2. Insulating Coatings Corporation
Our history and mission:
In the late 70's, the Ziebarth f ily urned our development and
manufacturing eXf)ertise toward a promising new technology inspired
by t e successful use of ceramic materials in the NASA space program
to reflect intense heat during re-entries. Our new company was named,
"Insulating Coatings Corporation". Under our "Quality Policy", we have
dedicated ourselves to the production of high quality, environmentally
friendly, fluid-applied membranes and systems that solve problems,
improve appearance, and save energy, while adding to the weathertight
sustainability of restored surfaces.
The success of that mission continues to surpass our most optimistic
hopes and projections.
Our products:
Today, ICC develops and manufactures fluid-applied membrane systems
for the sustainable restoration of roofs, walls, and other industrial surfaces.
ASTEC® elastomeric products and systems not only provide seamless
waterproof and weathertight barriers, they offer high reflectivity,
emissivity, and dissipation of heat, while reducing UV light degradation.
ASTEC coatings and membranes add advantages to any substrate that
can lead to substantial maintenance and energy cost reductions.
All ASTEC systems qualify for Energy Star and Cool Roof programs.
In addition, many ASTEC monolithic ceramic wall and roofing systems test
well beyond typical standards for durability, pliability, longevity, wind
resistance, abrasion resistance, and salt, chemical, and corrosives resistance,
while reducing thermal shock damage and the high cost of heat control.
Insulating Coatings Corporation is registered to ISO 9001:2000.
Our Authorized Contractors:
WATERPROOF The maximum benefits of any product are achieved through proper
SEALER #
installation, use, and maintenance. ICC's superior warranties are assured
by the thorough screening, selection, and training of our Authorized
@- Contractors. They are responsible for initial site reviews, contract estimates,
Re-Ply" System installation, and follow-on inspections. As such, their skills must extend
BASE SEALER beyond the professional application of our highly specific systems to
#2000 creative assessments of restoration costs and benefits, to coordination
with architects or other contractors, and to well-organized schedules
of procedure. ICC Authorized Contractors must demonstrate the integrity,
trust, and reliability that ICC customers expect from the top down.
And, because ICC Authorized Contractors are selected by region, they
can help with climate assessment, zoning, energy assistance programs,
or other unique local circumstances that apply to your particular needs.
Our Warranties:
Quality products and systems, applied by authorized contractors, lead
to the best warranties possible. Whatever the project - roof, sidewalls, or
special structure application - ICC will protect each investment with the
appropriate ASTEC® product or ASTEC® Re_PlyTM System guarantee. It will
be the best guarantee available in the industry for that project.
For example, the 1O-Year Renewable Labor and Materials Warranty for any
ASTEC Re-Ply roof restoration is renewable only because the quality and
sustainability of Re-Ply Systems are so high. Experience has demonstrated
that ASTEC Re-Ply roofing systems, properly applied, can be renewed every ten
years, and the guarantee can be safely "renewed" for each sucessive decade.
More money is saved by never shutting down the facility or replacing the
original substrate, and by low maintenance, energy-efficient service for the
life of the building. With a watertight Renewable Warranty, every ASTEC Re-Ply
System roof restoration can become the last roof that facility will ever need!
ICC is the world leader in ceramic seamless surface technology.
3. Affiliations
ASTEC® Re-PlfM Roofing Syst.ems Specialty Coatings
Manufactured by INSULATIN"G COATINGS CORPORATION
----- www.ic - eE.eo
ICC is recognized as a world leader in fluid-applied ceramic cool roofing technology,
as represented by the following affiliations and credentials:
~
Charter Member of the COOL ROOF RATING COUNCIL
~cl
The Cool Roof Rating Council was created in 1998 to develop accurate and credible methods for
evaluating and labeling the solar refiectance and thermal emittance (radiative properties) of roofing
products.
The CRRC is incorporated as a non-profit educational organization for the following purposes:
RATING COUNCIL
- To implement and communicate fair, accurate, and credible radiative energy performance rating
systems for roof surfaces.
- To support research into energy related radiative properties of roofing surfaces, including durability
of those properties.
- To provide education and objective support to parties interested in understanding and comparing
various roofing options.
www.coolroofs.org
t5]CII Member of the NATIONAL ROOFING CONTRACTORS ASSN.
Statement of purpose:
U[J]D The National Roofing Contractors Association was formed in 1886 to preserve and promote the
art of roofing application. NRCA members recognize that after 100 years of innovation in roofing
technology and application, the following goals are as meaningfUl and relevant today as they were
yesterday and as they will be tomorrow.
www.nrca.net
Member of the ROOF CONSULTANTS INSTITUTE
Mission statement:
- To represent the interests and values of the roof conSUlting professional
- To provide for the professional development of our members
- To convey the consultant's perspective to the roofing industry and the public
- To support professionalism, ethical behavior, education and research in the roofing industry
www.rci-online.org
An ENERGY STAR Partner
ENERGY STAR is a dynamic government/industry partnership that offers businesses and consumers
energy-efficient solutions, making it easy to save money while protecting the environment for future
generations.
As a leader in ceramic coal roofing technology and insulating coatings, ICC is an enthusiastic
ENERGY STAR partner in environmental conservation and protection from raw material purchasing, through
manufacturing, to installed systems.
www.energystargov
FACTORY MUTUAL SYSTEM Approved
FM Approvals is a leader in certification and Approval of roofing products and roof assemblies.
Our product Approval is based on performance testing of completed assemblies when subjected
to multiple perils. A typical Approvals program includes fire testing for above and below the deck,
Approvals wind-uplift testing, hail-damageability testing, accelerated weathering and corrosion resistance of
ferrous metal parts.
Quality System Registration
ICC ASTEC® Re-Ply'" Roofing Systems are FMR approved under FM 4470, "Approval Standard
for Class I Roof Covers" (which) provides a basis for the evaluation of membrane-type roof systems.
www.fmglobal.com
lH:4Lt, THE SOCIETY FOR PROTECTIVE COATINGS Member
55PC is the only non-profit association that is focused on the protection and preservation of
concrete, steel and other industrial and marine structures and surfaces through the use of high-
performance industrial coatings. As the voice of SSPC, the JPCL [journal] covers a wide range of
coatings-related topics.
www.sspc.org.
THE FSCT Member
The Mission of the FSCT [Federation of Societies for Coatings Technology) is to provide technical
education and professional development to its members and to the global industry through its
multi-national Constituent Societies and collectively as a Federation.
www.coatingstech.org.
Compliance Approved by MIAMI-DADE BUILDING CODE
."ID Product Control Approval Process:
Our primary customers are manufacturers who submit technical documentation, including but not
limited to test reports, engineering analysis, and installation procedures. Our staff reviews the
information and determines whether the submittal is sufficient to demonstrate compliance with the
Building Code. If so, approval is recommended to the Board of Rules and Appeals (BORA), whose
membership represents a cross-section of our industry.
(The stringent test and review procedures required by Dade County are benchmarks for much
building code enforcement nationwide.)
www.miamidade.gov/buildingcode/
Registered by NSF-ISR
Provider of ISO 9000, ISO 14000, 05-9000 Management Systems Registration, and
related training and pUblications.
Title: NSF-ISR
NSF International, The Public Health and Safety Company(tmJ, a not-for-profit, non-governmental
QUALITY SYSTEM
organization, is the world leader in standards development, product certification, education, and
REGISTERED TO
ISO 9001 :2000
riSk-management for pUblic health and safety. For more than 59 years, NSF has been committed
to pUblic health, safety, and protection of the environment. While focusing on food, water, indoor
air, and the environment, NSF develops national standards, provides learning opportunities
through its Center for Public Health Education, and provides third-party conformity assessment
services while representing the interests of all stakeholders. The primary stakeholder groups
include industry, the regUlatory community, and the public at large.
www.nsf.org
ISO International Organization for Standardization
ISO. The source of ISO 9000, ISO 14000 and more than 14,000 International Standards
for business, government and society.
ISO. A network of national standards institutes from 148 countries working in partnership
with international organizations, governments, industry, business and consumer representatives.
A bridge between pUblic and private sectors.
www.iso.ch
4. Project Credentials
This is a partial list of organizations which have chosen ASTEC Coating and
ASTEC Re-Ply Systems to restore and improve their facilities:
Amtrak Homer Hospital Pilots Point Marina
Amway Hormel Foods Piper Aircraft
Anaheim Convention Center Honda Pippin Motor Homes
Anniston Ammunition Depot IBM Port of Vancouver
Apache Steel Ingersoll Rand PPG
Archer Daniels Midland Ivax Pharmaceuticals Protecto Wrap
Atlas Energy Jet Plastica Proctor & Gamble
Augusta State University Johnson Controls Queen of Peace Church
Baldwin County Schools Keebler Corporation Rainier Cold Storage
Blue Bird Wanderlodge Kentucky Fried Chicken Regency Towers
Boeing Kimberly Clark Richmond Technology
Bridgeport University Lemoore Naval Station Ricoh
Calhoun Hospital Litton Industries Rodel
Central Cold Storage Lockheed Martin Rye Racquet Club
Chris Craft Boats Mayfair Racquet Club Sara Lee
Collis Marmon-Keystone Sawgrass Mills
Columbus Air Force Base Manatee Bowling Lanes Scientific Glass
Commodore Condominium Manheim Auto Auction Group Southeast Lighting
Conoco Oil McCoy's Lumber Southern Store Fixtures
Dallas Planning Mills McDonald's Corporation Standard Register
Dairy Queen Corporation Miami-Dade Aviation Authority Sun Chemical
Delphi Minute Maid Super 8 Motels
Denver Civil Service Moeller High School Swanson Corporation
Dever Distributing MTX Corporation Tennessee DOT
Elecro NASA Johnson Space Center Toledo Scale
Entergy Riverbend Naval Air Museum Toro
Nuclear Facility Nellis Air Force Base Trane Company
Firestone Business Park Neo Plan Bus Manufacturing Uni-Kool
Florida Power & Light New Orleans Convention Center University of Kentucky
FP&L Progress Energy NJ Housing Authority US Coast Guard
Nuclear Training Center
Noland Company US DOE Pantex Facility
Fort Gordon Army Depot
Norfolk Shipyards Vincent Metals
Fridgidaire Corporation
NYS Thruway Authority Wabash Alloys
Friskies Petcare
Ocean Spray Warren Performance
Gem of Hawaii
Ocean Sunrise Condominium Walt Disney Phase I & II
Gold Kist Foods
Oman Royal Guard Wayne Dalton
Grainger
Oreck WES-PAC
Grissom Air Force Base
Pacific Electric & Gas Western Village Shopping Center
Grumman-Olson
Packard Hughes Weyhauser
Gulf Chemical
Pennsylvania Tool Wheeling-Pitt Steel
Harbourage Marina
Pensacola Naval Air Station Winnemucca Farms
Hilton Hotels
Pepsi Cola Yakima Fruit & Cold
6. Re_PlyTM System for Metal Roofs
Donlt pay to replace i
if you can R -Pl9~ it!
Seamless, fluid-applied layers
add durable, cool-roof advantages that restore
leaky metal surfaces to better-than-new performance.
ASTEC Re-Ply System
1O-Year Renewable
Prepare Surface:
Remove scaling rust. and pressure wash
0 Apply Core layer:
Flow on the first layer of ASTEC #900
Warranty guarantees a to achieve a clean, sound surface. Tighten Ceramic Finish for Metal. It provides a tough,
durable, waterproof roof or replace loose fasteners. weathertight. monolithic core layer. bonded over
every square inch of the roof surface.
for ten years. You may
Encapsulate Corrosion: ~
then have ASTEC inspect,
clean, restore, and Apply ASTEC 8-16-71 Rust Control.
specially formulated to neutralize and halt
G Apply Final layer:
Flow on a second layer of ASTEC #900 Ceramic
warranty your ASTEC further metal erosion. Finish for Metal. This final application will create
Re-Ply roof for another a seamless. titanium-white surface of highly-
10 years. Seal Seams CSt Fasteners: reflective. ceramic-embedded roofing that remains
By relying on ASTEC every waterproof, pliable, and virtually impervious
Caulk open seams. Reinforce all seams. to airborne corrosives over years of hostile
10 years, this could be flashings, and penetrations with high
tensile strength fabric. Saturate with environmental conditions.
the last roof you will
ever need! ASTEC WPM#9 Waterproof Sealer. Procedures will vary by roof
type and condition.
Seal Roof:
Flow on ASTEC WPM#9 Waterproof Sealer
over all areas of caulking. reinforcing fabric, and
Click for APPLICATION SPECS I
fasteners to create a watertight base for the final CONTACT US
seamless layers. for roof Survey/Proposal
<;~ ~ ~
Re.PIy-System Re·Ply"System Re.PIy"System
(!J~ii' ~ 0 I!. WA'nRPROOF ~rn~llcg UlllJj(!Jll~[){]
~ tl®~71tl SEALER #9 #@@@
.-_~.,r-.................. II'
I..... 1,
11
ASTEC Rust Control ASTEC Waterproof ASTEC Ceramic Finish
B 16-71 is specially Sealer WPM #9 is a fluid #900 provides the ASTEC
formulated to neutralize and applied membrane which Re-Ply System with its
halt further rust corrosion encases all seams, fasteners, durability as well as all its
on all rusted metal surfaces. joints, flashings, intrusions, cool-roof advantages. It is
It prepares and sets the and substrate repairs inside deliberately applied in
su rface to bond with ASTEC a tough, pliable, seamless multiple layers to assure
cool roof sealers and surface surface. The renewed surface a well-bonded seamless
membranes. is now wind and watertight, surface over ASTEC's
and ready to be bonded with watertight base.The
ASTEC ceramic finish layers sustainability of ASTEC
for the ultimate in durable #900 surfaces permits the
~ protection from UV sunlight,
heat, and airborne
corrosives.
ICC watertight Renewable
Warranty to be updated
every 10 years.
Re.Ply"System
[il108!JUl@[Kl<gOJKIJ@
[P@I1W(Ql1@'IT'lXJ
<;~ ~
Re.PIy·System Re.PIy"System
ASTEC Reinforcing Poly BUTYL-BACK OOJKIJ@ITTI'1J@JKlJOOl
Cloth is a high tensile
strength polyester fabric
BBTTAPE #~@@@
used over joints, seams,
and repairs in failing roof
substrates. Once embedded
in ASTEC Re-Ply System ASTEC BBT Butyl-Back ASTEC Surface
roofing membranes, ASTEC Tape is highly adhesive and Conditioner #4000
Reinforcing Poly Cloth hel ps bonds especially well with is a concentrated aqueous
stabilize the restored roof ASTEC Re-Ply finish layers. acrylic emulsion sealer
into a single, seamless Once embedded, ASTEC formulated to "lock down"
surface that is virtually BBT Tape's high tensile chalky or efflorescence
impervious to tears, splits, strength contributes to the residue remaining after
or damage from the stability of all restored areas. pressure washing. It is
elements. only required with certain
aluminum substrates or
special metal finishes.
7. Re_PlyTM System for Single-Ply Roofs
Don't pay to replace i
if you can R _PIg' it!
I!!!!!~!!!!!!~::::;ii~s:e=amless,f1uid-
'III!!!!~:=::: restore leaky rubber (EPDMj, Hypalon,
! advantages that
applied layers add durable, cool-roof
and other single-ply surfaces to better-than-new performance.
ASTEC Re-Ply System Restores & Improves Single-Ply Roofs Prime and Seal Surface:
10-Year Renewable • Creates a seamless, weathertight barrier. Flow on one or two layers of ASTEC Base
Warranty guarantees a • Stays pliable and weathertight in all climates. Sealer #2000 for Rubber. This bonding
durable, waterproof roof sealer applies as a fluid. filling all cracks.
• Withstands ponding water. and curing as a seamless, pliable,
for ten years. You may
• Resists fungi and algae growth. membrane over the entire roof.
then have ASTEC inspect,
clean, restore, and • Reliects away heat and harmful UN radiation.
warranty your ASTEC
Apply Core layer:
• Surpasses R 19 heat gain testing.
Re-Ply roof for another Flow on the first ASTEC Re-Ply #2000
• Saves big temperature control and cooling costs. Finish layer. It will bond with the ASTEC
1a years. • Greatly reduces wind damage risk. Re-Ply Base Sealer #2000 and provide
By relying on ASTEC every a monolithic core base for the final surface.
1a years, this could be • Improves appearance.
the last roof you will • Eliminates roof replacement expenses.
Apply Surface layer:
ever need! • Provides a 1a-Year Renewable Warranty.
Flow on the final ASTEC Re-Ply #2000
Finish layer. The new surface will be a
Prepare Surface: seamless, titanium-white ply of a highly-
reflective roofing that is waterproof, pliable.
Pressure wash the old surface to eliminate and virtually impervious to airborne
loose material. Repair substrate. blisters, corrosives over years of hostile
and cracks as needed. Clean all rubber environmental conditions.
surfaces with EPDM Rinseable Primer.
Procedures will vary by roof
Seal Seams: type and condition.
Reinforce all roof, vent, duct. and flashing
seams and laps with high tensile strength
Click for APPLICATION SPECS I
fabric or BBT butyl-back tape. Saturate
with ASTEC Base Sealer #2000. CONTACT US
for roof Survey/Proposal
<~~ ~ ~ ~
Re-Ply"System Re.PIy'System Re-PIy'System Re.PIy'System
BU'l"YL-BACK EPDM RlNsEABLE BASE SEALER #2000
BBTTAPE PRIMER #2000 FI SH
ASTEC BBT Butyl-Back ASTEC EPDM Rinseable ASTEC Base Sealer ASTEC #2000 Finish
Tape is highly adhesive and Primer is the breakthrough #2000 is used to saturate works with ASTEC Re-Ply
bonds especially well with product that made renewal and waterproof all seam- Base Sealer #2000. The
ASTEC Re-Ply finish layers. of EPDM rubber roofs truly sealing fabrics and tapes at first finish layer bonds with
Once embedded, ASTEC possible. We are now able joints, vents, and rubber roof the base sealer layer and
BBT Tape's high tensile to completely clear away the repairs. Once cured, a melds into the old EPDM
strength contributes to the chalky surface residue on second layer of ASTEC Base roofing material forming a
stability of all restored areas. EPDM roofs caused by Sealer #2000 is applied new, seamless, weathertight
ozone deterioration. The over the entire roof area to roofing surface. Once the
seams and surface are clean create the first monolithic second layer of Re-Ply
and primed for bonding, bonding surface that is both #2000 Finish cures, the new
assuring permanent melding waterproof and wind tight. roof takes on the sustainable
and sealing of all subsequent Base Sealer #2000 is ASTEC advantages that
ASTEC Re-Ply layering. formulated to bond the perm it the ICC watertight
original EPDM rubber to the Renewable Warranty to be
ASTEC Re-Ply Finish layers. updated every 10 years.
8. Re_PlyTM Systems add advantages
Restore leaking metal, asph It, D -lJ t..,
EPDM, and other si 'f}fe-ply substrates
to better--th n-original performance.
," ~~L~
~
$..
Installation Savings
Can save costs of roof replacement
and facility downtime. All-Climate Stability
Re-Ply'" surfaces retain their flexible, watertight
superiority in hot or cold, wet or dry extremes.
A Solar Shield ENERGY STAR
Ceramic and titanium-based surface has
superior resistance to u. II. degradation. Energy Savings
Surpasses reflectivity requirements
for the Energy Star label, while maximizing
quicker heat emissivity and dissipation.
A Wind Breaker
Strong, SEAMLESS, weathertight
roofing surface.
Thermal Protection
Tough, durable, heat and combustion
protection; Class A fire rated.
Maintenance Savings
Reduces thermal shock damage;
remains watertight over many substrates.
A 10-Year
Renewable Warranty
A Corrosion Barrier The durability of our waterproof protection
Virtually impervious to ocean spray, is sustainable and guaranteed -
acid rain, other contaminants. in writing - for labor and materials.
This could be the last roof you will ever need!
12. ASTEC® Coating Systems
for Exterior Walls
In addition to extended life, and monolithic weathertight sealing, ASTEC Exterior Wall membranes
will also add their superb ceramic 'nsulating qualities to virtually any existing wall material.
11111111111111111111
111111111111111 II III
111111 II II III II III II
1111 II 11111 II 1111111
111111111 II II 1111111
111111111111 II 111111
1II11111~1111111 II I
1111II II II 11111II II
111111 II 111111111II
1I1!/1II 11111111111
n
II III 11111 1111
Seals, Restores, & Improves: • Reflects away heat and harmful UN radiation.
• Surpasses R19 heat gain testing.
• Steel or Aluminum Metal Walls • Saves temperature control and cooling costs.
• Wood & Wood Composite Walls • Can be bonded with pre-painted surfaces.
• Creates an easy-care, linen-like satin sheen.
• Cement, Brick, & Stucco • Cures to a seamless, weathertight barrier.
Masonry Walls • Stays pliable and weathertight in all climates
• Pre-painted Walls • Does not shrink, crack, or gap at wall openings.
• Withstands sea mist and airborne corrosives.
• Resists fungi and algae growth
• Greatly reduces risk of thermal shock damage.
Click for APPLICATION SPECS I • Restores and extends the life of original walls.
• Water-based and enviromentally-friendly systems.
CONTACT US • Cures to a highly fire-resistant surface.
for walls Survey/Proposal
• Written Limited 1O-Year Warranty.
ASTEC Exterior Wall Systems use various combinations of the following
products in specific layers, thicknesses, and concentrates depending on the
type and condition of the walls to be renewed:
@ ~ @
II
Exterior Exterior Exterior
WATERPROOF (grn~O(g I?OIi'mJ@[){]
SEALER #9 #@@@
I..... ...... II
ASTEC Surface ASTEC Waterproof ASTEC Ceramic Finish
Conditioner #4000 Sealer WPM #9 is a fluid #900 provides the ASTEC
is a concentrated aqueous applied membrane which System with its durability as
acrylic emulsion sealer encases all seams, fasteners, well as all its UV, heat, and
formulated to "lock down" joints, flashings, intrusions, energy saving advantages.
chalky or efflorescence and substrate repairs inside It is deliberately applied in
residue remaining after a tough, pliable, seamless multiple layers to assure a
pressure washing. ASTEC surface. The renewed surface well-bonded seamless
Surface Conditioner #4000 is now wind and watertight, surface over ASTEC
provides a secure monolithic and ready to be bonded with watertight base sealers.
surface for bonding ASTEC ceramic finish layers ASTEC #900 surfaces can
subsequent ASTEC layers. for the ultimate in durable be tinted in a myriad of
protection from UV sunlight, coordinating colors that are
heat, and airborne water-based, fade-resistant,
corrosives. and easily maintained over
@ the life of the 10 Year
Limited Warranty.
Exterior
@
#5000HB Exterior
TEXTURED
ASTEC #5000 HB
Textured Finish
is a ceramic-filled vinyl
terpolymer elastomeric ASTEC Rust Control
material formulated with B 16-71 is specially
a high build consistency to formulated to neutralize and
finish as a stucco-like surface halt further rust corrosion
with more area for heat on all rusted metal surfaces.
emissivity and dissipation. It prepares and sets the
It retains full elasticity to metal for embedding in
avoid stress cracking. ASTEC subsequent ASTEC surface
#5000 HB is base white coatings.
and available in 12 colors,
or custom-tinted by special
order. Use Iighter pastels to
enhance ASTEC's ceramic
reflectivity advantages.
13. Exterior Wall advantages
Add energy-saving cemmic insulation,
and guaranteed durable 15eauty,
t drab and de eriorating walls.
~~L~
Maintenance Savings
...
-
~
Save the cost of frequent painting,
repairs, and heat-related losses. All-Climate Stability
ASTEC@surfaces retain their weathertight
elasticity in hot or cold, wet or dry extremes.
Thermal Shock Savings
Reduces thermal shock damage; remains ENERGY STAR
watertight over a variety of substrates.
Energy Savings
Surpasses reflectivity requirements
for the Energy Star label, while maximizing
quicker heat emissivity and dissipation.
A Corrosion Barrier I
Virtually impervious to ocean spray,
~.
acid rain, other airborne corrosives.
'0'- .,;
Thermal Protection
Tough, durable, heat and combustion
protection; fire-resistant.
A Solar Shield
Ceramic and titanium-based surface has
superior resistance to U. II. degradation.
A 10-Year
Limited Warranty
A Wind Breaker The durability of ASTEC
Strong, SEAMLESS, weathertight ceramic industrial coatings are
wall surfaces. guaranteed in writing.
Save money and trouble, and look great doing it!
14. Callery
ASTEC® Coating Systems
for Exterior Walls
Click on any snapshot for larger picture and project details
/'
----
..._
." , .
- ~ -'I
Po;
~ ~I
I "1
"
15. ASTEC® Coating Systems
for Industrial ApplicatiQt:1
In addition to extended life, and monolith'c weathertight sealing, ASTEC Industrial membranes
have proven that ceramic insulating surfaces can be beneficial in many unique applications.
Seal, Restore, &- • Reflects away heat and harmful UN radiation.
Reduce Heat Absorption for: • Surpasses R19 heat gain testing.
• Storage Tanks • Reduces the hazards of high heat absorption.
• Can be bonded with pre-painted surfaces.
• Walkways Of Stairways • Creates an easy-care, linen-like satin sheen.
• Decks Of Railings • Cures to a seamless, weathertight barrier.
• Stays pliable and weathertight in all climates.
• Piping Of Ductwork
• Does not shrink or crack in temperature extremes
• Wherever heat control • Withstands sea mist and airborne corrosives.
is helpful • Resists fungi and algae growth.
• Restores and extends the life of original surfaces.
Click for APPLICATION SPECS I • Water-based and enviromentally-friendly systems.
CONTACT US • Cures to a highly fire-resistant surface.
for Evaluation/Proposal
• Written Limited 1O-Year Warranty.
ASTEC Exterior Systems use various combinations of the following
products in specific layers, thicknesses, and concentrates depending on the
type and condition of the walls to be renewed:
~ ~ ~
Exterior Exterior Exterior
WATERPROOF
SEAUR#9
ASTEC Surface ASTEC Waterproof ASTEC Ceramic Finish
Conditioner #4000 Sealer WPM #9 is a fluid #900 provides the ASTEC
is a concentrated aqueous applied membrane which System with its durability as
acrylic emulsion sealer encases all seams, fasteners, well as all its UV, heat, and
formulated to "lock down" joints, flashings, intrusions, energy saving advantages.
chalky or efforescence and substrate repairs inside It is deliberately applied in
residue remaining after a tough, pliable, seamless multiple layers to assure a
pressure washing. ASTEC surface. The renewed surface well-bonded seamless
Surface Conditioner #4000 is now wi nd and watertight, surface over ASTEC
provides a secure monolithic and ready to be bonded with watertight base sealers.
surface for bonding ASTEC ceramic finish layers ASTEC #900 surfaces can
subsequent ASTEC layers. for the ultimate in durable be tinted in a myriad of
protection from UV sunlight, coordinating colors that are
heat, and airborne water-based, fade-resistant,
corrosives. and easily maintained over
~ the life of the 10 Year
Limited Warranty.
Exterior
~
Exterior
ASTEC 100 Ie Finish
is a ceramic-filled vinyl
terpolymer elastomeric
surface material formulated ASTEC Rust Control
with denser ceramics to B 16-71 is specially
better withstand exposure formulated to neutralize and
to extremes of heat, airbome halt further rust corrosion
corrosives, or infrared and on all rusted metal surfaces.
ultraviolet radiation. ASTEC It prepares and sets the
100 /C's superior reflectivity, metal for embedding in
emissivity, and dissipation subsequent ASTEC surface
are most effective in white coatings.
or light pastels. There are
30 standard colors. Custom
colors can be ordered.
16. Industrial applications advantages
Add durable, corrosion-resista t, and
insulating surfaces w efever extremes
GQuse comfort, safety, or cost problems.
~~L~
...
-
~
A Corrosion Barrier
Virtually impervious to ocean spray, All-Climate Stability
acid rain, other airborne corrosives.
ASTEC@surfaces retain their weathertight
elasticity in hot or cold, wet or dry extremes.
A Solar Shield ENERGY STAR
Ceramic and titanium-based surface has
superior resistance to U. V. degradation. Energy Savings
Surpasses reflectivity requirements
for the Energy Star label, while maximizing
quicker heat emissivity and dissipation.
I
Maintenance Savings
Save the cost of frequent painting,
repairs, and heat-related losses.
~. '0'- .,;
Thermal Protection
Tough, durable, heat and combustion
protection; fire-resistant.
Thermal Shock Savings
Reduces thermal shock damage; remains
watertight over a variety of substrates.
A 10-Year
Limited Warranty
A Wind Breaker The durability of ASTEC
Strong, SEAMLESS, weathertight ceramic industrial coatings is
structures and surfaces. guaranteed in writing.
Long-lasting protection never looked so good!
18. Insulating Coatings Corporation
D
Ivory states and International Blue states and Canada
are managed by the are managed by the
Southern Sales Office: Northern Sales Office: ICC Manufacturing:
Insulating Coatings Corporation Insulating Coatings Corporation Insulating Coatings Corporation
604 South Highway 41 103 Main Street 956 South Highway 41
Inverness, FL 34450 Binghamton, NY 13905 Inverness, FL 34450
Telephone: 352.344.8741 Telephone: 607.723.1727 E-mail: manufacturing@icc-astec.com
Toll Free: 800.345.5306 Toll Free: 800.223.8494
Fax: 352.344.8370 Fax: 607.723.1700
E-mail: iccsouth@icc-astec.com E-mail: iccnorth@icc-astec.com