We are a speciality oilfield lubrication products distributor with focus on stocking products that find specific application in the oil and gas industries.
Covered here are products that are currently being stocked at our stores in Visakhapatnam and Kakinada.
Lubrication accounts for a small part of the overall maintenance budgets and the right lubricant goes a long way to reduce downtime, improve reliability and enhance equipment life. So go ahead and take a look at what’s in our store and if you need any additional information, please do not hesitate to call on us on +91-891-2566293 or send us an email at offshore@projectsalescorp.com
Understanding the Pakistan Budgeting Process: Basics and Key Insights
PSC Oilfield Lubricants, Call +91-891-2566293
1. PSCPSCPSCPSC Oilfield Lubrication RangeOilfield Lubrication RangeOilfield Lubrication RangeOilfield Lubrication Range
Project Sales Corp is the India stockist for the most complete range of
oilfield specialty lubrication products. We represent a host of well
known brands in India Markets. This presentation will take you through
the key products we have that finds application in the marine and oil
and gas industries.
Please feel to circulate this presentation to your colleagues who might
benefit from the use of this.
Satish Agrawal, Project Sales Corp
Visakhapatnam, September 2015
2. IntroductionIntroductionIntroductionIntroduction
We are a speciality oilfield lubrication products distributor with focus
on stocking products that find specific application in the oil and gas
industries.
Covered here are products that are currently being stocked at our
stores in Visakhapatnam and Kakinada.
Lubrication accounts for a small part of the overall maintenance
budgets and the right lubricant goes a long way to reduce downtime,
improve reliability and enhance equipment life. So go ahead and take a
look at what’s in our store and if you need any additional information,
please do not hesitate to call on us on +91-891-2566293 or send us an
email at offshore@projectsalescorp.com
3. Brands in our PortfolioBrands in our PortfolioBrands in our PortfolioBrands in our Portfolio
4. TS Moly Application AreasTS Moly Application AreasTS Moly Application AreasTS Moly Application Areas
Riser & BOP Bolts, Mud Pumps, Top Drives, Jacking System, Skidding, Gate Valves, Sheaves
and Wire Ropes
Equipment Suggested Lubricants
Mud Pumps Gear Box TS-90
Bolts all equipmments TS-70
Jacking System
Primary Gear Box TS-90 or TS-319
Secondart Gear Box TS-90 or TS-319
Pinion Gear Shaft TS-65 or Ts-333
Rack TS-210 or TS-209
Hydraulic Power Slip TS-210 or TS-209
Riseer tensioners wire rope TS-210
Breech-Clock style riser connection TS-63
Crown Block Sheave TS-116
Drill String Compensator pin TS-70
Top Drive TS-90
Agitator TS-90
Anchor Winch TS-65 or TS-116
Fixation System TS-210 or TS-334
Cantilever Skid Rails TS-264
BOP Transporter (Skidding Type) TS-264
Packing of swivel wash pipe assembly TS-66V
Underwater Fairlead TS-334, TS-116
Chike and kill manifold valves TS-66V
Chains TS-602 or TS-65
Wash Pipe TS-801 or TS210
Wire Ropes TS-65 or TS-210
Slings TS-480
Travelling Block TS-65 or TS-116
Equipment Suggested Lubricants
5. Gear Oil Additive for Triplex Mud PumpsGear Oil Additive for Triplex Mud PumpsGear Oil Additive for Triplex Mud PumpsGear Oil Additive for Triplex Mud Pumps
• Newly machined gears often go through a phase of initial running-in wear due to metal to metal
contact. In the case of heavily loaded gears also the oils are not able to provide the separating film
between the tooth surfaces. Therefore the use of an additive that can provide a separating film or assist
in plastic deformation helps. Molybdenum disulphide with a natural affinity for metal is the best option
due to its very high load handling characteristics.
• Project Sales Corp authorised distributors for TS-Moly in India stocks the TS-90 Moly Gear Concentrate
(Additive) that can be used to newly machined or heavily loaded gears to minimise friction; reduce gear
wear; protection during intermittent, extreme operating conditions; reduce gear noise levels and
improve energy efficiency and prolong equipment life.
• Available in 5 gallon plastic pails (35 lbs) from stock
6. Riser, BOP Flange Bolts LubricationRiser, BOP Flange Bolts LubricationRiser, BOP Flange Bolts LubricationRiser, BOP Flange Bolts Lubrication –––– TS70TS70TS70TS70
TS-70 Moly Paste is a thread compound with 70% molybdenum disulfide, NLGI No.2, especially suitable
for wet or corrosive conditions, including subsea applications. It has highly consistent torque values for
makeup and breakout.
TS-70 is a general purpose moly paste with many uses. It has proven to be an outstanding lubricant for a
saltwater environment, above and below the surface: subsea riser, BOP, flange equipment and structural
bolts. Other applications are components for press fittings, threads in tapping, boundary lubricating of parts
in assembly and make-up, bushings of heavily loaded slow moving bearings, and many more. Apply by
brushing or burnishing.
TS-70, with 70% by weight of molybdenum disulfide, provides uniform and durable boundary lubrication
under extreme pressure, in wet or corrosive environments, and over a wide temperature range. Its
coefficient of friction nearly approaches that of pure MoS2, and superior wear protection is assured. TS-70
does not contain metals.
Available from Stock in 4 lbs and 52 lbs pails
7. Sweeney Moly 503 PasteSweeney Moly 503 PasteSweeney Moly 503 PasteSweeney Moly 503 Paste
• Sweeney Anti-seize lubricants are combinations of oil-base and solid lubricants that produce a hybrid suited for
static joints including threaded surfaces, press fits, slip fits, transmission joints and gaskets.
• 503 Moly Paste Lubricant contains 65% solid lubricants suspended in a soft paste. A heavy, black paste with
unsurpassed lubricating qualities, 503 is our most efficient lubricant in reducing friction. On threaded fasteners
(bolts, nuts, studs) the low uniform friction coefficient of 0.06 creates reliable assembly conditions. The lubricant
then stays in place through heat, load and vibration to insure trouble free disassembly.
• Applications : Press fits, threaded fasteners, slip fits, metal-working (including drawing, stamping, coining,
extruding, and forging by lower friction, and eliminating scratching, galling, and metal pick-up), splines and
gears.
• Recommended for BOP Bolts, Risers, and several offshore applications.
• Pack Size 3.8 lbs.
• Available from ready stock. Project Sales Corp has also re-exported this product to several countries.
8. Aquashield (formerly Aqua lube Grease)Aquashield (formerly Aqua lube Grease)Aquashield (formerly Aqua lube Grease)Aquashield (formerly Aqua lube Grease)
Lubricates. Seals. Inhibits Rust. WaterproofLubricates. Seals. Inhibits Rust. WaterproofLubricates. Seals. Inhibits Rust. WaterproofLubricates. Seals. Inhibits Rust. Waterproof
AQUASHIELD is a multi-purpose lubricant and sealant that is compounded specifically to cling to metal and
“O” ring surfaces, provide long term lubrication, and rust protection. It is designed to seal out water and
contaminants. Excellent shear stability over long periods. Retains its consistency whether in use or at rest.
AQUASHIELD is extremely effective in any application where bearings or gears are affected by wet conditions
such as motors, and valves that must operate in hot or cold water, steam, pool chemicals, or salt water.
Applications
ROV/ Manipulator Arms
Bearings
Water filters
“O” rings
Valves
Pack size 8oz tubes and 37 lb pails
Caution - this is extremely tacky waterproof grease, use gloves to apply as it's very
difficult to wash off. Remember its made to work underwater without washout.
We have found that mineral spirits works to remove from hands if you didn't read
the warning first.
9. Cameron TFCameron TFCameron TFCameron TF----41 Choke Manifold Valve Grease41 Choke Manifold Valve Grease41 Choke Manifold Valve Grease41 Choke Manifold Valve Grease
Project Sales Corp imports and stocks the OEM Product - Cameron Valve Lubricant TF-41 for
use in subsea lubrication application for choke/manifold usage. Made in USA. Excellent
resistance to crude and fair resistance to H2S (sour crude or gas).
Available in 20 lb pails. PART# 700668. Imported and Stocked by Project Sales Corp.
10. Climax Valve LubricantsClimax Valve LubricantsClimax Valve LubricantsClimax Valve Lubricants –––– ‘K’ Sticks‘K’ Sticks‘K’ Sticks‘K’ Sticks
PSC #900M ‘K' stick - 1-1/2" dia x 12" long for hydrocarbons service
An all-purpose High Temperature Hydrocarbon and Natural Gas lubricant. Recommended for Natural Gas
Pipelines (gas condensate, and/or water), Refineries, Gasoline Plants, Petrochemical Plants, Crude Oil
Production, Rubber Plants, Compressor Discharge Valves, Dehydrator Valves, Steel Mills, Amines/Diluted
Acids, Tailing Systems all w/concentrations of H2S, CO2. The material is suitable for use in Plug, Ball and API
Gate Valves; both as a body fill and seat lubricant. Used with low torque plug valves (alternative to part #
70.31058)
Used with asphalt, carbolic acid, cellulose acetate, coal tar, cutting oils, fuel oil pitch, tar, natural gas,
petroleum, and general hydrocarbon service. PSC-900M K-stick 1-1/2"Dia X 12" Long. Sold per stick.
Available in stock. "K“ stick grease fits the 10516 series, 1700K series, Rocket 280/380 series guns.
NON TOXIC-HAZARDOUS MATERIAL I FLASH POINT ABOVE 400 DEG.F. I NON FLAMMABLE I Manufactured -
U.S.A.
• DROPPING POINT - None
• BASE OIL - SYNTHETIC
• SHELF LIFE 5-YEARS
• OXIDATION STABILITY GOOD
• TEMPERATURE RANGE -40 DEG.F.TO +650 DEG.F.
• PENETRATION (ASTM 220-250) NLGI GRADE #3
• THICKENER - INORGANIC
• FILLER - MOLYBDENUM-DISULFIDE
• COLOR- BLACK
11. Wire Rope LubricantWire Rope LubricantWire Rope LubricantWire Rope Lubricant –––– BrilubeBrilubeBrilubeBrilube 70707070
BRILUBE 70 - a medium thixotropic gel lubricant with stable properties over a wide temperature range
offering corrosion protection against marine working conditions. Formulated for long life on static or dynamic
ropes in highly aggressive environments.
BRILUBE 70 is recommended for use in off-shore and other hostile environments where effective lubrication
and optimum corrosion protection are vital. Effective operating range -55ºC to +100ºC Minimum application
temperature -20ºC.
Brilube 70 can be pressure applied using in-line application systems which are available to suit a wide range
of rope sizes and constructions. These systems operate by forcing the lubricant into the rope under high
pressure, whilst simultaneously cleaning the rope and removing the moisture, residual lubricant and
contaminants.
Benefits -
• Advanced corrosion protection
• High lubricity
• Reduced fling off
• Enhanced rope life
• Effective penetration
• Easy application
Packed in pails, net weight 12.5 kgs
Delivered from stock
12. Lubriplate 630AA MultiLubriplate 630AA MultiLubriplate 630AA MultiLubriplate 630AA Multi----purpose Greasepurpose Greasepurpose Greasepurpose Grease
LUBRIPLATE No. 630-AA is an NLGI No. 1 lubricant and the most popular
multipurpose general grease. Ideal for automatic dispensing systems and centralized
systems with large lines.
ADVANTAGES
- Water resistant.
- Excellent grease mobility in constant service applications.
- High anti-wear for extra lubricity.
- Oxidation inhibited.
- Wide operating temperature range.
Available in 35 lb pails
Also available small packs of 930 AA and 930 AAA Greases
13. NeverNeverNeverNever----seezseezseezseez AntiAntiAntiAnti----seize and Assembly Pastesseize and Assembly Pastesseize and Assembly Pastesseize and Assembly Pastes
Project Sales Corp imports and stocks the complete range of Bostik Never-seez® range in India
Never-Seez contains very fine metallic particles in a special hydrocarbon carrier which seals and protects
metal parts under the most extreme conditons of heat, pressure, and contamination. The fine, protective
film of Never-Seez cannot be burned off or completely removed by abrasion. Never-Seez cannot be washed
off by fresh or salt water. The protective coating will remain, even after extended
exposure to the elements. Application of Never-Seez insures trouble-free protection against seizure,
corrosion, pitting, and galling of metal parts.
Available in stock –
Neverseez Regular Grade in 16oz, 8 lbs, 42lbs
Neverseez Mariner’s Choice in 8oz
Neverseez Pure Nickel Special in 8 and 16oz
Neverseez Blue Moly Paste in 16oz
Neverseez Black Moly Paste in 16oz
Neverseez Pipe Compound with PTFE in 8 oz
14. Mystik General Purpose GreaseMystik General Purpose GreaseMystik General Purpose GreaseMystik General Purpose Grease
Mystik General Purpose Grease is a very economical multi-purpose grease
especially suited for normal temperature/speed conditions and non-critical
service applications. This product is economical for applications requiring
frequent re-greasing due to a contaminating environment.
• Water Insoluble
• Economical
Pack Size 400 grams cartridge and 35 lb pails
15. Mystik JTMystik JTMystik JTMystik JT----6 High Temperature Grease6 High Temperature Grease6 High Temperature Grease6 High Temperature Grease
Mystik JT-6 Hi-Temp Grease is a high-temperature, lithium-complex grease that
combines excellent multi-purpose properties with a high dropping point and low
temperature pumpability that provides a wide operating temperature range. Mystik
JT-6 Hi-Temp greases exhibit a high Timken OK Load in addition to providing excellent
Four-Ball Wear and EP performance. They provide superior protection to lubricate a
wide variety of automotive, agricultural, trucking, mining, construction, and
industrial equipment. They provide outstanding shock load protection.
Pack Size 400 grams cartridge and 35 lb pails
16. Mystik JTMystik JTMystik JTMystik JT----6 Multi6 Multi6 Multi6 Multi----purpose Greasepurpose Greasepurpose Greasepurpose Grease
Mystik JT-6 Multi-Purpose Grease is our most water resistant and water insoluble product. It is
light colored, low staining, and has a very low oil separation rate. Mystik JT-6 Multi-Purpose
Grease provides excellent anti-seize protection under high loads. Outstanding adhesion enables
this product to stay in place better than most other greases. This product is a medium
temperature range multipurpose grease for extreme pressure loads and slow to medium speed
bearings.
It is excellent for greased chassis points, fifth wheels, and water pumps. It works especially well
where extended lubrication intervals are practical, highly loaded or shock loaded grease
lubricated applications exist, and excellent rust protection is desired. It is fully rust and oxidation
inhibited. Mystik JT-6 Multi-Purpose is also available in an aerosol form. This product penetrates
hard-to-reach points to leave a protective coating of grease. Mystik JT-6 Multi-Purpose Spray
Grease has the ability to stay in place and lubricate, even under extreme pressures and severe
service. It resists rust, corrosion, oxidation, and wear. This product is ideal for hard to reach
points and precise placement. Mystik JT-6 Multi-Purpose Spray Grease dries into a non-fluid
consistency in about 15 minutes.
Pack Size 400 grams cartridge, 450g tubs and 35 lb pails
17. Mystik JTMystik JTMystik JTMystik JT----6 High Load Moly Grease6 High Load Moly Grease6 High Load Moly Grease6 High Load Moly Grease
Mystik JT-6 Hi-Temp Grease with Moly is a high performance mining and construction grease that provides
superior performance where a moly-compounded, adhesive, multi-purpose high temperature lithium
complex grease is required. This product gives optimum protection in severe environments.
Mystik JT-6 Hi-Temp Grease with Moly provides excellent performance where Ford ESA-M1C75-B, Mack
Multi-Purpose MG-C, or Caterpillar 3% Moly Lithium greases are recommended. NLGI Certified GC-LB. • An
exceptionally versatile premium quality multi-purpose lithium complex grease • Fully additive treated.
EP/antiwear, rust and oxidation inhibited • Contains 3% Molybdenum Disulfide (moly) for extreme service
conditions found in mining, construction, and severe industrial applications
• Water insoluble and water washout resistant
• Superior wheel bearing and chassis performance
• Superior protection to lubricate a wide variety of heavy equipment
• Provides excellent performance where Ford ESA-M1C75-B, Mack Multi-Purpose MG-C,
or Caterpillar 3% Moly Lithium greases are recommended
Pack Size 400 grams cartridge and 35 lb pails
18. Mystik JTMystik JTMystik JTMystik JT----6 Marine Grease6 Marine Grease6 Marine Grease6 Marine Grease
Mystik JT-6 High Performance Marine Grease is a smooth but tacky blue grease with outstanding
water resistance. It is designed to provide excellent lubrication for greased chassis points and other
wet-environment applications.
Mystik JT-6 High Performance Marine Grease combines an anhydrous calcium thickener system,
special polymer and a proprietary additive system to ensure superior performance against rusting in
both fresh and sea water marine applications
• Water insoluble, excellent water resistance
• Includes rust and wear protection
• Extreme Pressure (EP) and shock load protection
• Compatible with most lithium and lithium complex based greases
• Polymer fortified for very good metal
Recommended for greased automotive chassis points, trailer wheel
bearings, bearing buddies, boat lifts, hydraulic jack plates, steering components, tilt and trim systems, Etc.
Pack Size 3oz cartridge, 400 grams cartridge and 1 lb tubs
19. Bestolife CBLFBestolife CBLFBestolife CBLFBestolife CBLF----HTHTHTHT
NonNonNonNon----Lead/NonLead/NonLead/NonLead/Non----ZincZincZincZinc Thread Compound for Rotary ShoulderedThread Compound for Rotary ShoulderedThread Compound for Rotary ShoulderedThread Compound for Rotary Shouldered ConnectionsConnectionsConnectionsConnections
CBLF - HT has been developed as an answer to the environmental restrictions and exposure concerns
associated with the use of lead and zinc drill collar/tool joint thread compounds. It contains copper flake
combined with a proprietary blend of amorphous and synthetic graphites, along with oxidation and H2S
inhibitors, in a high temperature base grease. In addition to the galling and seizing protection provided by the
solids, it also contains a soluble extreme pressure package that is surface active (adheres to metal surfaces)
and helps to provide the load carrying capability required by the high bearing stresses present in rotary
shouldered connections. CBLF - HT has a torque correction factor of 1.1 (10% additional torque required)
which will provide additional resistance to down-hole make-up as compared to lead or zinc compounds. It
applies easily in a wide range of temperatures and conditions, is resistant to wash-out and will not harden or
bleed excessively in storage. RECOMMENDED FOR all drilling applications (rotary-shouldered connections),
including high temperature environments. Also effective for use on open gear jack-up legs.
COLOR Dark copper I PENETRATION 300 - 320 (ASTM D 217)
WEIGHT/GALLON 10.2 pounds/gallon
DROPPING POINT 500ºF/260ºC (typ) I FLASH POINT 385ºF/196ºC (min)
BRUSHABLE TO 15ºF/-9ºC
SERVICE RATING 600ºF/316ºC
TORQUE FACTOR 1.1 (per API RP 7A1)*
CONTAINS Copper flake, synthetic and amorphous graphite, and other
non-metallic additive
35 lbs pack
20. BestolifeBestolifeBestolifeBestolife GGT RSC 50GGT RSC 50GGT RSC 50GGT RSC 50 (Kovr(Kovr(Kovr(Kovr----kote® equivalent)kote® equivalent)kote® equivalent)kote® equivalent)
NonmetallicNonmetallicNonmetallicNonmetallic Thread Compound for RotaryThread Compound for RotaryThread Compound for RotaryThread Compound for Rotary----Shouldered ConnectionsShouldered ConnectionsShouldered ConnectionsShouldered Connections
NSF Registered†NSF Registered†NSF Registered†NSF Registered†
GGT-RSC High Temp has been developed as an economical answer to the environmental restrictions and
exposure concerns associated with the use of drilling compounds that contain heavy metals, such as lead and
zinc. It contains a high percentage of amorphous and synthetic graphites, as well as other inert solids, in a
high temperature base grease. In addition to the galling and seizing protection provided by the solids, GGT-
RSC High Temp also contains a soluble extreme pressure package that is surface active (adheres to metal
surfaces) and helps to provide the load-carrying capability required by the high-bearing stresses present in
rotary-shouldered connections. It applies easily in a wide range of temperatures and conditions, is resistant to
wash-out, and will not harden or bleed excessively in storage. It is recommended for medium to heavy duty
drilling. GGT-RSC HT has obtained registration from NSF, National Sanitation Foundation.†
COLOR Black
PENETRATION 300 - 320 (ASTM D 217)
WEIGHT/GALLON 10.7 pounds/gallon
DROPPING POINT 500º F/260º C (typ)
FLASH POINT 385º F/196º C (min)
BRUSHABLE TO 15º F/-9º C
SERVICE RATING 600º F/316º C
TORQUE FACTOR 1.0 (per API RP 7A1)*
CONTAINS Synthetic and amorphous graphite, and other non-metallic additives
50 lbs pails
21. Bestolife 72733 (API Modified replacement)Bestolife 72733 (API Modified replacement)Bestolife 72733 (API Modified replacement)Bestolife 72733 (API Modified replacement)
Lead BasedLead BasedLead BasedLead Based
BESTOLIFE 72733 is a high pressure, high temperature thread compound for casing, tubing, and line pipe that
exceeds API RP 5A 3 and obsolete BUL 5A2 and conforms to ISO 13678. It includes a special corrosion inhibitor
added to our discontinued 72732 formula for superior corrosion resistance as compared to API Modified.
APPLICATIONS
High-pressure thread compound for casing, tubing, and lining pipe.
PRODUCT CHARACTERISTICS
Color: Black-Copper
Penetration: 310-340 (ASTM D 217)
Weight/Gallon: 15.8 pounds/gallon
Dropping Point: 350°F/177°C (typ)
Flash Point: 385°F/196°C (min)
Brushable To: 0°F/-18°C
Friction Factor: 1.0
Contains: Graphite, lead, zinc, copper
50 lb pails
22. Bestolife Ultra 3010Bestolife Ultra 3010Bestolife Ultra 3010Bestolife Ultra 3010
Metal Free DopeMetal Free DopeMetal Free DopeMetal Free Dope
BESTOLIFE 3010® Ultra is a non-metallic thread compound for rotary-shouldered connections and is effective
for jack up systems. Heavy metal free for environmental concerns, the compound excels in low temperature
and high temperature environments. 3010® Ultra prevents galling and seizing on even, non-magnetic
surfaces, forming a gasket-like seal in a rotary connection for maximum protection in rough conditions.
APPLICATIONS
Non-metallic compound for rotary-shouldered connections in cold, wet conditions. Recommended for all
drilling applications (rotary-shouldered connections), including high temperature environments.
PRODUCT CHARACTERISTICS
Color: Black
Penetration: 320-350 (ASTM D 217)
Weight/Gallon: 10.4 pounds/gallon
Dropping Point: 310°F/154°C (typ)
Flash Point: 330°F/166°C (min)
Brushable To: -49°F/-45°C
Friction Factor: 1.0 (per API RP 7A1)
Contains: Amorphous and synthetic graphite and other non-metallic additives
35lb pails
23. Molykote 111 Silicone CompoundMolykote 111 Silicone CompoundMolykote 111 Silicone CompoundMolykote 111 Silicone Compound
WhatWhatWhatWhat the industry uses to avoid oil sealthe industry uses to avoid oil sealthe industry uses to avoid oil sealthe industry uses to avoid oil seal leakages !leakages !leakages !leakages !
Molykote® 111 is a silicone compound used during the assembly of ‘O’ rings and oil seals to prevent oil
leakages due to degradation of ‘O’ rings and seals in harsh environments. Once applied on ‘O’ rings and oil
seals, it forms a protective barrier between the rubber and the media (oil, fuels, hot water, dilute
chemicals), and does not allow the rubber to become brittle. It acts as a rubber lubricant and provides a
better sealing effect.
Lubrication for rubber seals and ‘O’ rings to prevent degradation and oil leakages, sealant for vacuum and
pressure systems, chemical barrier coating, as an anti-stick sealant for transformer gaskets, O – ring
lubricant in binocular and telescopes, Sealant for outdoor equipment, including shipboard applications,
subject to washing and harsh environments, etc. Used only at the time of assembly by liberally spreading
over the sealing element to extend seal life.
Chemical Resistance
Resistant to the following: cold and hold water, 40% nitric acid, concentrated sulfuric acid, glycol,
glycerine, lubricating oils, butane, refinery gas, natural gas, liquid ammonia, sulphur dioxide, etc.
Used by SLB for several years now for well logging tools.
Available in 1 kg packs
24. MD Totco W15 FluidMD Totco W15 FluidMD Totco W15 FluidMD Totco W15 Fluid
Martin Decker All Purpose W15 FluidMartin Decker All Purpose W15 FluidMartin Decker All Purpose W15 FluidMartin Decker All Purpose W15 Fluid
Martin Decker W15 Red All Purpose Fluid for weight indicator sensors, lubricators on rig floor, mud pump
and stand pipe pressure gauge, etc
1 Quart OEM Packs from NOV
4 quarts = 1 Gallon
(when ordering for 1 Gallon, PSC will supply 4 of 1 Quarts packs)
25. Erifon 603 HPErifon 603 HPErifon 603 HPErifon 603 HP
Hydraulic & BOP Control Fluid ConcentratesHydraulic & BOP Control Fluid ConcentratesHydraulic & BOP Control Fluid ConcentratesHydraulic & BOP Control Fluid Concentrates
Erifon HD 603HP is a field proven, dilutable, water based hydraulic fluid specifically formulated for use in
high-pressure open / vent to sea Blow Out Preventer (BOP) control systems. The fluid prevents valves from
sticking even after long static periods and improves system life under slow moving high load conditions.
Erifon HD603 HP is a fully synthetic hydraulic fluid concentrate, formulated for use at concentrations as
low as 1% (dependant upon application) in fresh or potable water.
The product exhibits excellent stability, anti-wear and anti-corrosion properties. It also possesses a high
resistance to microbiological attack. These features coupled with it being extremely economical in use,
make Erifon HD603 HP an ideal hydraulic operating medium for equipment designed for high water based
fluid. Erifon HD603 HP is particularly well suited to operations in hazardous environments and where fluid
losses may be high.
Typical applications are: High Pressure Blow-Out Preventer Systems
Pack Size – 1000 litres IBC
2 IBCs in stock
Additional quantity can have a lead time
26. All Brand names are registered trademark of their respective owners.
Project Sales Corp does not make any claim for being authorised to sell these products in india. Project
Sales Corp is in no way affiliated with all the original equipment manufacturers referenced above. We
however guarantee all products sourced will be 100% new and genuine and can come with certs when
required.
Certain brand names may have been used to reference a product or cross-reference only. They are used
for reference and should not be construed as having exact product characteristics of the equivalent
products mentioned.
It is important to check with us for materials being claimed to have been purchased from us. Project Sales
Corp accepts no responsibility for any material being sold by resellers to end-customers. Its liability is
limited to replacement of product in case of any manufacturing defects only.
Project Sales Corp markets Bostik Never-seez®, TS Moly, Climax, Molykote products under a distribution
arrangement with the brand owners as Authorised Distributors. Cameron TF-41 is sourced from Cameron
and their authorized distributors. Aquashield is sourced from Houghton Offshore.
Project Sales Corp recommends buying lubricants from Authorized Sources only.
Disclaimer and Use of Brand NamesDisclaimer and Use of Brand NamesDisclaimer and Use of Brand NamesDisclaimer and Use of Brand Names
Product Use Limited LiabilityProduct Use Limited LiabilityProduct Use Limited LiabilityProduct Use Limited Liability