Linkit one傳遞bluemix

•Download as PPT, PDF•

0 likes•329 views

czech0923

利用Linkit One的GPS模組及wifi模組傳遞GPS座標給Bluemix

Devices & Hardware

The fourth webinar in the series – From concept to consumer – make your IoT idea a commercial reality – looked into the challenges around power management for IoT devices. As the desire for IoT solutions broadens to include features such as continual sensor readings, real-time data management, and on-board processing, the need to select the right hardware becomes ever more important. In addition is the requirement for effective power management. The webinar looked at the challenges of power management including: •Strategies to increase your battery performance •Alternative techniques to deliver performance without compromising your output •Identifying the trade-offs between use-cases and performance

MediaTek IoT power management webinar

MediaTek Labs

Develop wearable devices the easy way with all the tools and support you could need including HDKs, SDKs and technical documentation. The new LinkIt™ 2523 HDK by SAC is for developers looking to create advanced wearable products. Based on the MediaTek MT2523G chipset the HDK offers dual-mode Bluetooth, comprehensive GNSS standards support and industry leading performance in terms of time-to-first-fix, accuracy and power consumption. The HDK is ideal for developers looking to create more sophisticated wearables such as smartwatches, fitness trackers, health monitors, emergency locators and more. In this 30 minute webinar MediaTek Labs technical consultant Philip Handschin demonstrated how to get started with the LinkIt™ 2523 HDK by SAC, enabling developers to create advanced wearable products.

Developing IoT devices. Creating wearables with the new LinkIt™ 2523 HDK by SAC

MediaTek Labs

Phil Handschin, technical consultant, MediaTek Labs, gives a master class on the MediaTek LinkIt ONE development board at the Russian Geek Picnics in Moscow and St Petersburg in June 2015. The board is powered by the world’s smallest commercial System-on-Chip (SOC) for wearables, the MediaTek MT2502. The LinkIt SDK for Arduino makes it very easy for developers to start creating their own wearable and IoT devices. Phil gave an introduction to the board and the SDK and a walk through of some example code – everything you could need to go away and get started. Find out more about the LinkIt ONE development platform: http://labs.mediatek.com/linkitone Get the tools you need to build your own Wearables and IoT devices, register now: http://labs.mediatek.com/register

Geek Pic-Nic Master Class

MediaTek Labs

An introduction to creating Wearables and IoT proof-of-concepts with the MediaTek LinkIt ONE development platform. The presentation provides an overview of the LinkIt ONE development board, before explaining how to setup the SDK, a plug-in for the Arduino SDK. It then looks at how to code with some of the key features of the LinkIt ONE API: SMS, GPS (GNSS), audio and GPRS. It concludes by offering an overview to the MediaTek Cloud Sandbox, other development platforms available, LinkIt Assist 2502 and LinkIt Connect 7681, and details on key links for registration and more information. Find out more about the LinkIt ONE development platform visit http://labs.mediatek.com/linkitone Get the resources and support you need to build your own Wearables and IoT devices, register now: http://labs.mediatek.com/register

MediaTek Labs Webinar: Getting Started with LinkIt ONE

MediaTek Labs

C Cross Compile for Linkit Smart 7688

Nattapong Rodmuang

The new MediaTek LinkIt™ Development Platform for RTOS is based on ARM Cortex-M4 MCU architecture and provides leading features for the creation of connected appliances, home and office automation devices, smart gadgets, and IoT bridges. Supporting a range of chipsets (initially the MediaTek MT7687F), LinkIt for RTOS offers the convenience of a single toolset and common API implemented over a popular RTOS. With this you can achieve economies across a full range of consumer and business IoT devices. The platform consists of a Software Development Kit (SDK), Hardware Development Kits (HDKs), including modules from supply chain partners, and related technical documentation. The first release of the platform supports the MediaTek MT7687F Wi-Fi SOC which has a 192 MHz MCU, 1×1 802.11b/g/n Wi-Fi subsystem, integrated security engine (AES and 3DES/SHA), embedded SRAM/ROM and 2MB flash. The new platform uses FreeRTOS with open-source modules for TCP/IP, SSL/TLS, HTTP (client and server), SNTP, DHCP daemon, MQTT, XML and JSON. Development and debugging is supported by free command line tools, plus a KEIL plug-in.

Introduction to the new MediaTek LinkIt™ Development Platform for RTOS

MediaTek Labs

160603 T客邦7688物聯網實作坊

CAVEDU Education

In this free 30 minute live webinar, followed by Q&A, you'll learn all about the new MediaTek LinkIt Smart 7688 development platform, the open-source Wi-Fi platform for a more connected world. The MediaTek LinkIt™ Smart 7688 development platform enables rapid development of Wi-Fi enabled products for the smart home and office, such as advanced IP cameras, surveillance devices, and smart appliances. In this webinar you will learn about: • The architecture and capabilities of the MediaTek LinkIt Smart 7688 • How to undertake rapidly develop of Wi-Fi enabled products using Arduino, Python, Node.js or C/C++ Presented by Ajith KP, technical consultant, MediaTek Labs. Checkout LinkIt Smart 7688 at http://labs.mediatek.com/7688

MediaTek Linkit Smart 7688 Webinar

MediaTek Labs

LinkIt Smart 7688 Duo and MCS basics

CAVEDU Education

LinkIt Smart 7688 - a more connected world

CAVEDU Education

Want to add Wi-Fi to your IoT project? This 30 minute webinar, presented by technical consultant Ajith KP, demonstrated how to program (using Arduino and Python) for peripheral sensors connected to the MediaTek LinkIt Smart 7688 Duo’s microcontroller and how to communicate between the microcontroller and the MT7688 SOC. Three ways to undertake the peripheral programming for the MediaTek LinkIt Smart 7688 Duo were covered: 1) Using a primitive UART connection 2) Using the Firmata protocol 3) Using the Arduino Yun Bridge Library A recording of the live event can be found at http://home.labs.mediatek.com/technical-mediatek-linkit-smart-7688-webinar-recording-available/

Peripheral Programming using Arduino and Python on MediaTek LinkIt Smart 7688...

MediaTek Labs

LinkIt Smart 7688程式開發

Wei-Tsung Su

MakerBoard: MT7688 Emulator

Fred Chien

Viewers also liked

161123

CAVEDU Education

LinkIt ONE tutorial #2- Communication and cloud service

CAVEDU Education

LinkIt ONE tutorial #1- Basics

CAVEDU Education

MediaTek Linkit Smart 7688 Webinar

MediaTek Labs

LinkIt Smart 7688 Duo and MCS basics

CAVEDU Education

LinkIt Smart 7688 - a more connected world

CAVEDU Education

Peripheral Programming using Arduino and Python on MediaTek LinkIt Smart 7688...

MediaTek Labs

LinkIt Smart 7688程式開發

Wei-Tsung Su

MakerBoard: MT7688 Emulator

Fred Chien

Viewers also liked (9)

161123

LinkIt ONE tutorial #2- Communication and cloud service

LinkIt ONE tutorial #1- Basics

MediaTek Linkit Smart 7688 Webinar

LinkIt Smart 7688 Duo and MCS basics

LinkIt Smart 7688 - a more connected world

Peripheral Programming using Arduino and Python on MediaTek LinkIt Smart 7688...

LinkIt Smart 7688程式開發

MakerBoard: MT7688 Emulator

Linkit one傳遞bluemix

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (9)