1. Professional Headend Solutions
IP Media Solutions
DIX 200 IP-REMULTIPLEXER/STREAMER
The DIX 200 IP Remultiplexer & exist in the PID filtering and PID The DIX 200 setup and programming
Streamer represents the latest Remapping. Statistical PCR correc- has to be done by a software tool
generation of transport stream tion results in a full error correction connected over a network to the
remultiplexers and is capable of on all services. The IP Remultiplexer Ethernet control port. For the
simultaneously processing the data & Streamer is equipped with an monitoring of the device within an
streams of more than 1000 radio and integrated TS analyzer and complete Network Management System (NMS)
television programs coming from diagnostic module. an SNMP agent is applicable.
256 sources. Four independent MPEG
TS are multiplexed and provided IP Beyond the remultiplexer functions,
encapsulated at the GbE - output. the DIX 200 IP Remultiplexer &
External sources like Scrambling- Streamer can be used without any
and EPG-Data can be inserted. additional unit as streamer in IPTV
The data rate of the GbE Input can be systems and as gateway in tele-
utilized in 100 %, and no limitations communication networks.
IP Media Solutions
FEATURES
256 IP inputs with multicast and unicast connections
100Base-T and 1000Base-T operation mode
Four independent TS Remultiplexers with gigabit IP output
Each Remultiplexer part supports 12 PSI Inserters
DIX 200
More than 2 Gbit integrated storage capacity IP-Remultiplexer/Streamer
PCR corrector for each PID value
Automatic and manual Service Identifier and PID handling (PID Remapping)
IPTV Streamer mode with logically and physically separated IP output
Ideally suited for EDGE-QAM family EQM 10x
SNMP remote control facility
Low power consumption (typically 35 W), high reliability, long life time

2. Professional Headend Solutions
Technical Data
DIX 200 IP-REMULTIPLEXER/STREAMER
IP Input, IP Output
IP input and output 1000Base-T / 100Base-T
DRD 694
(auto negotiation) DVB-S2 Receiver
Operational mode full duplex
Protocol IPv4 (prepared for IPv6)
Number of inputs 256 unicast/multicast connections
IP output physically and logically
independent from the IP input
Number of connectors 2 × RJ-45
Input data rate 1000 Mbit/s
(theoretic max. of 1000Base-T)
Output data rate max. 4 × 100 Mbit/s
Transmission Characteristics DIX 200
Central IP-Remux
Number of TS Remultiplexers 4 (independently programmable IP-Remuxing
units)
Number of PID Filter
/Remappers 4 × 256 × 8192
Number of output inserters 4 × 12 Output Inserters
Programming/supervision by free external software
IP-Network
General Data
DIX 200
www.blankom-digital.de
Front panel LED displays 2 × LINK, ACT, GIGABIT
4 × STREAM with OVERFLOW
Local
IP-Remuxing IP-Remux
display
Weight approx. 3.5 kg
Size 19” × 1 RU
W × H × D 483 × 43.6 × 473 mm
Power requirement 90 … 264 VAC, 47 … 440 Hz
Power consumption max. 35 VA
Operating temp. range + 5 … + 40 °C
Relative humidity max. 80 %
Storage temperature range - 25 ... + 45 oC EQM 10x
Relative humidity max. 95 %, non-condensing EDGE-QAM
HFC-Network
Rear view DIX 200
© 05/2009 BLANKOM Digital GmbH
Subject to modifications
Associated BLANKOM Products
- DRD 694 8PSK/QPSK TWIN RECEIVER
- DIP 120/121 IP GATEWAYS
- EQM 100/101/102 EDGE QAM MODULATORS
BLANKOM Digital GmbH
TecCenter · 31162 Bad Salzdetfurth/Germany
Phone: +49(0) 50 63/27 11 0 · Fax: +49(0) 50 63/27 11 60
www.blankom-digital.de