STM32 has 2 lines; the performance line at the left and the access line at the right * 07/16/96 * ##
Boot modes: User flash: Programmed with user application code System memory: Programmed in factory with boot code. Used when we program the user flash with our code SRAM: Used during development for faster download and booting * 07/16/96 * ##
Clock Security System (CSS) used to back up in case of HSE failure to run the HSE instead. * 07/16/96 * ##
The reset and clock control unit controls the clock tree bus bridges and backup domain. Configure the PLL Configure the buses * 07/16/96 * ##
12-bit resolution 18 channels: 16 external and 2 internal 1 MHZ sample rate Conversion time programmable An injected group conversion interrupts regular group conversions Analog watchdog ADC is used to detect over/under voltage conditions on any of the input channels Results are left-aligned or right-aligned An offset is deducted from the injected results Injected group results are sign extended DMA can be used to automate data transfer of results of ADC1 * 07/16/96 * ##
* 07/16/96 * ##
Extends the modes of operation of the ADC by HW SW implementation would be more complex! Adds 8 more modes of operations * 07/16/96 * ##