EFB pellet is pelletized by the byproduct of EFB, as a new biomass, it is friendly to the environment. However, EFB contains a large variety of different fuels with different chemical composition and combustion characteristics. If making it into pellet in the case of unpretreament, which may lead to slagging, fouling and corrosion when combustion.

1. Azeus Machinery Co. Ltd
Email: info@biopelletmachine.com
Website link: www.biopelletmachine.com
Keywords:
EFB pellet Malaysia, pellet mill Malaysia, pellet machine Malaysia,
palm fiber, palm pellet, cost of wood pellet, EFB pellet combustion
EFB Pellet Combustion
EFB pellet is pelletized by the byproduct of EFB, as a new biomass, it is
friendly to the environment. However, EFB contains a large variety of different
fuels with different chemical composition and combustion characteristics. If
making it into pellet in the case of unpretreament, which may lead to slagging,
fouling and corrosion when combustion.

2. Problems Occurred During the Combustion of EFB pellet
The Main Chemical Composition in EFB Pellet
Chlorine is a special minimal nutrition elements, and it widely exists in nature.
In the seven kinds of necessary trace elements, plants contain the highest
chlorine content. Such as rice straw, EFB etc. EFB still contains large quantity
of alkali metals, such as, K, Na, Ca, Mg, etc, and it still contains inorganic
element, such as N, etc. It can generate KCl, NaCl, NOx, HCl, etc easily under
high temperature(>450°C). These ingredients will generate slagging and
corrosion.
Slagging and Low Ash Fusion Temperature Problems
Firstly, during the EFB pellet combustion process, its raw material composition,
the parameters(furnace temperature, contact to the air, heating surface
temperature ) and fuel shape has a certain impact on the deposition. High

3. chlorine content in the raw materials can promote the liquidity of alkali, and
easily to form alkali metal chlorine, then deposit on heating surface; if the
furnace temperature rises, it is contributed to the escape of alkali metal from
fuel. The alkali metals condensate on the fly ash, and reduced its melting point,
which are more likely to cause slagging problems.
Corrosion Problem
Moreover, caused by alkali corrosion mechanism, the furnace temperature,
chlorine content and deposit volume are the important factors affecting
corrosion. In the process of corrosion caused by solid alkali metal oxide,
furnace temperature and the deposit volume’s increasing will obviously
increase the oxidation rate of boiler steel. And the rise of temperature will
accelerate the response to the corrosion; and the increasing of chlorine
content in EFB pellet will also cause corrosion.
Solution of Problems Which Occur at Combustion of EFB Pellet
1. Use multi-fuel boiler which is suitable for burning EFB pellets.
2. Using washed method to remove part of alkali metal before pelletization.
Most of the alkali metal elements in EFB are water-soluble, so washed method
can be used as an effective method to eliminate alkali metal problem. After
washing, the ash has different degrees of decline, and ash melting has been
improved, and reduced the corrosion problem caused by alkali metal.
3. Using additives when pelletizing. Such as, kaolin clay, activated alumina,
dolomite, silica and diatomite. It can solve the problem of chloride content and
corrosion effectively.
4. Co-firing with fossil fuel will solve the problem of low ash fusion temperature
and reduce the chloride content.
5. Lower combustion temperature is also the effective way to solve the
problem of low ash fusion in the EFB pellet burning.