Elm327 ecu tuning tool is elm327 obd2 diagnose interface. ELM327 obd2 scanner software for elm327 supports two platforms - DOS and Windows. Do you know How to use Elm327 ecu tuning tool ELM327 obd2 scanner.
Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
How to use Elm327 ecu tuning tool ELM327 obd2 scanner
1. ADK obd2tuning technology CO.,LTD
Web: www.obd2tuning.com
Skype: ADKobdtools
How to use Elm327 ecu tuning tool ELM327 obd2
scanner
Elm327 ecu tuning tool is elm327 obd2 diagnose
interface. ELM327 obd2 scanner software for elm327
supports two platforms - DOS and Windows. Do you know
How to use Elm327 ecu tuning tool ELM327 obd2
scanner.
Super Mini ELM327 Bluetooth mini elm327 v1.5 elm327
obd2 scanner
2. How to use Elm327 ecu tuning ELM327 obd2 scanner:
1. First, Connect OBDii ELM327 V1.5 with all the car, then
place the USB interface of ELM327 into your laptop.
2. Connect the 16 pin connector of elm327 scanner from
OBD2Tuning.com using the car’s 16 pin connector, then
start internet connected computers and connect the USB
of ELM327 on the laptop.
4. Install the application, position the CD into your laptop
and initiate install it. After proper install, you may saw an
3. icon of scan tool.
5. Turn the auto’s ignition on, start the potency of the auto,
you can view the sunshine shining, it implies the call has
succeed.
6. Click “my computer” begins the group of characteristic.
Click on the right button of this mouse, choose”
characteristic”.
7. With the “hardware”, choose “Device Manager”, to
create the COM port. On the “USB Serial POR” click the
right button of mouse, choose “characteristic”, choose
“comport set up” choose “baud to 9600. Inside the
OBD2Tuning elm327 obdii scan tool COM port setup,
choose “advanced”, you are able to select from comport 1
to comport.
8. Anyone is ok, then click enter. The set up of computer is
complete.
9. Double click the icon of “Scan Tool” on the desktop,
4. click “Sensor Data”
10. You'll see a window not, choose “ignore”
11. Inside option, find the same comport as previous
setting. Find the baud rate to 38400 and save it. Then you
can definitely look into the data.