Keppel Ltd. 1Q 2024 Business Update Presentation Slides
Published patent and design registration information november 9th, 2012
1. ¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ
úÖ
¿ÖÖÃÖúßµÖ •Ö−ÖÔ»Ö
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
×−ÖÖÔ´Ö−Ö ÃÖÓ. 45/2012 ¿ÖãÎú¾ÖÖ¸ü פü−ÖÖÓú: 09/11/2012
ISSUE NO. 45/2012 FRIDAY DATE: 09/11/2012
¯Öê™ëü™ü úÖµÖÖÔ»ÖµÖ úÖ ‹ú ¯ÖÏúÖ¿Ö−Ö
PUBLICATION OF THE PATENT OFFICE
20936
The Patent Office Journal 09/11/2012
2. INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
9th NOVEMBER, 2012
20937
The Patent Office Journal 09/11/2012
3. CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 20939 – 20940
SPECIAL NOTICE : 20941 – 20942
EARLY PUBLICATION (DELHI) : 20943 – 20947
EARLY PUBLICATION (MUMBAI) : 20948 – 20952
EARLY PUBLICATION (CHENNAI) : 20953 – 20977
EARLY PUBLICATION (KOLKATA) : 20978 – 20979
PUBLICATION AFTER 18 MONTHS (DELHI) : 20980 – 21179
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 21180 – 21279
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 21280 – 21479
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 21480 – 21596
PUBLICATION U/R 84[3] IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENTS (CHENNAI) : 21597
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (DELHI) : 21598 – 21600
PUBLICATION UNDER SECTION 43(2) IN
RESPECT OF THE GRANT (MUMBAI) : 21601 – 21606
PUBLICATION UNDER SECTION 43(2) IN : 21607 – 21609
RESPECT OF THE GRANT (CHENNAI)
PUBLICATION UNDER SECTION 43(2) IN
: 21610
RESPECT OF THE GRANT (KOLKATA)
INTRODUCTION TO DESIGN PUBLICATION : 21611
DESIGN CORRIGENDUM : 21612
COPYRIGHT PUBLICATION : 21613
THE DESIGNS ACT 2000 SECTION 30 DESIGN
ASSIGNMENT : 21614
DESIGNS ACT 2000 (UNDER SECTION 31)
RECTIFICATION OF REGISTER : 21615
REGISTRATION OF DESIGNS : 21616 - 21665
20938
The Patent Office Journal 09/11/2012
4. THE PATENT OFFICE
KOLKATA, 09/11/2012
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their
Territorial Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents, 4 The Patent Office,
Designs & Trade Marks, Government of India,
Boudhik Sampada Bhavan, Intellectual Property Rights Building,
Near Antop Hill Post Office,S.M.Road,Antop Hill, G.S.T. Road, Guindy,
Mumbai – 400 037 Chennai – 600 032.
Phone: (91)(22) 24123311, Phone: (91)(44) 2250 2081-84
Fax : (91)(22) 24123322 Fax : (91)(44) 2250 2066
E-mail: cgpdtm@nic.in E-mail: chennai-patent@nic.in
The States of Andhra Pradesh, Karnataka,
Kerala, Tamil Nadu and the Union
Territories of Puducherry and Lakshadweep.
2 The Patent Office,
Government of India, 5 The Patent Office (Head Office),
Boudhik Sampada Bhavan, Government of India,
Near Antop Hill Post Office,S.M.Road,Antop Hill, Boudhik Sampada Bhavan,
Mumbai – 400 037 CP-2, Sector –V, Salt Lake City,
Phone: (91)(22) 24137701 Kolkata- 700 091
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in Phone: (91)(33) 2367 1943/44/45/46/87
The States of Gujarat, Maharashtra, Madhya Fax: (91)(33) 2367 1988
Pradesh, Goa and Chhattisgarh and the Union E-Mail: kolkata-patent@nic.in
Territories of Daman and Diu & Dadra and Nagar
Haveli
Rest of India
3 The Patent Office,
Government of India,
Boudhik Sampada Bhavan,
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
The States of Haryana, Himachal Pradesh,
Jammu and Kashmir, Punjab, Rajasthan, Uttar
Pradesh, Uttaranchal, Delhi and the Union
Territory of Chandigarh.
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970 and The Patents
(Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received only at the appropriate offices of the
Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of Patents
drawn on a scheduled Bank at the place where the appropriate office is situated.
20939
The Patent Office Journal 09/11/2012
6. SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(CHAITANYA PRASAD)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
20941
The Patent Office Journal 09/11/2012
7. SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.
20942
The Patent Office Journal 09/11/2012
8. Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.2315/DEL/2011 A
(19) INDIA
(22) Date of filing of Application :16/08/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : CURE OF MALARIA BY HOMEO MEDICINE
(51) International classification :A61K (71)Name of Applicant :
(31) Priority Document No :NA 1)DR. L.S. CHAUHAN
(32) Priority Date :NA Address of Applicant :DR. N.L. VAISH DR. VAISH EYE
(33) Name of priority country :NA RESEARCH CENTER, 19/3 RASID MARKET CHANDRA
(86) International Application No :NA NAGAR DELHI-51 India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :NA 1)DR. L.S. CHAUHAN
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
AClinical trail on approx. 500 patient suffering form Malaria was done successfully under nosode drug therapy 400 patients did not
returned for the follow-up. since they were fully cured. Remaining 100 patients had their follow up check for improvement according
to symptoms and pathogenic exam. My treatment work is then authenticated pathologically by test of blood smear as per pathology
report. This has been experienced on the basis of report receivd for Lab. It is therefore evident that the medicine is very successful.
Some homeopathic medicine such as Chinium ars, Malaria off, Chine, Nutrum mur through exhaustive use has resulted in effective
treatment of malaria on human being. The research work on the disease has proved that homeopathic therapy is very affective in
eradicating the disease.
No. of Pages : 10 No. of Claims : 5
20943
The Patent Office Journal 09/11/2012
9. (12) PATENT APPLICATION PUBLICATION (21) Application No.2106/DEL/2012 A
(19) INDIA
(22) Date of filing of Application :06/07/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : WOODEN KNITTING NEEDLES WITH SQUARE CROSS SECTION AND THE METHOD OF
MANUFACTURING THEREOF
(51) International classification :B23B (71)Name of Applicant :
(31) Priority Document No :NA 1)KNITPRO INTERNATIONAL
(32) Priority Date :NA Address of Applicant :PLOT NO. PA - 010 - 001 & 014,
(33) Name of priority country :NA ENGINEERING ZONE, MAHINDRA WORLD CITY SPECIAL
(86) International Application No :NA ECONOMICS ZONE, JAIPUR (RAJ) 302037 INDIA
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)RASTOGI, ASHOLE KUMAR
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention generally relates to important to propose such knitting needle, particularly made of wood, which do not have
round surface and are structured as cuboid shaped knitting needles with four preferred surfaces and four edges thereto throughout the
needle body, wherein such proposed cuboid needles have square cross-sections, particularly defining the equivalent diameters of the
stitches created during knitting thereof. These proposed wooden cuboid shaped knitting needles, having square cross-sectional area,
are hereinafter referred as cubic knitting needle.
No. of Pages : 15 No. of Claims : 10
20944
The Patent Office Journal 09/11/2012
10. (12) PATENT APPLICATION PUBLICATION (21) Application No.3320/DEL/2011 A
(19) INDIA
(22) Date of filing of Application :21/11/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : A SYSTEM AND A METHOD FOR WATER PURIFICATION
(51) International classification :C07C (71)Name of Applicant :
(31) Priority Document No :NA 1)Aquamall Water Solutions LTD
(32) Priority Date :NA Address of Applicant :Lal Tappar Industrial Area Majri Grant
(33) Name of priority country :NA Uttarakhand Uttaranchal India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)Dr. Suresh Kumar Sisodia
(87) International Publication No : NA 2)Mr. Nirmal J.C.Patrick
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A system for purifying water using reverse osmosis includes a diverter valve, a lower pressure switch, a sediment cartridge, a plurality
of solenoid valves, a plurality of total dissolved solids (TDS) probe, a booster pump, an antiscalant reservoir, a pre carbon block, a
reverse osmosis membrane filter, a post carbon filter, a storage tank, a reject flow mechanism, and a plurality of non return valves.
Further, the reject flow mechanism and the sediment cartridge are configured to re-circulate reject/brine water that comes out of
reverse osmosis membrane filter in to the system.
No. of Pages : 31 No. of Claims : 16
20945
The Patent Office Journal 09/11/2012
11. (12) PATENT APPLICATION PUBLICATION (21) Application No.3744/DEL/2011 A
(19) INDIA
(22) Date of filing of Application :20/12/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : SYNCHRONIC WIND TURBINE GENERATOR
(51) International classification :H01R (71)Name of Applicant :
(31) Priority Document No :P110103701 1)INDUSTRIES METALURGICAS PASCARMONA
(32) Priority Date :05/10/2011 S.A.I.C Y.F.
(33) Name of priority country :Argentina Address of Applicant :CARRIL RODRIGUEZ PENA 2451
(86) International Application No :NA (M5503AHY) GODOY CRUZ, MENDOZA (AR) Argentina
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :NA 1)PESCARMONA, ENRIQUE
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A synchronic generator of the kind used in devices such as wind turbine generators and the like, where the synchronic generator
comprises at least a stator and at least two windings placed opposite and parallel to its rotation axis and at least a refrigeration system
that simplifies the structure and reduces the dimensions, with a magnetic induction by means of permanent magnets. The design of this
generator allows a better use of the space close to the external diameter of the generator allowing a power increase, minimizing the
weight, without increasing the external diameter of the generator, maintaining the length, flow density and the rotating speed, which
implies an advantage at the moment of the transportation from the factory to the building of the wind farm of destiny. On the other
hand, an additional advantage is that depending on the wind conditions one or both windings can work or both at the same time, which
optimizes its yield and versatility, also increasing its reliability since its converter adapts the energy of each winding to the network by
separate or in a parallel way. Another important advantage is that of sharing at least a refrigeration system, which reduces the spaces
and structural complexity of the complete machine.
No. of Pages : 13 No. of Claims : 12
20946
The Patent Office Journal 09/11/2012
12. (12) PATENT APPLICATION PUBLICATION (21) Application No.832/DEL/2012 A
(19) INDIA
(22) Date of filing of Application :21/03/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : MULTI-PURPOSE FOOD PROCESSING DEVICE
(51) International classification :B23B (71)Name of Applicant :
(31) Priority Document No :NA 1)PYARE LAL VISHWAKARMA
(32) Priority Date :NA Address of Applicant :D-52/34, L- LAKSHMI KUND,
(33) Name of priority country :NA VARANASI (U.P.) INDIA
(86) International Application No :NA 2)VIJAY KUMAR VISWAKARMA
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :NA 1)PYARELAL VISHWAKARMA
(61) Patent of Addition to Application Number :NA 2)VIJAY KUMAR VISWAKARMA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a multi-purpose food processing device comprising: a power supply system provided with: switch
control means for conducting electrical current which is a miniature circuit breaker (MCB) unit; at least two capacitors; an electronic
clutch for interconnecting the switch means and the capacitors; and an electric motor of AC induction type provided with: single fed
winding in series connected relationship with one another; a radial rotor provided in the center surrounded by stumping for driving the
rotatable processing means having basket winding and a field winding in series connected relationship with one another; at least two
ball bearings provided on both sides of the rotor mounted on a common conductive shaft which runs through the rotor and the ball
bearings. The present invention also relates to devices wherein the electric motor is provided with a means for connecting flour
grinder or mixer-grinder or oil extractor/processor attachment, separately or in combination.
No. of Pages : 50 No. of Claims : 64
20947
The Patent Office Journal 09/11/2012
13. (12) PATENT APPLICATION PUBLICATION (21) Application No.2015/MUM/2010 A
(19) INDIA
(22) Date of filing of Application :29/07/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : MOTOR DIFFERENTIAL
:H02K16/02, (71)Name of Applicant :
(51) International classification
B60K17/16 1)KPIT CUMMINS INFOSYSTEMS LTD
(31) Priority Document No :NA Address of Applicant :35 & 36, RAJIV GANDHI INFOTECH
(32) Priority Date :NA PARK, PHASE 1, MIDC, HINJEWADI, PUNE-411 057,
(33) Name of priority country :NA Maharashtra India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)MR. KSHATRIYA TEJAS KRISHNA
(87) International Publication No : NA 2)SABLE ANUP VITTHAL
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A method for using an electric motor as differential for a vehicle is disclosed. The electric motor for a hybrid or an electric vehicle is
utilized in a split manner in order to provide both, the transmission and the differential required for operating a vehicle. The motor
differential allows for rotating a pair of driving wheels at different speeds, mainly while turning of the vehicle. The split AC induction
motor comprising of stator windings and two independent rotors is utilized to generate the flux and the torque required for running the
vehicle as well as providing the differential action required for turning the vehicle.
No. of Pages : 19 No. of Claims : 7
20948
The Patent Office Journal 09/11/2012
14. (12) PATENT APPLICATION PUBLICATION (21) Application No.2473/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :27/08/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : A PROCESS FOR PREPARATION OF COBICISTAT INTERMEDIATE.
(71)Name of Applicant :
:C07D277/00,
(51) International classification 1)SEQUENT SCIENTIFIC LIMITED
A61P31/18
Address of Applicant :116 VARDHMAN INDUSTRIAL
(31) Priority Document No :NA
COMPLEX, L.B.S MARG, THANE (W), MUMBAI - 400 601,
(32) Priority Date :NA
Maharashtra India
(33) Name of priority country :NA
(72)Name of Inventor :
(86) International Application No :NA
1)MANJATHURU, MAHALINGA
Filing Date :NA
2)MAYEKAR, ANIL NARAYAN
(87) International Publication No : NA
3)DERAMBALA, YOGEESH
(61) Patent of Addition to Application Number :NA
4)CHANDRAPPA, PRASHANTHA NERLIKERE
Filing Date :NA
5)VASUDEVA, PEJAKALA KAKRANNAYA
(62) Divisional to Application Number :NA
6)ARULMOLI, THANGAVEL
Filing Date :NA
7)DAS, GAUTAM KUMAR
(57) Abstract :
The present invention discloses a novel process for the preparation of (2S, 3S, 5S)-5-amino-2-(N-((5-thiazolyl)-
methoxycarbonyl)amino)-l,6-diphenylhexane hydrochloride of formula II, which is a key intermediate in the preparation of cobicistat,
a drug under experimental investigation for use in the treatment of infection with the human immunodeficiency virus (HIV).
No. of Pages : 12 No. of Claims : 9
20949
The Patent Office Journal 09/11/2012
15. (12) PATENT APPLICATION PUBLICATION (21) Application No.2902/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :01/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : A PROCESS FOR PREPARATION OF BIS-(2,4-DICUMYLPHENYL) PENTAERYTHRITOL
DIPHOSPHITE
(71)Name of Applicant :
(51) International classification :C07F9/6574
1)SEQUENT SCIENTIFIC LIMITED
(31) Priority Document No :NA
Address of Applicant :116 VARDHMAN INDUSTRIAL
(32) Priority Date :NA
COMPLEX, L.B.S MARG, THANE(W), MUMBAI - 400 601,
(33) Name of priority country :NA
Maharashtra India
(86) International Application No :NA
(72)Name of Inventor :
Filing Date :NA
1)KAREGOUDAR, PRAKASH
(87) International Publication No : NA
2)HARIKRISHNA, NANDAM
(61) Patent of Addition to Application Number :NA
3)KALURKATTE, DIVYA SEETHARAM
Filing Date :NA
4)KRISHNA, BETTADAPURA GUNDAPPA
(62) Divisional to Application Number :NA
5)ARULMOLI, THANGAVEL
Filing Date :NA
6)DAS, GAUTAM KUMAR
(57) Abstract :
The present invention relates to a novel, cost-effective process for preparation of an Antioxidant bis (2,4-dicumyIphenyI)
pentaerythritol diphosphite commonly known as Doverphos-S-9228 of formula I by condensing pentaerythritol with 2,4-
dicumylphenol using a reagent and catalyst in presence of a solvent.
No. of Pages : 10 No. of Claims : 9
20950
The Patent Office Journal 09/11/2012
16. (12) PATENT APPLICATION PUBLICATION (21) Application No.3180/MUM/2010 A
(19) INDIA
(22) Date of filing of Application :05/08/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : A SYSTEM FOR PROTECTION OF EMBEDDED SOFTWARE CODES
:G06F12/14, (71)Name of Applicant :
(51) International classification
G06F21/00 1)KPIT CUMMINS INFOSYSTEMS LTD
(31) Priority Document No :NA Address of Applicant :35 AND 36, RAJIV GANDHI
(32) Priority Date :NA INFOTECH PARK, PHASE 1, MIDC, HINJAWADI, PUNE-411
(33) Name of priority country :NA 057, Maharashtra India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)DR. VINAY VAIDYA
(87) International Publication No :N/A 2)SUDHAKAR SAH
(61) Patent of Addition to Application Number :NA 3)CHAITANYA RAJGURU
Filing Date :NA 4)VAISHNAVI POHARKAR
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A system for securing embedded software codes having an industrial application from unauthorized access and use is disclosed. The
system for code security according to the present invention provides protection for embedded software codes implemented in an
automated application. According to the disclosed invention, the code is divided into plurality of segments and parts of the algorithm
are distributed and executed in multiple environments, thereby preventing hacking of the code.
No. of Pages : 12 No. of Claims : 7
20951
The Patent Office Journal 09/11/2012
17. (12) PATENT APPLICATION PUBLICATION (21) Application No.343/MUM/2012 A
(19) INDIA
(22) Date of filing of Application :06/02/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : 1-ARYL-3-(3,4,5-TRIMETHOXYPHENYL)-2-PROPEN-1-ONES AS ANTIMALARIALS
:A61P33/06, (71)Name of Applicant :
(51) International classification
A61K31/00 1)MAHAJAN, SUPRIYA SUDHAKAR
(31) Priority Document No :NA Address of Applicant :HIMGIRI-B-307, LOKHANDWALA
(32) Priority Date :NA COMPLEX, ANDHERI(WEST), MUMBAI-400 053,
(33) Name of priority country :NA Maharashtra India
(86) International Application No :NA 2)VAIDYA, SHALAKA SAINATH
Filing Date :NA (72)Name of Inventor :
(87) International Publication No :N/A 1)MAHAJAN, SUPRIYA SUDHAKAR
(61) Patent of Addition to Application Number :NA 2)VAIDYA, SHALAKA SAINATH
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention discloses l-aryl-3-(3,4,5-trimethoxyphenyl)-2-propen-i-one compounds of formula I as ideal candidates for
development of new antimalarials. These two compounds have shown good in vitro antimalarial activity against chloroquine-sensitive
and chloroquine-resistant strains of Plasmodium falciparum and chloroquine-sensitive strains of P. berghei. wherein, R and R selected
independently of each other from H, phenyl or methoxy.
No. of Pages : 26 No. of Claims : 10
20952
The Patent Office Journal 09/11/2012
18. (12) PATENT APPLICATION PUBLICATION (21) Application No.1316/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :02/04/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : METHOD AND SYSTEM FOR MULTIVIEW DISTRIBUTED VIDEO CODING WITH ADAPTIVE
SYNDROME BIT RATE CONTROL
(51) International classification :F24C (71)Name of Applicant :
(31) Priority Document No :NA 1)WIPRO LIMITED
(32) Priority Date :NA Address of Applicant :DODDAKANNELLI, SARJAPUR
(33) Name of priority country :NA ROAD, BANGALORE - 560 035 Karnataka India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)VIJAY KUMAR KODAVALLA
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A method and device for multiview distributed video coding with adaptive syndrome bit rate control are disclosed. In one
embodiment, multiple groups, including video frames coming from associated digital cameras, are formed. Further, video frames
coming from a predetermined number of the digital cameras are declared as key video frames. Furthermore, video frames coming
from remaining digital cameras are declared as non-key video frames. In addition, the key video frames are encoded to obtain encoded
bits. Moreover, the non-key video frames are encoded to obtain syndrome bits. Also, the encoded key video frames are decoded, to
obtain decoded bits and the encoded non-key video frames are decoded, to obtain decoded bits and CRC bits. Further, an optimal
number of syndrome bits in each non-key video frame are determined. Furthermore, the encoded bits and determined optimal number
of syndrome bits are sent to multiple receivers.
No. of Pages : 53 No. of Claims : 28
20953
The Patent Office Journal 09/11/2012
19. (12) PATENT APPLICATION PUBLICATION (21) Application No.1488/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :29/04/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : A PULP WOOD DEBARKING AND DELIMBING MACHINE
(51) International classification :B27L (71)Name of Applicant :
(31) Priority Document No :NA 1)HYPRO AB
(32) Priority Date :NA Address of Applicant :SMALATORP 882, 280 70
(33) Name of priority country :NA LONSBODA Sweden
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)TOMMY KARLSSON
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Disclosed is a pulp wood delimbing and debarking machine with sets of feeder wheels and cutting knives. The primary and secondary
feeder wheels have diagonally set bar patterns to create a rotating motion, while the bottom (tertiary) feeder wheel creates a straight
feeding motion that counteracts the rotation. The cutting knives clasp upon the wooden log to perform the shearing or debarking of the
pulp wood. The machine can be easily transported to the site of operation by mounting on tractor like vehicles and provides a less
labor intensive and more economical method of debarking.
No. of Pages : 13 No. of Claims : 9
20954
The Patent Office Journal 09/11/2012
20. (12) PATENT APPLICATION PUBLICATION (21) Application No.2195/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :31/05/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : SYSTEM AND METHOD FOR MOBILE INTERNET OFFLOADING IN A WIRELESS
COMMUNICATION NETWORK
(51) International classification :H04L (71)Name of Applicant :
(31) Priority Document No :NA 1)Wipro Limited
(32) Priority Date :NA Address of Applicant :Doddakannelli Sarjapur Road
(33) Name of priority country :NA Bangalore Karnataka India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)SAPTARSHI CHAUDHURI
(87) International Publication No : NA 2)SUBHODEEP SARKAR
(61) Patent of Addition to Application Number :NA 3)SOUMYA SHANKAR SARDAR
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A system and method for mobile Internet offloading in a wireless communication network are disclosed. In one embodiment a session
is established through an Internet offload gateway (IOGW) with a mobile operator network to establish a communication with a
mobile device. A packet coming from the mobile device is received by an intelligent policy manager (IPM) residing in the IOGW
during the session. If the received packet is a signaling packet offload rule flags are generated and operator defined offload policy
rules are then enabled. If the received packet is a data packet it is determined whether the operator defined offload policy rules match
with session information associated the data packet. If the operator defined offload policy rules match the data packet is offloaded to
the Internet. If the operator defined offload policy rules do not match the data packet is sent to a home gateway.
No. of Pages : 38 No. of Claims : 15
20955
The Patent Office Journal 09/11/2012
21. (12) PATENT APPLICATION PUBLICATION (21) Application No.1314/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :02/04/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : ARCHITECTURE FOR ENERGY MANAGEMENT OF MULTI CUSTOMER MULTI TIME ZONE
DISTRIBUTED FACILITIES
(51) International classification :G06Q (71)Name of Applicant :
(31) Priority Document No :NA 1)WIPRO LIMITED
(32) Priority Date :NA Address of Applicant :DODDAKANNELLI, SARJAPUR
(33) Name of priority country :NA ROAD, BANGALORE-560035 Karnataka India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)RAVI MEGHANI
(87) International Publication No : NA 2)ROHIT SRIVASTAVA
(61) Patent of Addition to Application Number :NA 3)SUBHASIS MANDAL
Filing Date :NA 4)SUDIPTA GHOSH
(62) Divisional to Application Number :NA 5)DR. ANURAG SRIVASTAVA
Filing Date :NA
(57) Abstract :
A system and method for energy management for multi customer multi time zone distributed facilities are disclosed. In one
embodiment, data associated with the energy management of the multi customer distributed facilities located in different time zones is
obtained based on associated energy models by a data acquisition/integration layer. Further, the obtained data for energy management
of the multi customer distributed facilities is transformed by a data management layer. Furthermore, control commands are generated
using the transformed data and associated one or more predefined thresholds and set-points by an energy transaction layer. Also,
energy of the multi customer distributed facilities is substantially simultaneously managed using the generated control commands by
the energy transaction layer.
No. of Pages : 82 No. of Claims : 28
20956
The Patent Office Journal 09/11/2012
22. (12) PATENT APPLICATION PUBLICATION (21) Application No.3139/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :14/09/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : STEPS IN BUSES AS PNEUMATIC LIFTER IN MOST EFFICIENT WAY
(71)Name of Applicant :
1)A. VIJAY RAJ
Address of Applicant :DEPARTMENT OF MECHANICAL
ENGINEERING KALASLINGAM UNIVERSITY ANAND
NAGAR KRISHNANKOIL SRIVILLIPUTHUR - 626190 Tamil
Nadu India
(51) International classification :F15B
2)V.VIGNESHWARAN
(31) Priority Document No :NA
3)S.VIGNESH RAJA
(32) Priority Date :NA
4)L.VIGNESH
(33) Name of priority country :NA
5)S.VIGNESHWARAN
(86) International Application No :NA
6)V.TAMILSELVAM
Filing Date :NA
7)SRIPRIYAN.K
(87) International Publication No : NA
8)HEAD OF THE MECHANICAL DEPARTMENT
(61) Patent of Addition to Application Number :NA
(72)Name of Inventor :
Filing Date :NA
1)A. VIJAY RAJ
(62) Divisional to Application Number :NA
2)V.VIGNESHWARAN
Filing Date :NA
3)S.VIGNESH RAJA
4)L.VIGNESH
5)S.VIGNESHWARAN
6)V.TAMIL SELVAM
7)SRIPRIYAN. K
8)HEAD OF THE MECHANICAL DEPARTMENT
(57) Abstract :
A bladder arrangement is setup under the steps of the vehicle. When normal people climb the steps the bladder compresses the air. The
compressed air is stored in a reservoir. Similarly compressor in the bus also further compresses the air in the cylinder to attain the
required pressure in air. Further this compressed air is used in actuating a piston which helps in rising the steps up and down for the
physically challenged people. It could also be used to raise heavy load in to the vehicle. The main aim is utilizing the pneumatic power
rather than hydraulic and electronic which are costly in most efficient way.
No. of Pages : 15 No. of Claims : 10
20957
The Patent Office Journal 09/11/2012
23. (12) PATENT APPLICATION PUBLICATION (21) Application No.2502/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :21/07/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : RUNNING OF VEHICLE THROUGH SPRING TENSION
(71)Name of Applicant :
1)A. MOTHILAL
Address of Applicant :DEPARTMENT OF MECHANICAL
ENGINEERING, KALASALINGAM UNIVERSITY ANAND
(51) International classification :B60H
NAGAR, KRISHNAN KOIL SRIVILLIPUTHUR 626190 Tamil
(31) Priority Document No :NA
Nadu India
(32) Priority Date :NA
2)J. VIGNESH
(33) Name of priority country :NA
3)C. VIGNESHWAR KIRAN BOSE
(86) International Application No :NA
4)K. VIJAYA RAGHUNATH
Filing Date :NA
5)L. NAGAPPAN
(87) International Publication No : NA
6)HEAD OF THE MECHANICAL DEPARTMENT
(61) Patent of Addition to Application Number :NA
(72)Name of Inventor :
Filing Date :NA
1)A. MOTHILAL
(62) Divisional to Application Number :NA
2)J. VIGNESH
Filing Date :NA
3)C. VIGNESHWAR KIRAN BOSE
4)K. VIJAYA RAGHUNATH
5)L. NAGAPPAN
6)HEAD OF THE MECHANICAL DEPARTMENT
(57) Abstract :
The Invention relates to the Field of Automobile. More specifically, can say as to vehicle moving through spring mechanism.
No. of Pages : 10 No. of Claims : 3
20958
The Patent Office Journal 09/11/2012
24. (12) PATENT APPLICATION PUBLICATION (21) Application No.3945/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :24/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : INTELLIGENT LOCATION IDENTIFICATION AND PASSENGER-ALERT SYSTEM IN
RAILWAYS USING GPS RECEIVER
(51) International classification :G08G1/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. ANISH NK
(32) Priority Date :NA Address of Applicant :18, LAL BAHADUR SASTRI ST.,
(33) Name of priority country :NA PONDICHERRY - 605 001 India
(86) International Application No :NA 2)DR. S. MOORTHI
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)MR. ANISH NK
(61) Patent of Addition to Application Number :NA 2)DR. S. MOORTHI
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Todays railway schedules are associated with a lot of unexpected delays and hence the estimated time of arrival cannot be predicted
with high accuracy. Hence, there arises the need for a passenger alert system which would alert the passenger when the train is within
a pre-specified distance to a mentioned destination. The aim of this work is to develop an intelligent real-time interactive information
system which senses the location of the train and calculates the distance of the train to the destination railway station which is taken as
input from the user. An alarm is activated once the distance is within a certain pre-specified limit, thereby functioning as a passenger-
alert system. The purpose of this alert system is to make sure that the passenger, travelling in the train, alights comfortably at the
intended destination. An embedded system has been designed interfacing a GPS receiver with a host Field Programmable Gate Array
(FPGA) board.
No. of Pages : 19 No. of Claims : 10
20959
The Patent Office Journal 09/11/2012
25. (12) PATENT APPLICATION PUBLICATION (21) Application No.3963/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :24/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : PAB REACTOR
(51) International classification :C02F3/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)DR. A.K.SABHAPATHY
(32) Priority Date :NA Address of Applicant :M/S. KRISHNA HOSPITAL
(33) Name of priority country :NA CHITTOOR ROAD, COCHIN - 11, ERNAKULAM DIST Kerala
(86) International Application No :NA India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)DR. A.K. SABHAPATHY
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The PAB reactor is designed to overcome the problems with the treatment of the bio-waste from the hospitals and for the
management, degradation and safe disposal of the placenta, anatomical materials, organs and body parts without bones. The reactor
incorporates the technique of the deep burial process along with improved engineering concepts for the effective disposal, of the bio-
waste from the hospitals. The reactor is well controlled for quick degradation of the anatomical waste material with a high degree of
protection to the environment and most suitable for all hospital atmospheres. The placenta anaerobic bio-reactor (PAB reactor) for the
management, degradation and safe disposal of anatomical body parts and organs with a high degree of protection to the environment
comprises an outer chamber (1) enclosing the reactor for digesting the anatomical body parts, a flush tank (2) connected to the inlet
pipe (4) for transporting the degradable waste material into the said digester enclosed by the said outer chamber (1), a perforated
discharge pipe (6) and an effluent overflow outlet pipe (7) connected to the said digester through the said chamber (1) at a pre-
determined distance from the bottom end for transporting the excess effluent and water from the said digester to the settling container,
a gas discharge pipe (9) connected to the digester through a perforated portion (11) of the pipe (14) at the diagonally opposite end to
the said effluent overflow outlet pipe (7) . for letting out the generated gas in the said PAB reactor and the said pipe (14) comprises
provisions (15) at the bottom end and effluent adding device (12) at the top end for enabling the bacterial culture to reach the said
reactor.
No. of Pages : 16 No. of Claims : 10
20960
The Patent Office Journal 09/11/2012
26. (12) PATENT APPLICATION PUBLICATION (21) Application No.3503/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :12/10/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : SCOOTER TYPE VEHICLE
(51) International classification :B60N (71)Name of Applicant :
(31) Priority Document No :NA 1)TVS MOTOR COMPANY LIMITED
(32) Priority Date :NA Address of Applicant :JAYALAKSHMI ESTATES NO.29
(33) Name of priority country :NA (OLD NO.8) HADDOWS ROAD, CHENNAI 600 006 Tamil
(86) International Application No :NA Nadu India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)R. SASIKUMAR
(61) Patent of Addition to Application Number :NA 2)VENKATA MANGARAJU K
Filing Date :NA 3)KRISHNABHATTA NAGARAJA
(62) Divisional to Application Number :NA 4)RENGARAJAN BABU
Filing Date :NA
(57) Abstract :
The present invention provides a motorcycle having a low framework structure body frame having a floor board portion; an automated
manual transmission equipped engine; a front panel disposed in front portion of body frame ; and an airflow regulating means on the
front panel at low floor board portion.
No. of Pages : 12 No. of Claims : 8
20961
The Patent Office Journal 09/11/2012
27. (12) PATENT APPLICATION PUBLICATION (21) Application No.3901/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :20/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : PROCESS FOR THE CONVERSION OF DYE MOLECULES INTO DYE GAS TO ERADICATE THE
DYE EFFLUENT POLLUTION
(51) International classification :b01j20/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)CHELLAPANDIAN KANNAN
(32) Priority Date :NA Address of Applicant :DR.C. KANNAN, M.SC., PH.D.,
(33) Name of priority country :NA ASSOCIATE PROFESSOR, DEPARTMENT OF CHEMISTRY,
(86) International Application No :NA MANONMANIAM SUNDARANAR UNIVERSITY,
Filing Date :NA TIRUNELVELI - 627 012 Tamil Nadu India
(87) International Publication No : NA (72)Name of Inventor :
(61) Patent of Addition to Application Number :NA 1)CHELLAPANDIAN KANNAN
Filing Date :NA 2)KUMARASAMY MUTHURAJA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The toxic and energetic dye molecules have been adsorbed on a mixture of adsorbent from dye effluent. The adsorbents are
environmentally and thermally stable. Equal amount of all adsorbents are mixed together to form the mixture of adsorbent. The
mixture of adsorbents composition will be altered with respect to the dye effluent nature. All the dye molecules present in the effluent
will adsorb on the mixture of adsorbents. The dye adsorbed adsorbents are dried and heated above 150°C for producing dye gas. The
chemisorbed dyes are cracked at this low temperature and produce the non-toxic dye gas products like hydrogen, methane, ethane,
ethylene, acetylene and nitrogen. Dye gas composition will vary with respect to the dye composition of the effluent. This dye gas is a
fuel gas. The toxic dye molecule become a non toxic fuel gas is the main application of this invention.
No. of Pages : 8 No. of Claims : 8
20962
The Patent Office Journal 09/11/2012
28. (12) PATENT APPLICATION PUBLICATION (21) Application No.3988/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :26/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : LAXMI - NARAYAN FLYING CAR
(51) International classification :B60S3/00 (71)Name of Applicant :
(31) Priority Document No :NA 1)MAHAJAN MAHESH DATTATRAY
(32) Priority Date :NA Address of Applicant :R.S. NO.112/1, DATT KAJU NAGAR,
(33) Name of priority country :NA MURGUD ROAD, NIPANI - 591 237 Karnataka India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)MAHAJAN MAHESH DATTATRAY
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Lax mi - Narayan Flying Car is based on Inlet and Outlet Air blower system Air blower fan motor is operate on electric motor or any
fuel engine Pulling Air from upper side holes and Pushing Air to bottom side from bottom side holes of the Car for Floating (Flying)
Car in the Air To move forward , the Air Pulled from front side holes and Push that Air to back side from back side holes of the Car
Flying Car can Turn easily Left and Right side when Flying This function is shown in figure (No.3) Flying Car can also Move to Left
side and Right side easily Flying Car can go backside by using reverse function of forward function Laxmi - Narayan Flying Car is
fully safety For safety purpose, The Car have 1 Netcap on the Inlet holes for avoiding any object comes with Pulling Air to inside
blower system 2 Window Glass on bottom side is looking for groundfloor area of the Car 3 Rubber Sole Coating on bottom side of the
Car is to protect from electric current and touching any object 4 Maximum weight is on the center of bottom side that helps to make
balance while Car Flying in the Air
No. of Pages : 22 No. of Claims : 12
20963
The Patent Office Journal 09/11/2012
29. (12) PATENT APPLICATION PUBLICATION (21) Application No.3913/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :15/11/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : PEDALING INFLUENCED SPUR GEAR MECHANISM FOR POWER GENERATION
(51) International classification :F03B (71)Name of Applicant :
(31) Priority Document No :NA 1)NATESAN KANNUSMAY RAMALINGAM
(32) Priority Date :NA Address of Applicant :NO. 37, ANNA STREET,
(33) Name of priority country :NA KANAGAM, TARAMANI, CHENNAI, POSTAL CODE:600
(86) International Application No :NA 113 Tamil Nadu India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)NATESAN KANNUSMAY RAMALINGAM
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Upon pedaling, as usual the crank(2) is driven and the same drives the Free Wheel(3) mounted over Rotating Shaft(4J. And as in case
of existing Bi-cycle technique, the rear wheel is mounted on the other end of the Rotating Shaft(4J. But here in fact I have replaced the
actual rear wheel with a Spur Gear(5). And this Spur Gear [5), is driven as the Free Wheel(3) rotates! here a Sprocket can also be used
instead of Free Wheel). Rotating Shaft is usually a rotating one, and as Rotating Shaft(4) rotates the Free Wheel(3) and Spur Gear(5)
are being driven in parallel where all these three make same number of rotation counts. Assume and refer the Figure. I so the Free
Wheel|3j and Spur Gear{5) are mounted on the Rotating Shaft(4). And obviously as Rotating Shaft(4J rotates the Spur Gear(5) also
rotates in parallel. And the Spur Gear ( S) is actually x-times bigger than the Free Wheel(3). The Free wheel(5) in turn rotates the
RPM multiplying Gear Box|6) connected to it. The Gear Box|6), transmits the multiplied rotations to the Elelctricity Generator(8),
where the Electricity Generator(8) and Gear Box(6) are connected through Pulleys(7). Hence the resultant RPM towards the
Electricity Generator|8) is very much higher and hence that results in excessive Electricity.
No. of Pages : 9 No. of Claims : 8
20964
The Patent Office Journal 09/11/2012
30. (12) PATENT APPLICATION PUBLICATION (21) Application No.3319/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :26/09/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : CYBOKNEE - ACTIVE KNEE BRACE WITH INTELLIGENT MOVEMENT DETECTION
:A61H, (71)Name of Applicant :
(51) International classification
A61F5/00 1)S.THIRU MURUGA VEERABAHU
(31) Priority Document No :NA Address of Applicant :PLOT NO 70, FIRST LAYOUT
(32) Priority Date :NA TEACHERS COLONY, KOLATHUR CHENNAI - 99 Tamil
(33) Name of priority country :NA Nadu India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)S.THIRU MURUGA VEERABAHU
(87) International Publication No : NA
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The method of controlling knee movement by active powered knee brace by sensing the users initial movement through motion
sensors, force sensors, angle detectors placed with the knee brace itself. This device is designed to serve the purpose of aiding in
rehabilitation, proving support to weak muscle thereby in mobility.
No. of Pages : 21 No. of Claims : 23
20965
The Patent Office Journal 09/11/2012
31. (12) PATENT APPLICATION PUBLICATION (21) Application No.4058/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :28/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : DROWNING VULNERABILITY ASSESSMENT AND INTELLIGENT LIFE GUARD COMMAND
CONTROL SYSTEM BASED ON LINEAR STATE SPACE MODELS USING REAL-TIME COMPUTATIONAL VIDEO
ANALYTICS
(51) International classification :G08B (71)Name of Applicant :
(31) Priority Document No :NA 1)VENKATRAMAN BALAJI
(32) Priority Date :NA Address of Applicant :FLAT D 101, ITTINA ABBY
(33) Name of priority country :NA APARTMENTS, L B SASTRY NAGAR, AIRPORT ROAD,
(86) International Application No :NA BANGALORE - 560 017 Karnataka India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)VENKATRAMAN BALAJI
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention provides system and method for drowning accident vulnerability assessment and intelligent life guard system
using linear state space models using real-time video computational analytics. The system includes high definition digital video
cameras and sensors with embedded video analytics modules deployed in and around the water body, above and below the water
surface in the water body. Video analytics modules and sensor modules compute drowning accident vulnerability risk level of
swimmers at various levels based on the captured high resolution video images for recognizing, identifying, measuring and computing
state space variables of swimmers dynamic state system and water body segment dynamic state system. A drowning accident alert is
triggered in case drowning risk level beyond a predetermined threshold value is detected. Continuously drowning vulnerably
assessment is performed and appropriate emergency response is applied with rescue management using intelligent life guard system to
provide emergency response at various scales.
No. of Pages : 80 No. of Claims : 29
20966
The Patent Office Journal 09/11/2012
32. (12) PATENT APPLICATION PUBLICATION (21) Application No.4165/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :05/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : WEATHER PROOF SOLAR REFLECTIVE INDEX ROOF TILES
(51) International classification :C04B (71)Name of Applicant :
(31) Priority Document No :NA 1)MR. VIJAY SHANKAR SHARMA
(32) Priority Date :NA Address of Applicant :IRIS HOUSE, 16 BUSINESS
(33) Name of priority country :NA CENTRE, NANGAL RAYA, NEW DELHI - 110 046 India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)MR. C.S. MURTHY
(87) International Publication No : NA 2)MR. ANIL AGARWAL
(61) Patent of Addition to Application Number :NA 3)MR. ALAKESHMAHATA
Filing Date :NA 4)MR. R. VINOTHAN
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A weather proof cool roof tile comprising: a) Plastic clay raw materials from about 70 to 80% and minerals from about 20 to 30% and
chemical compound of the tile is expressed by Si.sub20 from about 60 to 65% by weight, A1.sub2 0.sub3 from about 16 to 20% by
weight, Fe.sub2 0.sub3 from about 6 to 10% by weight, CaO from about 1 to 2% by weight, MgO from about 1 to2 % by weight,
Na.sub20 from about 0.5 to 1% by weight, K.sub20 from about 1.5 to 2.5% by weight and LOI is from about 6 to 8% by weight; b) A
specialopaque engobe with fine particles of white burning first grade burned ballclay, super white burning vitrofinecalcined clay from
EICC, china clay.a snow white burning special gradezir clay as a primary coating and c) A special opaque base glaze with Boron
silicate fine particles embedded with nano particles of zirconium and zinc oxide admixtures as a secondary coating.
No. of Pages : 24 No. of Claims : 24
20967
The Patent Office Journal 09/11/2012
33. (12) PATENT APPLICATION PUBLICATION (21) Application No.4051/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :28/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : REMOTE ASSET MANAGEMENT SYSTEM
(51) International classification :G06Q (71)Name of Applicant :
(31) Priority Document No :NA 1)SRIKRISHNA M.V.
(32) Priority Date :NA Address of Applicant :102, BRINDAVAN APTS, 117/3 LB
(33) Name of priority country :NA ROAD, ADAYAR, CHENNAI - 20 Tamil Nadu India
(86) International Application No :NA 2)L.N. RAJARAM
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)SRIKRISHNA M.V.
(61) Patent of Addition to Application Number :NA 2)L.N. RAJARAM
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention provides a remote asset management system through skilled/semi¬skilled personnel located at different
locations in the world to manage a plurality of the remote assets whether stationary or mobile by providing security and restricting
unauthorized access and misuse of the remote assets in real time specified operations.
No. of Pages : 24 No. of Claims : 9
20968
The Patent Office Journal 09/11/2012
34. (12) PATENT APPLICATION PUBLICATION (21) Application No.4134/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :04/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : GUST CHARGER - SELF POWER GENERATING MOBILE CHARGER
(51) International classification :H02J (71)Name of Applicant :
(31) Priority Document No :NA 1)DIVYA KRISHNAMOORTHY
(32) Priority Date :NA Address of Applicant :603, VTH CROSS STREET,
(33) Name of priority country :NA KALAIVANAR NAGAR, VANUR TK, VILLUPURAM - 605
(86) International Application No :NA 111 Tamil Nadu India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)DIVYA KRISHNAMOORTHY
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
Mobile chargers are commonly used to charge the mobile phones. We have lot of problems for charging the mobile phones when there
is a power cut and absence of mind to put charge for mobile phones. At that time we might be in situation to go out for any other
places with low battery which might be lead to switch off conditions for mobiles. In this time important or emergency
communications cannot be done. During traveling some vehicles are only provided with chargers. Whenever the battery is low in
mobiles during traveling, we depend only on these electrical source chargers. But in this Gust charger, we can generate the power to
charge the mobile phones without the external electrical source. The Gust charger is a device, used to charge the mobile phones with
the help of the wind energy. In this device, a fan is rotated by the force of wind. This fan in turn rotates the dynamo and the electrical
energy is produced. The obtained power is regulated using the PCB regulator. The power that is produced is sent to the mobile phones
using the charger pins. Multiple mobile phones can be charged using this gust charger. This device is very simple, compact and can be
easily carried from one place to another as like the existing external power source chargers.
No. of Pages : 8 No. of Claims : 10
20969
The Patent Office Journal 09/11/2012
35. (12) PATENT APPLICATION PUBLICATION (21) Application No.4049/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :28/09/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : NON-WOVEN FABRIC FILTER CARTRIDGE FOR WATER PURIFICATION SYSTEM AND
METHOD OF PREPARING THE SAME
:B32B, (71)Name of Applicant :
(51) International classification
B01D 1)EUREKA FORBES LIMITED
(31) Priority Document No :NA Address of Applicant :SCHEDULE NO.42P-3/C1,
(32) Priority Date :NA MUNESHWARA LAYOUT, HARALUKUNTE, KUDLU,
(33) Name of priority country :NA BANGALORE - 560 068 Karnataka India
(86) International Application No :NA (72)Name of Inventor :
Filing Date :NA 1)DR. RAMAN VENKATESH
(87) International Publication No : NA 2)MR. SURYAKANT GIDDE
(61) Patent of Addition to Application Number :NA
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
The present invention relates to a non-woven fabric filter cartridge for water purification system. More particularly, the present
invention relates to a non-woven fibrous media which may be utilized in drinking water purifiers that works on water supply fed
through plumbing or gravity. Further this invention also relates to non-woven fabric filter cartridge in which the variants include
multilayers of pleated or flat Nonwoven media in various shape, size and configuration. Further this invention also relates to a method
of preparing the non-woven fabric filter cartridge for water purification system.
No. of Pages : 25 No. of Claims : 10
20970
The Patent Office Journal 09/11/2012
36. (12) PATENT APPLICATION PUBLICATION (21) Application No.4196/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :09/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : A PROCESS FOR EXTRACTION OF NEUROSPORENE FROM A NOVEL PHOTOTROPHIC
BACTERIUM RHODOBACTER VIRIDS JA 737 AND UTILIZATION THEREOF
(71)Name of Applicant :
(51) International classification :C12N 1)EEDERA VEERA VENKATA RAMAPRASAD
(31) Priority Document No :NA Address of Applicant :RESEARCH SCHOLAR (CSIR-SRF),
(32) Priority Date :NA BACTERIAL DISCOVERY LABORATORY, CENTRE FOR
(33) Name of priority country :NA ENVIRONMENT, INSTITUTE OF SCIENCE AND
(86) International Application No :NA TECHNOLOGY, J.N.T. UNIVERSITY HYDERABAD,
Filing Date :NA KUKATPALLY, HYDERABAD - 500 085 Andhra Pradesh India
(87) International Publication No : NA 2)CHINTALAPATI SASIKALA
(61) Patent of Addition to Application Number :NA 3)CHINTALAPATI VENKATA RAMANA
Filing Date :NA (72)Name of Inventor :
(62) Divisional to Application Number :NA 1)EEDERA VEERA VENKATA RAMAPRASAD
Filing Date :NA 2)CHINTALAPATI SASIKALA
3)CHINTALAPATI VENKATA RAMANA
(57) Abstract :
Neurosporene is a tetraterpenoid found in plants, photosynthetic bacteria, fungi, and algae and serves as a precursor for more than six
hundred carotenoids. The yield of this pigment in above organisms is very low and sofar they are no methods were reported on
commercial production of neurosporene. However in the many field there is exists a very great demand for neurosporene in feed, food,
cosmetic and pharmaceutical sector. This invention related to cultivation of Rhodobacter viridis JA737 for production, extraction and
purification of neurosporene in large scale from a novel phototrophic bacterium, Rhodobacter viridis JA737 by simple steps with high
purity, which is considered to be suitable for mass production. The final product is a fine crystalline powder with low residual
solvents. The process provides pure neurosporene (98%). A sunscreen oil was prepared with neurosporene in coconut oil or vegetable
oil.
No. of Pages : 23 No. of Claims : 10
20971
The Patent Office Journal 09/11/2012
37. (12) PATENT APPLICATION PUBLICATION (21) Application No.4199/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :09/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : NUTRACEUTICAL COMPOSITION FOR REDUCING OBESITY
(51) International classification :A23L (71)Name of Applicant :
(31) Priority Document No :NA 1)CARE BIOLOGICALS PRIVATE LIMITED
(32) Priority Date :NA Address of Applicant :PLOT NO.2-22-4/5, FLAT NO.103,
(33) Name of priority country :NA SIKHARADRI TOWERS, VIVEKANANDANAGAR COLONY,
(86) International Application No :NA KUKATPALLY, HYDERABAD - 500 072 Andhra Pradesh India
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)BRAMHANADA SINGH GHAN SINGH
(61) Patent of Addition to Application Number :NA 2)NARSIMHA REDDY BOMMINENI
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A method of preparing a nutraceutical powdered beverage composition comprises a soy protein isolate with a milk/casein protein
isolate, adding predetermined amount of carbohydrates (fruit concentrate in dextrose, fructose, barley malt extract and/or other
carbohydrates.,), a predetermined amount of soluble dietary fiber and citri fiber to the admixture, incorporating a predetermined
amount of potent sweetener, multivitamins, minerals and a predetermined amount of natural fat burners along with the natural flavor
in the blender. The powdered beverage composition is then milled to obtain a homogenized powdered beverage composition and the
homogenized powdered beverage composition is dried at a predefined temperature under vacuum to obtain a dried powdered beverage
composition. The dried powdered beverage composition is further subjected to granular filtration to obtain the protein rich powdered
beverage.
No. of Pages : 18 No. of Claims : 10
20972
The Patent Office Journal 09/11/2012
38. (12) PATENT APPLICATION PUBLICATION (21) Application No.4326/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :17/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : SYSTEM AND METHOD FOR EVALUATING A VIDEO RESUME AND CONDUCTING A VIDEO
BASED INTERVIEW OF A JOB SEEKER
(51) International classification :G06Q (71)Name of Applicant :
(31) Priority Document No :NA 1)SURYANARAYANA GANNE
(32) Priority Date :NA Address of Applicant :1ST CROSS, 6TH LANE, SRI RAM
(33) Name of priority country :NA NAGAR, ELURU - 534 003 Andhra Pradesh India
(86) International Application No :NA 2)SAROJA AKKINENI
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)SAROJA AKKINENI
(61) Patent of Addition to Application Number :1614/CHE/2012 2)SURYANARAYANA GANNE
Filed on :24/04/2012
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
A system and method for evaluating a video resume and conducting a video based interview of a job seeker is disclosed. The system
further includes a centralized database for storing a video resume, a plurality of interview questions, a plurality of job requirements, a
recorded video of an interview. An authenticating server for enabling a secured login to the plurality of job seekers through a network
device. An automated interview management module and an automated interview reviewing module in communication with the
centralized database and the authenticating server configured to conduct and record the interview of the job seeker and enabling the
plurality of employers to evaluate the video based resume and to review the recorded video of an interview respectively.
No. of Pages : 28 No. of Claims : 22
20973
The Patent Office Journal 09/11/2012
39. (12) PATENT APPLICATION PUBLICATION (21) Application No.433/CHE/2011 A
(19) INDIA
(22) Date of filing of Application :15/02/2011 (43) Publication Date : 09/11/2012
(54) Title of the invention : DISCOVERY OF ECO FRIENDLY BIO-DEGRADABLE PAPER CUP BLANKS & PAPER CUPS
COATED WITH ECO CLASSICS 60 (M2960 ETHYLENE ACRYLIC) WHICH IS A WATER BASE FOOD GRADE COATING
(51) International classification :B31B (71)Name of Applicant :
(31) Priority Document No :NA 1)CHANDRAGANTI SUBBA RAO
(32) Priority Date :NA Address of Applicant :25-F, RANJITH ROAD,
(33) Name of priority country :NA KOTTURPURAM, CHENNAI - 600 085 Tamil Nadu India
(86) International Application No :NA 2)HAMSINI SUBBA RAO
Filing Date :NA (72)Name of Inventor :
(87) International Publication No : NA 1)CH.SUBBA RAO
(61) Patent of Addition to Application Number :NA 2)HAMSINI SUBBA RAO
Filing Date :NA
(62) Divisional to Application Number :NA
Filing Date :NA
(57) Abstract :
We claim that Eco Classics 60 (M 2960 Ethylene Acrylic) is our discovery to obtain an Eco friendly Bio degradable paper cup when
coated.
No. of Pages : 5 No. of Claims : 2
20974
The Patent Office Journal 09/11/2012
40. (12) PATENT APPLICATION PUBLICATION (21) Application No.4158/CHE/2012 A
(19) INDIA
(22) Date of filing of Application :05/10/2012 (43) Publication Date : 09/11/2012
(54) Title of the invention : SMART COCONUT PLUCKING MACHINE
(71)Name of Applicant :
1)R.I. VIGNESH
(51) International classification :A23N Address of Applicant :KS-01, NIRMAL BLOCK, AGRINI
(31) Priority Document No :NA APPARTMENTS, ANDALPURAM, MADURAI - 625 003
(32) Priority Date :NA Tamil Nadu India
(33) Name of priority country :NA 2)S. VIGNESH RAJA
(86) International Application No :NA 3)M. MUTHURAJESH
Filing Date :NA 4)C. KARTHIK
(87) International Publication No : NA 5)T. MANOJ
(61) Patent of Addition to Application Number :NA (72)Name of Inventor :
Filing Date :NA 1)R.I. VIGNESH
(62) Divisional to Application Number :NA 2)S. VIGNESH RAJA
Filing Date :NA 3)M. MUTHURAJESH
4)C. KARTHIK
5)T. MANOJ
(57) Abstract :
I claim, the usage of frustum rollers may be more efficient and I may have a consideration of changing the shape of the rollers in
future. The shape rollers may be changed as per the requirements.
No. of Pages : 12 No. of Claims : 5
20975
The Patent Office Journal 09/11/2012