The Pipestoppers™ expanding plugs and inflatable stoppers are suitable for over 101 applications. Typically they will be used for low pressure testing (Drain Testing), Debris stopping/Foreign Body Exclusion etc. within industries such Car Radiator Pressure Testing, Truck Radiator and Intercooler Pressure Testing, Heating and Ventilation applications, Turbine and Pressure Vessel repair and maintenance, Pipeline Protection, Installation and Maintenance, Landfill Monitoring, Casting Treatment, Product Spraying and many others.
2. Schematic diagram showing working principle of Pipestoppers™ Nylon Plugs Pipestoppers ™ Nylon Plugs Pipestoppers™
3. ■ 1940’s The Pipestoppers™ Nylon Plugs were designed and developed by a German engineer called Karl Guttentag ■ Karl started to sell his plugs through his company called Hiltlake Ltd. ■ Huntingdon Fusion Techniques began purchasing these plugs in 1975 for weld purging purposes ■ Once HFT’s use had become so large, HFT purchased the product line and integrated it into the HFT range of products. Pipestoppers ™ Nylon Plugs Pipestoppers™
4. ■ Over 100 applications or uses for Nylon Expanding Plugs ■ Applications with all manufacturers, service companies and households ■ Exclusive Distributors appointed in every area ■ Great door openers for distributors Pipestoppers ™ Nylon Plugs Pipestoppers™
5. Pipestoppers ™ Nylon Plugs Nylon Product Overview Solid Shaft Nylon Plugs Family of hollow shaft Nylon Pipe Plugs
7. Nylon Plug Range – Solid stem shafts for pressure/leak testing Pipestoppers ™ Nylon Plugs Nominal sizes: ½”, ¾”, 1” 1¼”, 1½”, All internal diameters covered between: 12 – 54 mm, pressure range 150 psi (smallest) to 60 psi (largest) 4 – 10 Bar
8. Nylon Plug Range - Hollow shaft plugs – Small diameter range 8mm Pipestoppers ™ Nylon Plugs Nominal sizes: ½” , ¾”, 1” 1¼”, 1½”, externally threaded with 8 mm thread and cap with seal
9. Nylon Plug Range - Hollow shaft plugs – ½” BSP hollow shaft range Pipestoppers ™ Nylon Plugs Nominal sizes: 1½”, 2”, 2½”, 3”, 3 ½”, 4”, 4½” 5”, 6”, externally threaded with ½” BSP thread and cap with seal.
10. Nylon Plugs Available in any colour Pipestoppers ™ Nylon Plugs
11. Nylon Plugs - Typical Applications Construction Industry Pipestoppers ™ Nylon Plugs
13. Nylon Plugs - Typical Applications Construction Ready made plug kit for plumbers to store and retrieve their plugs easily Pipestoppers ™ Nylon Plugs
14. Leak testing domestic water drainage system Nylon Plugs - Typical Applications Construction Pipestoppers ™ Nylon Plugs
15. Leak testing Main Foul Water System Nylon Plugs - Typical Applications Construction Pipestoppers ™ Nylon Plugs
16. Nylon Plugs - Typical Applications Construction ■ Rainwater collection system - leak testing ■ Leak testing domestic plumbing systems ■ Leak testing and flow control in industrial plumbing systems Pipestoppers ™ Nylon Plugs
17. Foul water outlet stopper and leak testing Nylon Plugs - Typical Applications Construction Pipestoppers ™ Nylon Plugs
18. Monitoring land fill gas release Pipestoppers ™ Nylon Plugs Nylon Plugs - Typical Applications Construction
24. ARGWELD® All photos courtesy of Huntingdon Fusion Techniques Limited, UK. Thank You
Notas del editor
Pipestoppers one word for the ™ symbol naming the division of the Company, Use as two words if it describing the products: OK thanks this is always hard for a Dutch person