the time of day; and shades can automatically raise
or lower in certain spaces at specific times.
Lutron | 17

20. Q-Admin software highlights
™
IntelliDemand™ load shed
Allows facility managers to shed a percentage of the system’s lighting output
to reduce energy costs for their facility. This can result in lower electricity rates
or rebates from utility companies, who often request reductions in electricity
levels when peak load conditions threaten to cause a blackout. With Q-Admin™
software, simply set the percentage reduction in light level and instantly
load shed your entire facility or particular space from its current power level.
18 | Lutron

21. Reports Reports include:
Allows facility managers to improve maintenance and operations, • lighting power or energy usage
identify issues before they become problems, and monitor the lighting • system activity
energy consumption in the whole building or any part of the building. • fluorescent lamp failures
Lutron | 19

22. Green Glance software ™
How green is your building?
Demonstrate your company’s commitment to energy efficiency
with Green Glance energy-saving display software.
Green Glance software provides a quick snapshot of your building’s
energy savings from using the Quantum™ total light management system.
Building owners and facility managers can use Green Glance to motivate
employees to save energy, or to support their organization’s reputation for
being green and socially responsible. They can also use Green Glance as
an educational tool to display their facilities’ economic and environmental
benefits from using Quantum, such as dollars saved, CO2 not emitted, or
tons of coal preserved. Furthermore, they can use Green Glance software
to display any other green facts about their building such as details on
waste reduction programs or water efficiency systems.
20 | Lutron

23. Green Glance™ displayed on a user-supplied LCD screen.
Average lighting energy saved Displays lighting energy
over user-selected period. and environmental savings
Maximum potential savings Displays project details and lighting
energy calculation information
User can select pre-defined spaces
Real-time lighting power
User-selectable time periods saved by using Quantum™
for lighting energy displays
Building local time and date
Displays local conditions
(requires internet access) Compares lighting energy savings
of different time periods
Lutron | 21

24. Our company
A history of sustainability, innovation, and quality
At Lutron, sustainability is not new to us. Lutron is a company built on a
belief in taking care of people: customers, employees, and the community.
We are a proud member of the U.S. Green Building Council. And since
1961, we have been designing industry-leading technology that saves
energy and reduces green house gas emissions.
We innovate in advance of emerging market needs and continually
improve our quality, our delivery, and our value.
Lutron owns over 250 patents and manufactures more than 15,000
products. For over 45 years, we have met and exceeded the highest
standards of quality and service. Every one of our products is
quality-tested before it leaves the factory.
22 | Lutron

25. Global service and support
You can count on a level of support unequaled anywhere in the industry
and anywhere in the world. Lutron provides 24/7 technical phone support.
Lutron Field Service, made up of a global network of customer-focused field
service engineers, provides world-class services that begin before your
building is commissioned and continue throughout the life of your building.
For help saving energy on your next project
Call Lutron today at 1.866.299.2073 and you will be connected
to a Lutron representative who will be able to provide you with
a plan of action for your application.
23 | Lutron

26. “At first, we weren’t even thinking about
daylight sensing because we just assumed
we couldn’t afford it. But we were pleasantly
surprised by the cost savings and decided
to integrate them into our plans to be both
universal and green in our design.”
Kerri Callahan, AIA, IIDA, LEED AP
Architect
This facility saves over $10,000 each
year by managing light with Quantum.
Access Living, Chicago, Illinois
Green Facts
Buildings 1
Square Feet 50,000 sq. ft.
Lighting Fixtures 380
Lighting Energy Savings 65%
Annual CO2 Reduction 90 metric tons
Certification LEED® Gold
24 | Lutron

27. “It fits well into our constantly changing
environment. When we remove or add walls,
we simply remove or add devices without
power rewiring or changes to conduit.”
Jeff Choma, Manager of Mechanical and Electrical Systems
Georgian College, Ontario, Canada
This facility saves over $137,000 each
year by managing light with Quantum.
Georgian College, Ontario, Canada
Green Facts
Buildings 9
Square Feet 700,000 sq. ft.
Lighting Fixtures 3,300
Lighting Energy Savings 70%
Annual CO2 Reduction 1,284 metric tons

28. Quantum total light management
™
Save electricity and protect the environment
Reduces greenhouse gases by eliminating unnecessary energy use
Save money
Lowers operating costs and peak demand charges
Create a more flexible space
Lighting and shading zones can be re-configured without rewiring
Increase productivity and comfort
Makes occupants more productive and comfortable
with preferred light levels and automated shade control
ENVIRONMENTAL BENEFITS STATEMENT
Lutron Electronics saved the following resources by using Diamond Gloss
Cover and Text (FSC), manufactured with 10% recycled content.
greenhouse
www.lutron.com/quantum trees water energy solid waste gases
2 888 <2 147 271
Lutron Electronics Co., Inc. fully grown gallons million BTUs pounds pounds
7200 Suter Road Environmental impact estimates were made using the Environmental Defense Paper Calculator.
For more information visit http://www.papercalculator.org.
Coopersburg, PA 18036-1299
World Headquarters 1.610.282.3800
Technical Support Center 1.800.523.9466 (Available 24/7)
Customer Service 1.888.LUTRON1
© 09/2008 Lutron Electronics Co., Inc. I Made and printed in the U.S.A. I P/N 367-1321