Lad configuration

1. CN D&T Group
IAD Configuration (SS)
V1.1

2. 2
Objects
1. Configuration of SPC Property
2. Configuration of SPC Capacity
3. IAD Gateway Cluster Configuration
4. Configuration of Data Area Capacity
5. Zone to Card Configuration
6. Reboot the SPC Card
7. IAD Node Configuration
8. IAD User Configuration
9. TID Default Attribute Configuration
10. Configuration of the TID Name
These slides will show you the details about IAD configuration
on SS. Including the following steps:

3. 3
Configuration of SPC Property
We must select Call & H.248 in processing scope to configure
IAD on particular SPC Card
Right Click SS Configure Management Globe
Configuration SS Data Configuration Shelf
Configuration Right Click SPC Card Property
Configuration

4. 4
Configuration of SPC Property
Chennai IAD has Configured in 3rd Shelf 14th SPC Card
(LSQ=94)
LSQ= [(Shelf No.-1)*40+Slot No.]

5. 5
Configuration of SPC Capacity
Right Click SS Configure Management Globe
Configuration SS Data Configuration Shelf
Configuration Right Click SPC Card Property
Configuration
The Capacity should be filled in according to the actual situation
For IAD, the following should be configured.
 Capacity of the TID text
 Subscriber Capacity
 Maximum Nodes

6. 6
Configuration of SPC Capacity

7. 7
IAD Gateway Cluster Configuration
Gateway Cluster is the set of gateway nodes with the same
properties. The nodes with different equipment types cannot
exist in the same gateway cluster. In the SS system, SPC data
area and hundred groups are allocated in the unit of gateway
cluster. Before addition of IAD equipment, the gateway cluster
where this IAD equipment resides should be configured.
Right Click SS Configure Management

8. 8
IAD Gateway Cluster Configuration

9. 9
IAD Gateway Cluster Configuration
Chennai IAD Zone=100
Area Code=44

10. 10
Configuration of Data Area Capacity
 The SPC of SS control equipment processes calls & protocols
based on the gateway cluster. After a gateway cluster is added,
we need to allocate an SPC for it.
 Right Click SS Configure Management Globe
Configuration SS Data Configuration Shelf
Configuration Right Click SPC Card Data Area Capacity
Configuration Click “Add”

11. 11
Configuration of Data Area Capacity

12. 12
Configuration of Data Area Capacity

13. 13
Configuration of Data Area Capacity

14. 14
Zone to Card Configuration
We must allocate services, protocols and authentication of users in
the zone (gateway cluster) to the SPC board for processing.

15. 15
Configuration of Data Area Capacity
Chennai Zone=100
SPC Card=94

16. 16
Reboot the SPC Card
 Right Click SS and Select Command Line Terminal

17. 17
Reboot the SPC Card
 Command: 1211:3, 14,”YYYYMMDD”

18. 18
IAD Node Configuration
 Double Click on the zone to which a node is added to enter
the zone

19. 19
IAD Node Configuration
Chennai Node ID=100
Chennai IAD IP=10.64.2.22

20. 20
IAD Node Configuration
Device Property

21. 21
IAD User Configuration
 DNHM Configuration
1. Local Office Code
Click Add and Select Add Local Office Code

22. 22
IAD User Configuration
 Chennai Area Code=44
 Office Code for IAD=8888
 User No. Length=3

23. 23
IAD User Configuration
2. Configuration of the Hundred Group
Click Add and Select Add Hundred Set
Click the Hundred groups to be allocated, and press [<], this hundred group will
be moved to the list on the left, which means that this hundred group will be
allocated to the Zone.

24. 24
IAD User Configuration
 Local Office User Configuration
User Configuration Local Office User Configuration Click
“Add”

25. 25
TID Default Attribute Configuration
 Here we have to specify the default property template and
packet template ID for different terminal types.
 Enter in to the Zone and Select Default Attribute Configuration

26. 26
TID Default Attribute Configuration
 Click “Add” Subscriber

27. 27
TID Default Attribute Configuration
 RTP

28. 28
Configuration of the TID Name
 TID Name is the terminal ID in the H.248 protocol, used for
identifying the physical termination point (user circuit) and the
logic termination point (RTP Port).

29. 29
Configuration of the TID Name
 Select “Add” then “Add TID Name”
User Circuit

30. 30
Configuration of the TID Name
 RTP Port

31. univ.zte.com.cn