1. Proactive Industrial Assembly Techniques – Saves your company
time and money and gives you peace of mind !
No one services the Industrial Assembly and Maintenance Markets better than we do ! Our products are
designed to assist you at the time of assembly. Our adhesives and sealants, anti-seize and assembly lubricants are
designed for peak performance in wide temperature ranges, severe weather, and chemical exposure.
No matter you are looking at pipe fittings, gaskets, press-fits of bearings or keyways, nuts and bolts or O rings and Oil
Seals, we can help you improve your equipment reliability, reduce downtime, increase your productivity, and best of all
provide you peace of mind. Several equipments failures are a result of mechanical assembly failures.
Failures can happen through O ring and seal failures, alignment problems, loosening, leakages, scuffing, scoring,
galling, seizing, fretting and more. These can be avoided by adopting proactive maintenance procedures. Let’s look at
how a few of these can be avoided in your organization.
‘O’ ring and oil seals come in contact with
media and become brittle and a leak starts.
This can be easily avoided with the use of
rubber assembly lubricants1 that help
lubricate and protect rubber components
and form a protective barrier preventing the
rubber from becoming brittle.
When you do press-fits, we recommend
using a press-fit assembly paste2. This
avoids scuffing and scoring of the shafts or
components being press-fitted and
prevents fretting corrosion that cause
seizure. These pastes also allow easy
disassembly after long periods of time.
There is more to following fasteners cross
tightening sequence in assemblies. If a
thread paste is not used, varying torque
tension can occur in assembly and cause
flange failures. In high temperatures,
fasteners can seize if a proper anti-seize
paste3 is not applied.
Pipe Threads can leak due to thread
failures or gaps that can exist after
tightening. Pipe Thread Sealants4 help in
sealing metal and plastic pipes against
steam, water, gas, etc and avoid leakage.
Non-hardening products are always better.
Metal-to-Metal joints can have leakages
due to asperities on the surfaces. These
asperities can be filled up using appropriate
sealants5 that can handle the required
temperature, pressure, media and gap fill
characteristics of the joint.
Contamination induced during an assembly
can cause premature failure of several
components including bearings. Preventing
contamination at the time of assembly is
easily avoided with the use of appropriate
cleaners and degreasers6 and wipes.
Products Referenced in this mailer are some typical example of products available from Project Sales Corp. For a complete range, please drop us a mail or call us on +91-98851-49412
1 Molykote 111 O ring Lubricant 2 Molykote GN+ Paste/ G-Rapid Spray 3 ASV Copper Lube/ Molykote 1000
4 Laco Slic-Tite/Pipe-tite Sealants 5 732 RTV, Arexons, Marston, Birkosit, etc 6 ASV Cleaners CS50, CS60, CS35
Explore your options with us.™
Write to us today at 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP
or mail us at sales@projectsalescorp.com.
You can fax us at 0891 2590482 or call us on 0891 2564393; 5566482.