Weaving Presentation By Sukhvir Sabharwal
•Descargar como PPT, PDF•
35 recomendaciones•15,892 vistas
Hi All, pls find Weaving presentation, Hope this would help you. Best, Sukhvir
Recomendados
Más contenido relacionado
La actualidad más candente
La actualidad más candente (20)
Destacado
Destacado (13)
Similar a Weaving Presentation By Sukhvir Sabharwal
Similar a Weaving Presentation By Sukhvir Sabharwal (20)
Más de Sukhvir Sabharwal
Más de Sukhvir Sabharwal (6)
Último
Último (20)
Weaving Presentation By Sukhvir Sabharwal
- 1. Weaving Presentation By:-Sukhvir Sabharwal Triburg /// 1sukhvir.sabharwal.tit07@gmail.com
- 2. Weaving • Interlace between two sets of yarn • Weaving is the crossing of yarns at right angles or strips of other materials to produce a flat, more or less compact surface. 2 sukhvir.sabharwal.tit07@gmail.com
- 3. Weaving Preparatory Process • Before weaving, the weaver beam needs some few operations before placing the beam on loom • Warping • Sizing • Drawing 3sukhvir.sabharwal.tit07@gmail.com
- 4. Warping • To make bigger package to supply warp yarn • Yarn with uniform tension 4sukhvir.sabharwal.tit07@gmail.com
- 5. Sizing • The purpose of sizing to increase weaving resistance • Resistance against abrasion 5 sukhvir.sabharwal.tit07@gmail.com
- 6. Drawing in • The drawing-in of the sized warp threads through the heald eyes, reeds and drop-wires of the loom • May be done either manually by a pair of workers 6 sukhvir.sabharwal.tit07@gmail.com
- 7. Types of Looms • Hand loom • Power Loom • Jacquard Looom • Air Jet Loom • Water Jet Loom • Rapier Loom • Sulzer Loom • Projectile 7sukhvir.sabharwal.tit07@gmail.com
- 9. • Handloom : weaver could sit at the centre of the loom and merely pull the handle to make the shuttle move from one end of the fabric to insert a weft thread. 9sukhvir.sabharwal.tit07@gmail.com
- 10. • Power loom : Earlier version of power loom were run by two man. Soon power looms were driven by steam and most of the wooden parts were replaced with iron. The average speed of the power loom had increased from 60 to 140 picks per minute with the rise on productivity. • Productivity of this m/c is very low upto 20 to 24 meter per day • The weft insertion is done thru shuttle which has a capecity of 10 meter, iot means after every 10 meter there will be a knot 10sukhvir.sabharwal.tit07@gmail.com
- 11. • Automatic Loom/Shuttleless loom : Traditional Power looms were stopped every few minutes in order to replace the empty weft pirns in the shuttle and this limited the number of looms, a weaver could operate to about four. Later an automatic weft transfer system which replaced the weft pirn in the shuttle without slowing or stopping the loom. The average speed of the Automatic loom is 100 to 200 meter per day. • 11sukhvir.sabharwal.tit07@gmail.com
- 12. • Shuttleless Loom : The dynamic problems created by the picking and checking mechanism and the inherent process of pirn winding for shuttle looms had encouraged the loom makers to develop alternative means of weft insertion in which heavy shuttle is not projected forwards and backwards across the width of the loom. It is customary to refer these looms as shuttleless looms. 12sukhvir.sabharwal.tit07@gmail.com
- 13. • MAJOR FAULTS • Starting Mark • Double Pick • Brocken Pick • Thick Place • Miss Pick • CUTTABLE FAULTS • Crack • Tear • Fabric Cut • Multiple Breakage • Float • CONTINUOUS FAULTS • Wrong Pattern • Missing End • Stitches • Reed Cut • Temple Cut • MENDABLES • Loom Fly • Bent Pick • Hanging Thread • Snarling • Loops 13sukhvir.sabharwal.tit07@gmail.com
- 15. The production technology has not changed much over time Warp beam Krill The warping looms at Lowell Mills in 1854, Massachusetts 15sukhvir.sabharwal.tit07@gmail.com
- 17. Woven structures Plain weave 17sukhvir.sabharwal.tit07@gmail.com
- 18. Woven structures Twill weave Twill weave, the secondbasic weave, is characterized by diagonal lines running at angles varying between 15° and 75°. A twill weave is denoted by using numbers above and bellow a line (such as 2/1 twill which may be interpreted as two up and one down in the shedding sequence). 18sukhvir.sabharwal.tit07@gmail.com
- 19. Woven structure Satin and Sateen weave Sateen weave is the third basic weave, in which the interlacing points are arranged in a similar way to twill weaves but without showing the twill line. The satin weave is warp face weave and the sateen is a filling face weave. Fig. Shows 5 ends (Harness) satin. In this case, the repeat is on 5 ends x 5 picks. 19sukhvir.sabharwal.tit07@gmail.com