Ten Organizational Design Models to align structure and operations to busines...
Quest AQ
1.
2.
3. What is Moisture Management ? The ability of a garment to transport moisture away from the skin to the garments outer surface Moisture management often refers to the transport of both moisture vapor & liquid away from the body. Moisture vapor can pass through openings between filters of yarns. In the case of cotton or other hydrophilic fibers the fiber can serve as a buffer by absorbing moisture vapor & adding to the comfort properties of a fabric. Liquid water ( or perspiration) must be wicked into a fabric structure & then evaporate from the outside of the fabric.
4. Textile as a barrier to comfort Textile commonly worn act as a barrier between the external Environment & the human body. The behavior of moisture in Various fibers is different owing to their physical & chemical Properties making it uncomfortable to the wearer- unless the Moisture is carried away by a natural drying process or aided by the apparel. Polyester is being increasingly used in apparel, especially due to Its strength, durability & fastness etc. Unfortunately owing to its Inherent properties it can not absorb & transport moisture from Body sweat. In some structures such as polyester knits, the Water absorption of sweat released as perspiration, however such modification either by fabric construction fiber & or chemical treatment make the fabric absorbent thereby retaining moisture inside the fabric for long period of time. Such retention will then result into “ post exercise chill” as the retaining moisture starts absorbing the body heat to evaporate from fabric.
5.
6. Limitations While the current Technologies to Improve the Absorption Properties, there Are questions on Durability of the Performance, the Requirement of Process conditions & silicone films, Which tend to Break during use & washing. So what is Comfort all about To be able to create Comfort in apparel & more particularly in Intimate wear or Sportswear, the textile Substrate has to be Programmed to quickly Attract moisture & Release moisture even More quickly leading to Swift drying/ This Releases valuable area Of the apparel for the Next round of absorption
7.
8.
9. Application Standard usage is shown below & should vary depending on the target material, the purpose & conditions. Conduct a preliminary test for determining an appropriate amount including the compatibility with other chemical Agents to used: By Pad: Quest AQ - 10 – 50 g/l Pad dry cure 150 – 190°c for 1 min. By Exhaust Quest AQ - 1.5% o.w.f pH - 4 – 5 MLR - 1: 10 – 30 Temperature - 40°c Time - 20 – 40 mins.