82 88 lincoln continental air lift 1000 rear air spring kit!
1. PR Log - Global Press Release Distribution
82-88 Lincoln Continental Air Lift 1000 Rear Air Spring Kit!
By Airsuspension.com
Dated: Jun 14, 2010
Rigid steel factory suspensions allow load hauling capacity, but you have to sacrifice a smooth ride.
Smooth ride suspensions can't carry heavy loads; heavy springs ride rough, especially when your
Continental is unloaded.
Rigid steel factory suspensions allow load hauling capacity, but you have to sacrifice a smooth ride.
Smooth ride suspensions can't carry heavy loads; heavy springs ride rough, especially when your
Continental is unloaded.
http://www.youtube.com/watch?v=cinETiBFxSA
So why not have both great hauling ability and a smooth ride? Air Lift 1000 adjustable air springs solve
both problems by allowing you to tune your Lincoln Continental suspension under all load and road
conditions. Just add air when towing or hauling and then remove air for a softer ride when unloaded.
Worn tires can affect your car's fuel efficiency and steering response. They can even introduce safety
issues. That's the reason it is critical that you ensure they're in good condition. Otherwise, you might place
yourself, your passengers, and other drivers and pedestrians at risk.
There are several factors that can contribute to prematurely worn treads. Each one causes a slightly
different type of wearing that should be distinguishable by sight. In this article, we'll take a closer look at
identifying the problem. I'll also describe some of the most common reasons tires wear down ahead of
schedule.
Most tires that are sold today have bars integrated in the grooves. These bars are used to identify how far
the treads have worn. If the bars are exposed, that means your tire has experienced wearing to the point that
it should be replaced.
Many drivers are unaware these wear bars exist. In their defense, some wheels are not equipped with them.
Fortunately, you can use a penny to easily determine whether the treads are worn too far. Stick a penny into
the grooves with Abraham Lincoln's head turned upside down. If the top of his head becomes hidden, that's
a sign your treads still have life in them. If you can see Lincoln's entire head, you need to buy replacements.
The tie rod ends that are a part of your steering linkage system can become worn over time. When they
wear down, the toe can eventually become misaligned. This is also the case in the event the tie rod ends
become bent.
In a rack and pinion system, the inner tie rod ends are hard to inspect because they're enclosed in plastic or
rubber bellows. That said, you can test the steering by putting your vehicle in "park" and turning the
steering wheel back and forth while a friend inspects the play. If there is looseness, that strongly suggests a
problem with the toe alignment.
Your car's suspension system relies heavily on coil and leaf springs to keep the frame of the vehicle
properly elevated. Like other components, the springs gradually wear down. When that happens, your car's
frame lowers during operation. This creates a problem with your wheel alignment - specifically, camber
and caster. Left unresolved, it will gradually cause your treads to wear down prematurely.
Page 1/2
2. PR Log - Global Press Release Distribution
The struts and shocks of your suspension system can also cause a problem. When they become worn, your
vehicle will bounce up and down excessively during operation. That can cause cupping, a form of wear that
looks like dipping on one side of the wheel.
Over inflation and under inflation can both contribute to premature wearing in your tires. The former
creates excess wear in the center of the treads as the result of too much air pressure extending that portion
of the wheel. A lot of people over inflate their tires as a temporary solution to a slow leak.
Under inflation places the wearing on the shoulders of the tire. This occurs because a lack of air pressure
causes the tread to be more pliable. As such, a greater area makes contact with the road.
The Air Lift 1000 kits are engineered as an add-on helper spring for coil spring suspensions, front or rear.
The polyurethane cylinders fit easily inside existing coil springs without any special tools. Air pressure can
be adjusted to adapt for additional loads and to obtain desired suspension firmness. For more information,
please visit: http://www.airsuspension.com/lincoln-continental-suspension-s/38.htm
Category Automotive
Tags lincoln continental shock absorbers, struts, shocks, air springs, coil springs, air bags, air shocks,
conversion kits
Email Click to email author
City/Town Roxboro
State/Province North Carolina
Country United States
Page 2/2