1. HDC User Guide
——Rocking Flower Camera (720P)
-1-
The picture is only for your reference, please subject to our available products (20110525)

2. Menu
1. Production introduction ...................................................................................................................................................................................3
2. Structure outline ..............................................................................................................................................................................................3
3. Status indicator light description .....................................................................................................................................................................4
4. Operation guide ..............................................................................................................................................................................................6
4.1. Power on/off.............................................................................................................................................................................................6
4.2. Working mode switch...............................................................................................................................................................................6
4.3. HD video shooting....................................................................................................................................................................................7
4.4. Fine voice recording.................................................................................................................................................................................7
4.5. Photo taking .............................................................................................................................................................................................8
4.6. Motion detection photo taking ..................................................................................................................................................................9
4.7. Computer camera ..................................................................................................................................................................................10
4.8. Removable disk .....................................................................................................................................................................................10
4.9. Charging and sustainably supplying power with external power source ................................................................................................12
4.10. PC tools ...............................................................................................................................................................................................13
4.11. Setting the date and time .....................................................................................................................................................................13
4.12. Encrypt and decrypt the memory card .................................................................................................................................................14
4.13. Set the camera parameters:.................................................................................................................................................................17
4.14. key accessories specification...............................................................................................................................................................19
5. Related data .................................................................................................................................................................................................21
6. Common problems:.......................................................................................................................................................................................21
7. Warning ........................................................................................................................................................................................................22
-2-

3. 1. Production introduction
Before using the product, please carefully read the user guide and operate the camera strictly under the user guide operation instructions.
Thank you for choosing our camera. As a camera and recorder all in one machine, it has many practical functions. It will certainly bring you
with brand new customer experience with its fashionable external design, stable and excellent quality, and multifunction. It is your must-take
practical tool.
Functions of this camera: HD camera shooting movies, HD shooting pictures, fine voice recording, computer camera, encryption removable
disk etc.
Features of this camera: multifunction, multi-use, fashionable external design, excellent shooting effect, small and portable, easy to use,
stable and reliable, quick to response, data encrypted high safety etc.
The camera can be used in: landscape shooting on bus, snap photography, emergency record, slice of life record, leisure and
entertainment activities record, sports record, teaching supplement record, family security monitoring, criminal investigation evidence taking ,
landscape shooting, our door exploration record, memory aids, etc.
2. Structure outline
The picture is only for your reference, -3-

4. No Item Description
1 Camera To obtain image signal
2 USB interface To link data link or power line
3 Mode key In standby mode, press mode key, switch operating mode.
On and off key/operating It is a multifunctional key, with different function at different mode, including: on, off, start shooting, stop
4
key shooting, start recording, stop recording, photograph etc.
Installed three indicator lights: red, green, and blue; different compound mode indicates different
5 Status indicator light
operating mode
6 Solar battery Supply power for flower swinging
7 Swing flower Delicate and lovely decoration swinging flower
8 TF card slot To insert standard TF memory card (Micro SD card)
3. Status indicator light description
Number Indicator Status or mode description
Not link red, long on: indicates the standby status of video mode.
red
charger red, slow flash: indicates the video shooting is on.
1. Video mode
red, quick flash: indicates memory card is full, malfunction,
red + green + Link charger
no-decryption or unknown breakdown.
Not link
blue
2. Voice recording charger blue, long on: indicates the standby status of voice recording mode.
mode blue, slow flash: indicates the voice recording is on.
blue + green Link charger
+
When not link charger, as the indicator light of photo mode:
Not link red + blue, long on: indicates the standby status of photo mode.
3. Photo mode red + blue
charger red + blue, slow flash: indicates one picture is taken, and is under
processing.
Link the charger, as the indicator light of motion detection mode:
4. Motion detection red + blue red + blue, long on: indicates the standby status of motion detection
+ Link charger
mode + green mode.
red +blue, slow flash: indicates motion detection is on, and analyses
-4-

5. whether image is moving.
red + blue ——> red slow flash: indicates that camera is triggered by
motion image and starts shooting.
Important specification for green light
Green long on: Indicates that the charging is finished.
Green slow flash: Indicates that charging is on.
Green quick flash: indicates a low battery, and will be turned down soon. Please charge the battery as
soon as possible.
Attention:
No matter green lamp combines with any lamp, it only has the function indicating battery status or
green
external power source status, and it has no other functions. Please do not get confused about its
functions.
As camera links the charger or computer, green lamp starts operating charging indication. When it is not
finished, green lamp slow flash; when it’s finished charging, green lamp will be always on.
As the camera does not link charger or computer, it will quick flash to tell you battery power is not enough
when battery is running out. Please charge it as soon as possible.
-5-

6. 4. Operation guide
4.1. Power on/off
Graphical representation: Operating approach: Attention:
Right elevation Power on: If your camera is working, when you
a. On the condition of OFF, press button ON for 3 close the camera, it will
seconds, the camera is on. simultaneously save the video
b. After successfully launching the battery, the shooting profile.
red lamp is on and it is standby situation for
video shooting.
Power off:
a. Press OFF for about 3 seconds, all indicator
lights are off and the camera is off.
4.2. Working mode switch
Graphical representation: Operating approach: Attention:
Left elevation Press mode key in short time, switch working Only in standby situation, user can
mode in turn as follows: switch camera mode. When the camera
is shooting, that is when the working
HD video shooting situation indicator light is flickering,
please stop shooting first.
Voice recording about photo taking and motion
image triggering video shooting
Photo taking（when linking mode:
the charger, it is the motion When the camera links no charger, it
detection video mode） has functions: HD photo taking, fine
voice recording, and photo taking.
-6-

7. When it links charger, it has
functions: HD photo taking, fine voice
recording, motion image detection
photo taking.
4.3. HD video shooting
Graphical representation: Operating approach: Attention:
Before using this function, it should be first switched to In order to guarantee the size and safety
video shooting mode. Under this mode, the of the shooting profile, the system will
indicator lamp is red. spontaneously save profile every once in
a while, and continue video shooting.
Start video shooting: Automatic segmentation of time is
when the red lamp is long on, it indicates that the factory default, please consult local
camera is at the standby status for video shooting. distributors.
Press operating button in short time and start shooting. Please ensure that camera is not
As the camera starts shooting, red lamp will slowly blocked, watch body upright and stable,
flash in regular period. 50cm distance from the record items or
persons in the sufficient lighting
stop shooting: environment in order to get correct
When the red lamp is slowly flashing in regular period, direction, natural color, distinct pictures
it indicates that the camera is at the video shooting and stable images. Do not shelter the
Back elevation mode. At this time if pressing the operating button in pickup part of microphone in order to get
short time, user can stop the camera from shooting. clear voice recording.
After camera stops shooting, the red lamp will switch
from flashing status to long on status.
4.4. Fine voice recording
Graphical representation: Operating approach: Attention:
-7-

8. Before taking this function, user should switch working In order to guarantee the size and safety
mode to voice recording mode. Under voice of the shooting profile, the system will
recording mode, the correspondent indicator light is spontaneously save profile every once in
blue . a while, and continue video shooting.
start recording: Automatic segmentation of time is
When the blue lamp in long on, it indicates that the factory default, please consult local
camera is at the standby of voice recording mode. Press distributors.
the operation button in short time can start recording. Do not shelter the pickup part of
Blue lamp will flicker slowly in regular period if camera microphone in order to get clear voice
starts recording. recording.
stop recording:
When the blue lamp is slowly flashing in regular period,
it indicates that the camera is at the voice recording
mode. At this time if pressing the operating button in
Back elevation short time, user can stop the camera from recording.
After camera stops recording, the blue lamp will switch
from flickering status to long on status.
4.5. Photo taking
Graphical representation: Operating approach: Attention:
When the camera links no computer USB or Photo processing time varies from
charger, user can apply photo taking function. different pixel settings. The higher the
Before applying this function, user should switch the pixel is, the longer the processing takes,
working mode to photo taking mode; under this so does the flickering. Setting method for
mode, the indicator lights are red + blue. photo taking pixel, please refer to
parameter setting in the end of this
taking photos: section.
When red and blue are long on at the same time, it Please ensure that camera is not
indicates that the camera is at the standby status for blocked, watch body upright and stable,
photo taking. Press operating button one time for one 50cm distance from the record items or
Back elevation picture. Every time taking a photo, red and blue lights persons in the sufficient lighting
start flickering simultaneously. When flickering stops, environment in order to get correct
-8-

9. photo taking is finished. direction, natural color, distinct pictures
and stable images.
4.6. Motion detection photo taking
Graphical representation: Operating approach: Attention:
When camera links charger, user can use motion in order to detect the real time motion
Back elevation image to trigger automatic photo taking function. condition for image objective, system will
Before applying this function, user should switch the save the profile every once in a while
working mode to motion detection mode. Under and continue detecting images.
this mode, the correspondent indicator lights are red + Automatic segmentation of time is
blue. factory default, please consult local
distributors.
Start detecting image: Linking charger is a must in
When red and blue lights are long on, it indicates that order to enter the mode.
the camera is at the standby status. Press operating Please ensure that camera is not
button to start detecting image. After camera detecting blocked, watch body upright and stable,
image, red and blue lamps will simultaneously flicker. 50cm distance from the record items or
persons in the sufficient lighting
Start shooting: environment in order to get correct
When image objective motion range exceeds some direction, natural color, distinct pictures
extent, camera can detect and start shooting and stable images. Do not shelter the
automatically. After a while, camera stops shooting and pickup part of microphone in order to get
continues detecting the motion object. If exceeding clear voice recording.
certain extent, camera will continue to start a new
shooting.
Indicator light is red flickering when it is shooting.
Stop monitoring:
Press operating button to stop shooting and monitoring.
Indicator lights are red and blue long on.
-9-

10. 4.7. Computer camera
Graphical representation: Operating approach: Attention:
when camera is at this mode, user can chat with friends According to computer configuration or
Back elevation on the internet or conduct web conference with system difference, computer cannot
colleagues. User can also take sticker photos and other always detect camera function as soon
novel applications though third party WINDOWS as user link it with computer. If camera
software. The approach to enter computer camera mode does not show up accidentally but
mode: enter removable disk mode, please
Under OFF condition, press operating button without remove the camera, and link it to the
letting go, link computer USB interface at the same time, computer once again. The computer
after about 4 seconds, IP camera will finish connecting camera can only support WINDOWS
to internet. system for the time being.
Open MY COMPUTER, IP camera icon will be seen in If user want to disconnect camera with
the window; it indicates that camera function is on. computer, please uninstall the product in
During PCCAM normal functioning, red light indicates proper way.
data communication status; if user is using camera, red
light will slowly flicker, if not using camera function red
light is long on.
4.8. Removable disk
Graphical representation: Operating approach: Attention:
- 10 -

11. The camera has the function of removable disk, user According to computer configuration or
Back elevation can use it as USB flash drive. Under the condition of system difference, computer cannot
removable disk linking properly, user can see your always detect removable -disk function
profile. as soon as user link it with computer. If
not enter this mode, please remove the
Video: This folder is used to save video profile in the device, and link it to the computer once
camera. again. The function can only support
Picture: this folder is used to save camera shooting WINDOWS system for the time being.
photos profile. If user want to disconnect device with
Voice: this folder is used to save voice recording computer, please uninstall the product in
profile. proper way.
When removable disk functioning normally, red light
indicates data communication status. If it is exchanging
data, red light will flicker slowly; if no data exchanging,
red light will be long on.
- 11 -

12. 4.9. Charging and sustainably supplying power with external power source
Graphical representation: Operating approach: Attention:
Charging: This unit is built in with high capacity
Lin it to computer USB or charger, user can charge the polymer lithium battery without memory
camera. effect, which may be charged during use.
When linking computer USB or charger, the green But for the first five times of use, please
indicator light will be on and offer charging information. run out the battery power and then charge
Battery is charging—green light slowly flicker with to the full to activate the highest capacity
uniform velocity. of battery and obtain the standard
Battery has finished charging—green light will always working hours; to maximize the battery
be on. power storage capacity, please continue
to charge for 30 minutes to 1 hour when
External direct current power supply the indicator lamp indicates the full
continually: charging status upon charging every time.
When linking the charger, camera can work while Please make sure that the power supply
charging and user need not worry about the battery complies with the standard USB power
running out. supply specifications.
If user need to supply direct current power supply
through computer USB as camera working power
supply, please uninstall devices (uninstall in operating
system but not pull out the data link), then user can
operate shooting.
- 12 -

13. 4.10. PC tools
The camera carries PC setting tools to set camera date and time, encrypt and
decrypt the memory card. The approach to operate PC tools:
Insert the camera to computer USB interface and wait for computer to detect the
camera.
a. After successful linking with computer, open MY COMPUTER and user will
find two new devices: one is Disk Tools CD room and the other is
removable disk, and PC setting tools are stored in those new CD rooms.
b. Double click the CD room lock-shape icon to open setting tools. Setting
tools are as follows:
attention: Due to the fact that some computer installing antivirus program, it
forbids CD room automatically operating function. Under this condition, user
cannot operate setting tools by double click icon. User can use right hand open command to enter CD room and operate setting tools directly.
The name of setting tool is “DiskTools”.
4.11. Setting the date and time
User can set the date and time property as follows:
a. Open setting tool, click time adjusting button and open setting window.
b. Set the time according to user’ s needs.
year month and date setting: User can input the time or click the right pull down
arrow to open date and time setting panel.
Hour, minute and second setting: User can input the time
get equipment time: click this button user can get the current camera time.
Get PC time: click this button user can get current computer system time that
camera is linked to.
Time adjusting: after adjusting the date and time, click this button to enable the
setting to take effect. Save user setting date and time to camera. synchronically.
- 13 -

14. 4.12. Encrypt and decrypt the memory card
Password setting:
User can set the password for the memory card to protect user’s profile effectively. Under
the condition that other know nothing about the password, they cannot see and edit user’s
data through camera or other card readers. Cryptographic security can effectively protect
user privacy for civil-use products.
a. Open setting tools, double click “set password” and start password setting window.
b. Input password and confirm password in the password input box, make sure the
password is the same twice user inputs in the input box.
- 14 -

15. Attention:
After setting the password, security protection takes effect and user need to
keep the password din mind. If user forget the password, user can only
operate password resetting and have to lose all data in the memory card.
Encryption grade can only reach ordinary level and cannot prevent some
high-tech decryption invasion and password cracking.
Log-in memory card that has already encrypted:
For the encrypted memory card, user need to register by inputting the password otherwise system will offer prompt as the right:
Approach for logging in:
a. Open setting tools, double click “log-in disk”, and open log-in password
input box.
b. Input the correct log-in password, decrypt the memory card that has
been encrypted. After finishing decryption, user can open the
removable disk and read-write the data inside.
c. If user does not input the correct decryption password, user will not be able to access memory card and the system will offer prompt to
insert memory card.
Lock the memory card:
If user needs to go out for a while and be away from computer for other matters, and user does not want others to read the profile inside, then
- 15 -

16. user can lock the disk. It is similar to WINDOW desktop lock function.
Open the setting tools, double click “lock disk”, camera will automatically enter security
protection status. User needs to input password again to read memory card.
Change password:
Log-in memory card with correct password and then open setting tools, double click password changing , camera will popup password input
box, please input the correct old password.
Attention: the new password must be identical with the confirmed password.
- 16 -

17. Clear password:
If user does not want to input password every time read the memory card, user can clear the
password that was set before. The premise of clearing the password is that user have to log-in
memory card with correct password and then user can apply the function to clear password.
After clearing the password, user’s memory card information will not be protected any longer
and other can easily read and write the data inside.
If forgetting the password, please refer to password resetting function:
If user forget the password that was set in memory card, user can apply the password resetting
function and reset password for the memory card. After finishing the resetting user needs to
format the memory card.
Attention:
After using the password resetting function, data in memory card will be lost. Please be
cautious about this.
If using password resetting function, user cannot open the memory card, then it maybe the card’s problem or it is encrypted on other products.
Use encrypted TF card:
If user wants to apply an encrypted TF card to the camera, please link the product to the computer and use the correct password to log-in so
that the camera can correctly record the card information, otherwise user cannot be able to operate the card.
4.13. Set the camera parameters:
The camera is multifunctional, among those functions many parameters are able to be set according to user’s
needs. Parameter setting is placed in SETUP.INI profile under removable disk root directory. Open the profile,
user can edit the parameters.
the profile is automatically generated, even if user delete the files in memory card, it will automatically generate
again and set the parameters as default. For each parameter, their connotation and options available are as
- 17 -

18. follows:
Item Default Available setting value Remarks
Yes: If setting it as parameter, when memory card is full
during shooting process, camera will automatically delete
the earliest profile in the memory card and spare enough
memory space to continue shooting new profile.
CycleRecord No No / Yes No: If setting it as parameter, when the disk space is
running out during shooting, camera will automatically stop
shooting, red light quickly flicker, and automatically turn off
the camera.(under the condition of linking to a charger,
camera will offer malfunctioning prompt all the time and the
camera will stay on. )
Yes: If setting it as parameter, the new shooting video file
will be with date and time watermark on the lower right
corner and indicates the date and time when the video is
Timestamp Yes No / Yes shooting.
No: If setting it as parameter, the new shooting video file will
not be with date and time watermark.
Photo taking pixel setting, for example, if setting pixel as
200, the photo taking pixel will be 2 million pixel,
CameraImageSize 200 200 / 500 / 800 / 1200 distinguishability will be 1600*1200; likewise, if setting
parameter as 1200, the photo taking pixel will be 12 million
pixel,
The function is mainly applied in board camera. Link the
camera with bus direct current output power supply, once the
bus gets started, board charger will automatically operate
AutoRecOnExternPower No No / Yes charging and camera will automatically start and starts
shooting automatically.
Yes: If setting it as parameter, when camera insert in
- 18 -

19. charger, it will turn on and start shooting automatically.
No: If setting it as parameter, when camera insert in
charger, it will turn on automatically but not shoot.
Yes: If setting it as parameter, during the video shooting,
voice recording, and motion detection, indicator lights will
auto hide after 20 seconds.
LedAutoSleep No No / Yes
No: If setting it as parameter, the indicator light will not auto
hide.
4.14. key accessories specification
The following are selected accessories and they are not absolutely necessary. The following items are not absolutely included in the
package from terminal retailers. Please consult the local retailers for detailed information. The picture is only for your reference, please subject
to our available products.
Graphic representation: Name and usage:
Battery charger:
Transfer the civil-use alternating current to accepted standard USB power supply, it is used to
charge the camera and to be as sustainable power source.
- 19 -

20. Car charger:
Transfer the car cigarette lighter direct current to camera accepting standard USB power supply.
It can be used to charge the camera and be used as sustainable power source.
Power supply extended line:
It is a long black line only used to charge the camera and cannot be used as data
link.
Data link:
It is a transparent short line used to link camera and computer USB interface, operate data
transferring. It can be used to charge the camera.
Slip-proof mat
It is a black square rubber mat, with excellent slip-proof function. It can be used to place camera
and prevent camera from slipping during shaking conditions.
- 20 -

21. User’s guide
5. Related data
Item Parameters
Video format AVI
Video encoding M-JPEG
Video resolution 1280 x 720
Player software Player software carried by the operating system or mainstream software
Format of sound recording MP3
Picture resolution 2M – 12M
System supported Windows me/2000/xp/2003/7
Charge pressure DC-5V
Interface type Mini 4 Pin USB
Storage support TF card （Micro SD）
Battery type high-capacity lithium polymer
6. Common problems:
Q: why does the red light(memory card malfunction indicator) quickly flicker after inserting the memory card?
A: The reasons are variable. They maybe: 1. Do not set CycleRecord parameter as NO in the setup.ini file. The memory card has no room and it needs
to link with computer and change the cycling shooting parameters, or delete unnecessary files to make room for it. 2. The memory card has encrypted on
other products or encrypted on this camera but it is a long time ago. Then you can try to insert the memory card to camera and input your password, if it
still cannot work, you can try to reset the password. If password resetting cannot work, then the memory card must be broken down or encrypted by
- 21 -

22. other hig-tech devices. 3. The way you insert the memory card is wrong, it cannot work if it is inserted in a wrong way.
Q: What can be done if camera shows no response to operation command when the camera is system halted?
A: You need to reset the camera. The approach is press mode button and operating button at the same time.
Q: my camera cannot be linked to computer as IP camera or removable disk, why?
A: Firstly, make sure you fully understand the linking approach for IP camera, and operate in correct way. Try more times, if it still cannot be linked to
computer, please check computer USB interface, data link, product USB interface respectively.
7. Warning
 Application: Please strictly abide relevant regulations and laws. This product should not be used for any illegal purposes. The user is
fully responsible for its using purpose.
 Battery: If do not use this recording function after long time, please charged it fully before using.
 File security: This product is not a professional storage device. It does not guarantee the integrity and security of saved files. Please
back up your important documents on the computer or other storage device timely.
 Video quality: This product is not a professional video recording device. It Does not guarantee the effect of the video file to have the
professional quality
 Operating temperature: 0—40°C. For the extension of life, it is best used at room temperature.
 Environment brightness: Do not expose the camera directly to strong light, such as the sun light, to avoid damage to optical devices.
 Cleaning: Do not use it under the environment with high dust density to avoid the contamination of camera lens or other components.
- 22 -