I gave this presentation to the NASA space life science research community regarding the modeling and simulation tools the Digital Astronaut Project is developing to inform research regarding the preservation of musculoskeletal and visual system health of astronauts.
Repurposing LNG terminals for Hydrogen Ammonia: Feasibility and Cost Saving
The Digital Astronaut Project: Applying computational modeling and simulation to inform space life science research
1. The Digital Astronaut Project (DAP)
Applying computational models and
simulations to inform life science research
Lealem Mulugeta
DAP Project Scientist
mulugeta@dsls.usra.edu
lealem.mulugeta@nasa.gov
USRA DSLS Brown Bag Lunch Seminar - April 19th, 2012
2. Acknowledgments
Dr. Jean Sibonga, PhD Christian Otto, MD
HACD Bone Discipline Lead VIIP Project Scientist
Marlei Walton, PhD
IMM Project Scientist
2
3. Overview
• Goals of the Digital Astronaut Project
• Processes DAP follows to accomplish its goals
• The modeling and simulation tools currently under
development
• Video demonstration of the ARED and exercise modules
• Our recent achievements
3
4. Introduction
• Mars and NEO missions will expose astronaut to extended
durations of reduced-gravity, isolation and higher radiation
• These new operation conditions pose health risks that are
not well understood and perhaps unanticipated
• Advanced computational simulation environments can
beneficially augment research to predict, assess and
mitigate potential hazards to astronaut health
• The Digital Astronaut Project (DAP) strives to achieve this
goal
4
6. How Models Can be Applied to Enhance
Life Science Research
6
7. Current Focus Areas
1. Exercise countermeasures modeling and simulation
– Advanced Resistive Exercise Device (ARED)
– Biomechanics of exercise
– Bone adaptation
– Muscle adaptation
– Advanced Exercise Concept Devices
2. Risk of bone fracture
– Bone adaptation
– Biomechanics of post-flight activities for bone load predictions
3. Visual Impairment and Intracranial Pressure (VIIP)
– Preliminary stages
7
11. Exercise Countermeasures Modeling
Targeted HRP risk knowledge gaps:
B15: (a) What exercise protocols are necessary to maintain skeletal health? And
(b) Can exercise hardware be designed to provide these?
M7: Can the current in-flight performance be maintained with reduced exercise
volume?
M8: What is the minimum exercise regimen needed to maintain fitness levels
for tasks?
M9: What is the minimum set of exercise hardware needed to maintain those
(M8) fitness levels?
M24: What is the time course of changes in muscle protein turnover, muscle
mass, and function during long-term spaceflight?
11
12. ARED Hardware Model
• High fidelity dynamics
model of ARED/VIS
developed in MSC Adams™
– Mass and inertial properties
– Friction forces
– Gas laws
• Currently allows for
simulation of bar exercises
only
Modeler: Brad Humphreys 12
17. ARED Exercise Models
• Developed with LifeMOD™ using motion capture data
acquired on the ARED ground unit at JSC
Dead lift Normal Squat Single-leg squat
Muscle Module
Joint Module
Modelers: Nate Newby and Erin Caldwell 17
24. Muscle Adaptation Model
• Conceptual phase
• Enhance the fidelity of muscle representation
in the LifeMOD biomechanics models in terms
of space flight changes
• Gain insight on muscle adaptation factors:
– Neuromuscular drive and activation
– Muscle atrophy and fiber morphology
– Blood flow and intramuscular pressure
– Metabolic processes
– Fatigue
Modeler: Beth Lewandowski, PhD 24
25. Bone Adaptation Model
• Predicted muscle force from biomechanics
models is an input to the bone adaptation
model
• Bone adaptation model factors :
– Cortical bone tissue rate of change
– Bone fluid calcium rate of change
– Biochemical equations
– Mechanical stimulus
– Cellular dynamics
Modeler: Jim Pennline, PhD 25
26. Risk of Bone Fracture
Targeted HRP risk knowledge gaps:
B15: (a) What exercise protocols are necessary to maintain skeletal
health?
B1: (a) Is there an increased lifetime risk of fragility
fractures/osteoporosis in astronauts?
(b) Is bone strength completely recovered post-flight, and does
BMD reflect it?
(c) What are the risk factors for poor recovery of BMD/bone
strength
B30: What are the loads applied to bone in-flight and during EVA
activities and do they increase fracture risk in light of expected
bone loss?
Modeler: Jim Pennline, PhD 26
27. Risk of Bone Fracture
• Implement biomechanical modules to
predict the forces experienced at
specific bone sites during various
activities (not exercise)
• Enhance bone adaptation module to
(Hewett et al., 2008)
determine changes in the macro- and
microstructure of bone during long-
duration spaceflight and implications on
long-term bone health risks
Modeler: Jim Pennline, PhD 27
29. Advanced Exercise Devices Modeling
• Objectives:
1. Gain insight into the efficacy of AEC devices for exercise
countermeasures
2. Provide timely input for design, development, and
refinement of AEC devices
3. Help reduce the time and cost to develop the exercise
devices
4. Help reduce the time and cost to clinically test new exercise
devices
29
30. Visual Impairment and Intracranial Pressure (VIIP)
Intracranial Papilledema
Pressure
Intracranial Changes in visual acuity
Compliance Primary focus:
• biomechanical responses to the of
Intracranial the intracranial and ocular structure
Hemodynamics
while microgravity environment that
may affect visual acuity
Intra-ocular Model types under consideration:
Pressure • Lumped parameter models of the
Cerebrospinal intracranial and spinal compartments
Fluid Flow • Finite element model of the eye
• Computational fluid dynamics of the
intracranial and spinal space
(Adapted from Google Body –
http://bodybrowser.googlelabs.com)
• High fidelity tissue models to capture
nonlinear/viscoelastic properties
30
32. VIIP Targeted Gaps
• VIIP6: How do changes in vascular compliance/ pressures
influence intraocular pressure or intracranial pressure?
• Gap VIIP2: Does exposure to microgravity cause changes in
visual acuity, intraocular pressure and/or intracranial
pressure? Are the effects related to mission duration?
• Gap VIIP4: Are changes in visual acuity related to changes
in:
1) deformation of the optic nerve head;
2) chronic choroidal engorgement;
3) elevated intraocular pressure; and/or
4) intracranial pressure?
32
34. ARED Model used for Flywheel
Preventative Maintenance
• The ARED flywheels were disengaged due to ground
evidence that suggested the flywheel set screws may
back out of their engagement to cause damage to the
ARED
• Substantiation was requested from the ISS Program
Office on whether or not crew time should be allocated
to re-torque the set-screws as a short term fix to buy
enough time to investigate a long-term fix
• The exercise lab at JSC leveraged the Beta ARED
hardware model to partially substantiate the benefit of
having the inertial wheels engaged during exercise
Analysts: Nate Newby, Erin Caldwell and Brad Humphreys 34
35. ARED Model used for Flywheel
Preventative Maintenance
Analysts: Nate Newby, Erin Caldwell and Brad Humphreys 35
36. ARED Model used for Exercise Envelope Analysis
Analysts: Nate Newby and Erin Caldwell 36
37. ARED Model used for Exercise Envelope Analysis
• The ISS Program Office requested an analysis to assess if the
ISS operational envelope for ARED exercise to assess if the
envelope is being exceeded during exercise due to excess
stowage in the exercise area
• DAP modelers used the dead lift/ARED model within the
currently assigned ISS operational envelope for ARED exercise
to assess if the envelope is being exceeded during exercise
• DAP modelers developed a model of a 95th % male
performing a bench press on the ARED to perform the same
analysis
• The results were shared with the ISS Program Office to
determine the necessary operational envelope
Analysts: Nate Newby and Erin Caldwell 37
38. Contributions to the Field for V&V of
Biomedical Models and Simulations
• The FDA is leveraging a lot of the methodologies DAP
and IMM have laid out for verification, validation and
credibility assessment of M&S
• Collaboration talks are currently underway with FDA
• The NIH Multiscale Modeling Working group meeting
in October 2012 is going to have a large emphasis on
V&V and credibility assent
38
39. Synapses
• DAP has established a systematic process to closely
work with researchers to leverage computational
models inform HRP risk knowledge gaps
• Current areas of focus are exercise countermeasures,
risk of bone fracture and VIIP
• Substantial strides have been made in the past year in
biomechanical and exercise device modeling
• Making notable contributions to the field in verification
and validation, and credibility assessment of
computational models
39
40. “All models are wrong, but some are useful.”
- George E. P. Box
41. The DAP Team
Beth Lewandowski, PhD – Muscle Model
Bill Thompson, MS – Squat Integration
Brad Humphreys – Exercise Device Modeling
Chris Sheehan – Exercise Device Modeling Task Lead
Chris Werner – ARED V&V
DeVon Griffin, PhD - Project Manager
Emily Nelson, PhD – VIIP M&S
Erin Caldwell , MS - Biomechanics Modeling and Dead Lift Integration
Jennifer Stein – Exercise Device V&V Processes
Jim Pennline, PhD – Bone Modeling Lead
Jerry Myers, PhD – M&S Advisor
Lealem Mulugeta, MS - Project Scientist
Nate Newby, MS – Biomechanics Modeling and Dead Lift integration
41
43. DAP Mission Statement
The DAP implements well-vetted computational models
to predict and assess spaceflight health and performance
risks, and enhance countermeasure development. The
DAP aims to accomplish these goals by:
1. Partnering with subject matter experts to address Human
Research Program (HRP) knowledge gaps and countermeasure
development decisions
2. Modeling, simulating, and analyzing the physiologic responses
to exposure to reduced gravity and analog environments
3. Providing timely input to mission architecture and operations
decisions in areas where clinical data are lacking
43
44. NASA Standard 7009
A comprehensive set of requirements and
processes for developing and applying
models and simulations, while ensuring
appropriate verification, validation and
credibility of the M&S results
44
45. NASA-STD-7009 Background
• NASA M&S that impact on the crew or mission will be
required to follow NASA-STD-7009, including biological
models
• It was initially developed for engineering systems
• DAP and Integrated Medical Model (IMM) have
adapted NASA-STD-7009 for biomedical models for
clinical and research applications
• Given the highly comprehensive nature of the
standard, DAP and IMM are working to establish a
systematic process to apply it to vet M&S
45