2. 17 YEARS OF FIGHT
OVER SUPREMACY!
About us
Founded in the year 1996, ADEPLAST is a dynamic company which is present on the construction materials market in
Romania and on other markets as well, which grows continuously according to customers and partners demands,
offering perfectly adaptable complete solutions.
ADEPLAST is the only company with 100% Romanian funds which is on the top 10 manufacturer list next to multinational companies with high reputation like “Lafarge Cement”, “Holcim”, “Carpatcement Holding”. The spectacular
evolution of the company has determined the extension of her production capacities, at present time there is a
factory in Oradea, one in Ploiesti and another in Roman. Today we have finish another paint&plasters factory in
Ploiesti.
Evolution and perspectives
At the starting point of ADEPLAST, Marcel Barbut owned 96% of company shares, investing 10.000 $ - the equivalent of 31.000.000 Lei at that period. The other four associates contributed with only 8$, meaning 25.000 Lei. However, the profit was split equally. Within one year the associates had the right to re-buy the shares. By the profit they
made, the four share-holders had bought their shares, each one of them having 20%.
In the year 2002 Mr. Marcel Barbut bought from Mr. Aron another 10% from the share-package with 125.000 Euro,
managing to own 30% of the company shares. The same thing is being done by Mr. Flaviu Pop who manages to hold
30% of the shares, also.
In the year 2005 the Stefani family together with Mr. Marcel Barbut bought Mr. Flaviu Pop and Mr. Erdosi shares with
the sum of 5.000.000 Euro and in this way Mr. Barbut manages to hold 60% of the shares and the Stefani family
only 40%.
In 2007 Mr. Marcel Barbut buys for 6.000.000 Euro the shares of Stefani family and manages to own all the shares
of AdePlast.
In the same year Mr. Marcel Barbut gives one share to Mrs. Cristina Paveliuc and transforms AdePlast in a company
based on stocks, his intention being to have it rated on the Stock-Market so that he can obtain the necessary funds
for a new development.
Because of the economical crisis during that time Mr. Marcel Barbut gives up at the Stock-Market ratings and starts
investing, very seriously, in the development of the company throughout credits. Because of the continuous ascension of the company and also her profitability the UNICREDIT TIRIAC Bank has sustained and she still does all the
initial plans for development of AdePlast.
The company has ended he year 2012 with a growth of 30% and a temporary EBITDA of 7.900.000 Euro. The company has reach the economical crisis having an EBITDA value of over eight times, meaning 63.000.000 Euro.
Mr. Marcel Barbut did not give up his plan of listing the company to the Stock-Market. INTERCAPITAL, close related
to ERSTE will share the AdePlast investment group to the Stock-Market for developing a surprise investment.
Brief History
• 1994, founded at Oradea, having the name “Multistar Prod S.R.L.”
• 1996 Mr. Marcel Bărbuţ becomes share-holder and the company becomes an austrian-romanian mixt company,
the goal of the company becomes the production of adhesives mortars for ceramic tiles, plasters, industrial floors
2
3. and automatized mortars under the trademark of ADEPLAST SA.
• 2004, June, Dry Mortars Factory in Oradea.
• 2005-2007, a strong auto fleet is created.
• 2007, Multistar Prod S.R.L. becomes a company based on bonds named ADEPLAST S.A.
• 2008 July, Paints and Decorative Plasters Factory in Oradea.
• 2008 September, Dry Mortars Factory in Ploieşti.
• 2011 May, “Dry-Sieving Sand Instalation” created for Dry Mortars Factory in Oradea
• 2011 June, Polystyrene Factory in Ploiesti
• 2012 November, Production Line for graphite polystyrene
Factory in Ploiesti
Locations
Industrial Platform - Ploiesti
Dry mortars factory
The factory produces 450.000 tones/year of dry mortars,
has large warehouses and a very well based logistic.
Expanded polystyrene factory
This factory has a capacity of producing white polystyrene
for over 700.000 cubic meters.
The production line bought from Zentyss makes 150.000
cubic meters per year of graphite polystyrene being a line
dedicated to this profile.
As a result, the entire capacity of production is of 850.000
cubic meters.
Paints and decorative plasters factory
At the beginning of August - 2013, at Ploiesti, a new factory of paits and decorative plasters has been build with a
value of aprox. 6.000.000 Euro. The factory has a production capacity of 20.000 tones/year and she is fully automatized - the factory is being operated by 5 employes only.
3
4. Oradea Industrial Platform
Paints and decorative plasters factory
The total production capacity reaches to 20.000 tones/year for washable paints
and decorative plasters. The production is made only by 5 employes because the
factory is completely automatized.
Dry mortars factory
We produce annually about 250.000 tones of dry mortars. 25 - 40% of production is designated to export in countries such as: Hungary, Slovakia, Germany and
Austria. The purpose of ADEPLAST is to export as a unit the components of an integrated system (adhesives, polystyrene, fillers foundation and decorative plasters).
Expanded polystyrene factory
The polystyrene factory will have a capacity identical to the one in Ploiesti of over
700.000 m³ and is the only one in Europe who can produce white and graphite
polystyrene at the same time. The total capacity predicted for the polystyrene production, of both types, for Oradea, Roman and Ploiesti locations will be of over
2.250.000 m³/year.
Roman Industrial Platform
Dry mortars factory
The investment was started in the year 2010, but postponed due to the lack of a
financially support and bureaucratic impediments from the government and local
authorities. Started all over again by own efforts in the year 2012 and against all
difficulties, the new adhesives and dry mortars factory rises in a sustained way. At
the beginning of the year 2013 the factory is up and ready and manages to produce
over 450.000 tones/year of adhesives and dry mortars - European quality.
Expanded polystyrene factory
The factory will have a capacity identical to the one in Ploiesti of 700.000m³ being the only one in Europe who can produce both brands - white and graphite
polystyrene.
4
5. ADEPLAST - European Class Competitor
Adeplast currently produces over 50 varieties of building materials. ADEPLAST force in Romania will rise to eight production facilities in dry mortars, plasters, paints and insulating
materials, becoming one of the major players in Europe markets. In its location ADEPLAST created hundreds of jobs, has
developed partnerships with distributors, manufacturers, carriers and various other vendors, contributed to local budgets
and continuously developed long term relationships. Investing and permanently modernizing, ADEPLAST is ready for any
challenge, being a competitor and a leading European partner.
Marcel Bărbuț
5
6. professional series - ADEPLAST innovation
professional series - ADEPLAST innovation
PROFESSIONAL SERIES - ADEPLAST INOVATION
GENERAL TERMS
In this way, Adeplast is launching an innovative range of products on the Romanian
market, which contain a special ingredient, created to ensure particular features, named
PORUS X. This ingredient has the ability of waterproofing, maintains surface porosity and
also reduces significantly water absorption.
The Porus X ingredient, founded exclusively in the professional range of ADEPLAST products, provides properties that set apart this products compared with others that are already on the market:
Constant and persistent improvement of the product quality and also of all the features,
design and diversification are to ADEPLAST a new action concept created for the needs of
the customers there-for increasing their loyalty and satisfaction.
- Water resistance: hydrophobic action for the surfaces on which that products are
applied (“pearl effect”).
- Increased permeability to water vapours: breathable wall.
- Durability: increases the life of the surface.
COMPONENT RANGE:
AERIA STONE with PORUS X
AERIA with PORUS X - EXTERIOR PAINT
6
AERIA PLAST with PORUS X - DECORATIVE PLASTER
AERIA with PORUS X - INTERIOR PAINT
7. professional series - ADEPLAST innovation
AERIA Series - revolutionary vectors of the PORUS X ingredients.
AERIA STONE with PORUS X - hydrophobic action for natural stones and facades
Application:
Consumption:
APVI
AERIA with PORUS X - interior paint
Application:
Consumption:
Colouring:
APVE
For painting all mineral interior layers based on lime, lime-cement, lime-plaster, plaster, concrete. Recommended for professional use, to obtain breathable surfaces with high resistance to contamination.
Approx. 0,20 - 0,30 liters / m², on two layers.
The product is delivered by the manufacturer already colored at the option of the beneficiary, based on
ADEPLAST color chart, or is delivered white.
AERIA with PORUS X - exterior paint
Application:
Consumption:
Colouring:
APT
For impregnating mineral surfaces, natural stones, etc. in order to eliminate water absorption and to obtain the
“pearl effect”without changing the looks of the impregnated layer.
Approx. 50-100 ml / m² depending on the absorbency and the nature of the substrate. To determine
actual consumption, we recommend testing directly on the construction site on the surface that requires
finishing.
professional series - ADEPLAST innovation
APAH0
For painting all mineral exterior layers based on cement, plaster and for renovation of areas covered with dispersion paint or decorative plasters, aiming for a colored finish with brilliant hues.
Approx. 0,20 - 0,30 liters / m², on two layers.
The product is delivered by the manufacturer already colored at the option of the beneficiary, based on
ADEPLAST color chart, or is delivered white.
AERIA PLAST with PORUS X - decorative plaster
Application:
It is used for decorative coatings and professional finishing with waterproof and breathable effect particularly on
the interior and exterior works. Can be applied to any type of mineral surfaces: plasters, concrete, masonry, etc..
Professional quality - can be easily applied in a single layer. Recommended for professional use.
Colouring:
The product is delivered by the manufacturer already colored at the option of the beneficiary, based on
ADEPLAST color chart, or is delivered white and colored when applied using coloring paste.
Consumption:
- Troweled plaster:
1,0 mm - 2,0 kg / m²
1,5 mm - 2,5 kg / m²
3,0 mm - 3,5 kg / m²
- Scratched plaster:
2,0 mm - 2,8 kg / m²
3,0 mm - 3,1 kg / m²
- Roled plaster:
1,5 kg ÷ 2,5 kg / m²
7
8. professional series - ADEPLAST innovation
professional series - ADEPLAST innovation
Silicon Based Paints and Decorative Plasters
Silicone decorative plaster is a decorative structured plaster in relief, ready to
be use, based on silicone resin, diluted with water. Washable, elastic, flexible,
waterproof with hydrophobic properties, resistant to scratch and impact, highly
resistant to aggressive environmental factors such as rain, humidity, temperature
variations, solar radiation, pollution, etc. - it is used for decorative coatings and
special effect finishes for interior and exterior works.
Can be applied to any type of mineral surfaces: plasters, concrete, masonry, but
are recommended for historic buildings and monuments and also on the north
side of buildings. Due to its higher professional quality, it can be easily applied in
a single layer or as a trowel plaster, scratched or rolling.
The product is delivered by the manufacturer already colored at the option of the
beneficiary, based on ADEPLAST color chart, or is delivered white and colored when
applied using coloring paste.
Silicone decorative plaster should be applied on dry, dust-free and carrying surfaces. Any projections will be removed. Inhomogeneous surfaces showing oil
substances or otherwise, which could form a film between the material and support must be treated accordingly.
Work performed with finishing products
materials from ADEPLAST.
8
On how to apply the paint, in the case of trowel plaster (of 1.0mm, 1.5mm and
3.0mm) and the scratched plaster (of 2.0mm and 3.0mm), this will apply with
the stainless steel trowel (float metal) in a thin layer (optimum layer thickness
as close as the diameter of the granules). On the trowel plaster the structuring is
made in a uniform way until you obtain the desired relief and appearance: granular - calcium type. At the scratched plaster you can choose the layout, direction
and form of the grooves depending on how the structure is made (vertical, horizontal, round, irregular, etc..). Role plaster application will be made with a stainless steel trowel with teeth of 4mm and after that the material is spread evenly
with a structure roller made of harsh sponge (surface with holes) in a vertical way
and then horizontal.
The material cannot be applied in bright sunlight or at high wind or when there is
a risk of rain or freezing they may cause, during application and drying, cracking
and colour differences. After application, the external surfaces will be protected
from rain, until completely dry (48 h at 20 ˚C). For any coloured plasters, joints
and joiners between colours are made using self-adhesive paper.
9. professional series - ADEPLAST innovation
DECOPLAST SILICONICĂ- STRUCTURED DECORATIVE PLASTER
Application:
Colouring:
Consumption:
Packaging:
Pallet Stand:
Quality Standard:
28 kg bucket.
24 buckets/pallet 672 kg.
SR EN 15824:2009.
base type B1 - white base, pastel colors
structure
TROWELED Product code:
SITD15B1
PLASTER
1,5 mm
SCRATCHED Product code:
PLASTER
2,0 mm
ROLED
PLASTER
SIVE
Product code:
Used for decorative coatings and special effect finishes in indoor and outdoor works. Can be applied to any type
of mineral surfaces: plasters, concrete, masonry, etc.. Professional quality, can be easily applied in a single layer.
The product is delivered by the manufacturer already colored at the option of the beneficiary, based on
ADEPLAST color chart, or is delivered white and colored when applied using coloring paste.
-Troweled plaster: 1,5 mm - 2,5 kg/m²
- Scratched plaster: 2,0 mm - 2,8 kg/m²
Indicated consumption refers to perfectly smooth surfaces and may vary depending on the thickness
of the coating and the characteristics of the base-layer. For this reason we can not accept any liability
in relation to material requirements for each case.
B2 - intermediary base, pastel colors
B3 -transparent base, pastel colors
Product code:
SITD15B2
Product code:
SITD15B3
SITZ20B1
Product code:
SITZ20B2
Product code:
SITZ20B3
SITRB1
Product code:
SITRB2
Product code:
SITRB3
professional series - ADEPLAST innovation
SIT
VOPSEAUA MESERIAȘULUI - SILICON
Application:
Colouring:
Consumption:
Packaging:
Pallet Stand:
Quality Standard:
For painting all interior and exterior mineral surfaces. Can be applied to any type of new mineral surfaces based
on cement or plaster and also for renovating areas covered with dispersion paints or decorative plasters in order
to obtain a colored finish and brilliant hues. Recommended for mineral insulating system based on mineral
wool, restoration of historical monuments, old buildings and on the north side of buildings.
The product is delivered by the manufacturer already colored at the option of the beneficiary, based on
ADEPLAST color chart, or is delivered white and colored when applied using coloring paste.
Approx. 0,20 - 0,30 liters / m², on two layers.
5 L bucket.
24 buckets/pallet 672 kg.
Approved product by INCERC s.a.
B2 - intermediary base, pastel colors
B3 -transparent base, pastel colors
SIVE3LB1
Product code:
SIVE3LB2
Product code:
SIVE3LB3
Product code:
SIVE8LB1
Product code:
SIVE8LB2
Product code:
SIVE8LB3
Product code:
base type
B1 - white base, pastel colors
Product code:
package
SIVE15LB1
Product code:
SIVE15LB2
Product code:
SIVE15LB3
3L
8L
15 L
9
10. professional series - ADEPLAST innovation
professional series - ADEPLAST innovation
ADHESIVES & PRIMERS - PROFESSIONAL SERIES
Ceramic tiles with
Adhesives AFX-9 and AF 11 plus, from the professional range, are used for laying
tiles and plating absorbent and poorly absorbed sandstones from the inside, in
dry environments, without moisture and excessive heat, on rough and stable
support (plaster and cement lime, BCA, concrete, cement screeds, etc.).
The support surface must be reinforced, clean, dry, free of cracks, adherent
and compact, free from grease, dust, loose residues and salts. Old mortar with
bumps and warps will be removed. The layout surface will be rendered with
mortar made of lime or cement or with other mortars from the ADEPLAST®
series.
Professional finishing systems
The Plaster with Porus X from professional series is used for finishing interior
surfaces without excessive moisture from concrete, lightweight concrete, dry
plaster, cement, lime and gypsum blocks. It is intended to provide very fine and
smooth surfaces before painting or oil painting.
The specific ingredient - Porus X, developed specifically for ADEPLAST provides
increased system performance and defines specific qualities:
- High permeability to water vapours. It allows the wall to breathe but
does not allow water to enter from the outside.
-Durability: increases the life of the finish surfaces.
10
System Components:
1. Porus X Wall Primer. Prepares the layout surface by reducing and
smoothing absorption. The surface must be clean, adherent and compact,
old - for at least 30 days, free of grease, dust, loose residues, salts and gypsum traces.
2. GM-126 - Porus X Plaster Filling. His role is to cover bad surfaces
in order to prepare them for finishing layouts and to ensure that bumps
aren’t bigger than 5 mm.
3. GM-127 - Porus X Finishing Plaster. Super white, with a very good
workability for obtaining impeccable surfaces.
4. AERIA with Porus X - Interior Paint. Excellent coverage, increased
permeability to water vapours. It allows the wall to breathe, but does not
allow water to enter from the outside.
11. professional series - ADEPLAST innovation
Ceramic tiles adhesives - POLYMER 1000X
AFX-9
SPECIAL ADHESIVE FOR CERAMIC TILES – FOR INTERIOR
For tiling works and cladding tiles at the inside, in dry
environments, without moisture and excessive heat on
medium rough and stable mineral support(cement and
lime plaster, brick, concrete, cement screeds, etc..).
NOTE: Do not apply on gypsum boards.
Consumption:
AF 11 plus
Application:
about 3-4 kg / m² depending on the quality of the layout.
Application:
For Tiling works and cladding tiles, porcelain tiles, tile over
tile, dapper cement and so on, for inside or outside, exposed
to temperatures between -25 ° C and + 80 ° C in wet or dry
environments. Do not apply on metal support, wood, plastic,
etc.
about 3-4 kg / m² depending on the quality of the layout.
5 945762 011800
Product code:
Packaging:
Pallet Stand:
Quality Standard:
AF 11 plus
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 13279-1:2008
5 94576 2 01 1 8 1 7
Finishing Plasters cu PORUS X
GYPSUM BASED PLASTER WITH PORUS X, FOR FINISHING WORKS
Application:
For finishing interior surfaces without excessive moisture from the concrete, lightweight concrete, cement
based dry plasters, cement - lime, gypsum blocks. It is
used to obtain very fine and smooth surfaces before
painting or oil painting.
Consumption:
GM 127
AFX 9
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 13279-1:2008
SPECIAL ADHESIVE FOR PORCELAIN CERAMIC TILES
Consumption:
GM 126
Product code:
Packaging:
Pallet Stand:
Quality Standard:
professional series - ADEPLAST innovation
0,5 to 1 kg/m² at 1 mm thickness applied.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
GM 126
bag of 20 kg
48 bag/pallet 960 kg
SR EN 13279-1:2008
5 94576 2 01 1 7 9 4
CEMENT BASED PLASTER WITH PORUS X, FOR FINISHING WORKS
Application:
For finishing interior and exterior surfaces of concrete,
lightweight concrete, cement dry-based plasters,
cement - lime and where there is a risk of a wet environment after application (bathroom, kitchen, rooms
like indoor swimming pool, etc.). It is used to obtain
very fine and smooth surfaces.
Consumption:
0,5 to 1 kg/m² at 1 mm thickness applied.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
GM 127
bag of 20 kg
48 bag/pallet 960 kg
SR EN 13279-1:2008
5 94576 2 01 1 7 8 7
11
12. adhesives for tiling
adhesives for tiling
ADHESIVES FOR TILING
Preparation Guide for ceramic tiles adhesives
Mixing
Trowel
The consistency of the material on the trowel
12
Application of the material on the support surface
SUPPORT SURFACE:
It must be strengthened, clean, dry, free of cracks, adherent and compact, free from grease, dust,
breakable residues and salts. Swelling and warp old mortar will be removed. The support surface
will be plastered with ordinary mortar and lime or with mortars from ADEPLAST® mortars range.
For uneven surfaces such as screeds we will apply a levelling screed. In the case of surfaces that
must be plated in wet areas, outside or at the pool, you can, in advance, waterproof the surface
with ADEPLAST® MH-1K waterproofing mono-component membrane.
In the case of bad or deformable support surfaces, it is necessary to use AF-S white or AF-S
grey.
BCA walls will be plastered in advance with mortar based on cement-lime (ADEPLAST ® MTI-25
indoor ADEPLAST ® Outdoor MTE-35) after complete curing of the mortar (7 days/cm applied
layer thickness) and then the adhesive can be applied.
TOOLS NEEDED:
- bucket
- mechanical or by hand mixer
- trowel
- notched with teeth of 6 x 6 mm, 8 mm x 8 mm or 10 x 10 mm depending on the size of the
plate
- construction level
- tile cutter
PREPARATION AND APPLICATION:
The powder is introduced into water and then we begin mixing. Both the container and the water
used must be clean. It is recommended to mix a quantity that is used once in an hour. Mixing is
done vigorously, preferably mechanical (to an electric drill an axle paddle can be attach) until
a creamy mixture, homogeneous, easy to be processed and with suitable fluidity. In the event
that an insufficient amount of water is added, the product loses its adhesive properties. Wait 10
minutes for the completion of chemical reactions and mix vigorously again. The paste is placed
on the surface in a thickness of 4-5 mm, after which rake with a comb with teeth of 6-8 mm in
width and depth. Raking the paste has a double advantage: increases grip plate and reduces the
material consumption. Paste deposited on the adhesive pad maintains properties for 15-20 minutes. Paste adhesive capacity can be checked by tapping the surface with fingers. Sticky fingers
indicate that paste adhesive is suitable. Plates are placed onto the adhesive layer and pressure
is applied vigorously, followed by tapping movements, in order to ensure the largest possible
contact area ( at least 75 % of the back of the plate ).
In the case of AF-N ADEPLAST ® adhesive, when tiles are applied over a smooth surface like dapper cement, mosaic, old tiles, the surface must be clean in advance by washing with warm water
and liquid detergent - wash traces of detergent with water, wipe surface with a clean, dry cloth,
then apply a bonding layer of 0.5 - 1 mm thick AF-N ADEPLAST® adhesive and leave it for 24
hours to harden. The next day, over this layer, the mixture is applied using a comb shape trowel.
The paste from the bucket retains its adhesives properties for at least 2 hours. Joints are closed
with ADEPLAST KITS JOINTS, ADEPLAST QK-6 or QK-15, after a minimum curing period of 24
hours.
Any subsequent work will be done after a minimum of 72 hours from the plating time.
THE SURFACE BECOMES USABLE:
After a minimum of 24 hours for ADEPLAST JOINTS KITS, ADEPLAST QK-6 or QK-15 - adhesive
kits for joints. After less than 72 hours for general use.
13. adhesives for tiling
adhesives for tiling
Specific consumption optimization by raking.
Plate adhesive appliance.
Application of the material on the support surface.
Applying the plate and tapping.
AF-I
IMPORTANT:
At temperatures below 20 ° C the curing time is extended.
In addition to the above it is important to follow all the rules and standards that are now in place.
Guaranteed characteristics are based on practical experience and tests. The specific location and
application may be different from those presented here, therefore, proper and successful use of
our products is not in our sphere of responsibility.
CERAMIC TILES ADHESIVE FOR INTERIOR SURFACES
Scope of use:
Specific consumption:
Tiling works and cladding tiles for inside surfaces, in dry
environments, without moisture and excessive heat on
rough and stable mineral surfaces (cement and lime
plaster, brick, concrete, cement screeds, etc.).
NOTE: Do not apply on gypsum boards.
approx. 3 - 4 kg/m² depending on the quality of the
support surface.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
AF-E
afi05
bag of 5 kg
140 bags/pallet 700 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
afi25
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
afi5x5
box of 5 x 5 kg
28 boxes/pallet 700 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
afe25
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
afe5x5
box of 5 x 5 kg
28 boxes/pallet 700 kg
SR EN 12004 / 2008
CERAMIC TILES ADHESIVE FOR EXTERIOR SURFACES
Scope of use:
Specific consumption:
Tiling works and cladding tiles for inside or outside
surfaces, exposed to temperatures between -20 ° C and
+80 ° C in wet or dry environments, on rough backing
mineral surfaces (cement and lime plaster, brick,
concrete, screed of cement, etc.).
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
Product code:
afe05
Packaging:
bag of 5 kg
Pallet Stand:
140 bags/pallet 700 kg
Quality Standard: SR EN 12004 / 2008
13
14. adhesives for tiling
adhesives for tiling
AF
CERAMIC TILES ADHESIVE FOR INTERIOR / EXTERIOR SURFACES
Scope of use:
Specific consumption:
AF-N
Scope of use:
Tiling works and cladding tiles, porcelain tiles, tile over
Product code:
tile, dapper cement and so on, for inside or outside,
Packaging:
exposed to temperatures between -25 ° C and + 80 ° C
Pallet Stand:
in wet or dry environments and also for the applicaQuality Standard:
tion of ceramic tiles over under-floor heating. It can be
used for application of clinker and greso-granite plates,
tiles, gypsum boards, façade appliance of Basalt tiles
for exterior insulation of houses build on Rockwool
(Fasrock, Frontrock) or Nobasil (FKL) patterns.
approx. 3 - 4 kg/m² depending on the quality of the support surface.
Scope of use:
Tiling works and cladding tiles, porcelain tiles, tile over tile,
dapper cement, marble, granite and so on, for inside or
outside, exposed to temperatures between -25 ° C and + 80
° C in wet or dry environments, and also for the application
of ceramic tiles over under -floor heating. It can be used for
application on clinker and greso-granite plates, tiles, gypsum
boards, big tiles over mineral sub-surfaces.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
af-s grey
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
af-s white
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
af11+
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
SUPERFLEXIBLE HIGH STRENGHT ADHESIVE
Scope of use:
Tiling works and cladding tiles, porcelain tiles, tile over tile,
dapper cement, marble, granite and so on, for inside or outside, exposed to temperatures between -25 ° C and + 80°C
in wet or dry environments, and also for the application
of ceramic tiles over under-floor heating. It can be used for
application on clinker and greso-granite plates, tiles, gypsum
boards, big tiles over mineral sub-surfaces and where white
colored adhesive is needed.
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
PORZELLANO - ADHESIVE FOR PORCELAIN TILES
Scope of use:
Specific consumption:
14
af-n
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
Specific consumption:
AF-11 +
af
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
SUPERFLEXIBLE HIGH STRENGHT ADHESIVE
Specific consumption:
AF-S WHITE
Product code:
Packaging:
Pallet Stand:
Quality Standard:
HIGH STRENGTH SUPERPLASTIC ADHESIVE
Specific consumption:
AF-S GREY
Tiling works and cladding tiles for inside or outside
surfaces, exposed to temperatures between -20 ° C and
+80 ° C in wet or dry environments, on rough mineral
surfaces (cement and lime plaster, BCA, concrete,
screed of cement, etc.).
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
Tiling works and cladding tiles, porcelain tiles, tile over tile,
dapper cement, marble, for inside or outside, exposed to
temperatures between -25 ° C and + 80°C in wet or dry
environments. Do not apply on metal support, wood, plastic,
etc.
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
15. adhesives for tiling
FS-57 WHITE
WHITE ADHESIVE FOR NATURAL STONES
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
fs-57w
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
fs-57g
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
Product code:
Packaging:
Pallet Stand:
Quality Standard:
mx-white
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
GREY ADHESIVE FOR NATURAL STONES
Scope of use:
For the construction of natural stone coverings, with
average absorption, from the inside or outside, exposed to
temperatures between -25 ° C and + 80 °C, in wet or dry
environments. Do not apply on hard metal, wood, plastic, etc.
Specific consumption:
MX WHITE
Product code:
Packaging:
Pallet Stand:
Quality Standard:
approx. 3 - 4 kg/m², depending on the quality of the
support surface.
WHITE ADHESIVE FOR MARBLE AND GRANITE
Scope of use:
Tiling works and cladding big tiles, marble tiles, granite
and other natural stones, clinker and greso-granite,
where keeping the white colour of the adhesive to the
most demanding work inside or outside the building
is necessary, for cladding low temperature rooms and
over-heated flooring, exposed to temperatures between -25 ° C and +90 ° C, in wet or dry environments.
Specific consumption:
MX GREY
approx. 3 - 4 kg/m², depending on the quality of the support surface.
ADHESIVE FOR MARBLE AND GRANITE
Scope of use:
Tiling works and cladding big tiles, marble tiles, granite
and other natural stones, clinker and greso-granite,
for interior and exterior jobs that need special care,
for cladding low temperature rooms and over-heated
flooring, exposed to temperatures between -25 ° C and
+90 ° C, in wet or dry environments.
Specific consumption:
MH-1K
adhesives for tiling
For the construction of natural stone coverings, with average
absorption, from the inside or outside, exposed to temperatures between -25 ° C and + 80 °C, in wet or dry environments, where the white colour of the adhesive is required. Do
not apply on hard metal, wood, plastic, etc..
Specific consumption:
FS-57 GREY
Scope of use:
approx. 3 - 4 kg/m², depending on the quality of the support surface.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
mx-grey
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 12004 / 2008
MONO-COMPONENT WATERPROOF MEMBRANE
Scope of use:
It is used for waterproofing works on terraces, balconies, pools or water tanks before plating with ceramic
tiles, natural stone or marble. For plating, use only a
flexible adhesive such as GREY AF-S or WHITE AF-S.
Due to the grain size of 0.8 mm the surface roughness
is very high, resulting in an increased adherence of
the adhesive applied to the waterproof membrane.
Do not use for swimming pools and water tanks with
depths over 4 meters, on surfaces that are generating
efflorescence and also on mineral surfaces with low
compressive strength (breakable surfaces).
Specific consumption:
approx. 3 - 5 kg/m² (depending on the quality of the
support surface), with a total thickness of 2mm /
maximum 2 layers.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
mh-1k
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 14891: 2008
15
16. expanded polystyrene thermal insulation materials
expanded polystyrene thermal insulation materials
THERMAL INSULATING MATERIALS
Thermal Insulation Boards of Fire Retardant Expanded Polystyrene Beads
ADP70
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
As thermal insulation boards intended for:
- spaces with no particular static load
- insulation of spare spaces
- indoor insulation and ceiling intra-dos
Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1
Technical features:
Panel size (length x width [mm]) ................................................ 1000 x 500 mm +/- 3 mm L1 x W1
Perpendicularity, as per SR EN 824 ...................................................................... +/- 2mm /1 m S2
Evenness, as per SR EN 824 ...................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 .................................................................. BS75 BS≥75
Compressive stress at a 10%, deformation, as per SR EN 826 ………………...... CS10(50) CS≥50
Traction resistance, as per SR EN 1607 ..................................................................... TR50 TR≥50
Thermal conductivity [W/m•K] .............................................................................................. 0,040
Adustion class, as per SR EN 13501-1 ............................................................... Euroclass B-s2,d0
ADP80
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
As thermal insulation boards intended for:
- spaces with no particular static load
- insulation of spare spaces
- indoor insulation and ceiling intra-dos
- facades
Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T1
Technical characteristics:
Board size length x width [mm]) ........................................... 1000 x 500 mm +/- 3 mm L1 x W1
Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2
Evenness, as per SR EN 824 ..................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ........................................................... BS100 BS≥100
Compressive stress at a 10%, deformation, as per SR EN 826 ....................... CS10(60) CS≥60
Traction resistance, as per SR EN 1607 ................................................................... TR50 TR≥50
Thermal conductivity [W/m•K] ............................................................................................... 0,040
Adustion class, as per SR EN 13501-1 ............................................................ Euroclass B-s2,d0
EPS70
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
Cutting thickness [mm]:
As thermal insulation boards intended for:
- ventilated facades
- ETICS system facades (External thermal insulation composite systems)
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm])…………............................... 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 ................................................................ +/- 2mm /1 m S2
Evenness, as per SR EN 824 ................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 .....,,,,,,,,,,,,,,,,..................................... BS115 BS≥115
Compressive stress at a 10%, deformation, as per SR EN 826 ...................... CS10(70) CS≥70
Traction resistance, as per SR EN 1607 .................................................................. TR50 TR≥50
Thermal conductivity [W/m•K] .............................................................................................. 0,039
Adustion class, as per SR EN 13501-1 ........................................................ Euroclass B-s2,d0
16
17. expanded polystyrene thermal insulation materials
EPS80
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
As thermal insulation boards intended for:
- ventilated facades
- ETICS system facades (External thermal insulation composite systems)
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS150 BS≥150
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(80) CS≥80
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,038
Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0
EPS80+
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
Cutting thickness [mm]:
As thermal insulation boards intended for:
- ventilated facades
- ETICS system facades (External thermal insulation composite systems)
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS150 BS≥150
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(80) CS≥80
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,038
Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0
EPS100
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
Cutting thickness [mm]:
As thermal insulation boards intended for:
- average static load spaces, non –traffic terraces, under leveling concrete flooring
- ETICS system facades (External thermal insulation composite systems)
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
expanded polystyrene thermal insulation materials
Field of use:
Cutting thickness [mm]:
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS170 BS≥170
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(100) CS≥100
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,036
Adustion class, as per SR EN 13501-1 ........................................................... Euroclass C-s2, d0
EPS120
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
Cutting thickness [mm]:
As thermal insulation boards intended for:
- average static load (flooring), low traffic terraces, under leveling concrete flooring
- wood framing roofs, industrial roofing as subject to average mechanical stress
- ETICS system facades (External thermal insulation composite systems)
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS200 BS≥200
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(120) CS≥120
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,034
Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s1, d0
17
19. expanded polystyrene thermal insulation materials
BASF is the worldwide leader in the chemical field: The Chemical Company. The German Group
stands for a reliable partner of all industries and contributes to the increase of its partners’ success
by supplying high quality products, smart solutions and innovative technologies. The BASF Group is
represented in Romania by the BASF SRL company that was incorporated back in 1993.
In 2012, BASF entered into a co-branding partnership with Adeplast company, under which the
latter may use the Neopor® products in Romania, Hungary and the Republic of Moldavia. Under such
co-branding agreement, all packaging Neopor® based graphitized expanded polystyrene shall be
marked as “ Made of Neopor ® provided by BASF”, as a certification of the raw material that was used
for manufacturing purposes and as a highlight on the chemical industry world leader partnership.
BASF discovered more than 60 years ago a classic element, namely the expanded polystyrene, under
the EPS abbreviation. Under the Styropor® brand, EPS stands even nowadays for the global solution
to effective building thermal insulation or to product safe packaging. In 1995 BASF was awarded
the invention patent for Neopor®. With this new product range, BASF carried on and improved the
Styropor® product range performances. The new insulation material is expanded and processed as
foam blocks, panels/boards and moulded components. As for Neopor®, graphite was also added
to the raw material mix, which absorbs and reflects heat radiation and improves the EPS thermal
insulation capacity by up to 20%.
Neopor® is formed of small grey polystyrene granules (EPS) containing an expanding agent; this
unique raw material is further on processed in thermal insulation materials intended for a wide
range of applications.
Neopor®-made thermal insulation materials provide an increased thermal insulation capacity and
a raw material consumption of up to 50% lower than the conventional EPS.Thus, the products and
environment- friendly and thus both resource and cost effective for the client. The Neopor® ecological materials contain air cells that guarantee the preservation of technical conductivity throughout
the building’s operating life.
Neopor ® granules (EPS) expanded polystyrene –made insulation materials are resistant to damage
and aging as well as highly solid and stable size wise. Given such properties, the Neopor® systems
provide long-term insulation and permanent safety.
Prior to applying the exterior/outdoor insulation that is made of Neopor® insulating materials, you
must check the sub- layer load resistance capacity. The wall must be dried while the existing plaster
layer must be cavity-free and mobile part shall be removed. You must also first prepare the sandbased sub-layers or the layers having a larger absorption capacity. The Neopor® insulation boards
are mounted on the brickwork by means of adhesives/glues, dowels or mounting stands. The boards
shall be installed from the lower side towards the upper side so as to make sure that they are tightly
fixed to one another and that they are combined into the brickwork (avoiding intersection points).
The boards that are applied on all building corners must be joined under the dovetail shape. You
must make sure that the surface is flat both horizontally and vertically. Slight imperfections may be
corrected by applying an adhesive/glue while the edge prominences may be smoothed by abrasion.
In order to avoid fissures and to mechanically protect the façade, it is necessary that both indoor and
outdoor sides be reinforced. Such procedure is performed by means of a reinforcing material and
an adequate reinforcing fabric. Once the exterior insulation has completely dried, you shall apply
the protection exterior layer as final adequate plastering that must be compatible with the entire
system. As compared to alternative available products, Neopor® provides cost-effective advantages
that have a lower environmental impact, and also ecological solutions for a modern thermal protection.
GRAFIPLAST with Neopor® is featured under two compression- resistant versions:
- EPS80GR
- EPS100GR
Scope of use: as thermal insulation boards intended for: ventilated facades, ETICS system facades
(External thermal insulation composite systems)
Cutting thickness [mm]: as per SR EN823 the boards may be cut at 20, 30, 40, 50, 60, 70, 80, 90,
100,110, 120, 130, , 140, 150, 160 +/- 2 mm.
expanded polystyrene thermal insulation materials
ADEPLAST® - Neopor®: a long-term partnership
19
20. expanded polystyrene thermal insulation materials
expanded polystyrene thermal insulation materials
EPS150
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
Cutting thickness [mm]:
As thermal insulation boards, for:
- high static load spaces
- walk-on terraces, under average traffic flooring
as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS250 BS≥250
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(150) CS≥150
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,033
Adustion class, as per SR EN 13501-1 ............................................................. Euroclass B-s3, d0
EPS200
FIRE RETARDANT EXPANDED POLYSTYRENE BOARDS
Field of use:
As thermal insulation boards, for:
- highly increased static load spaces
- walk-on terraces
-under heavy and average traffic flooring
- refrigerator rooms flooring
Cutting thickness [mm]: as per SR EN823 ... 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150, 160 +/- 2 mm T2
Technical characteristics:
Board size length x width [mm]) .............................................. 1000 x 500 mm +/- 3 mm L2 x W2
Perpendicularity, as per SR EN 824 .................................................................. +/- 2mm /1 m S2
Evenness, as per SR EN 824 .................................................................................... +/- 5 mm P4
Bending resistance, as per SR EN 12089 ............................................................. BS250 BS≥250
Compressive stress at a 10%, deformation, as per SR EN 826 ……………....... CS10(200) CS≥200
Traction resistance, as per SR EN 1607 ................................................................ TR150 TR≥150
Thermal conductivity [W/m•K] .............................................................................................. 0,032
Adustion class, as per SR EN 13501-1 ....................................................................... Euroclass E
IPS
INJECTED EXPANDED POLYSTYRENE PERIMETER BOARDS
MW
MINERAL WOOL / BASALT MINERAL WOOL
Field of use:
Intended for wall and flooring insulation against heated spaces adjacent to ground/soil. The boards are
made by means of EPS- injecting machines. The surface on one side is provided with drainage striations
under a rhomboid structure. Perimeter step rabbet (SF) guarantees a thermal bridge-free insulation.
Competitive advantages: - extremely low water absorption, due to a very good juncture of expanded particles;
- very good resistance due to high volumetric density;
- 10 % better thermal insulation as compared to the regular expanded EPS boards.
Board sizes [mm]:
Perimeter thermal insulation board FF 30mm 1265 x 615 mm; 12,00 m² (0,360 m³)/Pack
Perimeter thermal insulation board SF 40mm 1265 x 615 mm; 9,00 m² (0,3600 m³)/Pack
Perimeter thermal insulation board SF 50mm 1265 x 615 mm; 7,50 m² (0,3750 m³)/Pack
Cutting thickness [mm]: 30; 40; 50 mm
Field of use:
Mineral wool has been used in the building industry for over 60 years and has proved to be a safe, efficient
and accessible insulation method. The wool insulation is of high performance and provides noise and fire
protection as well as advantages such as power savings, and thus has all the insulation and mechanical
relevant characteristics. The excellent thermal insulation properties allow for the reduction of home
heating or chilling costs. Since it is made of natural materials-sand, gross side materials – broken glass – it
helps reduce the power consumption and the atmosphere-released pollution emission, but also reduce
the weight on the base structure. The product resistance allows for an increased material compression and
guarantees that the product resumes its declared thickness, thus transportation, storage and warehousing
costs are significantly reduced.
Characteristics:
Mineral wool mattress featured as material rolls, thickness: from 50 mm, length: 10 m.
- thermal conductivity: λ = 0,040 W/mK
- fire resistance class A1
Basalt mineral wool board featured as rigid boards, thickness: from 20
- 200 mm, density 140 - 180 kg / m³.
- thermal conductivity: λ = 0,035 W/mK
- quality standard: SR EN 13162/2003
20
21. expanded polystyrene thermal insulation materials
EXPANDED POLYSTYRENE ADDITIVE-FREE VIRGIN BEADS
Field of use:
- flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring
- single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the
floorings, roofs and wood flooring
- to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing coverings
(precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- insulation of non walk-on bridges
-Insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast: synthetic
and hot or cold bituminous fluids, provided these are solvent-free)
- arch filling, also for the very thick ones
- roof coverings by means of asbestos-content cement boards, also with subsequent direct application of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- filling under the asphalt covering
- sub-layers for industrial flooring
Specific consumption:
in order to obtain 0,3 m³ of light concrete blanket/screed, with an apparent dry state density of 350 - 450
kg/ m³, please observe the following instructions:
- 1 bag of 250 liters virgin beads + 40 - 50 liters of water + 100 kg of cement
P-BLU
POLITERM BLU – E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS
Field of use:
-
-
-
-
-
-
-
-
-
- flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring
single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the
floorings, roofs and wood flooring (Please see the “Politerm Blu– Piano Zero” User’s Manual)
- to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing
coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- insulation of non walk-on bridges
- insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast:
synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- arch filling, also for the very thick ones
- roof coverings by means of asbestos-content cement boards, also with subsequent direct application
of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are
solvent-free)
- filling under the asphalt covering
- sub-layers for industrial flooring
- 3 to 6 mm granulation
expanded polystyrene thermal insulation materials
EPS-PV
Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below:
- 2 bags of 420 liters Politerm Blu + water + cement (*)
- 5 bags of 170 liters Politerm Blu + water+ cement (*)
(*) see prescribed dosage
P-BLU FEIN
POLITERM BLU FEIN - E.I.A ADDITIVATED EXPANDED POLYSTYRENE BEADS
Field of use:
-
-
-
-
-
-
-
- Improved compression resistance
- flooring and foundation sub-layers, spaces between floorings, roofs and wood flooring
single layer screeds for direct gluing of flooring materials, foundations and floorings, spaces between the
floorings, roofs and wood flooring
- to form biases on flat terraces and roofs, also with direct subsequent application of waterproofing
coverings (precast: synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- insulation of non walk-on bridges
- insulation of tarred roofs, also with subsequent direct application of waterproofing coverings (precast:
synthetic and hot or cold bituminous fluids, provided these are solvent-free)
- arch filling, also for the very thick ones
- roof coverings by means of asbestos-content cement boards, also with subsequent direct application
of waterproofing coverings (precast: synthetic and hot or cold bituminous fluids, provided these are
solvent-free)
- filling under the asphalt covering
- sub-layers for industrial flooring
- 2mm granulation
Specific consumption: in order to obtain 0,3 m³ of light blanket, please follow the instructions below:
- 2 bags of 420 liters Politerm Blu + water + cement (*)
- 5 bags of 170 liters Politerm Blu + water+ cement (*)
(*) see prescribed dosage
21
22. expanded polystyrene thermal insulation materials
expanded polystyrene thermal insulation materials
22
POLITERM BLU: EXTRA-LIGHT CONCRETES
Extra-light aggregates for thermal
insulation mortar preparation
MIXING PROCESS STEPS
Main instructions
Mixing drum preparation
In order to obtain 200 liters of finished product
1. water (*);
2. Politerm Blu or Politerm Blu Fein
(1 bag of 170 lt);
3. cement (*);
4. mix for 5 minutes by keeping the rotary mixing drum as horizontally
as possible;
5. mixing drum emptying
Politerm installation mixing
In order to obtain 1 m3 of finished product:
1. water (*) ;
2. first bag of 420 liters Politerm Blu or Politerm Blu Fein;
3. cement (*) ;
4. second bag of 420 liters Politerm Blu or Politerm Blu Fein;
5. keep mixing for 5 minutes;
6. then pump
Agitating truck preparation
1. water: as per recipe ( * ) less 20 - 30 liters (point 6)
2. Politerm Blu or Politerm Blu Fein;
3 mix for about 10 minutes at maximum speed
4. cement (*) ;
5. mix for about 10 minutes at maximum speed
6. clean the feeding hopper with approx. 20-30 liters of water (which
supplements the required water quantity)
7. On the route from the concrete station to the site, the agitating truck
shall mix for 20 minutes at maximum speed and then at minimum
speed.
23. expanded polystyrene thermal insulation materials
APPLICATIONS AND PRODUCTS
2
2
1
1
Acrylic
primer for
self-leveling
floor screed
3
3
5
5
4
4
6
6
7
7
10
10
8
8
9
9
TOP2
Indoor or
outdoor
cement floor blanket
11
11
foundation
basement
Thermal insulation floor blankets-one
layer - Direct application:
• Ceramic plates, stone, clinker and polished
marble flooring, 5
parquet-covered floating flooring.
• Parquet- after the application of a thin
layer of light blanket/screed. 8
• Flexible flooring (moquette, PVC...),
After the application of a thin layer of light
blanket /screed. 8
Also for:
• Terrace slope blankets/screeds 4
TOP1
Indoor or
outdoor
cement floor blanket
Building elements*
7
• Bricks:
• Cast Walls:
10
Intermediary layer filling
• leveling; 11
• under the sand + cement blankets; 8
• under self-leveling blankets;
• under floor heating 8
(also with direct application
of the heating pipe); 6
• arch leveling; 9
• under industrial flooring;
• under asphalt layer
• between walls 3
expanded polystyrene thermal insulation materials
Complementary
products
1
Roofing
• sloped roofing;
• flat roofs, with or without slopes;
• arched roofs;
• profile sheet roofing;
• asbestos-cement sheet roofing
sealing;
• direct application of waterproofing
membranes 2
* Mainly for compartmenting elements (which are not resistance structures). The project
designer is in charge with the resistance calculations pursuant to local standards.
FAST
SELF-LEVELING CEMENT BASED
SCREED 2-10mm
SELF-LEVELING
CEMENT-BASED
SCREED 2-10 mm
23
24. adhesives for plating
adhesives for plating
KITS FOR JOINTING
QK-6
QK-6
QUARZ KIT 2 - 6 mm
FLEXIBLE, AQUA-STATIC
KIT FOR JOINTING CERAMIC PLATES 2 - 6 mm
Application:
el
ickred
dar
kb
rick
-re
d
cho
col
ate
lig
ht
- ye
llo
w
ye
llo
w
sil
ve
rg
rey
ram
ligh
t br
mel
k ca
dar
cara
beig
ligh
t
antic
lue
dark b
blue
white
e
Consumption [kg/m²]:
Packaging:
filling joints with maximum width of 2-6 mm for ceramic tiles, marble, natural stone (except aged one),
granite and porcelain tiles for interior or exterior work, exposed to temperatures between -20 ° C and
+80 ° C in wet or dry environments.
Tiles size (cm)
15 x 15 20 x 20 20 x 30 30 x 30 40 x 40 50 x 50
Joint of 1 mm thick
0,15
0,13
0,12
0,10
0,05
0,04
Joint of 3 mm thick
0,45
0,39
0,36
0,3
0,15
0,12
Joint of 5 mm thick
0,75
0,65
0,6
0,5
0,25
0,2
1. Individual Package of 2 kg and 5 kg
- polyethylene package laminated in three layers, with vapour barrier and ultraviolet light filter
- the total thickness of the polyethylene layer is at least 0.12 mm
- shelf life of the product in the original package, unopened 2 YEARS!
2. Cart-board box package that contains:
- 5 bags of 5 kg
- 12 bags of 2 kg
3. Euro-pallet wrapped with 28 boxes:
-28 boxes x 5 bags x 5 kg = 700 kg
-28 boxes x 12 bags x 2 kg = 672 kg
t
igh
ey
gr
l
d
ark
y
gre
p
rey
lg
o
etr
n
row
lig
b
ht
k
dar
wn
bro
ck
bla
n
ocea
e
ochr
olive
polar
retro
red
pink
terracotta
Color Pallet QK-6
30 shades
24
QUARZ KIT 2 - 6 mm
green g50
green g57
violet
25. adhesives for plating
adhesives for plating
very high
flexibility
high resistance to
traffic
low water
absorption
high resistance to
cracking
The transparent area of the package shows the original color of the premixed QK-6 or QK-15 used for finishing joints tiles.
QK-15
QUARZ KIT 5 - 15 mm
FLEXIBILE, AQUA-STATIC
QK-15
KIT FOR JOINTING CERAMIC TILES 5 - 15 mm
Application:
filling the joints with maximum width between 5-15 mm, of ceramic tiles, tiles, marble, natural stone
(except old ones), granite, porcelain tiles, for interior or exterior work, exposed to temperatures between
-20 ° C and +80 ° C in wet or dry environments.
Consumption:
between 0.8 to 1.5 kg / m², depending on the size of the plates and of the joints.
For correct calculation of the specific consumption necessary tests are needed at the application site, on a small area.
Packaging:
1. Individual package of 5 kg
- laminated polyethylene package, in three layers with vapour barrier and ultraviolet light filter.
- the total thickness of the polyethylene layer is at least 0.12 mm
- shelf life of the product in the original package, unopened 2 YEARS!
2. Cart-board box package that contains:
- 5 bags of 5 kg
3. Euro-pallet wrapped with 28 boxes:
- 28 boxes x 5 bags x 5 kg = 700 kg
ligh
col
dark
t gr
ey
ate
ite
ram
wh
ige
be
ca
cho
el
grey
brown
black
ocean
polar
otta
c
terra
en
gre
Color Pallet QK-15
12 shades
QUARZ KIT 5 - 15 mm
25
26. thermal insulation system adhesives/glues
thermal insulation system adhesives/glues
THERMAL INSULATION SYSTEMS – ADHESIVES/GLUES, SPATULA MASS
Adhesive/glue and spatula mass placing guide for thermal
insulation system application.
1
2
4
3
5
6
SUPPORT SURFACE:
The support surface must be clean, rigid, without detached parts and well hardened; it must also be at
least 28 days old. The surface must be checked by hammer in order to see if it presents sufficient plating
resistance.
NECESSARY TOOLS: - bucket – mechanic or manual mixer; - trowel; - teethed grouter 6 x 6 mm, to 12 x 12
mm; - level instrument
PREPARATION AND PLACING METHOD:
Put the powder into water and begin mixing. Both the container and the water must be clean. It is
recommended that you mix at one time a quantity that will be used within one hour. Mix energetically
and preferably mechanically (attach a blade shaft to the electric boring mill) in order to obtain a creamy,
homogeneous, easily processable mix, with an adequate fluidity. If you ad an insufficient water quantity,
the product may loose its adhesive properties. Wait for 10 minutes to allow chemical reactions to take
place and then resume firm mixing. For flat, plastered surfaces, the adhesive/glue shall be placed on the
entire polystyrene board surface, by using a 10-12 mm teethed grouter then press the board onto the
insulation surface. For subsidence surface, the paste shall be placed onto the polystyrene board as spots at
approximately equal distances of 15 to 20 cm and on the edge as a broad stripe of 3 to 4 cm, so as to ensure
at least 40-50% covering out of the entire polystyrene board surface (check periodically). The polystyrene
board is then pressed onto the insulation surface. The final straight surface is obtained by pressing several
boards onto the surface by means of wood or metal long straight edge. The mineral wool rigid board shall
be placed on the surface by means of an 8x8 mm to 12x12mm teethed grouter. The paste is placed on the
support surface in a 4 to 5 mm layer, then rake by using the teethed grouter. The paste thus placed on the
support shall keep its adhesive properties for at least 20 minutes. The paste adhesive capacity is checked
by touching the surface with the fingers of the aloof hand. The paste sticking to the fingers stands for
an adequate adhesiveness. 24 hours after placement, the thermal and noise insulating boards must be
dowelled by 4- 6 dowels/ m², and then the same adhesive must be placed on the polystyrene board or on
the rigid mineral fiber board by using a 6 x 6 mm up to 10 x 10 mm teethed grouter. Starting from the top
side of the surface, roll a glass fiber net provided with 5 x 5 mm up to 10x 10 mm meshes and then press
on the formed stripes. Use the right side of the grouter to uniformly insert inside the adhesive/glue. The
net rows shall be lapped over on portions of at least 10 cm; in case of window and door corners you must
provide additional reinforcing by means of reinforcing net stripes of at least 20 cm length and width. It is
recommended to use an anti-alkali treated reinforcing net weighing at least 145 g/m². The thus obtained
surface shall be finished also by using the polystyrene adhesive/glue until you obtain a flat surface that is
ready for decorative products application.
CAUTION: IN CASE OF HIGHLY ABSORBENT SURFACES, SUCH AS BCA, OLD OR NEW BUT HIGHLY ABSORBENT
BRICK, etc, PRIOR TO POLISTIROL GLUING YOU MUST PRIME THE SURFACE BY MEANS OF A CEMENT SPRAY
AND THEN LET IT DRY FOR ABOUT 2 HOURS.
SURFACE BECOMES USABLE: The surface may be covered or finished at least 72 hours later, with all organic
solvent-free known materials. It is recommended that you use expanded and extruded polystyrene for
insulation purposes and to cover with decorative structured plasters of the ADEPLAST® COLOR SYSTEM
product range, as final finishing layer.
1. corner board
mounting.
2. dowel fixing.
3. corner dowelling.
4. corner reinforcement
(net profile).
5. spatula procedure
(net embedment in the
spatula mass)
6. net overlapping
procedure
7. window and door
additional reinforce-
7
PSP
POLISTIROL PREMIUM – POLYSTYRENE INTENDED ADHESIVE/GLUE AND SPATULA MASS
Scope of use:
Specific consumption:
26
For thermal and noise insulation works by means of
expanded and extruded polystyrene for facades, as well
as for polystyrene or rigid polyurethane ornaments
gluing, for indoor or outdoor purposes. ONLY APPLY
ON MINERAL SUPPORTS. DO NOT APPLY ON WOODEN, PLASTIC, METAL, etc SUPPORTS.
board gluing: 2,5 - 3,5 kg/m²
board covering: 2,5 - 3,9 kg/m² - 6x6 grouter
3,9 - 5,5 kg/m² - 8x8 grouter
Product code:
Packaging:
Pallet Stand:
Quality Standard:
psp
bags of 25 kg
48 bags/pallet 1200 kg
SR EN 1015-12:2002
27. thermal insulation system adhesives/glues
POLISTIROL PREMIUM WHITE – POLYSTYRENE ADHESIVE/GLUE AND SPATULA MASS
Scope of use:
Specific consumption:
PS-ECO
For thermal and noise insulation works by means of
extruded and expanded polystyrene for facades, as
well as for polystyrene or rigid polyurethane ornament
gluing, for indoor or outdoor purposes. APPLY ONLY
ON MINERAL SUPPORTS. DO NOT APPLY ON WOOD,
PLASTIC OR METAL, etc SUPPORTS.
board gluing: 2,5 - 3,5 kg/m².
board covering: 2,5 - 3,9 kg/m² - 6x6 grouter
3,9 - 5,5 kg/m² - 8x8 grouter
Scope of use:
For thermal and noise insulation works, only for
expanded polystyrene gluing, for indoor or outdoor
purposes, on mineral supports (cement-lime plasters,
brick, concrete).
board gluing: 2,5 - 3,5 kg/m².
Scope of use:
For expanded and extruded façade intended polystyrene covering (by means of spatula), for both indoor
and outdoor works. By using the ADEPLAST REINFORCING FIBER POLISTIROL product, you shall obtain
highly flexible surfaces with an increased adherence of
the glass fiber net to the polystyrene board.
ps-eco
bag of 23 kg
48 bags/pallet 1104 kg
SR EN 1015-12:2002
board covering: 2,5 - 3,5 kg/m² - 6x6 grouter
3,5 - 4,5 kg/m² - 8x8 grouter
Product code:
Packaging:
Pallet Stand:
Quality Standard:
ps-fa
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 1015-12:2002
EXPANDED POLYSTYRENE ADHESIVE/GLUE FOR WOODEN SUPPORT APPLICATION
Scope of use:
Specific consumption:
MW-KLEBER
Product code:
Packaging:
Pallet Stand:
Quality Standard:
SUPER POLISTIROL – REINFORCING FIBERS ADHESIVE/GLUE AND SPATULA MASS
Specific consumption:
OSB-KLEBER
psp-alb
bag of 25 kg
48 bags/pallet1200 kg
SR EN 1015-12:2002
POLISTIROL €CO – EXPANDED POLYSTYRENE ADHESIVE/GLUE
Specific consumption:
PS-FA
Product code:
Packaging:
Pallet Stand:
Quality Standard:
thermal insulation system adhesives/
PSP WHITE
For thermal and noise insulation by means of façade intended expanded and extruded polystyrene, both indoors
and outdoors, on OSB supports, as well as for thermal
insulation works in extreme weather areas, where the
day-night and winter-summer temperature variations are
really high. O.S.B. KLEBER may also be delivered as paste
version. This may be used also for ceramic plates gluing to
wooden support.
board gluing: 2,5 - 3,5 kg/m².
board covering: 2,5 - 3,9 kg/m² - 6x6 grouter
3,9 - 5,5 kg/m² - 8x8 grouter
Product code:
Packaging:
Pallet Stand:
Quality Standard:
osbk
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 1015-12:2002
Product code:
SAAP0
Packaging:
bucket of 25 kg
Pallet Stand:
24 buckets/pallet 600 kg
Technical Approval: product approved by
INCERC s.a.
MINERALWOOL KLEBER – BASALT MINERAL WOOL ADHESIVE/GLUE
Scope of use:
Specific consumption:
For thermal and noise insulation works by means of
basalt mineral wool mattresses, for indoor or outdoor
purposes.
ONLY APPLY ON MINERAL SUPPORTS. DO NOT
APPLY ON WOOD, PLASTIC, METAL or similar
supports.
2,5 - 3,9 kg/m² - 6x6 grouter
3,9 - 5,5 kg/m² - 8x8 grouter
Product code:
Packaging:
Pallet Stand:
Quality Standard:
mw-kleber
bag of 25 kg
48 bags/pallet 1200 kg
SR EN 1015-12:2002
27
28. drainage products – RENOWA range
drainage products- RENOWA range
Intended for the
RENOWA DRAINAGE SYSTEM
Intended for his- rehabilitation of
torical monuments salts and humidand buildings therity-affected
mal restoration and
brickworks
drainage
RENOWA Drainage procedure
The drainage procedure implies rehabilitation of
the building sections having been affected by salt,
humidity and fissures, as a consequence to brickwork mortar degradation.
By using the RENOWA drainage system materials,
you shall obtain a long-lasting, high quality finish.
The RENOWA system composing products performance implied the use of special raw materials,
such as salt and sulphate resistant cement, special
hydrophobization agents, additives intended for
the creation of mortar pores of less than 30 microns, etc.
RENOWA system advantages
28
• Salt elimination without using chemical products
• All products within the system are perfectly
compatible
• System is verified, with time efficiency
specification (at least 20 years)
• Very good adherence for each layer
• System may be applied both manually and
mechanically
• Product high exploitability level in both cases
• System products are tested within company’s
own laboratory
• Controlled quality products
• Intended for both indoor and outdoor
purposes
• Water repellent mineral plasters and paints
with high vapor diffusion capacity
• High quality finishes resulting in extremely
smooth surfaces
• Also recommended for the foundation areas
restoration
• AEROQ certified system, pursuant to European
standards
29. drainage products- RENOWA range
SAGTC
ROUGH COAT FOR DECORATIVE PLASTERS
Specific consumption:
SIT
Packaging:
Pallet Stand:
Quality standard:
RW-W
Intended for the priming of all plaster covered surfaces
(lime smoothed plasters, lime-cement, cement, spatula
mass), gypsum board, painted (or with decorative plasters),
new or old but well adherent, for both indoor and outdoor
purposes, as a layer preceding the finishing of silicone and
styrene-acrylic plasters for foundation and thermal systems.
SILICONE DECOPLAST – STRUCTURED DECORATIVE PLASTER
Scope of use:
Intended for impressive decorative coverings and finishes, for both indoor and outdoor works. The products may
be applied on any type of mineral supports: plaster, polishing plaster coats, concrete, brickworks, gypsum boards,
etc. Professional quality, easy application, single layer.
Coloring:
The product is delivered already colored by the manufacturer depending on the beneficiary’s option, and based
on the ADEPLAST® color pallette, or it may be delivered in white and then later on shaded upon application by
means of coloring pastes.
Specific consumption: - Smoothed plaster: 1,5 mm - 2,5 kg/m²
- Scuffed plaster: 2,0 mm - 2,8 kg/m²
Instructed consumption refers to perfectly flat surfaces and varies depending on the layer thickness
and the support surface characteristics. This is why our company takes no responsibility regarding the
28 kg bucket.
material requirements for each case in particular.
24 buckets/ 672 kg pallet.
* please see page 9 for product codes and details.
SR EN 15824:2009.
RENOWA-W PLASTER MORTAR FOR OLD BUILDINGS DRAINAGE
Scope of use:
Drainage plaster mortar for brickwork leveling, under
manual or mechanical application. Extremely good
adherence; ensures desalinization and dehumidification of salt and humidity-attacked structures. One layer
thickness: 2 cm.
approx.10,0 kg/m² at 10 mm applied layer thickness
Product code:
Packaging:
Pallet Stand:
Quality Standard:
RW-W
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
5 94576 2 003768
RENOWA-L PLASTER MORTAR FOR DRAINAGE AND LEVELING
Scope of use:
Drainage plaster mortar for brickwork leveling, as
support layer for the RENOWA-W mortar, under both
manual and mechanical application. Very god adherence; salt shrinkage high capacity and water vapor
permeable. One layer thickness: 2 cm.
Specific consumption:
RW-SPZ
5 94576 2 003423
Approx.150 - 350g/m² (1kg / 3 - 6 m², depending on the
treated support roughness)
Specific consumption:
RW-L
Product code: SAGTC
Packaging:
bucket 24 kg
Pallet Stand:
24 buckets/pallet 550 kg
Technical Approval: product approved by
INCERC s.a.
drainage products – RENOWA range
Scope of use:
approx. 10,0 kg/m² at 10 mm applied layer thickness.
Product code:
Packaging:
Pallet Stand:
Quality Standard:
RW-L
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
5 94576 2 003751
RENOWA SPRITZ CEMENT DROP
Scope of use:
Specific consumption:
Drainage systems intended cement drop; sulphate-resistant; provides brickwork salts transportation to the
next plaster layers in the drainage system; manual
application.
approx. 3,0 - 5,0 kg/m².
Product code:
Packaging:
Pallet Stand:
Quality Standard:
RW-SPZ
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
29
30. Brickwork mortars
Brickwork mortars
BRICKWORK MORTARS
Glass brick mortar placement guide
PREPARATION METHOD:
Mix one 25 kg bag with approximately 4,75 - 5,5 liters of water.
Put the powder into the water and then mix vigorously, preferably mechanically, until you obtain a creamy,
homogenous and easily exploitable mixture. It is recommended to mix at one time a quantity that may be
used within 2 hours maximum. Wait for 10 minutes in order to allow chemical reactions to take place then
resume vigorous mixing.
The mixing drum mixing time is 5 to 10 minutes.
30
REQUIRED TOOLS:
- bucket
- manual or mechanic mixer
- trowel
- cross-type spacers
PLACEMENT METHOD:
The material shall be dispersed over the free edges of the glass brick; place a 5-10 mm spacer between the
bricks in order to get uniform joints. If the glass brick geometry so allows, also insert a steel wire armature
at each brick row. Upon finishing each layer, clean the mortar excess off the bricks. 72 hours later you may
perform jointing also using the ADEPLAST® MZ /GLASS glass brick mortar.
If you intend to obtain an extra finished surface, use the ADEPLAST®
GU or ADEPLAST® SGC cement polishing plaster coat (super cement polishing plaster coat) for finishing
purposes.
The adhesive mortar for glass brick walling- ADEPLAST® MZ-GLASS – simplifies bricking, considerably
reduces material consumption and drastically reduces work time.
The cutback on the mortar layer thickness also results in the heat loss reduction!
31. Brickwork mortars
MZ-BCA
BCA BLOCKS WALLING MORTAR
BCA size / Consumption in kg / m² of BCA /
Square meters that may be built on 1 bag - 25 kg
NUT and FEDER - 60x20x25 approx. 3,8 kg approx. 6,5 m²
NUT and FEDER - 60x30x25 approx. 5,7 kg approx 4,3 m²
Regular BCA - 60x20x25 approx 6,3 kg approx. 3,9 m²
Regular BCA - 60x30x25 approx 9,5 kg approx. 2,6 m²
Scope of use:
Intended for concrete, brick or light concrete blocks
walling.
approx 1,5 - 1,8 kg/m², at a 1 mm layer thickness;
Approx. 156 kg of dried mortar for 1 cubic meter of hole
brick
Scope of use:
Intended for glass brick walling. To be used at temperatures exceeding +5°C.
1 ADEPLAST mortar bag for glass brick walling is
enough for a 3,5 m² glass wall with joints of an average
10 mm thickness.
mz5
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-2:2011
Product code:
Packaging:
Pallet Stand::
Quality Standard::
mz-sticla
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-2:2011
Product code:
Packaging:
Pallet Stand::
Quality Standard::
mzsticla-alb
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-2:2011
Product code:
Packaging:
Pallet Stand::
Quality Standard::
beton-fix
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 1504-6:2007
GLASS BRICK WALLING WHITE MORTAR
Scope of use:
Intended for glass brick walls bricking. To be used at
temperatures exceeding +5°C.
Specific consumption:
BETON-FIX
Product code:
Packaging:
Pallet Stand::
Quality Standard::
GLASS BRICKS WALLING MORTAR
Specific consumption:
MZ-STICLA ALB
mzbca
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-2:2011
CONCRETE AND BRICK BLOCKS WALLING MORTAR
Specific consumption:
MZ-STICLA
Product code:
Packaging:
Pallet Stand::
Quality Standard::
Brickwork mortars
Intended for BCA blocks and light concrete blocks.
Specific consumption:
MZ-5
Scope of use:
1 ADEPLAST glass brick walling is enough for a 3,5 m²
glass wall, with joints of an average 10 mm thickness.
MONOLITHIZATION SPECIAL MORTAR
Scope of use:
Specific consumption:
–for machine foundation anchorage, metal and
concrete poles
-for filling, leveling and sub-casting for concrete poles
and beams
-for the anchorage of support parts for metal structures, machines, etc.
- for the anchorage of structure metal elements
- sub-casting works performance
approx. 1,9 - 2,0 kg / filled cavity liter
31
32. Brickwork mortars
Brickwork mortars
BETONFIX – ADEPLAST monolithization solution
Compensated contractions monolithization-intended special fluid mortar.
Structure metal elements
anchorage
Support parts
anchorage for metal
structures, machines,
etc.
Sub-casting work
performance
TECHNICAL DATA:
- color: grey
- granulation: 4,0 mm maximum
- composition: cement, sand, special additives
- water requirement: 12% (normal consistency)-13% (fluid consistency); be
tween 3.6-3.9 liters / 30 kg bag)
- intended for: sub-casting and fixing, up to 60mm thickness, no contractions.
This product type may be used for machine foundation anchorage, for metal and
concrete poles, for filling, leveling and sub-casting of poles and concrete beams,
for support parts anchorage for metal structures, machines, structure metal elements or for the sub-casting works performance.
The product preparation is carried out by inserting the powder into the water
and by mixing. Both the container and the water must be clean. Mixing shall be
performed at low speed and preferably mechanically, in order to avoid excessive
air, until you obtain a homogenous, fluid, easily exploitable mix that is clog and
agglomeration- free.
32
The product is packaged as 30kg bags, with a specific consumption of 1,9 - 2,0
kg/filled cavity liter.
The specific consumption is of approximately 1.9-2.0 kg/filled cavity liter, the layers’ thickness goes up to 600 mm. Product applicability subsequently to water
mixing is of approximately 30 minutes, at an environmental temperature of +5°C
to +30°C.
The support surface must be load-bearing, hardened and at least 28 days old,
clean, dust-free, adherent and compact, dried and with no fissures, cracks, greases, friable debris, salts.
Cast the resulting mix on one side of the cavity to be filled, under continuous flow,
in order to allow the air to exit the mix. After casting, the mortar shall be protected against water evaporation, by spraying water over the cast surface within the
first 24 hours from casting.
34. Gypsum board system
Gypsum board system
GYPSUM BOARD SYSTEM – ADHESIVE/GLUE, JOINT FILLER, POLISHING
PLASTER COAT
Gypsum boards joint filler placement guide
34
SUPPORT SURFACE:
The product shall be applied on clean, grease-free, dust-free and impurities-free gypsum boards
(plaster boards). In case of size cut boards, deepen the joint as in a V-shape by acclive cutting the
boards.
WATER MIXING APPLICABILITY:
- for 1 hour
REQUIRED TOOLS:
- bucket
- manual or mechanical mixer
- spatula
TOOL CLEANING:
- with water, prior to hardening
ENVIRONMENTAL TEMPERATURE:
- between +5°C and +30°C. Avoid working under direct sun light.
PLACEMENT AND PREPARATION METHOD:
Insert the powder into the water. Let it rest for 2-3 minutes for maceration purposes, and then
mix vigorously and mechanically, preferably (attach a blade shaft to an electric boring mill). Keep
mixing until you obtain a very creamy, easily exploitable, homogenous mix that is clog-free. The
thus obtained mix is then inserted into the joints and then covered with a glass fiber stripe that
is then covered with another joint adhesive/glue layer for gypsum. The adhesive/glue surface
is smoothed by means of a grouter so as to obtain uniform surface for the entire board. Besides
the recommendations above, it is important that all effective norms and standards be complied
with. Guaranteed characteristics are based on practical experience and performed tests. Location
and application specific conditions may differ from those presented herein; thus, a correct and
successful use of our products is not included in our responsibility scope.
35. Gypsum board system
GIPSCARTON FIX – GYPSUM BOARD GLUING ADHESIVE
Scope of use:
Specific consumption:
KGC-50
Intended for the gluing of gypsum boards on mineral
support. The support surface may be concrete, brick,
voussoirs, BCA, ceramic blocks, mechanically resistant
plaster, etc. ONLY APPLY ON MINERAL SUPPORTS. DO
NOT APPLY ON WOODEN, PLASTIC, METAL or similar
supports.
5kg/m2 depending on the support surface specific
conditions
agc
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 12860:2003
Product code:
Packaging:
Pallet Stand
Produkt Standard:
kgc20
bag of 20 kg
48 bag/pallet 960 kg
SR EN 12860:2003
Product code:
Packaging:
Pallet Stand
Produkt Standard:
kgc3x5
cutie de 3 x 5 kg
32 cutii/pallet 480 kg
SR EN 12860:2003
GYPSUM BOARD JOINTING FILLER KIT
Scope of use:
Specific consumption:
Intended for indoor works, for gypsum board joint
filling by means of reinforcing glass fiber stripes.
ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY
ON WOODEN, PLASTIC, METAL or similar supports.
5 - 10 m filler / kg.
Product code:
Packaging:
Pallet Stand
Produkt Standard:
GLET-FIX
Product code:
Packaging:
Pallet Stand
Produkt Standard:
Gypsum board system
AGC
kgc05
pungă de 5 kg
96 png./pallet 480 kg
SR EN 12860:2003
POLISHING PLASTER COAT COMPOSITION FOR GYPSUM BOARDS COATING
Scope of use:
Specific consumption:
Intended for gypsum board surfaces finishing inside
housing buildings, in order to obtain extremely fine and
smooth surfaces, which may then be covered basically
with any paint type.
ONLY APPLY ON MINERAL SUPPORTS. DO NOT APPLY ON
WOODEN, PLASTIC, METAL or similar supports.
Product code:
Packaging:
Pallet Stand
Produkt Standard:
gletfix
bag of 20 kg
48 bag/pallet 960 kg
SR EN 12860:2003
approx. 0,5 kg/m².
35
36. Floor screeds, industrial flooring
Floor screeds, industrial flooring
FLOOR SCREEDS AND INDUSTRIAL FLOORING
Self-levelling floor screed placement guide
SUPPORT SURFACE:
The support surface must be hardened and at least 28 days old, clean, dried, fissure and crack-free, adherent and compact, grease-free; it must not have any chemical adhesive debris left from existing covering
removal, no friable debris, no salts, with a minimum 150 mark. The surface must be dusted, mechanically
and chemically cleaned (if applicable) until you obtain a load-bearing layer that is perfectly adherent and
clean.
The next step is to cast an ADEPLAST® ACRYLIC PRIMER layer that connects the concrete layer to the
self-leveling screed and uniforms the sub-layer absorption level. In case of completely non-adherent
surfaces (such as old floor tiles, mosaic, shiny smoothed cement, etc), previously apply a two-component
epoxy primer in order to create a connection bridge between the sub-layer and the self-leveling floor creed
(please consult with the epoxy products manufacturers).
REQUIRED TOOLS: - bucket – mechanic or manual mixer - trowel; - rubber pin roller - leveling board
PLACEMENT AND PREPARATION METHOD:
Insert the powder into the water and begin mixing. Both the container and the water must be clean. Mix
carefully and mechanically, preferably (attach a blade shaft to an electric boring mill and mix at low speed)
so as to prevent air bubbles to form inside the mix, until you obtain a creamy, homogenous and easily
exploitable product. Wait for 10 minutes in order for the chemical reactions to take place. The self-leveling
screed is then cast on the surface to be leveled at the consistency of a fluid sour cream; then level over
the surface by using a trowel. No water mirror must be formed on the cast screed surface. All possible air
bubbles must be eliminated from the screed surface, by means of a rubber pin roller; then level the surface
by means of a broad leveling board.
SURFACE BECOMES USABLE:
After no less than 24 hours, for floor tile covering. After no less than 72 hours for parquet or
moquette placing. The hardening time is extended at temperatures below 20°C.
SPECIAL RECOMMENDATIONS:
- do not use for heavy walk-on traffic flooring (industrial facilities)
- in case the product is to be applied over the floor heating system, cut the heating at least 24 hours
before placement and restart the system only after final hardening.
- in case of large surfaces, allow for dilation joints ( at distances of 4 to 7 m).
- avoid self-leveling screed casting when the night temperature may drop under +5°C.
SA 2-10
2-10mm INDOOR SELF-LEVELING FLOOR SCREED
Intended for the leveling of inside surfaces of cement
screeds and of concrete surfaces, etc., to the purpose
of warm covering (linoleum, PVC slab) and moquette,
parquet, floor tile covering, warehouse or basement
final layer, etc.
Specific consumption:
SAR 2-10
Scope of use:
approx. 1,6 - 1,8 kg/m² at 1 mm applied layer thickness
sa210
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 13813:2003
2-10mm FAST INDOOR SELF-LEVELING FLOOR SCREED
Scope of use:
Specific consumption:
36
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
Intended for the leveling of inside surfaces of cement
screeds, of concrete surfaces, etc, to the purpose of
warm covering (linoleum, PVC slabs), moquette,
parquet, floor tile covering, where walk-on traffic is
required 3 hours after screed casting.
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
approx. 1,5 - 1,8 kg/m² at 1 mm applied layer thickness.
sa210-r
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 13813:2003
37. Floor screeds, industrial flooring
TOP 1
INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC
approx. 1,8 - 1,9 kg/m² at 1 mm applied layer thickness.
Scope of use:
Intended for the leveling of indoor and outdoor cement
screeds and of concrete surfaces, etc, to the purpose of
warm covering (linoleum, PVC slabs), moquette, parquet and floor tile covering, for swimming pool bottom
covering prior to painting, as final layer for housing
facilities, basements, etc.
approx. 1,8 - 1,9 kg/m² at 1 mm applied layer thickness.
Scope of use:
Intended for repair works or reduced space concreting,
for garden and house slight improvements, where
small quantities are required of this type of product.
top2
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 13813:2003
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
hb-cg
bag of 30 kg
42 bag/pallet 1260 kg
007-01/172-2009
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
nsp01
bag of 25kg
48 bag/pallet 1200 kg
SR EN 13139:2003
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
pic300
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 13813:2003
approx. 1,8 - 2,0 kg/m² at 1 mm applied layer thickness.
0,1 - 1,0 mm BUILDING SAND
Scope of use:
Specific consumption:
PIC300
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
HOBBY HOUSE AND GARDEN CONCRETE
Specific consumption:
NSP
top1
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 13813:2003
INDOOR AND OUTDOOR CEMENT SCREED FOR HEAVY WALK-ON TRAFFIC
Specific consumption:
HB-CG
Product code:
Packaging:
Pallet Stand:
Produkt Standard:
Floor screeds, industrial flooring
Intended for regular screeds, on classic supports, as
regular screed or as base layer for the self-leveling
screed, for indoor or outdoor surface leveling.
Specific consumption:
TOP 2
Scope of use:
preparation of plastering mortars, floor screeds, brickwork mortars, by adding cement and/or lime.
as per the material recipes in use
COLORED INDUSTRIAL FLOORING
Scope of use:
To be used in order to obtain long lasting and resistant
flooring, inside industrial facilities and intensive walkon traffic (stores, schools, hospitals, etc).
Specific consumption:
approx. 4 - 5 kg/m².
37
38.
39. Floor screeds semi-mechanized performance
ADVANTAGES:
- increased productivity of up to 3 to 5 times
- material loss and theft elimination
- constant quality of prepared material
- ecologic storage method (elimination of paper and plastic
bags)
- increased work place cleanness level
1. STORAGE
The ADEPLAST silo fleet allows for the storage of 18 m³ of
material under safe and ecologic conditions. Thus, we save
significant bag quantities that require management and
recycling.
2. TRANSPORTATION
In order to transport screed dried pre-mixtures from the
silo to the mixing pumps, we use m-tec F100 / F140 pneumatic transport installations.
3. MECHANIZED MIXING
To the purpose of water mixing as per specific recipes, we
use m-tec D-20/D-30 product mixing continuous mixers.
4. FLOOR SCREED PLACEMENT
The procedure is carried out manually, as per the technologies instructed under the product technical data sheets.
The leveling stage may be mechanically performed by
means of concrete leveling machines (helicopters).
40. Plastering mortars
Plastering mortars
MINERAL PLASTERS
Manually applied plastering mortars
KLASIKO
CLASSIC PLASTERING MORTAR
For indoor and outdoor coarse plastering works that
are only manually performed, in order to get plastered
surfaces prior to applying the finishing plasters of the
ADEPLAST® TINCI or ADEPLAST® MSF type.
Specific consumption:
TINCI
Scope of use:
approx. 12,0 - 15,0 kg/m² at 1 cm thickness
Scope of use:
Scope of use:
Product code:
Packaging:
Pallet Stand
Product Standard:
tinci
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
For indoor or outdoor coarse plastering finishing works,
prior to polishing plaster coat or other noble finishing
products application, in order to obtain white-colored
surfaces; repair of fissured and unleveled coarse plasters; fine plaster layer; surface leveling prior to faience
works; surface leveling prior to applying colored noble
mortar; surface leveling prior to painting
approx. 3 - 4 kg/m²
Product code:
Packaging:
Pallet Stand
Product Standard:
tinci-alb
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
EXTRA FINE, EXTRA PLASTIC MORTAR FOR PLASTERING AND REPAIR
Scope of use:
Specific consumption:
40
For the finishing of indoor and outdoor coarse plastering works, prior to applying polishing plaster coats or
other noble finishing products, in order to finish coarse
plasters; repair of unleveled and fissured coarse plasters; fine plaster layer; surface leveling prior to faience
works; surface leveling prior to applying colored noble
mortar; surface leveling prior to painting.
approx. 3 - 4 kg/m²
CLASSIC PLASTERING WHITE MORTAR
Specific consumption:
MSF
klasiko
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-2011
CLASSIC PLASTERING MORTAR
Specific consumption:
TINCI ALB
Product code:
Packaging:
Pallet Stand
Product Standard:
For coarse plastering finishing works, prior to polishing
plaster coat or other noble finishing products application; indoor or outdoor, coarse plaster finishing works;
repair of fissured and unleveled coarse plastering; fine
plaster layer; surface leveling prior to faience applying;
surface leveling prior to colored noble mortar application; surface leveling prior to painting.
approx. 3 - 4 kg/m²
Product code:
Packaging:
Pallet Stand
Product Standard:
msf
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
41. Plastering mortars
EDELPUTZ WHITE – MINERAL DECORATIVE PLASTERING
For the finishing of indoor or outdoor cement-based or
cement-calcium lime based mineral plasters, as well as
on other mineral bases, in order to obtain “stone dust”
type smoothed surfaces of up to 2,0 mm granulation.
Specific consumption:
EDP-AN
Scope of use:
approx. 4,0 - 5,0 kg/m².
Scope of use:
For the finishing of indoor or outdoor cement-based
and cement-calcium lime based mineral plastering, as
well as on other mineral bases, in order to obtain “stone
dust” type smoothed surfaces of an up to 2,0 mm
granulation.
approx. 4,0 - 5,0 kg/m².
Product code:
Packaging:
Pallet Stand
Product Standard:
edpanat
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
Product code:
Packaging:
Pallet Stand
Product Standard:
hstp1000
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
Product code:
Packaging:
Pallet Stand
Product Standard:
mai
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
HYDROSTOP 1000 – WATERPROOFING MORTAR
Scope of use:
To be used with waterproofing plasters for high humidity areas (bathrooms, kitchens, cellars, basements, etc.);
it is particularly intended for water basin, swimming
pool plastering works, for external wall plastering and
heavy water exposure façade plastering works.
Specific consumption:
MAI
edpalb
bag of 25 kg
48 bag/pallet 1200 kg
SR EN 998-1:2011
EDELPUTZ NATURE-WHITE – MINERAL DECORATIVE PLASTERING
Specific consumption:
HS1000
Product code:
Packaging:
Pallet Stand
Product Standard:
Plastering mortars
EDP-A
approx. 12 - 16 kg/m² for each thickness cm, depending
on the surface shape
EXTRA-PLASTIC,ANTI-DAMPNESS MORTAR
Scope of use:
Intended for dampness walls, such as: bathrooms,
corridors, old houses, both indoors and outdoors.
Specific consumption:
approx. 10 - 18 kg/m² for each thickness cm.
41
42. Plastering mortars
Plastering mortars
Mechanized application plastering mortars
WHY ?
100
%
ADEPLAST®
MOBILE SILO
400
%
200
%
PRODUCTIVITY
PRODUCTIVITY
PRODUCTIVITY
MECHANIZATION LEVEL
LOWissues:: lack of space
Negative
dirt, dust, inconsistent quality, increased
performance time “
ADVANTAGES: Lack of skilled workers
MECHANIZATION LEVEL
MECHANIZATION LEVEL
PRIMARYwater is manually added,
Negative issues: the
mixing time – requires checking, dust, dirt
ADVANTAGES: cheap and easily transportable
equipments,
AVERAGE
Negative issues:: dust.
ADVANTAGES: controlled mixing time, controlled
water dosage,
Almost inexistent dust; machine
SERVICES ADEPLAST® MOBILE SILO
600
%
1. Services of silo transportation to the site, supplying and re-supplying.
PRODUCTIVITY
MECHANIZATION LEVEL:
ADVANCED
ADVANTAGES:
- 5 to 7 times increased productivity
- loss and material theft elimination
- constant quality of prepared material
- ecological storage (eliminates plastic and paper packaging)
- increased cleanness at the work place
2. Technical assistance including specialized technical support,
on-site technical support, work performance follow up, SILOSERVICE team.
3. Theory and practical training for the operating teams
4. We provide the entire range of accessories, devices, spare parts
and equipments for the ADEPLAST® MOBILE SILO application.
Intervention utility vehicle
42
Three-phase generator
43. Plastering mortars
CEMENT DROP MARK 50
Scope of use:
Specific consumption:
MTI-25
Intended for concrete wall, ceramic block or highly
absorbent wall priming, as a first plastering layer, in
order to even absorption and improve adherence of the
following plastering layers.
approx. 3 - 5 kg/m².
Scope of use:
Intended as plasters and simultaneous finishing, for
indoor purposes, under classic manual method or
with plastering machines, for high humidity rooms
(bathrooms, kitchens, etc) as well as for small repairs of
existing plaster layers
10 - 13 kg/m² for each thickness cm.
Intended for outdoor plastering and simultaneous
finishing by classic manual methods or by means of
plastering machines, in humidity rooms, as well as for
small repairs of existing plastering layers.
mti-25
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
approx. 3 - 15 kg/m² for each thickness cm.
Product code:
Packaging:
Pallet Stand:
Product Standard:
mte-35
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
Product code:
Packaging:
Pallet Stand:
Product Standard:
mtig-20
bag of 30 kg
40 bag/pallet 1200 kg
SR EN 13279-1:2008
Product code:
Packaging:
Pallet Stand:
Product Standard:
seismo
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
GYPSUM-LIME POLISHING PLASTER COAT MORTAR
Scope of use:
To be used as indoor plasters and simultaneous polishing plaster coating, in dry places.
Specific consumption:
SEISMO
Product code:
Packaging:
Pallet Stand:
Product Standard:
OUTDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS
Scope of use:
Specific consumption:
MTIG-20
amc50
bag of 30 kg
42 bag/pallet 1260 kg
SR EN 998-1:2011
INDOOR CEMENT-LIME MORTAR FOR PLASTERING AND REPAIRS
Specific consumption:
MTE-35
Product code:
Packaging:
Pallet Stand:
Product Standard:
Plastering mortars
AMC-50
approx. 8 - 10 kg/m² for each applied thickness cm.
INDOOR-OUTDOOR PLASTERING AND REPAIR MORTAR
Scope of use:
Intended as highly resistant plastering mortar, for
consolidation works – structural rehabilitation and
outdoor and indoor plastering by means of the classic
manual method or by special application machines, as
supplied by our company.
Specific consumption:
approx. 15 - 17 kg / m² for each applied thickness cm.
43