Brief talk on static routing configuration experiment
•Descargar como DOC, PDF•
0 recomendaciones•354 vistas
Brief Talk on Static Routing Configuration Experiment Leading Cisco networking products distributor-3anetwork.com
Recomendados
Más contenido relacionado
Más de 3Anetwork com
Más de 3Anetwork com (20)
Último
Último (20)
Brief talk on static routing configuration experiment
- 1. Brief Talk on Static Routing Configuration Experiment Our aim is to communicate between these four routes on this experiment, that is to say, can ping each other. We can see that, when all of the Routers are connected together, the same network segment can visit each other, but how can we make the routing between different network segments that can also access each other? That is static routing configuration. Someone may ask why not use the dynamic routing protocol? Yes, when there are too many devices we would certainly consider giving priority to the use of dynamic routing protocol configuration, because it would be more convenient. However, we are now doing experiment just to master the skill. Here is the each routing configurations for your reference. All routes are using the "NM-4A / S" Interface Router1 Router>en / / Enter into privilege mode Router#conf t / / Enter into configuration mode Router(config)#int s1/0 // Enter into the S1/0 router ports Router(config-if)#ip add 192.168.1.1 255.255.255.0 // Configure the ip address to s1 / 0 port Router(config-if)#clock rate 64000 // Configure the clock to 64000 Router(config-if)#no sh // Start the port Router(config-if)#exit // Exit the s1 / 0 port Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.1.2 //Configure static routing table for the router Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.1.2 // Configure static routing table for the router 1
- 2. Router(config)#exit //Exit the configuration mode Router2 Router>en Router#conf t Router(config)#int s1/0 Router(config-if)#ip add 192.168.1.2 255.255.255.0 Router(config-if)#clock rate 64000 Router(config-if)#no sh Router(config-if)#exit Router(config)#int s1/1 Router(config-if)#:ip add 192.168.2.1 255.255.255.0 Router(config-if)#:clock rate 64000 Router(config-if)#no sh Router(config-if)#exit Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.2 Router(config)#exit Router3 Router>en Router#conf t Router(config)#int s1/1 Router(config-if)#ip add 192.168.2.2 255.255.255.0 Router(config-if)#clock rate 64000 Router(config-if)#no sh Router(config-if)#exit Router(config)#int s1/0 Router(config-if)#ip add 192.168.3.1 255.255.255.0 Router(config-if)#clock rate 64000 Router(config-if)#no sh Router(config-if)#exit Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1 Router(config)#exit Router4 Router>en Router#conf t Router(config)#int s1/0 Router(config-if)#ip add 192.168.3.1 255.255.255.0 Router(config-if)#clock rate 64000 2
- 3. Router(config-if)#no sh Router(config-if)#exit Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.3.1 Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.3.1 Router(config)#exit After the completion of the final configuration, our four routers can visit each other. Now, our experiment is basically completed. More related: About Configuring Cisco Router 2901 / Port Forwarding See detailed Memory Configuration on Cisco 3925 Router Stacking – WS-C3750G-24TS and X-series Cisco 1941 vwic 2 port combine More Cisco products and Reviews you can visit: http://www.3anetwork.com/blog 3Anetwork.com is a world leading Cisco networking products wholesaler, we wholesale original new Cisco networking equipments, including Cisco Catalyst switches, Cisco routers, Cisco firewalls, Cisco wireless products, Cisco modules and interface cards products at competitive price and ship to worldwide. Our website: http://www.3anetwork.com Telephone: +852-3069-7733 Email: info@3Anetwork.com Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong 3