Comparison Trunks V3[1]
- 1. Competitor Comparison | Fiber Trunks
All preterminated solutions are not created equal... CABLExpress® means quality and performance
3mm legs on MTP for
increased bend radius
and better cable management Single furcation point
for each breakout
USA made
Up to
250% better
2/3 less cable tray
insertion loss
fill rate and 1/5
vs. Industry
weight vs. Industry
standard
standard trunks
MTP vs MPO
Up to generic connectors CABLExpress® Skinny Trunk™
300% better
Precision crimping pull
insertion loss
tested to greater than 25 lbs.
vs. Industry
standard
Double furcation points for
single end adds loss and
Our test standards vs.
additional point of failure Typically industry standards
manufactured
offshore
Industry Standard Our Typical
LC .5 .2
MTP .75 .25
Insertion loss measured with LED overfilled launch
for most accurate test results.
Generic MPO
connectors
Competitor Fiber Trunk Improper crimping allows
Improper crimping causes easy separation from kevlar For all your data center needs call us @
easy connector pull off strength member 800.913.9465 or email cables@cablexpress.com
CXtec is the owner of the trademarks/service marks CABLExpress® © 2009 CXtec. All rights reserved. All trademarks are property of their respective owners.