TRY THIS

1. Main OfficeGunners Guns Advanced Guns Parts Gallery Behind the scenes FAQ Contact
Super Maul
Super Maul
Ruler of the
Office
Cluster Maul
Office
Depot:Ink &
Toner
Ink & Toner
Cartridges for
Less at Office
Depot - Save
Online.
www.O fficeDepot.com
…
Promo This was the first advanced gun and was constructed by Geir. It is made by assembling several Mauly clips and
Papermate a thick rubber band and has tremendous firepower. With a regular pencil as projectile it can penetrate thick
Pens cardboard and empty soda cans. Never point this gun at anyone!
From $.25/ea.
Free Setup & This gun is not practical for random battles, but more of a gun for the determined assassin. This gun IS
Shpg. A+ BBB
Rating. No dangerous!
hidden chrgs.
pensrus.com
Facts
Used Office
Furniture Velocity (average) 28.8 m/s
Liquidated Used
and New - prices
far less than the Velocity (max) 34.4 m/s
competion!
www.NO Lstore.com
Range 16.20 m
Quill® Office CEP @ 2 m (50%) 5.9 cm
Supplies
The Savings You CEP @ 2 m (100%) 20.0 cm
Need Are Alw ays
Here. Shop
September Loading time 7s
Monthly Deals!
www.Q uill.com /Specials
… 4x Mauly 51
Launcher 3x Mauly 32
rubber band
Pencil
Projectile
Larcona staple remover
Pencil: 4.0 g
Projectile weight
Larcona: 18.0 g
Assembly
converted by Web2PDFConvert.com

2. Remove the handles on the Mauly 32's. Mount a Mauly 51 on the outside of
two Mauly 32's as seen in the picture.
Mount another Mauly 51 on the end of the Mauly 32 which isn't entirely covered
by the first Mauly 51. Then put the third Mauly 32 on the end, as seen in the
picture.
Remove the handles on the two Mauly 51's. Note that the gun has been flipped
around in the picture.
Put the rubber band around the row of Mauly 32's and mount a Mauly 51 on
the outside. Make sure the rubber band isn't caught between the Mauly 51 and
the rest of the gun. It has to be able to travel freely.
Mount the last Mauly 51 the same way as in the last step. Remove the handles
on the two Mauly 51's. Make sure the position of the two Mauly 51's on top is
offseted a bit. This makes the gun more stable and easier to fire.
This is the final step. Stretch the rubber band and put it along the outside of
the gun. As seen in the picture, there should be a double layer of rubber band
on the end of the gun.
Make sure the row of Mauly 32's don't have any gaps between them and that they are aligned
properly. Failing to do so may peel off the outer parts of your pencil and reduce fire power and
accuracy.
converted by Web2PDFConvert.com

3. Firing
Put the pencil through the row of Mauly 32's with the bottom end first. Push until it pushes the rubber band on
the other side. Keep the pencil in position with the hand holding the Super Maul and grab the end of the pencil
with your other hand and pull. The longer you pull the further the pencil will go, but make sure you don't pull it too
far. A reasonable part of the pencil has to stay in the barrel to get decent accuracy.
Aim the gun at your intended target and release the pencil.
Mount a laser pen on top or bottom for improved accuracy. Plus it makes the gun more
intimidating and you feel more like an office commando.
The Super Maul can inflict huge amounts of damage when fired from short range, but because the projectile
has a tendency to rotate after a while the long range capability of this gun is rather limited.
We have tried to use a trailing piece of string for stabilizing the gun. That did not work out.
An anonymous fan sent us a clever modification to reduce the wear on the rubber band:
Advanced Guns Ruler of the Office ->
Main OfficeGunners Guns Advanced Guns Parts Gallery Behind the scenes FAQ Contact
Copyright © 2005 www.officeguns.com
converted by Web2PDFConvert.com