View additional OpenEye cameras at http://www.openeye.net/products/cameras/

1. OPTIX BASIC TRAINING
Analog Cameras & Accessories
29433AB

2. INTRODUCTION
This presentation provides general information on the following aspects
of OpenEye OPTIX Cameras:
Each slide contains some basic information on the purpose of the
described function and identifies the associated options.

3. 100 SERIES
Analog IR Mini Dome

4. CM-135
HIGHLIGHTS:

5. CM-145
HIGHLIGHTS:

6. CA-145WM

7. 200 SERIES
Analog Indoor Mini Dome

8. CM-201
HIGHLIGHTS:

9. CM-205 SERIES
HIGHLIGHTS:

10. CM-215
HIGHLIGHTS:

11. FIXED CAMERA MOUNTS
QUICK MOUNT ADAPTER
The OPTIX quick install adapter is included with every
CM-200 Series camera, and can dramatically reduce
installation time.

12. CM-200 & CM-300 SERIES MOUNTS

13. 300 SERIES
Analog Outdoor Mini Dome

14. CM-301
HIGHLIGHTS:

15. CM-305
HIGHLIGHTS:

16. 400 SERIES
Analog Indoor PTZ Dome

17. CM-410
THE CM-410 CAMERAS INCLUDE:

18. PTZ CAMERA MOUNTS – CM-410

19. 500 SERIES
Analog Outdoor PTZ Dome

20. CM-511
THE 511-SERIES CAMERAS INCLUDE:

21. PTZ CAMERA MOUNTS – CM-511

22. IP CAMERAS

23. INDOOR IP MINI DOME
CM-610
OpenEye’s CM-610 camera is a small form factor indoor
camera designed to reduce installation time and cost by
utilizing Power over Ethernet. The CMOS sensor in the
CM-610 provides a 2MP high resolution image using either
MJPEG or H.264 codecs. The 610 also includes an integrated
microphone for audio transmission (where permitted by law).

24. OUTDOOR IP MINI DOME
CM-710
OpenEye’s CM-710 is a small form factor rugged Network
camera designed for outdoor installations. The 710 is IP66
rated against weather, and comes with an IP67 rated network
adapter cable and adapter for a fully ruggedized installation.
The CMOS sensor in the CM-710 provides a 2MP high
resolution image using either MJPEG or H.264 codecs.

25. CM-610 VS CM-710
The CM-610 and CM-710 cameras are nearly identical and share the same configuration options. The difference
between the two is that the CM-710 is suitable for outdoor installation while the CM-610 is not. Below is a complete list
of differences between the two cameras.
CM-610 CM-710
Ingress Protection (IP) Rating N/A (Indoor Only) IP66
Audio Inputs 1 0
RJ-45 Input On Base On Cat5 Lead

26. OUTDOOR IP DOME
CM-715/CM-715A
The OpenEye CM-715 is a 2 megapixel outdoor dome
camera which provides an IR cut filter for a true day/night
image. The CM-715A features an auto-focus lens.IP66 rated
against moisture, tamper resistant, and equipped with an
integrated heater and fan for operation in temperatures as low
as -40°F (-40°C), the 730 is built for tough environments
where normal security cameras cannot survive.

27. OUTDOOR IP DOME
CM-730
The OpenEye CM-730 is a 1.2 megapixel outdoor dome
camera which provides wide dynamic range imaging for
installations where high contrasting lighting is a problem, and
has an IR cut filter for a true day/night image. IP66 rated
against moisture, tamper resistant, and equipped with an
integrated heater and fan for operation in temperatures as low
as -40°F (-40°C), the 730 is built for tough environments
where normal security cameras cannot survive.

28. CM-715/730 ACCESSORIES
CA-730PH (PENDANT HOUSING)
The CA-730PH adds a sun visor and should be used in
warm environments where the camera will be directly
exposed to the sun. It also adds compatibility with all
CM-511/CM-814 mount options.

29. CM-715/730 ACCESSORIES
CA-730FMK (FLUSH MOUNT KIT)
The flush mount kit for the CM-730 allows it to easily be
installed in a ceiling for a custom and discrete look.

30. OUTDOOR IP PTZ DOME
CM-814
The OpenEye CM-814 is a 4CIF (720x480) outdoor PTZ
dome camera; ideal for all installations that demand high
quality video with mechanical pan/tilt and optical zoom
control. The 814 provides wide dynamic range imaging for
installations where high contrasting lighting is a problem, and
has an IR cut filter for a true day/night image.

31. 1 CH VIDEO SERVER
NE-VS201
The VS201 uses either 12vDC power input or PoE and
includes a 12vDC power output to easily scale into existing
installations. The VS201 has a looping video output for use
with CCTV monitors and displays, an RS-485 bus for control
of PTZ cameras, and alarm input and output for hybrid sensor
integration into OpenEye's NVR and HVR systems.

32. ACCESSORIES

33. ACCESSORIES
CA-D4000
The CA-D4000 is a multi-function tool designed to ease
installation of analog and network cameras. Its
capabilities include display of analog or network video,
analog or network PTZ control & network cable testing.

34. PTZ KEYBOARD JOYSTICK CONTROLLER
THE PTZ KEYBOARD JOYSTICK
CONTROLLER OFFERS:

35. 23221 E K nox Ave
Lib e rty Lake , WA 9901 9
1 -888-542-1 1 03
www.openeye.net
www.op e ne ye .ne t
© 2010 Openeye, Inc. All rights reserved.