SlideShare una empresa de Scribd logo
1 de 6
Descargar para leer sin conexión
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
34
MECHANICAL BEHAVIOR OF NBR-PVC MIXTURE AFTER IMMERSION
IN DIFFERENT MEDIA
Mohammed H. Al-Maamori1
, Ali I. Al-Mosawi2
, Haider A. Yasser3
1, 3
College of Engineering Materials, Babylon University, IRAQ
2
Free Consultation, Babylon, Hilla, IRAQ
ABSTRACT
Polymer blends are capable of providing materials with extended useful properties beyond
the range that can be obtained from single polymer equivalents. Effect of immersion in oil and water
on hardness of Acrylonitrile butadiene rubber (NBR) Blends reinforced by (30, 50 and 70%) PVC
were studied in this paper. The results from this work show that the strength will impairment after
immersion in oil and water as a result of the penetration of the oil and water molecules within NBR-
PVC blend, which increase the extending between the main chains and cause the weakening in
secondary forces of (vander walls) and crosslink so that the Brownian motion of molecular chains
will increases Which leads to a decrease in hardness.
Keywords: NBR-PVC Blend, Immersion Media, Hardness.
1. INTRODUCTION
Blending, grafting and copolymerization are commonly used to increase the ductility and
toughness of brittle polymers or to increase the stiffness of rubbery polymers. A blend is a mixture of
two or more polymers. A graft is where long side chains of a second polymer are chemically
attached to the base polymer A copolymer is where chemical combination exists in the main chain
between two polymers [A] j and [B],,. A copolymer can be a block copolymer [AAA...] [BB] or a
random copolymer ABAABAB, the latter having no long sequences of A or B units (see Fig.1) [1].
Blending of NBR with other polymers is carried out to achieve any of the following
advantages: enhanced ozone resistance, low temperature flexibility and ageing resistance, increased
abrasion resistance and better swelling behavior [2].
INTERNATIONAL JOURNAL OF ADVANCED RESEARCH
IN ENGINEERING AND TECHNOLOGY (IJARET)
ISSN 0976 - 6480 (Print)
ISSN 0976 - 6499 (Online)
Volume 5, Issue 6, June (2014), pp. 34-39
© IAEME: http://www.iaeme.com/IJARET.asp
Journal Impact Factor (2014): 7.8273 (Calculated by GISI)
www.jifactor.com
IJARET
© I A E M E
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp.
Many articles were devoted to studying the effect of different reasons on the compatibility,
miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis
studied the processing and phase morphology relationship of compatibilized polylefin
blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in
dispersion and interfacial adhesion and a decrease in particle of t
reported to be due to specific interaction between nylon and the ionomer at the interface in the blend
of polyethylene and nylon similarly [5].
Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, the
samples of different molecular weight from polystyrene. They found the morphology of the blends
changed where spherical domains of one component, dispersed in continuous matrix of the other,
changed to a highly non homogeneous mixture of fibr
components. This change in morphology depends on the composition and molecular weight of
polystyrene [6].
Commonly abbreviated PVC, is the third
and polypropylene. PVC is used in construction because it is more effective than traditional materials
such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more
flexible by the addition of plasticizers, the most widely used being phthal
used in clothing and upholstery, electrical cable insulation, inflatable products and many applications
in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of
acrylonitrile and butadiene. Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR
is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent
fuel and oil resistance [9].
2. EXPERIMENT PART
The development of a new rubber composite material for applications that’s needs more
resistance to liquids attack, requires many tests under the effect of temperature, and oils.
The suitable recipe for these applications suggests processes to improve the
provides laboratory samples of various recipes for testing the various kinds of recipes for study under
the effect of addition of the suggested materials required a preparation of some reinforcement
materials.
Raw Material: Acrylonitrile butadiene rubber (NBR).
Reinforcement Material: Polyvinyl chloride (
The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of
some of materials (such as zinc oxide, stearic acid, sulfur, Antioxidant, Carbon
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976
6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
35
Fig. 1: Polymer blend
Many articles were devoted to studying the effect of different reasons on the compatibility,
miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis
the processing and phase morphology relationship of compatibilized polylefin
blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in
dispersion and interfacial adhesion and a decrease in particle of the dispersed nylon phase. This was
reported to be due to specific interaction between nylon and the ionomer at the interface in the blend
of polyethylene and nylon similarly [5].
Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, the
samples of different molecular weight from polystyrene. They found the morphology of the blends
changed where spherical domains of one component, dispersed in continuous matrix of the other,
changed to a highly non homogeneous mixture of fibrous or cabbage-like macro-
components. This change in morphology depends on the composition and molecular weight of
Commonly abbreviated PVC, is the third-most widely produced plastic, after polyethylene
PVC is used in construction because it is more effective than traditional materials
such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more
flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is also
used in clothing and upholstery, electrical cable insulation, inflatable products and many applications
in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of
. Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR
is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent
The development of a new rubber composite material for applications that’s needs more
resistance to liquids attack, requires many tests under the effect of temperature, and oils.
The suitable recipe for these applications suggests processes to improve the
provides laboratory samples of various recipes for testing the various kinds of recipes for study under
the effect of addition of the suggested materials required a preparation of some reinforcement
utadiene rubber (NBR).
: Polyvinyl chloride (PVC).
The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of
some of materials (such as zinc oxide, stearic acid, sulfur, Antioxidant, Carbon black.etc).
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
© IAEME
Many articles were devoted to studying the effect of different reasons on the compatibility,
miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis
the processing and phase morphology relationship of compatibilized polylefin-polyamide
blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in
he dispersed nylon phase. This was
reported to be due to specific interaction between nylon and the ionomer at the interface in the blend
Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, there are three
samples of different molecular weight from polystyrene. They found the morphology of the blends
changed where spherical domains of one component, dispersed in continuous matrix of the other,
-domains of both
components. This change in morphology depends on the composition and molecular weight of
most widely produced plastic, after polyethylene
PVC is used in construction because it is more effective than traditional materials
such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more
ates. In this form, it is also
used in clothing and upholstery, electrical cable insulation, inflatable products and many applications
in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of
. Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR
is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent
The development of a new rubber composite material for applications that’s needs more
resistance to liquids attack, requires many tests under the effect of temperature, and oils.
The suitable recipe for these applications suggests processes to improve these parts and to
provides laboratory samples of various recipes for testing the various kinds of recipes for study under
the effect of addition of the suggested materials required a preparation of some reinforcement
The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of
black.etc).
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
36
The Batch No.2: For development of new kinds of rubber composite recipes which are suitable for
application as shock absorbers or automobile supports and comparing them with the original sample,
some modifications on batch were (No.1) carried out and the resultant batch is called batch (No.2),
where Polyvinyl chloride PVC with as a weight percentages (30, 50 and 70)%wt. was added.
Table.1: materials content in the master batch
Materials content pphr %
PVC 0 , 30 , 50 , 70
NBR 100 , 70 , 50 , 30
Carbon black 660 40
MBTS 0.7
Sulfur 1.5
Zinc oxide 3
Stearic acid 1
The batch is prepared by adding the materials accord to their order in Table.1 by using the
laboratory mill as shown in Fig.2 and in stepwise with different mixing time according to Table.2.
Table.2: steps of making recipe master batch
Time MinDescriptionItem
5
Pass NBR between the two rolls mill several times with
decreasing the distance between the two rolls to the extent
of (0.5-1) mm at 70 c
1
5
Add sulfur follows by mixing for homogenization of the
materials under room temperature
2
5Add of zinc oxide and repeat item23
5Add of stearic acid and repeat item24
8
Add DOP oil. which takes place by (1-5)ml per minute with
repeating item2
5
5Add accelerator TMTD and repeat item26
5Add antioxidant and repeat item27
5Add of HMT and repeat item28
5The mixing process continues for more time in order to get
a good homogenization and paste draw as plate with a
thickness about 7-10 µm
9
Fig 2: Laboratory mill
Immersion: PVC/NBR blend specimens were immersed in 80 ml engine oil and distilled water at
room temperature then observed the changing Hardness of blend.
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
37
Samples: For preparing samples for hardness tests, the mould in the laboratories of Tires Company
was used. The mould consists of three parts, the middle part in a dimension of (200×180×6.5mm)
which contains four circular equivolume open with 6.5mm diameter and 35mm thickness while one
of other two the parts on of is bottom base and the other is a cover for the purpose of samples
thickness regulation .They have a dimension of (150×150×10mm) as shown in Fig .3.
Fig. 3: Mould for testing hardness
Equipment for Hardness Measurement: The International Hardness test is used in measurement of
the penetration of rigid ball into the rubber specimen under specified conditions .The measured
penetration is converted to the International Rubber Hardness Degrees (IRHD) as shown in Fig.4.
The scale of degrees is so chosen that zero represents a material having elastic modulus equal
to zero and 100 represents a material of infinite elastic modulus. Test was carried out according to
ASTM D1415 specifications.
Fig. 4: Equipment of hardness
3. RESULTS AND DISCUSSION
Fig.5 and Fig.6 shows the relation between the change hardness and PVC weight added to the
main recipe after immersion in oil and water respectively. We see that, the blends is having weaker
Hardness property than pure Polymer, where the Hardness will decrease with exponentially relation
during the immersion period in the oil and water, because of the penetration of oil and water
molecules which increase the extending between the main chains and cause the weakening in
secondary forces of (vander walls) and crosslink so that the Brownian motion of molecular chains
will increases and this results agrees with other workers [10].
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
38
Fig. 5: Change in Hardness weekly during immersion in oil
At last the result is hardness decreasing. By increasing PVC content in NBR Hardness will decrease
due to decreasing in Carbon black which presents in NBR that attracts Hydrocarbon and water
molecules and cause changing in volume, and weight [11].
Fig. 6: Changing in Hardness weekly during immersion in distilled water
4. CONCLUSION
This paper introduces a new study of PVC - Acrylonitrile butadiene rubber (NBR) Blends
.The hardness of pure polymer better than for blend, where the hardness of blends will decrease after
immersion in oil and water and continue to decrease with the increase in the proportion of PVC
additives to the rubber, as well as a decrease in hardness when immersion in oil greater than when
immersion in water.
REFERENCES
[1] Berlin A. A., Volfson S. A., “Principle of Polymer Composite” Springer verlag, New York,
1986.
[2] Chartes A., Handbook of plastics, Elastomers and composite, 4th Edition Mc GRAW-Hill
,2004.
[3] Ibrahim Buthaina A., Kadum Karrer M., Influence of Polymer Blending on Mechanical and
Thermal Properties, Modern Applied Science, 4(9), pp.157-161 ,2010 .
[4] Robeson Lloyd M. " Polymer Blends: A Comprehensive Review ", Hanser.
[5] Merfeld G.D., Paul D.R. "polymer blends: formulation", Vel1, John wileg and sons, Inc,
USA, 2000.
[6] Willis J. M., Favis B.D. "Processing-morphology relationships of compatibilized
polyolefin/polyamide blends. Part I: The effect of an lonomer compatibilizer on blend
International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 –
6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME
39
morphology", Polymer Engineering & Science, 28(21), pp.1416-1426, 1988.
[7] Barlow J. W. and Paul D. R. "Polymer blends and alloys—a review of selected
considerations", Polymer Engineering & Science", 21(15), pp.985-996, 1981.
[8] J.S. Park, J.W. Park, E. Ruckenstein, Thermal and Dynamic Mechanical Analysis of PVA/MC
Blend Hydrogels, Polymer, 42(9), pp.4271-4280, 2001.
[9] Ali I.Al-Mosawi, Haider.K.Ammash, Ali.J. Salaman Properties of composite materials
databook, 2nd
edition, Lambert Academic Publishing LAP, 2012.
[10] Dr. Utpal Kumar Niyogi, “Polymer Additives and Compounding: Additives for Rubbers”,
Shri Ram Institute for Industrial Research, India, 2007.
[11] Zhen Xiu Zhang, Chun Hua Chen, Xin Wen Gao, Jin Kuk Kim, Zhen Xiang Xin, "A study on
the compatibility and physical properties of chlorinated polyethylene rubber/nitrile rubber
blends", Journal of Applied Polymer Science, 120(2), pp.1180-1185, 2011.
[12] S.Shankar, Dr.H.K.Shivanand and Santhosh Kumar.S, “Experimental Evaluation of Flexural
Properties of Polymer Matrix Composites”, International Journal of Mechanical Engineering
& Technology (IJMET), Volume 3, Issue 3, 2012, pp. 504 - 510, ISSN Print: 0976 – 6340,
ISSN Online: 0976 – 6359.
[13] Ahmed Thabet and Youssef A. Mobarak, “Experimental Study for Dielectric Strength of New
Nanocomposite Polyethylene Industrial Materials”, International Journal of Electrical
Engineering & Technology (IJEET), Volume 3, Issue 1, 2012, pp. 353 - 364, ISSN Print:
0976-6545, ISSN Online: 0976-6553.
[14] R.Umamaheswarrao, T.Venkatasylaja and Dr. K N S Suman, “Improvement of Toughness
and Stiffness of Biopolymer Blends using PCA Based Taguchi Approach”, International
Journal of Mechanical Engineering & Technology (IJMET), Volume 4, Issue 4, 2013,
pp. 401 - 413, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359.
[15] Siddhant Datta, B.M. Nagabhushana and R. Harikrishna, “A New Nano-Ceria Reinforced
Epoxy Polymer Composite with Improved Mechanical Properties”, International Journal of
Advanced Research in Engineering & Technology (IJARET), Volume 3, Issue 2, 2012,
pp. 248 - 256, ISSN Print: 0976-6480, ISSN Online: 0976-6499.

Más contenido relacionado

La actualidad más candente

Hybrid natural fiber reinforced polyester composites
Hybrid natural fiber reinforced polyester compositesHybrid natural fiber reinforced polyester composites
Hybrid natural fiber reinforced polyester compositesGokul Kannan
 
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...IAEME Publication
 
Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...eSAT Publishing House
 
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...ijceronline
 
Thermoplastics : Introduction,classification,Processing & applications
Thermoplastics : Introduction,classification,Processing & applicationsThermoplastics : Introduction,classification,Processing & applications
Thermoplastics : Introduction,classification,Processing & applicationsPratik Chaudhari
 
Ijmsr 2016-13
Ijmsr 2016-13Ijmsr 2016-13
Ijmsr 2016-13ijmsr
 
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...IRJET Journal
 
Study on properties of sisal fiber reinforced concrete with different mix pro...
Study on properties of sisal fiber reinforced concrete with different mix pro...Study on properties of sisal fiber reinforced concrete with different mix pro...
Study on properties of sisal fiber reinforced concrete with different mix pro...eSAT Journals
 
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans Fiber
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans FiberIRJET- Review Paper on Concrete using Soft Drink Aluminum Cans Fiber
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans FiberIRJET Journal
 
To Study the mechanical properties of coconut coir fiber reinforced with epo...
To Study the mechanical properties of coconut coir fiber  reinforced with epo...To Study the mechanical properties of coconut coir fiber  reinforced with epo...
To Study the mechanical properties of coconut coir fiber reinforced with epo...IJMER
 
A0412401011
A0412401011A0412401011
A0412401011IOSR-JEN
 
fabrication and testing of palm fiber reinforced composite
 fabrication and testing of palm fiber reinforced  composite  fabrication and testing of palm fiber reinforced  composite
fabrication and testing of palm fiber reinforced composite magarajothi sam
 
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...IJRES Journal
 
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...IRJET Journal
 
coir fiber reinforced prefabricated panels
coir fiber reinforced prefabricated panelscoir fiber reinforced prefabricated panels
coir fiber reinforced prefabricated panelskathiravan Gnanasekaran
 
Chem unit-3-rubbers
Chem unit-3-rubbersChem unit-3-rubbers
Chem unit-3-rubbersKrishna Gali
 

La actualidad más candente (20)

Hybrid natural fiber reinforced polyester composites
Hybrid natural fiber reinforced polyester compositesHybrid natural fiber reinforced polyester composites
Hybrid natural fiber reinforced polyester composites
 
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...
EXPERIMENTAL STUDY ON WEAR BEHAVIOUR OF SIC FILLED HYBRID COMPOSITES USING TA...
 
Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...
 
Natural Fibers Polymeric Composites with Particulate Fillers – A review report
Natural Fibers Polymeric Composites with Particulate Fillers – A review reportNatural Fibers Polymeric Composites with Particulate Fillers – A review report
Natural Fibers Polymeric Composites with Particulate Fillers – A review report
 
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...
MECHANICAL CHARACTERIZATION OF BIO-FIBRE AND GLASS FIBRE REINFORCED POLYESTER...
 
Thermoplastics : Introduction,classification,Processing & applications
Thermoplastics : Introduction,classification,Processing & applicationsThermoplastics : Introduction,classification,Processing & applications
Thermoplastics : Introduction,classification,Processing & applications
 
Ijmsr 2016-13
Ijmsr 2016-13Ijmsr 2016-13
Ijmsr 2016-13
 
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...
IRJET- Study of Strength of Concrete using Areca Fiber and Tile Powder as Add...
 
Study on properties of sisal fiber reinforced concrete with different mix pro...
Study on properties of sisal fiber reinforced concrete with different mix pro...Study on properties of sisal fiber reinforced concrete with different mix pro...
Study on properties of sisal fiber reinforced concrete with different mix pro...
 
20320130406010
2032013040601020320130406010
20320130406010
 
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans Fiber
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans FiberIRJET- Review Paper on Concrete using Soft Drink Aluminum Cans Fiber
IRJET- Review Paper on Concrete using Soft Drink Aluminum Cans Fiber
 
Coconut fibres
Coconut fibresCoconut fibres
Coconut fibres
 
To Study the mechanical properties of coconut coir fiber reinforced with epo...
To Study the mechanical properties of coconut coir fiber  reinforced with epo...To Study the mechanical properties of coconut coir fiber  reinforced with epo...
To Study the mechanical properties of coconut coir fiber reinforced with epo...
 
A0412401011
A0412401011A0412401011
A0412401011
 
fabrication and testing of palm fiber reinforced composite
 fabrication and testing of palm fiber reinforced  composite  fabrication and testing of palm fiber reinforced  composite
fabrication and testing of palm fiber reinforced composite
 
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...
Role of Natural and Synthetic Fillers on Erosive Wear Behavior of Basalt -Epo...
 
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...
IRJET-Experimental Investigation on Polypropylene Fiber Reinforced Concrete f...
 
coir fiber reinforced prefabricated panels
coir fiber reinforced prefabricated panelscoir fiber reinforced prefabricated panels
coir fiber reinforced prefabricated panels
 
Chem unit-3-rubbers
Chem unit-3-rubbersChem unit-3-rubbers
Chem unit-3-rubbers
 
Trppt
TrpptTrppt
Trppt
 

Destacado

Event P&O 2.0 09: Werken 2.0
Event P&O 2.0 09: Werken 2.0Event P&O 2.0 09: Werken 2.0
Event P&O 2.0 09: Werken 2.0Jan Krans
 
Carta convite-conege-2015
Carta convite-conege-2015 Carta convite-conege-2015
Carta convite-conege-2015 enege
 
Lei complementar 039 de 15 de dez de 1998
Lei complementar 039 de 15 de dez de 1998Lei complementar 039 de 15 de dez de 1998
Lei complementar 039 de 15 de dez de 1998visa343302010
 
Delicious workshop
Delicious workshopDelicious workshop
Delicious workshopJan Krans
 
Het Nieuwe Werken
Het Nieuwe WerkenHet Nieuwe Werken
Het Nieuwe WerkenJan Krans
 
Abdul Wajid- PHSM training certificate
Abdul Wajid- PHSM training certificateAbdul Wajid- PHSM training certificate
Abdul Wajid- PHSM training certificateAbdul Wajid-GradIOSH
 
你最後悔的是什麼
你最後悔的是什麼你最後悔的是什麼
你最後悔的是什麼honan4108
 
Eng Shahzad Alam CV
Eng Shahzad Alam CVEng Shahzad Alam CV
Eng Shahzad Alam CVShahzad Alam
 
Innovative Learning
Innovative LearningInnovative Learning
Innovative LearningRyan Chung
 
EJERCICIOS DE EXCEL
EJERCICIOS DE EXCEL EJERCICIOS DE EXCEL
EJERCICIOS DE EXCEL ANDREA OCHOA
 
O método de proxectos e a iniciación á investigación, por exemplo
O método de proxectos e a iniciación á investigación, por exemploO método de proxectos e a iniciación á investigación, por exemplo
O método de proxectos e a iniciación á investigación, por exemploAgremon
 

Destacado (20)

20120140506009
2012014050600920120140506009
20120140506009
 
Event P&O 2.0 09: Werken 2.0
Event P&O 2.0 09: Werken 2.0Event P&O 2.0 09: Werken 2.0
Event P&O 2.0 09: Werken 2.0
 
Carta convite-conege-2015
Carta convite-conege-2015 Carta convite-conege-2015
Carta convite-conege-2015
 
Lei complementar 039 de 15 de dez de 1998
Lei complementar 039 de 15 de dez de 1998Lei complementar 039 de 15 de dez de 1998
Lei complementar 039 de 15 de dez de 1998
 
Delicious workshop
Delicious workshopDelicious workshop
Delicious workshop
 
Het Nieuwe Werken
Het Nieuwe WerkenHet Nieuwe Werken
Het Nieuwe Werken
 
llego la primavera
llego la primaverallego la primavera
llego la primavera
 
HIA-Resume
HIA-ResumeHIA-Resume
HIA-Resume
 
Animals part 2
Animals part 2Animals part 2
Animals part 2
 
Abdul Wajid- PHSM training certificate
Abdul Wajid- PHSM training certificateAbdul Wajid- PHSM training certificate
Abdul Wajid- PHSM training certificate
 
你最後悔的是什麼
你最後悔的是什麼你最後悔的是什麼
你最後悔的是什麼
 
40120140506003
4012014050600340120140506003
40120140506003
 
Eng Shahzad Alam CV
Eng Shahzad Alam CVEng Shahzad Alam CV
Eng Shahzad Alam CV
 
Mar cruel
Mar cruelMar cruel
Mar cruel
 
Innovative Learning
Innovative LearningInnovative Learning
Innovative Learning
 
EJERCICIOS DE EXCEL
EJERCICIOS DE EXCEL EJERCICIOS DE EXCEL
EJERCICIOS DE EXCEL
 
20320140506002 2
20320140506002 220320140506002 2
20320140506002 2
 
10120140506001
1012014050600110120140506001
10120140506001
 
O método de proxectos e a iniciación á investigación, por exemplo
O método de proxectos e a iniciación á investigación, por exemploO método de proxectos e a iniciación á investigación, por exemplo
O método de proxectos e a iniciación á investigación, por exemplo
 
fairmont poster_final
fairmont poster_finalfairmont poster_final
fairmont poster_final
 

Similar a 20120140506006

IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...
IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...
IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...IRJET Journal
 
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...IRJET Journal
 
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...IRJET Journal
 
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...IRJET Journal
 
IRJET- Experimental Study On Polypropylene Fiber Reinforcedconcrete
IRJET- Experimental Study On Polypropylene Fiber ReinforcedconcreteIRJET- Experimental Study On Polypropylene Fiber Reinforcedconcrete
IRJET- Experimental Study On Polypropylene Fiber ReinforcedconcreteIRJET Journal
 
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel matrix mo...
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel  matrix mo...A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel  matrix mo...
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel matrix mo...Adib Bin Rashid
 
Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...eSAT Journals
 
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...Salih Taner YILDIRIM
 
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...IRJET Journal
 
ahsan habib paper
ahsan habib paperahsan habib paper
ahsan habib paperahsan habib
 
Investigation on the effect of composition of calcium carbonate, cpw and dop ...
Investigation on the effect of composition of calcium carbonate, cpw and dop ...Investigation on the effect of composition of calcium carbonate, cpw and dop ...
Investigation on the effect of composition of calcium carbonate, cpw and dop ...eSAT Journals
 
Design and Analysis of Composite Bolt
Design and Analysis of Composite BoltDesign and Analysis of Composite Bolt
Design and Analysis of Composite BoltIRJET Journal
 
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of Concrete
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of ConcreteIRJET- A Review: Effect of Carbon Fiber on Different Mixes of Concrete
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of ConcreteIRJET Journal
 
Mechanical and microstructural characterization of fiber reinforced fly ash b...
Mechanical and microstructural characterization of fiber reinforced fly ash b...Mechanical and microstructural characterization of fiber reinforced fly ash b...
Mechanical and microstructural characterization of fiber reinforced fly ash b...Publ 2022
 
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETE
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETESTUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETE
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETEIRJET Journal
 
IRJET- Experimental Study on the Behaviour of Flexible Pavement with Poly...
IRJET-  	  Experimental Study on the Behaviour of Flexible Pavement with Poly...IRJET-  	  Experimental Study on the Behaviour of Flexible Pavement with Poly...
IRJET- Experimental Study on the Behaviour of Flexible Pavement with Poly...IRJET Journal
 
The effect of addition of nanofillers on three body abrasive wear behavior of...
The effect of addition of nanofillers on three body abrasive wear behavior of...The effect of addition of nanofillers on three body abrasive wear behavior of...
The effect of addition of nanofillers on three body abrasive wear behavior of...IAEME Publication
 

Similar a 20120140506006 (20)

IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...
IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...
IRJET- Experimental Investigation on Fibre Reinforcement Concrete by using Ma...
 
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...
IRJET- Mechanical Characterization of Polymer Matrix Composites for Transport...
 
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...
IRJET- Synthesis and Study on Effect of Thickness on 3-Point Bending Strength...
 
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...
A Study on Strength and Durability of Concrete Using Corn Cob Ash and Polyeth...
 
E012112836
E012112836E012112836
E012112836
 
IRJET- Experimental Study On Polypropylene Fiber Reinforcedconcrete
IRJET- Experimental Study On Polypropylene Fiber ReinforcedconcreteIRJET- Experimental Study On Polypropylene Fiber Reinforcedconcrete
IRJET- Experimental Study On Polypropylene Fiber Reinforcedconcrete
 
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel matrix mo...
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel  matrix mo...A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel  matrix mo...
A comparative study on the influence of MWCNT, GO, and Al(OH)3 gel matrix mo...
 
Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...Study of the effects of carbon and glass fibre reinforcement and other filler...
Study of the effects of carbon and glass fibre reinforcement and other filler...
 
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...
Mechanical and Physical Performance of Concrete Including Waste Electrical Ca...
 
Ijmet 10 02_043
Ijmet 10 02_043Ijmet 10 02_043
Ijmet 10 02_043
 
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...
A Study on Effect of Carbon and Ash Fillers on Flexural Properties in GFRP Co...
 
ahsan habib paper
ahsan habib paperahsan habib paper
ahsan habib paper
 
Investigation on the effect of composition of calcium carbonate, cpw and dop ...
Investigation on the effect of composition of calcium carbonate, cpw and dop ...Investigation on the effect of composition of calcium carbonate, cpw and dop ...
Investigation on the effect of composition of calcium carbonate, cpw and dop ...
 
Design and Analysis of Composite Bolt
Design and Analysis of Composite BoltDesign and Analysis of Composite Bolt
Design and Analysis of Composite Bolt
 
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of Concrete
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of ConcreteIRJET- A Review: Effect of Carbon Fiber on Different Mixes of Concrete
IRJET- A Review: Effect of Carbon Fiber on Different Mixes of Concrete
 
Mechanical and microstructural characterization of fiber reinforced fly ash b...
Mechanical and microstructural characterization of fiber reinforced fly ash b...Mechanical and microstructural characterization of fiber reinforced fly ash b...
Mechanical and microstructural characterization of fiber reinforced fly ash b...
 
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETE
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETESTUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETE
STUDY OF FLEXURAL BEHAVIOR OF HYBRID FIBRE REINFORCED CONCERETE
 
IRJET- Experimental Study on the Behaviour of Flexible Pavement with Poly...
IRJET-  	  Experimental Study on the Behaviour of Flexible Pavement with Poly...IRJET-  	  Experimental Study on the Behaviour of Flexible Pavement with Poly...
IRJET- Experimental Study on the Behaviour of Flexible Pavement with Poly...
 
AE522_Fire Report_ben0425
AE522_Fire Report_ben0425AE522_Fire Report_ben0425
AE522_Fire Report_ben0425
 
The effect of addition of nanofillers on three body abrasive wear behavior of...
The effect of addition of nanofillers on three body abrasive wear behavior of...The effect of addition of nanofillers on three body abrasive wear behavior of...
The effect of addition of nanofillers on three body abrasive wear behavior of...
 

Más de IAEME Publication

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME Publication
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...IAEME Publication
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSIAEME Publication
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSIAEME Publication
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSIAEME Publication
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSIAEME Publication
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOIAEME Publication
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IAEME Publication
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYIAEME Publication
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...IAEME Publication
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEIAEME Publication
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...IAEME Publication
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...IAEME Publication
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...IAEME Publication
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...IAEME Publication
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...IAEME Publication
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...IAEME Publication
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...IAEME Publication
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...IAEME Publication
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTIAEME Publication
 

Más de IAEME Publication (20)

IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdfIAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
 
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
 
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURSA STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
 
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURSBROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
 
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONSDETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
 
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONSANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
 
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINOVOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
 
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
 
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMYVISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
 
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
 
GANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICEGANDHI ON NON-VIOLENT POLICE
GANDHI ON NON-VIOLENT POLICE
 
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
 
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
 
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
 
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
 
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
 
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
 
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
 
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
 
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENTA MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
 

Último

Babel Compiler - Transforming JavaScript for All Browsers.pptx
Babel Compiler - Transforming JavaScript for All Browsers.pptxBabel Compiler - Transforming JavaScript for All Browsers.pptx
Babel Compiler - Transforming JavaScript for All Browsers.pptxYounusS2
 
Nanopower In Semiconductor Industry.pdf
Nanopower  In Semiconductor Industry.pdfNanopower  In Semiconductor Industry.pdf
Nanopower In Semiconductor Industry.pdfPedro Manuel
 
NIST Cybersecurity Framework (CSF) 2.0 Workshop
NIST Cybersecurity Framework (CSF) 2.0 WorkshopNIST Cybersecurity Framework (CSF) 2.0 Workshop
NIST Cybersecurity Framework (CSF) 2.0 WorkshopBachir Benyammi
 
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just MinutesAI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just MinutesMd Hossain Ali
 
Introduction to Quantum Computing
Introduction to Quantum ComputingIntroduction to Quantum Computing
Introduction to Quantum ComputingGDSC PJATK
 
Empowering Africa's Next Generation: The AI Leadership Blueprint
Empowering Africa's Next Generation: The AI Leadership BlueprintEmpowering Africa's Next Generation: The AI Leadership Blueprint
Empowering Africa's Next Generation: The AI Leadership BlueprintMahmoud Rabie
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsSeth Reyes
 
Things you didn't know you can use in your Salesforce
Things you didn't know you can use in your SalesforceThings you didn't know you can use in your Salesforce
Things you didn't know you can use in your SalesforceMartin Humpolec
 
Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024SkyPlanner
 
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Adtran
 
Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1DianaGray10
 
UiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPathCommunity
 
Cloud Revolution: Exploring the New Wave of Serverless Spatial Data
Cloud Revolution: Exploring the New Wave of Serverless Spatial DataCloud Revolution: Exploring the New Wave of Serverless Spatial Data
Cloud Revolution: Exploring the New Wave of Serverless Spatial DataSafe Software
 
Linked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesLinked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesDavid Newbury
 
Comparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioComparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioChristian Posta
 
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdfJamie (Taka) Wang
 
Digital magic. A small project for controlling smart light bulbs.
Digital magic. A small project for controlling smart light bulbs.Digital magic. A small project for controlling smart light bulbs.
Digital magic. A small project for controlling smart light bulbs.francesco barbera
 
UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6DianaGray10
 
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyes
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyesHow to Effectively Monitor SD-WAN and SASE Environments with ThousandEyes
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyesThousandEyes
 
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfMachine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfAijun Zhang
 

Último (20)

Babel Compiler - Transforming JavaScript for All Browsers.pptx
Babel Compiler - Transforming JavaScript for All Browsers.pptxBabel Compiler - Transforming JavaScript for All Browsers.pptx
Babel Compiler - Transforming JavaScript for All Browsers.pptx
 
Nanopower In Semiconductor Industry.pdf
Nanopower  In Semiconductor Industry.pdfNanopower  In Semiconductor Industry.pdf
Nanopower In Semiconductor Industry.pdf
 
NIST Cybersecurity Framework (CSF) 2.0 Workshop
NIST Cybersecurity Framework (CSF) 2.0 WorkshopNIST Cybersecurity Framework (CSF) 2.0 Workshop
NIST Cybersecurity Framework (CSF) 2.0 Workshop
 
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just MinutesAI Fame Rush Review – Virtual Influencer Creation In Just Minutes
AI Fame Rush Review – Virtual Influencer Creation In Just Minutes
 
Introduction to Quantum Computing
Introduction to Quantum ComputingIntroduction to Quantum Computing
Introduction to Quantum Computing
 
Empowering Africa's Next Generation: The AI Leadership Blueprint
Empowering Africa's Next Generation: The AI Leadership BlueprintEmpowering Africa's Next Generation: The AI Leadership Blueprint
Empowering Africa's Next Generation: The AI Leadership Blueprint
 
Computer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and HazardsComputer 10: Lesson 10 - Online Crimes and Hazards
Computer 10: Lesson 10 - Online Crimes and Hazards
 
Things you didn't know you can use in your Salesforce
Things you didn't know you can use in your SalesforceThings you didn't know you can use in your Salesforce
Things you didn't know you can use in your Salesforce
 
Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024Salesforce Miami User Group Event - 1st Quarter 2024
Salesforce Miami User Group Event - 1st Quarter 2024
 
Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™Meet the new FSP 3000 M-Flex800™
Meet the new FSP 3000 M-Flex800™
 
Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1Secure your environment with UiPath and CyberArk technologies - Session 1
Secure your environment with UiPath and CyberArk technologies - Session 1
 
UiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation DevelopersUiPath Community: AI for UiPath Automation Developers
UiPath Community: AI for UiPath Automation Developers
 
Cloud Revolution: Exploring the New Wave of Serverless Spatial Data
Cloud Revolution: Exploring the New Wave of Serverless Spatial DataCloud Revolution: Exploring the New Wave of Serverless Spatial Data
Cloud Revolution: Exploring the New Wave of Serverless Spatial Data
 
Linked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond OntologiesLinked Data in Production: Moving Beyond Ontologies
Linked Data in Production: Moving Beyond Ontologies
 
Comparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and IstioComparing Sidecar-less Service Mesh from Cilium and Istio
Comparing Sidecar-less Service Mesh from Cilium and Istio
 
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf
20200723_insight_release_plan_v6.pdf20200723_insight_release_plan_v6.pdf
 
Digital magic. A small project for controlling smart light bulbs.
Digital magic. A small project for controlling smart light bulbs.Digital magic. A small project for controlling smart light bulbs.
Digital magic. A small project for controlling smart light bulbs.
 
UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6UiPath Studio Web workshop series - Day 6
UiPath Studio Web workshop series - Day 6
 
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyes
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyesHow to Effectively Monitor SD-WAN and SASE Environments with ThousandEyes
How to Effectively Monitor SD-WAN and SASE Environments with ThousandEyes
 
Machine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdfMachine Learning Model Validation (Aijun Zhang 2024).pdf
Machine Learning Model Validation (Aijun Zhang 2024).pdf
 

20120140506006

  • 1. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 34 MECHANICAL BEHAVIOR OF NBR-PVC MIXTURE AFTER IMMERSION IN DIFFERENT MEDIA Mohammed H. Al-Maamori1 , Ali I. Al-Mosawi2 , Haider A. Yasser3 1, 3 College of Engineering Materials, Babylon University, IRAQ 2 Free Consultation, Babylon, Hilla, IRAQ ABSTRACT Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer equivalents. Effect of immersion in oil and water on hardness of Acrylonitrile butadiene rubber (NBR) Blends reinforced by (30, 50 and 70%) PVC were studied in this paper. The results from this work show that the strength will impairment after immersion in oil and water as a result of the penetration of the oil and water molecules within NBR- PVC blend, which increase the extending between the main chains and cause the weakening in secondary forces of (vander walls) and crosslink so that the Brownian motion of molecular chains will increases Which leads to a decrease in hardness. Keywords: NBR-PVC Blend, Immersion Media, Hardness. 1. INTRODUCTION Blending, grafting and copolymerization are commonly used to increase the ductility and toughness of brittle polymers or to increase the stiffness of rubbery polymers. A blend is a mixture of two or more polymers. A graft is where long side chains of a second polymer are chemically attached to the base polymer A copolymer is where chemical combination exists in the main chain between two polymers [A] j and [B],,. A copolymer can be a block copolymer [AAA...] [BB] or a random copolymer ABAABAB, the latter having no long sequences of A or B units (see Fig.1) [1]. Blending of NBR with other polymers is carried out to achieve any of the following advantages: enhanced ozone resistance, low temperature flexibility and ageing resistance, increased abrasion resistance and better swelling behavior [2]. INTERNATIONAL JOURNAL OF ADVANCED RESEARCH IN ENGINEERING AND TECHNOLOGY (IJARET) ISSN 0976 - 6480 (Print) ISSN 0976 - 6499 (Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME: http://www.iaeme.com/IJARET.asp Journal Impact Factor (2014): 7.8273 (Calculated by GISI) www.jifactor.com IJARET © I A E M E
  • 2. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. Many articles were devoted to studying the effect of different reasons on the compatibility, miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis studied the processing and phase morphology relationship of compatibilized polylefin blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in dispersion and interfacial adhesion and a decrease in particle of t reported to be due to specific interaction between nylon and the ionomer at the interface in the blend of polyethylene and nylon similarly [5]. Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, the samples of different molecular weight from polystyrene. They found the morphology of the blends changed where spherical domains of one component, dispersed in continuous matrix of the other, changed to a highly non homogeneous mixture of fibr components. This change in morphology depends on the composition and molecular weight of polystyrene [6]. Commonly abbreviated PVC, is the third and polypropylene. PVC is used in construction because it is more effective than traditional materials such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthal used in clothing and upholstery, electrical cable insulation, inflatable products and many applications in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of acrylonitrile and butadiene. Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent fuel and oil resistance [9]. 2. EXPERIMENT PART The development of a new rubber composite material for applications that’s needs more resistance to liquids attack, requires many tests under the effect of temperature, and oils. The suitable recipe for these applications suggests processes to improve the provides laboratory samples of various recipes for testing the various kinds of recipes for study under the effect of addition of the suggested materials required a preparation of some reinforcement materials. Raw Material: Acrylonitrile butadiene rubber (NBR). Reinforcement Material: Polyvinyl chloride ( The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of some of materials (such as zinc oxide, stearic acid, sulfur, Antioxidant, Carbon International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 35 Fig. 1: Polymer blend Many articles were devoted to studying the effect of different reasons on the compatibility, miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis the processing and phase morphology relationship of compatibilized polylefin blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in dispersion and interfacial adhesion and a decrease in particle of the dispersed nylon phase. This was reported to be due to specific interaction between nylon and the ionomer at the interface in the blend of polyethylene and nylon similarly [5]. Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, the samples of different molecular weight from polystyrene. They found the morphology of the blends changed where spherical domains of one component, dispersed in continuous matrix of the other, changed to a highly non homogeneous mixture of fibrous or cabbage-like macro- components. This change in morphology depends on the composition and molecular weight of Commonly abbreviated PVC, is the third-most widely produced plastic, after polyethylene PVC is used in construction because it is more effective than traditional materials such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is also used in clothing and upholstery, electrical cable insulation, inflatable products and many applications in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of . Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent The development of a new rubber composite material for applications that’s needs more resistance to liquids attack, requires many tests under the effect of temperature, and oils. The suitable recipe for these applications suggests processes to improve the provides laboratory samples of various recipes for testing the various kinds of recipes for study under the effect of addition of the suggested materials required a preparation of some reinforcement utadiene rubber (NBR). : Polyvinyl chloride (PVC). The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of some of materials (such as zinc oxide, stearic acid, sulfur, Antioxidant, Carbon black.etc). International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – © IAEME Many articles were devoted to studying the effect of different reasons on the compatibility, miscibility, morphology, and mechanical properties for the polymer blend [3]. Willis and Favis the processing and phase morphology relationship of compatibilized polylefin-polyamide blends with the help of an ionomer compatibilizer [4]. They found that there is an abrupt increase in he dispersed nylon phase. This was reported to be due to specific interaction between nylon and the ionomer at the interface in the blend Wycisk R,et.al prepared polymer blend from polyethylene and polystyrene, there are three samples of different molecular weight from polystyrene. They found the morphology of the blends changed where spherical domains of one component, dispersed in continuous matrix of the other, -domains of both components. This change in morphology depends on the composition and molecular weight of most widely produced plastic, after polyethylene PVC is used in construction because it is more effective than traditional materials such as copper, iron or wood in pipe and profile applications[7]. It can be made softer and more ates. In this form, it is also used in clothing and upholstery, electrical cable insulation, inflatable products and many applications in which it replaces rubber [8]. NBR, also termed nitrile rubber, is an emulsion copolymer of . Acrylonitrile content varies from 18 to 50%. Unlike CR, polarity in NBR is introduced by copolymerization with the polar monomer, acrylonitrile, which imparts excellent The development of a new rubber composite material for applications that’s needs more resistance to liquids attack, requires many tests under the effect of temperature, and oils. The suitable recipe for these applications suggests processes to improve these parts and to provides laboratory samples of various recipes for testing the various kinds of recipes for study under the effect of addition of the suggested materials required a preparation of some reinforcement The Batch No.1: The batch was prepared from Acrylonitrile butadiene rubber (NBR) with addition of black.etc).
  • 3. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 36 The Batch No.2: For development of new kinds of rubber composite recipes which are suitable for application as shock absorbers or automobile supports and comparing them with the original sample, some modifications on batch were (No.1) carried out and the resultant batch is called batch (No.2), where Polyvinyl chloride PVC with as a weight percentages (30, 50 and 70)%wt. was added. Table.1: materials content in the master batch Materials content pphr % PVC 0 , 30 , 50 , 70 NBR 100 , 70 , 50 , 30 Carbon black 660 40 MBTS 0.7 Sulfur 1.5 Zinc oxide 3 Stearic acid 1 The batch is prepared by adding the materials accord to their order in Table.1 by using the laboratory mill as shown in Fig.2 and in stepwise with different mixing time according to Table.2. Table.2: steps of making recipe master batch Time MinDescriptionItem 5 Pass NBR between the two rolls mill several times with decreasing the distance between the two rolls to the extent of (0.5-1) mm at 70 c 1 5 Add sulfur follows by mixing for homogenization of the materials under room temperature 2 5Add of zinc oxide and repeat item23 5Add of stearic acid and repeat item24 8 Add DOP oil. which takes place by (1-5)ml per minute with repeating item2 5 5Add accelerator TMTD and repeat item26 5Add antioxidant and repeat item27 5Add of HMT and repeat item28 5The mixing process continues for more time in order to get a good homogenization and paste draw as plate with a thickness about 7-10 µm 9 Fig 2: Laboratory mill Immersion: PVC/NBR blend specimens were immersed in 80 ml engine oil and distilled water at room temperature then observed the changing Hardness of blend.
  • 4. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 37 Samples: For preparing samples for hardness tests, the mould in the laboratories of Tires Company was used. The mould consists of three parts, the middle part in a dimension of (200×180×6.5mm) which contains four circular equivolume open with 6.5mm diameter and 35mm thickness while one of other two the parts on of is bottom base and the other is a cover for the purpose of samples thickness regulation .They have a dimension of (150×150×10mm) as shown in Fig .3. Fig. 3: Mould for testing hardness Equipment for Hardness Measurement: The International Hardness test is used in measurement of the penetration of rigid ball into the rubber specimen under specified conditions .The measured penetration is converted to the International Rubber Hardness Degrees (IRHD) as shown in Fig.4. The scale of degrees is so chosen that zero represents a material having elastic modulus equal to zero and 100 represents a material of infinite elastic modulus. Test was carried out according to ASTM D1415 specifications. Fig. 4: Equipment of hardness 3. RESULTS AND DISCUSSION Fig.5 and Fig.6 shows the relation between the change hardness and PVC weight added to the main recipe after immersion in oil and water respectively. We see that, the blends is having weaker Hardness property than pure Polymer, where the Hardness will decrease with exponentially relation during the immersion period in the oil and water, because of the penetration of oil and water molecules which increase the extending between the main chains and cause the weakening in secondary forces of (vander walls) and crosslink so that the Brownian motion of molecular chains will increases and this results agrees with other workers [10].
  • 5. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 38 Fig. 5: Change in Hardness weekly during immersion in oil At last the result is hardness decreasing. By increasing PVC content in NBR Hardness will decrease due to decreasing in Carbon black which presents in NBR that attracts Hydrocarbon and water molecules and cause changing in volume, and weight [11]. Fig. 6: Changing in Hardness weekly during immersion in distilled water 4. CONCLUSION This paper introduces a new study of PVC - Acrylonitrile butadiene rubber (NBR) Blends .The hardness of pure polymer better than for blend, where the hardness of blends will decrease after immersion in oil and water and continue to decrease with the increase in the proportion of PVC additives to the rubber, as well as a decrease in hardness when immersion in oil greater than when immersion in water. REFERENCES [1] Berlin A. A., Volfson S. A., “Principle of Polymer Composite” Springer verlag, New York, 1986. [2] Chartes A., Handbook of plastics, Elastomers and composite, 4th Edition Mc GRAW-Hill ,2004. [3] Ibrahim Buthaina A., Kadum Karrer M., Influence of Polymer Blending on Mechanical and Thermal Properties, Modern Applied Science, 4(9), pp.157-161 ,2010 . [4] Robeson Lloyd M. " Polymer Blends: A Comprehensive Review ", Hanser. [5] Merfeld G.D., Paul D.R. "polymer blends: formulation", Vel1, John wileg and sons, Inc, USA, 2000. [6] Willis J. M., Favis B.D. "Processing-morphology relationships of compatibilized polyolefin/polyamide blends. Part I: The effect of an lonomer compatibilizer on blend
  • 6. International Journal of Advanced Research in Engineering and Technology (IJARET), ISSN 0976 – 6480(Print), ISSN 0976 – 6499(Online) Volume 5, Issue 6, June (2014), pp. 34-39 © IAEME 39 morphology", Polymer Engineering & Science, 28(21), pp.1416-1426, 1988. [7] Barlow J. W. and Paul D. R. "Polymer blends and alloys—a review of selected considerations", Polymer Engineering & Science", 21(15), pp.985-996, 1981. [8] J.S. Park, J.W. Park, E. Ruckenstein, Thermal and Dynamic Mechanical Analysis of PVA/MC Blend Hydrogels, Polymer, 42(9), pp.4271-4280, 2001. [9] Ali I.Al-Mosawi, Haider.K.Ammash, Ali.J. Salaman Properties of composite materials databook, 2nd edition, Lambert Academic Publishing LAP, 2012. [10] Dr. Utpal Kumar Niyogi, “Polymer Additives and Compounding: Additives for Rubbers”, Shri Ram Institute for Industrial Research, India, 2007. [11] Zhen Xiu Zhang, Chun Hua Chen, Xin Wen Gao, Jin Kuk Kim, Zhen Xiang Xin, "A study on the compatibility and physical properties of chlorinated polyethylene rubber/nitrile rubber blends", Journal of Applied Polymer Science, 120(2), pp.1180-1185, 2011. [12] S.Shankar, Dr.H.K.Shivanand and Santhosh Kumar.S, “Experimental Evaluation of Flexural Properties of Polymer Matrix Composites”, International Journal of Mechanical Engineering & Technology (IJMET), Volume 3, Issue 3, 2012, pp. 504 - 510, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359. [13] Ahmed Thabet and Youssef A. Mobarak, “Experimental Study for Dielectric Strength of New Nanocomposite Polyethylene Industrial Materials”, International Journal of Electrical Engineering & Technology (IJEET), Volume 3, Issue 1, 2012, pp. 353 - 364, ISSN Print: 0976-6545, ISSN Online: 0976-6553. [14] R.Umamaheswarrao, T.Venkatasylaja and Dr. K N S Suman, “Improvement of Toughness and Stiffness of Biopolymer Blends using PCA Based Taguchi Approach”, International Journal of Mechanical Engineering & Technology (IJMET), Volume 4, Issue 4, 2013, pp. 401 - 413, ISSN Print: 0976 – 6340, ISSN Online: 0976 – 6359. [15] Siddhant Datta, B.M. Nagabhushana and R. Harikrishna, “A New Nano-Ceria Reinforced Epoxy Polymer Composite with Improved Mechanical Properties”, International Journal of Advanced Research in Engineering & Technology (IJARET), Volume 3, Issue 2, 2012, pp. 248 - 256, ISSN Print: 0976-6480, ISSN Online: 0976-6499.