27 New Honeywell C7005 and Q179 Gas Pilot Burner Assemblies from DtiCorp.com Honeywell Gas Pilot Burner Assemblies include a flame rod to prove the pilot flame. The assemblies are used with a suitable flame safeguard control on industrial or commercial gas burners or oil burners with gas pilots. Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is introducing 27 New Honeywell C7005 and Q179 Gas Pilot Burner Assemblies. Honeywell Gas Pilot Burner Assemblies include a flame rod to prove the pilot flame. The assemblies are used with a suitable flame safeguard control on industrial or commercial gas burners or oil burners with gas pilots. Features: - Used with Honeywell controls using the flame rectification principle. - C7005A is for continuous pilot applications. - It includes an insulated flame rod, properly positioned relative to the flame retention type nozzle. C7005B is similar to C7005A, but includes an ignition electrode suitable for automatic, electric-spark ignition, gas pilot applications. - Individually mounted flame rod and ignition electrode in ceramic insulators allow the head assembly to fit inside a 3-inch pipe. - Stainless steel fins on the flame retention type pilot head provide the correct ratio of flame rod area to ground area for maximum flame signal, and are beneficial in stabilizing the pilot flame. - Pilot flame retention nozzle and mixing tube are threaded internally, 1/2-14 NPT and 3/8-18 NPT, respectively, and can be assembled with standard pipe fittings. - Pilot can be installed in vertical, horizontal, or inclined position. - Rajah connectors facilitate electrical connections. Product Specifications: - Models: C7005A Gas Pilot and Flame Rod Assembly for continuous pilot applications; includes flame rod only. C7005B Gas Pilot and Flame Rod Assembly for automatic pilot applications; includes flame rod and ignition electrode. - Pilot Head: Flame retention type with stainless steel bomb type fins. Threaded onto 1/2 x 6 inch (152 mm) pipe nipple with 1/2-14 NPT external threads. - Type of Gas: Models available for use with natural and propane gases. - Insulator Brackets: Adjustable to change location of flame rod or ignition electrode; lock securely using setscrew. - Mixing Tube: Inspirating (Venturi type) with primary air adjustment. Approximately 4-9/16 inches (116 mm) long, 1-3/4 inches (44.5 mm) diameter. Inlet tapping 1/4-18 NPT; outlet tapping 3/8-18 NPT. - Mounting: Vertical, horizontal, or inclined. - Dimensions: Overall Height 13-1/2 inches (343 mm); width can be adjusted to pass through a 3-inch pipe. Pilot Head Length 4-7/16 inches (113 mm), diameter 1-5/8 inches (41.3 mm). Spark Gap (C7005B only) 1/8 to 3/16 inch (3.2 to 4.8 mm). - The C7005B Gas Pilot and Flame Rod Assembly includes an ignition electrode and a flame rod. The operation of these two electrodes in a simple electrically-operated, gas pilot installation. - At the beginning of the starting cycle, a high voltage from the secondary winding of the ignition transformer is applied to the ignition electrode. A spark jumps across the outlet of the pilot burner. The pilot gas valve is either automatically or manually opened, and the spark ignites the gas. - When the ignition transformer is energized, ac voltage is applied to the flame rod through a flame safeguard control. When the pilot flame appears, this ac voltage is changed to dc voltage through a rectifying action. This dc voltage then operates a relay, opening the valve to the main burner (or permitting it to be manually opened). In the event of flame failure, flame rectification stops, the gas valves are deenergized, the valves close, and the system shuts down. - Approvals: Underwriters Laboratories Inc. Listed: File No. MP268. Canadian Standards Association Certified: C7005 only Master file LR-95329-1. Industrial Risk Insurers acceptable. Models available:

1. 27 New Honeywell C7005 and Q179 Gas Pilot
Burner Assemblies from DtiCorp.com
Honeywell Gas Pilot Burner Assemblies include a flame rod to prove the pilot flame. The
assemblies are used with a suitable flame safeguard control on industrial or commercial
gas burners or oil burners with gas pilots.
Fort Lauderdale, FL - Popular Honeywell online retailer DtiCorp.com (http://www.DtiCorp.com) is
introducing 27 New Honeywell C7005 and Q179 Gas Pilot Burner Assemblies. Honeywell Gas Pilot
Burner Assemblies include a flame rod to prove the pilot flame. The assemblies are used with a suitable
flame safeguard control on industrial or commercial gas burners or oil burners with gas pilots.
Features:
- Used with Honeywell controls using the flame rectification principle.
- C7005A is for continuous pilot applications.
- It includes an insulated flame rod, properly positioned relative to the flame retention type nozzle.
C7005B is similar to C7005A, but includes an ignition electrode suitable for automatic, electric-spark
ignition, gas pilot applications.
- Individually mounted flame rod and ignition electrode in ceramic insulators allow the head assembly to
fit inside a 3-inch pipe.
- Stainless steel fins on the flame retention type pilot head provide the correct ratio of flame rod area to
ground area for maximum flame signal, and are beneficial in stabilizing the pilot flame.
- Pilot flame retention nozzle and mixing tube are threaded internally, 1/2-14 NPT and 3/8-18 NPT,
respectively, and can be assembled with standard pipe fittings.
- Pilot can be installed in vertical, horizontal, or inclined position.
- Rajah connectors facilitate electrical connections.
Product Specifications:
- Models:

2. C7005A Gas Pilot and Flame Rod Assembly for continuous pilot applications; includes flame rod only.
C7005B Gas Pilot and Flame Rod Assembly for automatic pilot applications; includes flame rod and
ignition electrode.
- Pilot Head:
Flame retention type with stainless steel bomb type fins. Threaded onto 1/2 x 6 inch (152 mm) pipe nipple
with 1/2-14 NPT external threads.
- Type of Gas:
Models available for use with natural and propane gases.
- Insulator Brackets:
Adjustable to change location of flame rod or ignition electrode; lock securely using setscrew.
- Mixing Tube:
Inspirating (Venturi type) with primary air adjustment. Approximately 4-9/16 inches (116 mm) long,
1-3/4 inches (44.5 mm) diameter. Inlet tapping 1/4-18 NPT; outlet tapping 3/8-18 NPT.
- Mounting:
Vertical, horizontal, or inclined.
- Dimensions:
Overall Height 13-1/2 inches (343 mm); width can be adjusted to pass through a 3-inch pipe.
Pilot Head Length 4-7/16 inches (113 mm), diameter 1-5/8 inches (41.3 mm). Spark Gap (C7005B only)
1/8 to 3/16 inch (3.2 to 4.8 mm).
- The C7005B Gas Pilot and Flame Rod Assembly includes an ignition electrode and a flame rod. The
operation of these two electrodes in a simple electrically-operated, gas pilot installation.
- At the beginning of the starting cycle, a high voltage from the secondary winding of the ignition
transformer is applied to the ignition electrode. A spark jumps across the outlet of the pilot burner. The
pilot gas valve is either automatically or manually opened, and the spark ignites the gas.
- When the ignition transformer is energized, ac voltage is applied to the flame rod through a flame
safeguard control. When the pilot flame appears, this ac voltage is changed to dc voltage through a
rectifying action. This dc voltage then operates a relay, opening the valve to the main burner (or
permitting it to be manually opened). In the event of flame failure, flame rectification stops, the gas
valves are deenergized, the valves close, and the system shuts down.
- Approvals:
Underwriters Laboratories Inc. Listed: File No. MP268.
Canadian Standards Association Certified: C7005 only
Master file LR-95329-1.
Industrial Risk Insurers acceptable.
Models available:
1. C7005A1037 Flame Rectifier Pilot with a 0.052 in. dia. Orifice
2. C7005B1035 Flame Rectifier Pilot with a 0.052 in. dia. Orifice

3. 3. C7005B1050 Flame Rectifier Pilot with a 0.028 in. dia. Orifice
4. Q179A1001 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style
5. Q179A1035 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree right hand port and tip
style
6. Q179A1050 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and T tip style
7. Q179A1076 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and 45 degree Y port and tip style
8. Q179A1092 Flame Rectifier Pilot with a 0.028 in. dia. Orifice and 45 degree T port and tip style
9. Q179A1118 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree left hand port and tip style
10. Q179A1126 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style
11. Q179A1183 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and I tip style
12. Q179B1042 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and T tip style
13. Q179B1109 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree left hand port and tip
style
14. Q179B1117 Flame Rectifier Pilot with a 0.025 in. dia. Orifice and 45 degree I port and tip style
15. Q179C1009 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target
Mount and D tip style
16. Q179C1025 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Rear Target
Mount and L tip style
17. Q179C1033 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Left Side Target
Mount and D tip style
18. Q179C1041 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Right Side Target
Mount and D tip style
19. Q179C1058 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Left Side Target
Mount and L tip style
20. Q179C1066 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Right Side
Target Mount and K tip style
21. Q179C1090 Miniature Flame Rectifier Pilot with 0.016 in. dia. Orifice, Dual Wing Rear Target
Mount and D tip style
22. Q179C1108 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target
Mount and D tip style

4. 23. Q179D1008 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Rear Target
Mount and D tip style
24. Q179D1016 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Left Side Target
Mount and D tip style
25. Q179D1024 Miniature Flame Rectifier Pilot with 0.026 in. dia. Orifice, Dual Wing Right Side Target
Mount and D tip style
26. Q179D1057 Miniature Flame Rectifier Pilot with 0.024 in. dia. Orifice, Single Wing Left Side Target
Mount and L tip style
27. Q179D1925 Miniature Flame Rectifier Pilot with 0.016 in. dia. Orifice, Dual Wing Rear Target
Mount and D tip style
About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products,
including industrial, commercial and residential parts and equipment from Honeywell, Johnson
Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to
navigate and search, and all products have a picture and a description. If a customer has any
questions about a product, they can call 800-757-5999 and speak with one of our product
experts. Our mission is to offer the best prices anywhere to our customers.
Julian Arhire
Manager DtiCorp.com
Phone: 954.298.2515
Fax: 954.206.0767
Web: http://www.DtiCorp.com
###
DtiCorp.com, Honeywell, Gas Pilot Burner Assemblies, flame rod, pilot flame, Flame Rectifier
Pilot, flame safeguard control, gas burner, oil burner, gas pilot, C7005, Q179, C7005A1037,
C7005B1035, C7005B1050