Damper Servomotorları Gruner d 225_en

1. ACTUATOR FOR DAMPERS
Ty p e 2 2 5
Actuator with rotation drive
5 Nm
For the application with
Dampers
Valves
other regulatory functions
Page: Content:
2 Summary actuators, Type 225
3 - 14 Technical characteristics
15 Specific characteristic of continuous control
16 Your way to Gruner
native
ly Alter
GR
UNER – he Fr
T iend
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

2. 2 SUMMARY, TYPE 225
2
● = Standard
-S
P5
S2
S2
P5
05
05
5-
5-
5-
5-
❍ = Optional
5
5
T-
T-
-0
-0
-0
-0
-0
-0
24
24
0T
0T
4T
4T
4T
0T
-0
-0
23
23
02
02
02
23
5C
5C
5-
5-
5-
5-
5-
5-
Type 22
22
22
22
22
22
22
22
Torque 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm
Running time (in seconds) 60...120 60...120 60...120 60...120 60...120 60...120 60...120 60...120
Control Tri-state ● ● ● ● ● ●
On/Off ● ● ● ● ● ●
Continuous control ● ●
(0) 2-10 VDC or
(0) 4-20 mA
Connecting Voltage
24 VAC/DC ● ● ● ● ●
230 VAC ● ● ●
Options
Potentiometer ● ●
Feedback signal (continuous) ● ●
Auxiliary switch ● ● ●
Page 3-4 3-4 3-4 5-6 5-6 5-6 7-8 7-8
S2
5
2
2
5
● = Standard
-P
-S
-S
-P
5-
5
-0
05
05
05
05
05
05
-0
❍ = Optional
4T
4T
T-
T-
T-
T-
T-
T-
02
30
30
24
24
24
30
02
S-
-2
-2
-0
-0
-0
-2
S-
5C
5S
5S
5S
5S
5S
5S
5C
Type
22
22
22
22
22
22
22
22
Torque 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm 5Nm
Running time (in seconds) 20...35 20...35 20...35 20...35 20...35 20...35 20...35 20...35
Control Tri-state ● ● ● ● ● ●
On/Off ● ● ● ● ● ●
Continuous control ● ●
(0) 2-10 VDC or
(0) 4-20 mA
Connecting Voltage
24 VAC/DC ● ● ● ● ●
230 VAC ● ● ●
Options
Potentiometer ● ●
Feedback signal (continuous) ● ●
Auxiliary switch ● ● ●
Page 9 - 10 9 - 10 9 - 10 11 - 12 11 - 12 11 - 12 13 - 14 13 - 14
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

3. 225-230T-05, 225-230T-05-P5, 225-230T-05-S2 3
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control On/Off + Tri-state
Connecting voltage 80...265 VAC (50/60 Hz) / DC
Power consumption 1.5 W / 2.0 VA
Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Running time 60...120 s @ 90°
Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A
Potentiometer 4.7 kΩ (0.2W)
Connection terminal for cable 0,5...1,5 mm2
Safety class II
Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight ca. 500 g
225-230T-05 225-230T-05-P5 225-230T-05-S2
Connection scheme Connection scheme Connection scheme
1 2 3 1 2 3 1 2 3 1 2 3
On / Off
N N N N
L L 1 2 3 L L
1 2 3 1 2 3 S1 S2
Tri-State Potentiometer
1 2 3 1 2 3
N N
L Auxiliary switches
L
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

4. 4 225-230T-05, 225-230T-05-P5, 225-230T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0 (0°) and 1 (90°). For smaller rotation angles, loosen the screws at the
metal end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Direction of rotation switch (On/Off) (fig. 3)
Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 2+3 Supply 2 Supply
R / CW 2 Supply 2+3 Supply
3 Direction of rotation switch (Tri-state) (fig. 3)
L / CCW R / CW
Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW R / CW L / CCW 3 Supply 2 Supply
R / CW 2 Supply 3 Supply
Technical drawing
225-230T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

5. 225-024T-05, 225-024T-05-P5, 225-024T-05-S2 5
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control On/Off + Tri-state
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 1.0 W / 2.0 VA
Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Running time 60...120 s @ 90°
Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A
Potentiometer 4.7 kΩ (0.2 W)
Connection terminal for cable 0,5...1,5 mm2
Safety class III
Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight ca. 500 g
225-024T-05 225-024T-05-P5 225-024T-05-S2
Connection scheme Connection scheme Connection scheme
1 2 3 1 2 3 1 2 3 1 2 3
On / Off
1 2 3
1 2 3 1 2 3 S1 S2
Tri-State Potentiometer
1 2 3 1 2 3
Auxiliary switches
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

6. 6 225-024T-05, 225-024T-05-P5, 225-024T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0 (0°) and 1 (90°). For smaller rotation angles, loosen the screws at the
metal end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Direction of rotation switch (On/Off) (fig. 3)
Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 2+3 Supply 2 Supply
R / CW 2 Supply 2+3 Supply
3 Direction of rotation switch (Tri-state) (fig. 3)
L / CCW R / CW Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 3 Supply 2 Supply
L / CCW R / CW
R / CW 2 Supply 3 Supply
Technical drawing
225-024T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

7. 225C-024T-05, 225C-024T-05-S2 7
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control Continuous control
Control signal Y 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 1.5 W / 2.5 VA
225C-024T-05 Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Connection scheme Running time 60...120 s @ 90°
(Continuous control) Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A, change-over switch
1 2 3 4 Connection terminal for cable 0,5...1,5 mm2
Safety class III
Y U Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
225C-024T-05-S2 Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Connection scheme Weight ca. 500 g
(Continuous control)
1 2 3 4
Y U
S1 S2
1 2 3 1 2 3
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

8. 8 225C-024T-05, 225C-024T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0° and 90°. For smaller rotation angles, loosen the screws at the metal
end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Adjustment of the functional switches (fig. 3)
OFF ON
Direction of rotation
clockwise (0...90°) 3 -
counter clockwise (90...0°) - 3
Control signal Y
3 ON
2...10 VDC (Standard) 1, 2 -
0...10 VDC 2 1
OFF
1 2 3 4 4...20 mA 1 2
0...20 mA - 1, 2
Teach-in of range of angle
Active - 4
Inactive 4 -
All switches are set to OFF by factory default. See page 15 for further instructions concerning teach-in.
Technical drawing
225C-024T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

9. 225S-230T-05, 225S-230T-05-P5, 225S-230T-05-S2 9
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control On/Off + Tri-state
Connecting voltage 80...265 VAC (50/60 Hz) / DC
Power consumption 2.0 W / 3.5 VA
Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Running time 20...35 s @ 90°
Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A
Potentiometer 4.7 kΩ (0.2 W)
Connection terminal for cable 0,5...1,5 mm2
Safety class II
Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight ca. 500 g
225S-230T-05 225S-230T-05-P5 225S-230T-05-S2
Connection scheme Connection scheme Connection scheme
1 2 3 1 2 3 1 2 3 1 2 3
On / Off
N N N N
L L 1 2 3 L L
1 2 3 1 2 3 S1 S2
Tri-State Potentiometer
1 2 3 1 2 3
N N
L Auxiliary switches
L
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

10. 10 225S-230T-05, 225S-230T-05-P5, 225S-230T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0 (0°) and 1 (90°). For smaller rotation angles, loosen the screws at the
metal end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Direction of rotation switch (On/Off) (fig. 3)
Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 2+3 Supply 2 Supply
R / CW 2 Supply 2+3 Supply
3 Direction of rotation switch (Tri-state) (fig. 3)
L / CCW R / CW Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 3 Supply 2 Supply
L / CCW R / CW
R / CW 2 Supply 3 Supply
Technical drawing
225S-230T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

11. 225S-024T-05, 225S-024T-05-P5, 225S-024T-05-S2 11
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control On/Off + Tri-state
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 2.0 W / 3.0 VA
Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Running time 20...35 s @ 90°
Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A
Potentiometer 4.7 kΩ (0.2 W)
Connection terminal for cable 0,5...1,5 mm2
Safety class III
Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Weight ca. 500 g
225S-024T-05 225S-024T-05-P5 225S-024T-05-S2
Connection scheme Connection scheme Connection scheme
1 2 3 1 2 3 1 2 3 1 2 3
On / Off
1 2 3
1 2 3 1 2 3 S1 S2
Tri-State Potentiometer
1 2 3 1 2 3
Auxiliary switches
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

12. 12 225S-024T-05, 225S-024T-05-P5, 225S-024T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0 (0°) and 1 (90°). For smaller rotation angles, loosen the screws at the
metal end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Direction of rotation switch (On/Off) (fig. 3)
Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 2+3 Supply 2 Supply
R / CW 2 Supply 2+3 Supply
3 Direction of rotation switch (Tri-state) (fig. 3)
L / CCW R / CW Direction of rotation Clockwise (0...90°) Counter clockwise (90...0°)
Switch position
L / CCW 3 Supply 2 Supply
L / CCW R / CW
R / CW 2 Supply 3 Supply
Technical drawing
225S-024T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

13. 225CS-024T-05, 225CS-024T-05-S2 13
Applications
To regulate dampers, valves or other regulatory
functions:
• sturdy drive • position indication
• maintenance-free • angle of rotation changeable from outside
• nominal torque 4 Nm • auxiliary switch adjustable from outside
• start-up torque 6 Nm • electromagnetic compatibility tested
Technical characteristics
Control Continuous control
Control signal Y 0...10 VDC or
2...10 VDC (Standard) or
0...20 mA or
4...20 mA
Feedback signal U 0...10 VDC or
2...10 VDC (Standard)
Connecting voltage 24 VAC (50/60 Hz) / DC ±20%
Power consumption 2,5 W / 4,0 VA
225CS-024T-05 Angle of rotation max. 95° (changeable from outside)
Direction of rotation changeable from inside
Connection scheme Running time 20...35 s @ 90°
(Continuous control) Torque 5 Nm
Auxiliary switch max. 2, adjustable from outside
Switching power auxiliary switch 250 VAC / 5 (2.5) A, change-over switch
1 2 3 4 Connection terminal for cable 0,5...1,5 mm2
Safety class III
Y U Protection IP42
Dimensions 145 x 65 x 61 mm
Ambient temperature -30...+50°C
225CS-024T-05-S2 Maintenance maintenance-free
CE 73/23/EWG, 89/336/EWG
Connection scheme Weight ca. 500 g
(Continuous control)
1 2 3 4
Y U
S1 S2
1 2 3 1 2 3
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

14. 14 225CS-024T-05, 225CS-024T-05-S2
1 Adjustment of the angle of rotation (fig. 1)
Both end stops are adjusted to 0 (0°) and 1 (90°). For smaller rotation angles, loosen the screws at the
metal end stop, adjust the end stops as requested, and fasten the screws again.
Fixing of the shaft (fig. 1)
by the locking clamp to the damper shaft: ❑ 8...12 mm
∅ 8...16 mm
Adjustment of the auxiliary switch (fig. 2)
2
The scale at the adjusting knob corresponds to a percentage graduation, related to 0° - 90°.
1) End stop is set to “0“: Switch off the motor and choose the requested switching position by turning
the knob to the right, i.e. “2“ = 20%.
2) End stop is set to “1“: Switch off the motor and choose the requested switching position by turning
the knob to the left, i.e. “8“ = 20%.
Adjustment of the functional switches (fig. 3)
OFF ON
Direction of rotation
clockwise (0...90°) 3 -
counter clockwise (90...0°) - 3
Control signal Y
3 2...10 VDC (Standard) 1, 2 -
ON
0...10 VDC 2 1
OFF 4...20 mA 1 2
1 2 3 4
0...20 mA - 1, 2
Teach-in of range of angle
Active - 4
Inactive 4 -
All switches are set to OFF by factory default. See page 15 for further teach-in instructions.
Technical drawing
225CS-024T-05
all dimensions in mm
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

15. SPECIFIC CHARACTERISTICS OF CONTINUOUS CONTROL 15
Wiring configuration and recommended cable length
max. cable length
max. cable length
transformer
transformer
current of set valve selector
actuator current
cable cross section max. cable length
cable resistance
cable length
*
cable cross section For several actuators switched in parallel the
max. cable length must be divided by the number
of actuators.
* Cable cross section for terminal up to 1,5 mm 2
Teach-in of range of angle > 30°
ON
OFF 1. Actuator stand by
1 2 3 4 2. Adjusting mechanical endstops
3. Switch ON DIP 4
4. Actuator starts teach-in process of range of angle (60...120 s)
5. Turn OFF DIP 4
6. Y now corresponds to the teached-in angle
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved

16. YOUR WAY TO GRUNER
Stuttgart A8 München
Balingen
Karlsruhe Schömberg
Wehingen
A81
Freudenstadt B27
Gosheim
Denkingen Tuttlingen
Frittlingen
Strasbourg
Rottweil Spaichingen
B14 Aldingen
Schramberg
Offenburg 34
B27
A5 B33
Freiburg
Donaueschingen
B31 Singen
Zürich
Basel
N1
N3
GRUNER AG Tel. (++49) 74 26 / 948 - 0 http://www.gruner.de
PF 1149, D-78560 Wehingen Fax (++49) 74 26 / 948 - 200 E-Mail: info@gruner.de
40/07 · 225EN · Copyright by Gruner AG ·Technical changes are reserved