PSC Knit Impact Glove
Range from Mechanix,
HexArmor, KONG, Ringers, Superior
reduced cost of ownership of
impact protection gloves in
2014 and increased
penetration in the oil and
gas industry. It now plans to bring the Granberg range of assembly gloves to India
1. Psc Cut resistant Work gloves EN:388-4543
for protection against mechanical risks
Call +91-98851-49412
offshore@projectsalescorp.com
*Products imported from europe
PSC Cut Resistant Gloves With Mixed Fibers
With polyurethane coating.
»»Especially abrasion and tear resistant.
»»Excellent protection against cuts and punctures. »»Fitted with
great touch sensitivity.
Suitable for: Assembly work with high requirements to abrasion
resistance and where there is risk of cut injuries. Cut level: 5.
EN:388-4543. PSC116CR. Rs.520 per pair
PSC Cut Resistant Gloves with Typhoon®
Fully dipped with nitrile foam. Dotted palm. Provides superior cut
resistance, level 5 / EN 388. This offers superior cut resistance for
applications involving contacts with sharp objects. »»The Lycra® in
the liners as well as the elastic nitrile foam coating, provides
outstanding flexibility and fit. »»Designed for dry and oily
environments. Suitable for: Use in areas with high risk for cuts and
for users who prefer 360° coating | Handling of glass sheets, sharp-
edged objects | Assembling metal parts and components | Cutting of
dry or oiled parts. EN:388-4543 PSC116549CR5. Rs.700 per pair
PSC Cut Resistant Gloves with Typhoon®
With sandy nitrile coating. Yellow Hi-Viz™ colour.
»»Bright fluorescent yellow colour makes these gloves easily
visible even in dim light. »»Provide maximum protection against
cuts, level 5 / EN 388. »»Very comfortable gloves with good wet
grip and excellent dry grip. »»Rejects oil and grease. »»Soft and
flexible gloves with long life. Suitable for: Use in areas with
high risk of cuts and high standards of visibility. PSC116575CR5
EN:388 4543 Rs.650 per pair
By project sales corp*
A range of work gloves designed for use in workshops where tasks
performed do not expose workers to back of hand injury but can expose
them to cut related injuries on the palm or back of hand. Using some of the
world’s toughest fibres, these work gloves – protector series are premium
high end protection gloves where you need the best in cut protection in
high risk environments.
PSC Cut Resistant Gloves with Typhoon® fibre with nitrile coating,
oil resistant.
»» Especially abrasion and tear resistant. »» Excellent protection
against cuts and punctures. »» Fitted with great touch sensitivity.
Typhoon® is one of the strongest fibres in the world.
Suitable for: Assembly work with extremely high requirements to
abrasion resistance and where there is great risk of cut injuries)
PSC116548CR5 Rs.750 per pair