2.  Casting is the most important part of fly fishing. Casting determine if you present the fly on the water
properly. Presenting the fly means how you cast the fly out. Different flies have different was of being
presented.
 Three basic fly fishing casts are the overhead cast, Roll cast, and the reach cast.
 Roll Cast-http://youtu.be/AwBZbnb4cpY
 Overhead Cast-http://youtu.be/0yIzZP0UGdw
 Reach Cast- http://youtu.be/J0tdJXq9pho
 The motion of fly fishing is from 2 o'clock to 10 o’clock on a clock
 This motion is when you draw back the fly rod and then shoot it forward.
 This is were the motion 10 o’clock to 2 o’clock comes in, because you shoot
 Your rod back to 10 o’clock then shoot it to 2 o’clock then repeat. You wait a
 Few seconds for your fly line to follow the motion so it wont cause a snapping
 And whipping motion.

3.  The most important part of your gear is your fly rod and reel if you do not have them u cannot fly fish. The other essential gear are
waders and boots. Waders are like a wet suit that keep you dry and warm. Having waders is a bonus if you fly fish. Waders
are traditionally made from vulcanised rubber but available in more modern PVC, neoprene and Gore-tex variants. You can buy
different types of waders depending on were you like in the world. If you live in Calgary Alberta and you want to fish in the winter when
the lakes and streams are freezing over you can buy waders that can handle below -20 degree cold. You have the option for waders to
come with built in wading boots or you can get them without.
 A decent price for waders is 90-100 dollars but can range from 40-600 dollars. The problem with cheaper waders with or with out built
in boots are that the seems are week and may tear easily.
 Having the right boots is important to. There are different types of boots. For example felt bottom boots improve your footing on a
slippery stream or river so you don’t take a swim, but rubber soled will last longer. You can buy studs for your boots to screw in the
bottom for more grip and durability when wading in fast moving water. A Belly boat or pontoon boat is optional if you fly fish
on a lake. In that case you will need flippers for easy transportation so you can move a lot quicker or you can just
kick with you boots.
Felt soled
1. Neoprene
2. Gore Tex
 3. PVC

4.  A thin and very flexible fishing rod that was created to cast artificial fly. Fly are made of yew, green hart, and later split
bamboo, but todays fly rods can be made of carbon fiber and graphite and fiberglass. Bamboo rods are considered the
most expensive rods and the most beautiful. Fly rods are made to not have to use a weighted lure but instead use the
weight of the fly line to cast out the smallest and lightest flies.
 The size of your rod depends on the size of the fish you want to catch. Even the water and the wind are factors to choosing
a fly rod. There are different types of fly rods. Which include Fast action/tip flex Medium action/mid flex Slow action/full
flex.
 The Action means how flexible the fly rod is. The Faster the action the stiffer the rod is. Tip flex, mid flex and full flex
refers to as were the bend of the rod is when you are fighting a fish or casting.
 Their are different types of fly fishing rods.
 For a quiet lake you would want a rod with slow action so you can
see your bite easier and because the water is not rough it wont show
Cause your rod to bend because of the current.
 For a River or the ocean you would want moderate action or fast action
The reasons for this is the fish in Rivers and Oceans are usually bigger
And the current in them are a lot stronger.
reels have the same purpose to be able to cast out and catch a fish. The bigger the reel usually means more fly
Reel usually means more Line and a stronger leader. There are reels made for fishing small little trout and
Their are reels made for fishing king salmon. For fishing big fish some reels have a
Break to slow down the fish while t takes out line while others reels you just need to hold the line for an let it out slowly.
Some reels are meant to handle saltwater and wont corrode, while a freshwater reel would.

5.  The fly line is the most important part but you would least expect it.
 There are Different types of fly fishing for different types of fishing .
 There are Three types of fly lines. Level, Double taper,
 Weight forward. Some lines are meant for casting while others are meant for
Delicate presentation of a fly.
 Level
 The level Fly lines are the most basic fly line you can get.
being the cheapest of the fly lines. They are uncommon
because of their poor performance.
Double Taper
 Double taper have been popular fly line for many years
The main reason for this is for the delicate presentation .
For fishing on a small stream or creek that are
No wider or longer than 30ft will increase the life of the line a great deal.
Weight forward fly line is truly the most common type of
Fly line used today, the point of weight forward line is to shoot the fly forward for a longer cast. The first 1/3 of the line is the
thickest and the last is 2/3 to minimize friction on the fly rod guides.

6.  To sum up the art of fly fishing some people enjoy tying fly's more than they like fly fishing. Fly tying takes time and practice,
you can create your own custom fly's or you can watch a hatch and mimic different sorts of insects. Fly tying involves skill and
patients. To Fly tie you need special tools, Threads, materials and fly head cement. There are different types of flies, 4 Basic
kinds of fly’s are Dry Flies, Wet flies, Nymphs and streamers.
Royal Coachman- Dry Fly Leadwing Coachman- Wet Fly Prince nymph-nymph Mickey Finn- Streamer
The main tools you need to fly tie are. A vice and the main tying tools which include scissors for cutting material, a needle with a
handle that will not roll of an table . A bobbin for tying on thread, and a whip finisher5) The needle is used for clearing out the eye of
the hook after using the head cement on the fly's, bobbins to hold the spools of thread.2) Hackle plier are because it holds the
feathers or hair closest to the eye of the hook. A whip finisher allows you to make very neat and uniform heads by exact placement
and spacing of the tying thread.
My fly tying video

7.  Fly fishing was first invented to catch different types of trout and salmon, but is widely used in catch a different variety of
fish which include pike, bass, panfish, grayling and carp. Fly Fishing is also used to catch fish from the ocean, which include
redfish, snook, tarpon, bonefish and striped bass. Due to todays technologies there are stronger and better performance
rods which have been created to catch wahoo, tuna, marlin and sharks on flies
 Types of flies that are used to catch these types of fish are made to look like fish and squid. Any fish can be caught on a fly
but the key point Is that the fly has to replicate their food source.

 Carp
Rainbow trout Bass
Grayling
P