1. iPhone Repairs - Problem With the Home Button?
One of the biggest giants of the technological industry tried its hand to come up with a really
nice mobile with ultra-cool features, which has left many mobile users in awe. The flourish and
the excitement of iPhone series mobiles cannot be expressed in mere words. The fan base of
Apple is very huge and the demand for the iPhone is unending. iPhone is considered to pull the
trigger for the new age mobiles, where touch screen technology has caught up with every mobile
user and cell phone company. However, the most irksome part arrives when a high end phone,
like iPhone gets stuck or starts to experience technical problems; after all, it is just a machine!
iphone repair Austin are not uncommon and definitely not unheard of. After considerable
usage, every phone hits a point, where it starts to experience minor or major issues. One such
annoying problem, which has been observed with quite a few iPhone pieces, is the unresponsive
home button. The touch screen, reset or power button at the top and the home button are the
physical input modes of the iPhone. Whenever a user needs to operate the iPhone, he/she will
have to use that circular home button, just below the screen. If the button turns out to be a dud,
then it is evident that the user has just lost the ability to operate the iPhone. Nevertheless, it does
not mean that the mobile is dead and one needs to trash the iPhone as soon as the home button
gets stuck. This type of iPhone repair needs a little analysis and a good knowledge of mobiles as
such.
Firstly, check for any dust or debris that might have accumulated below the home button. If the
phone is put outside and with no cover it is easy for the buttons to catch all the worldly particles
within the minute openings under the button. This matter can be resolved by simply using a tooth
brush or a fine pin. Even blowers can come handy in case of a blockage caused by debris.
If the button still remains unresponsive, move to the second inspection stage, which is to look for
any water penetration. This is a tricky situation and if the phone has been accidentally
experienced a water fiasco, then the primary iPhone repair step would be to wrap tissues and
towels to dry out the surface and then let the phone be placed in sunlight. If the key does not
respond even after a while, then as an extreme step it could be placed in an oven at 120 degrees.
But, this is step is to be used as a last resort only, that too when the user is pretty sure that the
problem is related to seepage of water.

2. In case, the problem is not related to either of these, with no further ado, visit the nearest iPhone
repair shop. They will diagnose the phone in every way (software and hardware concerns) and
can fix the home button in a matter of hours.